USB4VC/user_program/setup.txt

-----------
Preparing SD card image for public release:

double check wpa_supplicant in /etc DOES NOT contain my own WiFi password
Put BLANK wpa_supplicant.conf in /boot
use the same base image for the same minor version, manually copy over the files, dont just dump the developement SD card.

-----------
Fresh install setup

raspbi-config
enable SPI, I2C, Serial (NO LOGIN SHELL)

sudo apt install git

set up ssh:
ssh-keygen
copy PC pub key to rpi ~/.ssh/authorized_keys

------------

IMPORTANT !!!!!!!!!!!!!!!!!!

sudo apt update
sudo apt upgrade

-------------
# use sudo -E to preserve environmental variables for python3
sudo apt-get update

sudo apt-get install i2c-tools
sudo apt install stm32flash

stm32flash -r PBFW_IBMPC_PBID1_V0_2_0.dfu -a 0x3b /dev/i2c-1

sudo apt install dfu-util
sudo dfu-util --device ,0483:df11 -a 0 -D ~/usb4vc/firmware/PBFW_ADB_PBID2_V0_1_1.dfu

-----
sudo apt install evtest
pip3 install evdev


sudo apt install python3-pip

raspberry pi 5 uses a different GPIO chip, this is a compatibility package

// no need
sudo apt remove python3-rpi.gpio
// no need?
sudo pip3 install --break-system-packages rpi-lgpio

cd ~;git clone https://github.com/atar-axis/xpadneo.git
sudo apt-get install dkms raspberrypi-kernel-headers 

https://github.com/atar-axis/xpadneo
--------------

sudo mv /usr/lib/python3.11/EXTERNALLY-MANAGED /usr/lib/python3.11/EXTERNALLY-MANAGED.old
-----

Luma OLED driver

https://luma-oled.readthedocs.io/en/latest/software.html
sudo apt-get update
sudo apt-get install python3 python3-pip python3-pil libjpeg-dev zlib1g-dev libfreetype6-dev liblcms2-dev libopenjp2-7 -y
sudo -H pip3 install luma.oled

-------------------
remove CTRL+ALT+DELETE reboot

sudo rm /lib/systemd/system/ctrl-alt-del.target
sudo ln -s /dev/null /lib/systemd/system/ctrl-alt-del.target
sudo systemctl daemon-reload
-------------------

run script on launch:

MAKE SURE SERIAL LOGIN SHELL IS TURNED OFF

https://raspberrypi-guide.github.io/programming/run-script-on-boot

sudo su


sudo nano /etc/rc.local

echo 1 > /sys/module/bluetooth/parameters/disable_ertm
cd /home/pi/usb4vc/rpi_app; python3 keep_alive.py 2>&1 | tee -a /home/pi/usb4vc/usb4vc_debug_log.txt &

kill -SIGINT pid

-----------
xbox one bluetooth driver

https://github.com/atar-axis/xpadneo

echo 'options bluetooth disable_ertm=Y' | sudo tee -a /etc/modprobe.d/bluetooth.conf

------------
boot speedup:

sudo nano /boot/firmware/config.txt
disable_splash=1
boot_delay=0

sudo nano /boot/firmware/cmdline.txt

Add quiet after rootwait

-------------

usb auto mount:

sudo apt install usbmount

sudo nano /lib/systemd/system/systemd-udevd.service

change to PrivateMounts=no

-----------

zero out free space to compress better:

cat /dev/zero > ./zero.file
wait until it exits
sync
rm zero.file

-----------

usb folder format:

usb root:

usb4vc_data
	rpi_app
		source code of raspberry pi application
	firmware
		dfu file for protocol boards
		naming format: PBFW_IBMPC_PBID1_V0_1_0.dfu
	config
		config and mapping files


--------------

Raspberry Pi 5 Controller test:

WIRED

Xbox 360 wired: cant find the controller
Xbox One: OK
Xbox Series X: OK
PS4: ok
PS5: ok
Swich Pro: OK

BLUETOOTH

Xbox One: NO
Xbox Series X: NO
PS4: OK
PS5: 
Swich Pro: 

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx NO LONGER NEEDED xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

raspberry pi 3
before speedup:

19.16
18.07
19.11
18.37


after speedup:

16.95
16.45
--------------
Nintendo Pro controller
https://retropie.org.uk/docs/Nintendo-Switch-Controllers/

sudo apt install git
sudo apt install dkms
sudo apt-get install libudev-dev
sudo apt-get install libevdev-dev

git clone https://github.com/nicman23/dkms-hid-nintendo
cd dkms-hid-nintendo
sudo dkms add .
sudo dkms build nintendo -v 3.2
sudo dkms install nintendo -v 3.2

git clone https://github.com/DanielOgorchock/joycond.git
cd joycond
cmake .
sudo make install
sudo systemctl enable --now joycond

----------------------

Serial setup:

serial clock is tied to GPU clock, need to fix it for it to be stable

sudo nano /boot/config.txt, add:
gpu_freq=250
gpu_freq_min=250

also, use /dev/serial0 to maintain compatibility for all models of pi

--------------

relaunch if exits:

while true; do echo think; sleep 1; done


---------

serial format:

U4 CMD_TYPE PAYLOAD

U4 header, any command not beginning with U4 is ignored

CMD TYPE:
SC: Shell Command, execute whatever follows in shell
RF: Read File
WF: Write File
GG: get gamepad file
QUIT: quit program

U4 RF /home/pi/usb4vc_data/config.json
U4 WF /home/pi/usb4vc_data/test.txt c3NoIHBpQDE5Mi4xNjguMS41Ng==