mirror of
https://github.com/luc-github/ESP3D.git
synced 2025-10-24 11:50:52 -07:00
b40937122a
* Update esp3d_version.h * Fix GCode client is not processed * Update lua engine to 1.0.3 * Fix HOOKS and Init script conflicting at boot * Add a queue for multiple scripts (max 5) * Fix compilation failed on SERIAL_MKS on ESP32 * Explain better sanity check on SERIAL_MKS and DISPLAY * Implement USB Serial OTG
49 lines
1.5 KiB
Lua
49 lines
1.5 KiB
Lua
--[[
|
|
Detect push button
|
|
|
|
This example detects a push button connected to pin 4 and sends the command
|
|
to the printer screen when the button is pressed.
|
|
|
|
The push button is connected to pin 4 and the LOW value is when the button
|
|
is pressed.
|
|
|
|
Put this script in the ESP3D flash file system and call it from the init script in
|
|
configuration.h.
|
|
#define ESP_AUTOSTART_SCRIPT "[ESP300]/FS/detectpush.lua"
|
|
|
|
You can also start it manually from the serial monitor by typing:
|
|
[ESP300]/FS/detectpush.lua
|
|
|
|
Be sure to have the following line comment out in the configure.h:
|
|
#define ESP_LUA_INTERPRETER_FEATURE
|
|
]]--
|
|
|
|
-- Setup
|
|
-- pin 0 is connected to the push button
|
|
local pin = 0
|
|
-- LOW is the value when the button is pressed
|
|
local trigger_value = LOW
|
|
-- send ESP3D command to display current IP address to the printer screen
|
|
local command = "[ESP212]IP:%ESP_IP%\n"
|
|
-- variable to read the pin value
|
|
local pinval
|
|
local lastpush = millis()
|
|
-- define the pin mode
|
|
pinMode(pin, INPUT_PULLUP)
|
|
-- Main loop
|
|
while (true) do
|
|
-- read the pin value
|
|
pinval = digitalRead(pin)
|
|
-- if the pin value is `trigger_value` then send the command
|
|
if (pinval == trigger_value) then
|
|
-- do not overflow the system so only send command if at least 1 second elapsed since last one
|
|
if ((millis()-lastpush) > 1000) then
|
|
lastpush = millis()
|
|
-- send the command to the esp3d
|
|
print(command)
|
|
end
|
|
end
|
|
-- yield to other tasks
|
|
yield()
|
|
end
|