mirror of
https://github.com/dekuNukem/USB4VC.git
synced 2025-10-31 11:26:46 -07:00
336 lines
8.9 KiB
C
336 lines
8.9 KiB
C
/**
|
|
******************************************************************************
|
|
* File Name : stm32f0xx_hal_msp.c
|
|
* Description : This file provides code for the MSP Initialization
|
|
* and de-Initialization codes.
|
|
******************************************************************************
|
|
** This notice applies to any and all portions of this file
|
|
* that are not between comment pairs USER CODE BEGIN and
|
|
* USER CODE END. Other portions of this file, whether
|
|
* inserted by the user or by software development tools
|
|
* are owned by their respective copyright owners.
|
|
*
|
|
* COPYRIGHT(c) 2023 STMicroelectronics
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f0xx_hal.h"
|
|
extern void _Error_Handler(char *, int);
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
/**
|
|
* Initializes the Global MSP.
|
|
*/
|
|
void HAL_MspInit(void)
|
|
{
|
|
/* USER CODE BEGIN MspInit 0 */
|
|
|
|
/* USER CODE END MspInit 0 */
|
|
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/* System interrupt init*/
|
|
/* SVC_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(SVC_IRQn, 0, 0);
|
|
/* PendSV_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(PendSV_IRQn, 0, 0);
|
|
/* SysTick_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
|
|
|
|
/* USER CODE BEGIN MspInit 1 */
|
|
|
|
/* USER CODE END MspInit 1 */
|
|
}
|
|
|
|
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if(hi2c->Instance==I2C2)
|
|
{
|
|
/* USER CODE BEGIN I2C2_MspInit 0 */
|
|
|
|
/* USER CODE END I2C2_MspInit 0 */
|
|
|
|
/**I2C2 GPIO Configuration
|
|
PB13 ------> I2C2_SCL
|
|
PB14 ------> I2C2_SDA
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_I2C2;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_I2C2_CLK_ENABLE();
|
|
/* USER CODE BEGIN I2C2_MspInit 1 */
|
|
|
|
/* USER CODE END I2C2_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
|
|
{
|
|
|
|
if(hi2c->Instance==I2C2)
|
|
{
|
|
/* USER CODE BEGIN I2C2_MspDeInit 0 */
|
|
|
|
/* USER CODE END I2C2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_I2C2_CLK_DISABLE();
|
|
|
|
/**I2C2 GPIO Configuration
|
|
PB13 ------> I2C2_SCL
|
|
PB14 ------> I2C2_SDA
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
|
|
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_14);
|
|
|
|
/* USER CODE BEGIN I2C2_MspDeInit 1 */
|
|
|
|
/* USER CODE END I2C2_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if(hspi->Instance==SPI1)
|
|
{
|
|
/* USER CODE BEGIN SPI1_MspInit 0 */
|
|
|
|
/* USER CODE END SPI1_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_SPI1_CLK_ENABLE();
|
|
|
|
/**SPI1 GPIO Configuration
|
|
PA4 ------> SPI1_NSS
|
|
PA5 ------> SPI1_SCK
|
|
PA6 ------> SPI1_MISO
|
|
PA7 ------> SPI1_MOSI
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF0_SPI1;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* SPI1 interrupt Init */
|
|
HAL_NVIC_SetPriority(SPI1_IRQn, 0, 0);
|
|
HAL_NVIC_EnableIRQ(SPI1_IRQn);
|
|
/* USER CODE BEGIN SPI1_MspInit 1 */
|
|
|
|
/* USER CODE END SPI1_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
|
{
|
|
|
|
if(hspi->Instance==SPI1)
|
|
{
|
|
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
|
|
|
/* USER CODE END SPI1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_SPI1_CLK_DISABLE();
|
|
|
|
/**SPI1 GPIO Configuration
|
|
PA4 ------> SPI1_NSS
|
|
PA5 ------> SPI1_SCK
|
|
PA6 ------> SPI1_MISO
|
|
PA7 ------> SPI1_MOSI
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
|
|
|
|
/* SPI1 interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(SPI1_IRQn);
|
|
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
|
|
|
/* USER CODE END SPI1_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
|
{
|
|
|
|
if(htim_base->Instance==TIM2)
|
|
{
|
|
/* USER CODE BEGIN TIM2_MspInit 0 */
|
|
|
|
/* USER CODE END TIM2_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_TIM2_CLK_ENABLE();
|
|
/* USER CODE BEGIN TIM2_MspInit 1 */
|
|
|
|
/* USER CODE END TIM2_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
|
{
|
|
|
|
if(htim_base->Instance==TIM2)
|
|
{
|
|
/* USER CODE BEGIN TIM2_MspDeInit 0 */
|
|
|
|
/* USER CODE END TIM2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_TIM2_CLK_DISABLE();
|
|
/* USER CODE BEGIN TIM2_MspDeInit 1 */
|
|
|
|
/* USER CODE END TIM2_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if(huart->Instance==USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspInit 0 */
|
|
|
|
/* USER CODE END USART1_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART1_CLK_ENABLE();
|
|
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF1_USART1;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN USART1_MspInit 1 */
|
|
|
|
/* USER CODE END USART1_MspInit 1 */
|
|
}
|
|
else if(huart->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspInit 0 */
|
|
|
|
/* USER CODE END USART3_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART3_CLK_ENABLE();
|
|
|
|
/**USART3 GPIO Configuration
|
|
PB10 ------> USART3_TX
|
|
PB11 ------> USART3_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF4_USART3;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USART3 interrupt Init */
|
|
HAL_NVIC_SetPriority(USART3_4_IRQn, 1, 0);
|
|
HAL_NVIC_EnableIRQ(USART3_4_IRQn);
|
|
/* USER CODE BEGIN USART3_MspInit 1 */
|
|
|
|
/* USER CODE END USART3_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|
{
|
|
|
|
if(huart->Instance==USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART1_CLK_DISABLE();
|
|
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
|
|
|
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART1_MspDeInit 1 */
|
|
}
|
|
else if(huart->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART3_CLK_DISABLE();
|
|
|
|
/**USART3 GPIO Configuration
|
|
PB10 ------> USART3_TX
|
|
PB11 ------> USART3_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
|
|
|
|
/* USART3 interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(USART3_4_IRQn);
|
|
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|