mirror of
https://github.com/luc-github/ESP3D.git
synced 2025-10-24 11:50:52 -07:00
move 3.0 branch link to wiki
add docs in wiki (need to change txt format to md format in futur) remove outdated webUI
This commit is contained in:
Luc
@@ -1,175 +0,0 @@
|
||||
* Change STA SSID
|
||||
[ESP100]<SSID>
|
||||
if authentication is on, need admin password
|
||||
[ESP100]<SSID>pwd=<admin password>
|
||||
|
||||
* Change STA Password
|
||||
[ESP101]<Password>
|
||||
if authentication is on, need admin password
|
||||
[ESP101]<Password>pwd=<admin password>
|
||||
|
||||
* Change Hostname
|
||||
[ESP102]<hostname>
|
||||
if authentication is on, need admin password
|
||||
[ESP102]<hostname>pwd=<admin password>
|
||||
|
||||
* Change Wifi mode (STA/AP)
|
||||
[ESP103]<mode>
|
||||
if authentication is on, need admin password
|
||||
[ESP103]<mode>pwd=<admin password>
|
||||
|
||||
* Change STA IP mode (DHCP/STATIC)
|
||||
[ESP104]<mode>
|
||||
if authentication is on, need admin password
|
||||
[ESP104]<mode>pwd=<admin password>
|
||||
|
||||
* Change AP SSID
|
||||
[ESP105]<SSID>
|
||||
if authentication is on, need admin password
|
||||
[ESP105]<SSID>pwd=<admin password>
|
||||
|
||||
* Change AP Password
|
||||
[ESP106]<Password>
|
||||
if authentication is on, need admin password
|
||||
[ESP106]<Password>pwd=<admin password>
|
||||
|
||||
* Change AP IP mode (DHCP/STATIC)
|
||||
[ESP107]<mode>
|
||||
if authentication is on, need admin password
|
||||
[ESP107]<mode>pwd=<admin password>
|
||||
|
||||
* Set wifi on/off
|
||||
[ESP110]<state>
|
||||
state can be ON, OFF, RESTART
|
||||
if authentication is on, need admin password
|
||||
[ESP110]<state>pwd=<admin password>
|
||||
|
||||
* Get current IP
|
||||
[ESP111]<header answer>
|
||||
|
||||
* Get hostname
|
||||
[ESP112]<header answer>
|
||||
|
||||
*Get/Set pin value
|
||||
[ESP201]P<pin> V<value> [PULLUP=YES RAW=YES ANALOG=NO ANALOG_RANGE=255 CLEARCHANNELS=NO]pwd=<admin password>
|
||||
if no V<value> get P<pin> value
|
||||
if V<value> 0/1 set INPUT_PULLUP value, but for GPIO16 INPUT_PULLDOWN_16
|
||||
GPIO1 and GPIO3 cannot be used as they are used for serial
|
||||
if PULLUP=YES set input pull up, if not set input
|
||||
if RAW=YES do not set pinmode just read value
|
||||
|
||||
* Output to oled column C and line L
|
||||
[ESP210]C=<col> L=<line> T=<Text>
|
||||
|
||||
* Output to oled line 1
|
||||
[ESP211]<Text>
|
||||
|
||||
* Output to oled line 2
|
||||
[ESP212]<Text>
|
||||
|
||||
* Output to oled line 3
|
||||
[ESP213]<Text>
|
||||
|
||||
* Output to oled line 4
|
||||
[ESP214]<Text>
|
||||
|
||||
* Delay command
|
||||
[ESP290]<delay in ms>[pwd=<user password>]
|
||||
|
||||
* Give EEPROM Version detected
|
||||
[ESP300]
|
||||
|
||||
*Get full EEPROM settings content
|
||||
but do not give any passwords
|
||||
can filter if only need wifi or printer
|
||||
[ESP400]<network/printer>
|
||||
|
||||
*Set EEPROM setting
|
||||
position in EEPROM, type: B(byte), I(integer/long), S(string), A(IP address / mask)
|
||||
[ESP401]P=<position> T=<type> V=<value> pwd=<user/admin password>
|
||||
|
||||
Positions:
|
||||
* EP_WIFI_MODE 0 //1 byte = flag
|
||||
* EP_STA_SSID 1 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
||||
* EP_STA_PASSWORD 34 //65 bytes 64 +1 = string ;warning does not support multibyte char like chinese
|
||||
* EP_STA_IP_MODE 99 //1 byte = flag
|
||||
* EP_STA_IP_VALUE 100 //4 bytes xxx.xxx.xxx.xxx
|
||||
* EP_STA_MASK_VALUE 104 //4 bytes xxx.xxx.xxx.xxx
|
||||
* EP_STA_GATEWAY_VALUE 108 //4 bytes xxx.xxx.xxx.xxx
|
||||
* EP_BAUD_RATE 112 //4 bytes = int
|
||||
* EP_STA_PHY_MODE 116 //1 byte = flag
|
||||
* EP_SLEEP_MODE 117 //1 byte = flag
|
||||
* EP_CHANNEL 118 //1 byte = flag
|
||||
* EP_AUTH_TYPE 119 //1 byte = flag
|
||||
* EP_SSID_VISIBLE 120 //1 byte = flag
|
||||
* EP_WEB_PORT 121 //4 bytes = int
|
||||
* EP_DATA_PORT 125 //4 bytes = int
|
||||
* EP_OUTPUT_FLAG 129 //1 bytes = flag
|
||||
* EP_HOSTNAME 130//33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
||||
* EP_DHT_INTERVAL 164//4 bytes = int
|
||||
* EP_FREE_INT2 168//4 bytes = int
|
||||
* EP_FREE_INT3 172//4 bytes = int
|
||||
* EP_ADMIN_PWD 176//21 bytes 20+1 = string ; warning does not support multibyte char like chinese
|
||||
* EP_USER_PWD 197//21 bytes 20+1 = string ; warning does not support multibyte char like chinese
|
||||
* EP_AP_SSID 218 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
||||
* EP_AP_PASSWORD 251 //65 bytes 64 +1 = string ;warning does not support multibyte char like chinese
|
||||
* EP_AP_IP_VALUE 316 //4 bytes xxx.xxx.xxx.xxx
|
||||
* EP_AP_MASK_VALUE 320 //4 bytes xxx.xxx.xxx.xxx
|
||||
* EP_AP_GATEWAY_VALUE 324 //4 bytes xxx.xxx.xxx.xxx
|
||||
* EP_AP_IP_MODE 329 //1 byte = flag
|
||||
* EP_AP_PHY_MODE 330 //1 byte = flag
|
||||
* EP_FREE_STRING1 331 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
||||
* EP_DHT_TYPE 460 //1 bytes = flag
|
||||
* EP_TARGET_FW 461 //1 bytes = flag
|
||||
|
||||
*Get available AP list (limited to 30)
|
||||
output is JSON or plain text according parameter
|
||||
[ESP410]<plain>
|
||||
|
||||
*Get current settings of ESP3D
|
||||
output is JSON or plain text according parameter
|
||||
[ESP420]<plain>
|
||||
|
||||
* Get/Set ESP mode
|
||||
cmd can be RESET, SAFEMODE, CONFIG, RESTART
|
||||
[ESP444]<cmd>
|
||||
if authentication is on, need admin password for RESET, RESTART and SAFEMODE
|
||||
[ESP444]<cmd>pwd=<admin password>
|
||||
|
||||
* Send GCode with check sum caching right line numbering
|
||||
[ESP500]<gcode>
|
||||
|
||||
* Send line checksum
|
||||
[ESP501]<line>
|
||||
|
||||
* Change / Reset user password
|
||||
[ESP555]<password>pwd=<admin password>
|
||||
if no password set it use default one
|
||||
|
||||
* Send Notification
|
||||
[ESP600]msg [pwd=<admin password>]
|
||||
|
||||
* Set/Get Notification settings
|
||||
[ESP610]type=<NONE/PUSHOVER/EMAIL/LINE> T1=<token1> T2=<token2> TS=<Settings> [pwd=<admin password>]
|
||||
Get will give type and settings only not the protected T1/T2
|
||||
|
||||
* Read SPIFFS file and send each line to serial
|
||||
[ESP700]<filename>
|
||||
|
||||
* Format SPIFFS
|
||||
[ESP710]FORMAT pwd=<admin password>
|
||||
|
||||
* SPIFFS total size and used size
|
||||
[ESP720]<header answer>
|
||||
|
||||
* Get fw version and basic information
|
||||
[ESP800]<header answer>
|
||||
|
||||
* Get fw target
|
||||
[ESP801]<header answer>
|
||||
|
||||
* Get state / Set Enable / Disable Serial Communication
|
||||
[ESP900]<ENABLE/DISABLE>
|
||||
|
||||
|
||||
|
||||
@@ -1,18 +0,0 @@
|
||||
<HTML>
|
||||
<HEAD>
|
||||
<title>404 page</title>
|
||||
</HEAD>
|
||||
<BODY STYLE="background-color: lightblue;">
|
||||
<CENTER>
|
||||
<H1>
|
||||
<svg width='24' height='24' viewBox='0 0 1300 1200'>
|
||||
<g transform='translate(50,1200) scale(1, -1)'>
|
||||
<path fill='red' d='M600 1177q117 0 224 -45.5t184.5 -123t123 -184.5t45.5 -224t-45.5 -224t-123 -184.5t-184.5 -123t-224 -45.5t-224 45.5t-184.5 123t-123 184.5t-45.5 224t45.5 224t123 184.5t184.5 123t224 45.5zM600 1027q-116 0 -214.5 -57t-155.5 -155.5t-57 -214.5q0 -120 65 -225 l587 587q-105 65 -225 65zM965 819l-584 -584q104 -62 219 -62q116 0 214.5 57t155.5 155.5t57 214.5q0 115 -62 219z' />
|
||||
</g>
|
||||
</svg>404 Error, unknown page!</H1>
|
||||
<H2>What are you doing here ?</H2>
|
||||
You are not supposed to find this location...
|
||||
</CENTER>
|
||||
</BODY>
|
||||
</HTML>
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 1.1 KiB |
Binary file not shown.
@@ -1,74 +0,0 @@
|
||||
[
|
||||
{
|
||||
"name": "",
|
||||
"glyph": "",
|
||||
"filename": "",
|
||||
"target": "",
|
||||
"class": "",
|
||||
"index": 0
|
||||
},
|
||||
{
|
||||
"name": "",
|
||||
"glyph": "",
|
||||
"filename": "",
|
||||
"target": "",
|
||||
"class": "",
|
||||
"index": 1
|
||||
},
|
||||
{
|
||||
"name": "",
|
||||
"glyph": "",
|
||||
"filename": "",
|
||||
"target": "",
|
||||
"class": "",
|
||||
"index": 2
|
||||
},
|
||||
{
|
||||
"name": "",
|
||||
"glyph": "",
|
||||
"filename": "",
|
||||
"target": "",
|
||||
"class": "",
|
||||
"index": 3
|
||||
},
|
||||
{
|
||||
"name": "",
|
||||
"glyph": "",
|
||||
"filename": "",
|
||||
"target": "",
|
||||
"class": "",
|
||||
"index": 4
|
||||
},
|
||||
{
|
||||
"name": "",
|
||||
"glyph": "",
|
||||
"filename": "",
|
||||
"target": "",
|
||||
"class": "",
|
||||
"index": 5
|
||||
},
|
||||
{
|
||||
"name": "",
|
||||
"glyph": "",
|
||||
"filename": "",
|
||||
"target": "",
|
||||
"class": "",
|
||||
"index": 6
|
||||
},
|
||||
{
|
||||
"name": "",
|
||||
"glyph": "",
|
||||
"filename": "",
|
||||
"target": "",
|
||||
"class": "",
|
||||
"index": 7
|
||||
},
|
||||
{
|
||||
"name": "",
|
||||
"glyph": "",
|
||||
"filename": "",
|
||||
"target": "",
|
||||
"class": "",
|
||||
"index": 8
|
||||
}
|
||||
]
|
||||
@@ -1,9 +0,0 @@
|
||||
Commands.txt list all ESP commands
|
||||
wconfig.txt list all parameters for SD file config
|
||||
flash.docx explain how to flash
|
||||
Files directory contain all files needed by ESP3D
|
||||
- index.html.gz // main ui file (mandatory)
|
||||
- 404.htm // custom 404 page (optional)
|
||||
- favicon.ico //custom browser esp3D icon (optional)
|
||||
- macrocfg.json //macro command file (optional)
|
||||
|
||||
Reference in New Issue
Block a user