Made some minor revisions. Turning my attention back to this project - planning on cleaning up code (Kevin has a great start at it) for a 2.3.3 release before a full conversion built upon a framework, most likely CakePHP.

conf/authz

@@ -1,32 +0,0 @@
-### This file is an example authorization file for svnserve.
-### Its format is identical to that of mod_authz_svn authorization
-### files.
-### As shown below each section defines authorizations for the path and
-### (optional) repository specified by the section name.
-### The authorizations follow. An authorization line can refer to:
-###  - a single user,
-###  - a group of users defined in a special [groups] section,
-###  - an alias defined in a special [aliases] section,
-###  - all authenticated users, using the '$authenticated' token,
-###  - only anonymous users, using the '$anonymous' token,
-###  - anyone, using the '*' wildcard.
-###
-### A match can be inverted by prefixing the rule with '~'. Rules can
-### grant read ('r') access, read-write ('rw') access, or no access
-### ('').
-
-[aliases]
-# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
-
-[groups]
-# harry_and_sally = harry,sally
-# harry_sally_and_joe = harry,sally,&joe
-
-# [/foo/bar]
-# harry = rw
-# &joe = r
-# * =
-
-# [repository:/baz/fuz]
-# @harry_and_sally = rw
-# * = r

conf/passwd

@@ -1,8 +0,0 @@
-### This file is an example password file for svnserve.
-### Its format is similar to that of svnserve.conf. As shown in the
-### example below it contains one section labelled [users].
-### The name and password for each user follow, one account per line.
-
-[users]
-# harry = harryssecret
-# sally = sallyssecret

conf/svnserve.conf

@@ -1,47 +0,0 @@
-### This file controls the configuration of the svnserve daemon, if you
-### use it to allow access to this repository.  (If you only allow
-### access through http: and/or file: URLs, then this file is
-### irrelevant.)
-
-### Visit http://subversion.tigris.org/ for more information.
-
-[general]
-### These options control access to the repository for unauthenticated
-### and authenticated users.  Valid values are "write", "read",
-### and "none".  The sample settings below are the defaults.
-# anon-access = read
-# auth-access = write
-### The password-db option controls the location of the password
-### database file.  Unless you specify a path starting with a /,
-### the file's location is relative to the directory containing
-### this configuration file.
-### If SASL is enabled (see below), this file will NOT be used.
-### Uncomment the line below to use the default password file.
-# password-db = passwd
-### The authz-db option controls the location of the authorization
-### rules for path-based access control.  Unless you specify a path
-### starting with a /, the file's location is relative to the the
-### directory containing this file.  If you don't specify an
-### authz-db, no path-based access control is done.
-### Uncomment the line below to use the default authorization file.
-# authz-db = authz
-### This option specifies the authentication realm of the repository.
-### If two repositories have the same authentication realm, they should
-### have the same password database, and vice versa.  The default realm
-### is repository's uuid.
-# realm = My First Repository
-
-[sasl]
-### This option specifies whether you want to use the Cyrus SASL
-### library for authentication. Default is false.
-### This section will be ignored if svnserve is not built with Cyrus
-### SASL support; to check, run 'svnserve --version' and look for a line
-### reading 'Cyrus SASL authentication is available.'
-# use-sasl = true
-### These options specify the desired strength of the security layer
-### that you want SASL to provide. 0 means no encryption, 1 means
-### integrity-checking only, values larger than 1 are correlated
-### to the effective key length for encryption (e.g. 128 means 128-bit
-### encryption). The values below are the defaults.
-# min-encryption = 0
-# max-encryption = 256

db/current

@@ -1 +0,0 @@
-0

db/format

@@ -1,2 +0,0 @@
-4
-layout sharded 1000

db/fs-type

@@ -1 +0,0 @@
-fsfs

db/fsfs.conf

@@ -1,37 +0,0 @@
-### This file controls the configuration of the FSFS filesystem.
-
-[memcached-servers]
-### These options name memcached servers used to cache internal FSFS
-### data.  See http://www.danga.com/memcached/ for more information on
-### memcached.  To use memcached with FSFS, run one or more memcached
-### servers, and specify each of them as an option like so:
-# first-server = 127.0.0.1:11211
-# remote-memcached = mymemcached.corp.example.com:11212
-### The option name is ignored; the value is of the form HOST:PORT.
-### memcached servers can be shared between multiple repositories;
-### however, if you do this, you *must* ensure that repositories have
-### distinct UUIDs and paths, or else cached data from one repository
-### might be used by another accidentally.  Note also that memcached has
-### no authentication for reads or writes, so you must ensure that your
-### memcached servers are only accessible by trusted users.
-
-[caches]
-### When a cache-related error occurs, normally Subversion ignores it
-### and continues, logging an error if the server is appropriately
-### configured (and ignoring it with file:// access).  To make
-### Subversion never ignore cache errors, uncomment this line.
-# fail-stop = true
-
-[rep-sharing]
-### To conserve space, the filesystem can optionally avoid storing
-### duplicate representations.  This comes at a slight cost in performace,
-### as maintaining a database of shared representations can increase
-### commit times.  The space savings are dependent upon the size of the
-### repository, the number of objects it contains and the amount of
-### duplication between them, usually a function of the branching and
-### merging process.
-###
-### The following parameter enables rep-sharing in the repository.  It can
-### be switched on and off at will, but for best space-saving results
-### should be enabled consistently over the life of the repository.
-# enable-rep-sharing = false

db/min-unpacked-rev

@@ -1 +0,0 @@
-0

db/revprops/0/0

@@ -1,5 +0,0 @@
-K 8
-svn:date
-V 27
-2011-08-10T23:18:12.041534Z
-END

db/revs/0/0

@@ -1,11 +0,0 @@
-PLAIN
-END
-ENDREP
-id: 0.0.r0/17
-type: dir
-count: 0
-text: 0 0 4 4 2d2977d1c96f487abe4a1e202dd03b4e
-cpath: /
-
-
-17 107

db/txn-current

@@ -1 +0,0 @@
-0

db/uuid

@@ -1 +0,0 @@
-cc11d166-d879-c742-bdaf-29031b5065a7

entry.php

@@ -944,7 +944,7 @@ if ($action == "verify") { ?>
     <td>
     <table width="100%" border="0" cellpadding="8" cellspacing="8" class="bdr1_thick bottleLabel">
       <tr>
-        <td colspan="4"><div align="center"><img src="images/bottleID.jpg" alt="Bottle ID Form" width="230" height="20" /></div></td>
+        <td colspan="4"><div align="center"><img src="images/bottleID.jpg" alt="Bottle ID Form" /></div></td>
       </tr>
       <tr>
         <td width="5%" nowrap="nowrap">Name</td>
@@ -989,12 +989,12 @@ if ($action == "verify") { ?>
         <td colspan="3" class="bdr1B"><?php echo $brew_club; ?></td>
       </tr>
       <tr>
-        <td colspan="4"><div align="center"><img src="images/bottleID_attach.jpg" alt="Attach To Each Bottle" width="230" height="20" /></div></td>
+        <td colspan="4"><div align="center"><img src="images/bottleID_attach.jpg" alt="Attach To Each Bottle" /></div></td>
       </tr>
     </table></td>
     <td width="50%"><table width="100%" border="0" cellpadding="8" cellspacing="8" class="bdr1_thick bottleLabel">
       <tr>
-        <td colspan="4"><div align="center"><img src="images/bottleID.jpg" alt="Bottle ID Form" width="230" height="20" /></div></td>
+        <td colspan="4"><div align="center"><img src="images/bottleID.jpg" alt="Bottle ID Form" /></div></td>
       </tr>
       <tr>
         <td width="5%" nowrap="nowrap">Name</td>
@@ -1039,14 +1039,14 @@ if ($action == "verify") { ?>
         <td colspan="3" class="bdr1B"><?php echo $brew_club; ?></td>
       </tr>
       <tr>
-        <td colspan="4"><div align="center"><img src="images/bottleID_attach.jpg" alt="Attach To Each Bottle" width="230" height="20" /></div></td>
+        <td colspan="4"><div align="center"><img src="images/bottleID_attach.jpg" alt="Attach To Each Bottle" /></div></td>
         </tr>
     </table></td>
   </tr>
   <tr>
     <td><table width="100%" border="0" cellpadding="8" cellspacing="8" class="bdr1_thick bottleLabel">
       <tr>
-        <td colspan="4"><div align="center"><img src="images/bottleID.jpg" alt="Bottle ID Form" width="230" height="20" /></div></td>
+        <td colspan="4"><div align="center"><img src="images/bottleID.jpg" alt="Bottle ID Form" /></div></td>
       </tr>
       <tr>
         <td width="5%" nowrap="nowrap">Name</td>
@@ -1091,12 +1091,12 @@ if ($action == "verify") { ?>
         <td colspan="3" class="bdr1B"><?php echo $brew_club; ?></td>
       </tr>
       <tr>
-        <td colspan="4"><div align="center"><img src="images/bottleID_attach.jpg" alt="Attach To Each Bottle" width="230" height="20" /></div></td>
+        <td colspan="4"><div align="center"><img src="images/bottleID_attach.jpg" alt="Attach To Each Bottle" /></div></td>
       </tr>
     </table></td>
     <td width="50%"><table width="100%" border="0" cellpadding="8" cellspacing="8" class="bdr1_thick bottleLabel">
       <tr>
-        <td colspan="4"><div align="center"><img src="images/bottleID.jpg" alt="Bottle ID Form" width="230" height="20" /></div></td>
+        <td colspan="4"><div align="center"><img src="images/bottleID.jpg" alt="Bottle ID Form" /></div></td>
       </tr>
       <tr>
         <td width="5%" nowrap="nowrap">Name</td>
@@ -1141,7 +1141,7 @@ if ($action == "verify") { ?>
         <td colspan="3" class="bdr1B"><?php echo $brew_club; ?></td>
       </tr>
       <tr>
-        <td colspan="4"><div align="center"><img src="images/bottleID_attach.jpg" alt="Attach To Each Bottle" width="230" height="20" /></div></td>
+        <td colspan="4"><div align="center"><img src="images/bottleID_attach.jpg" alt="Attach To Each Bottle" /></div></td>
       </tr>
     </table></td>
   </tr>

hooks/post-commit.tmpl

@@ -1,50 +0,0 @@
-#!/bin/sh
-
-# POST-COMMIT HOOK
-#
-# The post-commit hook is invoked after a commit.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-commit' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REV          (the number of the revision just committed)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the commit has already completed and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# newly-committed tree.
-#
-# On a Unix system, the normal procedure is to have 'post-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-commit.bat' or 'post-commit.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.
-# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.apache.org/repos/asf/subversion/trunk/tools/hook-scripts/ and
-# http://svn.apache.org/repos/asf/subversion/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-
-mailer.py commit "$REPOS" "$REV" /path/to/mailer.conf

hooks/post-lock.tmpl

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-# POST-LOCK HOOK
-#
-# The post-lock hook is run after a path is locked.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-lock' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the user who created the lock)
-#
-# The paths that were just locked are passed to the hook via STDIN (as
-# of Subversion 1.2, only one path is passed per invocation, but the
-# plan is to pass all locked paths at once, so the hook program
-# should be written accordingly).
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the lock has already been created and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# newly-created lock.
-#
-# On a Unix system, the normal procedure is to have 'post-lock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-lock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-lock.bat' or 'post-lock.exe',
-# but the basic idea is the same.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-USER="$2"
-
-# Send email to interested parties, let them know a lock was created:
-mailer.py lock "$REPOS" "$USER" /path/to/mailer.conf

hooks/post-revprop-change.tmpl

@@ -1,56 +0,0 @@
-#!/bin/sh
-
-# POST-REVPROP-CHANGE HOOK
-#
-# The post-revprop-change hook is invoked after a revision property
-# has been added, modified or deleted.  Subversion runs this hook by
-# invoking a program (script, executable, binary, etc.) named
-# 'post-revprop-change' (for which this file is a template), with the
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REV          (the revision that was tweaked)
-#   [3] USER         (the username of the person tweaking the property)
-#   [4] PROPNAME     (the property that was changed)
-#   [5] ACTION       (the property was 'A'dded, 'M'odified, or 'D'eleted)
-#
-#   [STDIN] PROPVAL  ** the old property value is passed via STDIN.
-#
-# Because the propchange has already completed and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# new property value.
-#
-# On a Unix system, the normal procedure is to have 'post-revprop-change'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-revprop-change' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-revprop-change.bat' or 'post-revprop-change.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.
-# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.apache.org/repos/asf/subversion/trunk/tools/hook-scripts/ and
-# http://svn.apache.org/repos/asf/subversion/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-USER="$3"
-PROPNAME="$4"
-ACTION="$5"
-
-mailer.py propchange2 "$REPOS" "$REV" "$USER" "$PROPNAME" "$ACTION" /path/to/mailer.conf

hooks/post-unlock.tmpl

@@ -1,42 +0,0 @@
-#!/bin/sh
-
-# POST-UNLOCK HOOK
-#
-# The post-unlock hook runs after a path is unlocked.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-unlock' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the user who destroyed the lock)
-#
-# The paths that were just unlocked are passed to the hook via STDIN
-# (as of Subversion 1.2, only one path is passed per invocation, but
-# the plan is to pass all unlocked paths at once, so the hook program
-# should be written accordingly).
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the lock has already been destroyed and cannot be undone,
-# the exit code of the hook program is ignored.
-#
-# On a Unix system, the normal procedure is to have 'post-unlock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-unlock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-unlock.bat' or 'post-unlock.exe',
-# but the basic idea is the same.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-USER="$2"
-
-# Send email to interested parties, let them know a lock was removed:
-mailer.py unlock "$REPOS" "$USER" /path/to/mailer.conf

hooks/pre-commit.tmpl

@@ -1,81 +0,0 @@
-#!/bin/sh
-
-# PRE-COMMIT HOOK
-#
-# The pre-commit hook is invoked before a Subversion txn is
-# committed.  Subversion runs this hook by invoking a program
-# (script, executable, binary, etc.) named 'pre-commit' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] TXN-NAME     (the name of the txn about to be committed)
-#
-#   [STDIN] LOCK-TOKENS ** the lock tokens are passed via STDIN.
-#
-#   If STDIN contains the line "LOCK-TOKENS:\n" (the "\n" denotes a
-#   single newline), the lines following it are the lock tokens for
-#   this commit.  The end of the list is marked by a line containing
-#   only a newline character.
-#
-#   Each lock token line consists of a URI-escaped path, followed
-#   by the separator character '|', followed by the lock token string,
-#   followed by a newline.
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the txn is committed; but
-# if it exits with failure (non-zero), the txn is aborted, no commit
-# takes place, and STDERR is returned to the client.   The hook
-# program can use the 'svnlook' utility to help it examine the txn.
-#
-# On a Unix system, the normal procedure is to have 'pre-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-#   ***  NOTE: THE HOOK PROGRAM MUST NOT MODIFY THE TXN, EXCEPT  ***
-#   ***  FOR REVISION PROPERTIES (like svn:log or svn:author).   ***
-#
-#   This is why we recommend using the read-only 'svnlook' utility.
-#   In the future, Subversion may enforce the rule that pre-commit
-#   hooks should not modify the versioned data in txns, or else come
-#   up with a mechanism to make it safe to do so (by informing the
-#   committing client of the changes).  However, right now neither
-#   mechanism is implemented, so hook writers just have to be careful.
-#
-# Note that 'pre-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-commit.bat' or 'pre-commit.exe',
-# but the basic idea is the same.
-#
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.
-# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.apache.org/repos/asf/subversion/trunk/tools/hook-scripts/ and
-# http://svn.apache.org/repos/asf/subversion/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-TXN="$2"
-
-# Make sure that the log message contains some text.
-SVNLOOK=/usr/local/bin/svnlook
-$SVNLOOK log -t "$TXN" "$REPOS" | \
-   grep "[a-zA-Z0-9]" > /dev/null || exit 1
-
-# Check that the author of this commit has the rights to perform
-# the commit on the files and directories being modified.
-commit-access-control.pl "$REPOS" "$TXN" commit-access-control.cfg || exit 1
-
-# All checks passed, so allow the commit.
-exit 0

hooks/pre-lock.tmpl

@@ -1,71 +0,0 @@
-#!/bin/sh
-
-# PRE-LOCK HOOK
-#
-# The pre-lock hook is invoked before an exclusive lock is
-# created.  Subversion runs this hook by invoking a program 
-# (script, executable, binary, etc.) named 'pre-lock' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] PATH         (the path in the repository about to be locked)
-#   [3] USER         (the user creating the lock)
-#   [4] COMMENT      (the comment of the lock)
-#   [5] STEAL-LOCK   (1 if the user is trying to steal the lock, else 0)
-#
-# If the hook program outputs anything on stdout, the output string will
-# be used as the lock token for this lock operation.  If you choose to use
-# this feature, you must guarantee the tokens generated are unique across
-# the repository each time.
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the lock is created; but
-# if it exits with failure (non-zero), the lock action is aborted
-# and STDERR is returned to the client.
-
-# On a Unix system, the normal procedure is to have 'pre-lock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'pre-lock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-lock.bat' or 'pre-lock.exe',
-# but the basic idea is the same.
-#
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-PATH="$2"
-USER="$3"
-
-# If a lock exists and is owned by a different person, don't allow it
-# to be stolen (e.g., with 'svn lock --force ...').
-
-# (Maybe this script could send email to the lock owner?)
-SVNLOOK=/usr/local/bin/svnlook
-GREP=/bin/grep
-SED=/bin/sed
-
-LOCK_OWNER=`$SVNLOOK lock "$REPOS" "$PATH" | \
-            $GREP '^Owner: ' | $SED 's/Owner: //'`
-
-# If we get no result from svnlook, there's no lock, allow the lock to
-# happen:
-if [ "$LOCK_OWNER" = "" ]; then
-  exit 0
-fi
-
-# If the person locking matches the lock's owner, allow the lock to
-# happen:
-if [ "$LOCK_OWNER" = "$USER" ]; then
-  exit 0
-fi
-
-# Otherwise, we've got an owner mismatch, so return failure:
-echo "Error: $PATH already locked by ${LOCK_OWNER}." 1>&2
-exit 1

hooks/pre-revprop-change.tmpl

@@ -1,66 +0,0 @@
-#!/bin/sh
-
-# PRE-REVPROP-CHANGE HOOK
-#
-# The pre-revprop-change hook is invoked before a revision property
-# is added, modified or deleted.  Subversion runs this hook by invoking
-# a program (script, executable, binary, etc.) named 'pre-revprop-change'
-# (for which this file is a template), with the following ordered
-# arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REVISION     (the revision being tweaked)
-#   [3] USER         (the username of the person tweaking the property)
-#   [4] PROPNAME     (the property being set on the revision)
-#   [5] ACTION       (the property is being 'A'dded, 'M'odified, or 'D'eleted)
-#
-#   [STDIN] PROPVAL  ** the new property value is passed via STDIN.
-#
-# If the hook program exits with success, the propchange happens; but
-# if it exits with failure (non-zero), the propchange doesn't happen.
-# The hook program can use the 'svnlook' utility to examine the 
-# existing value of the revision property.
-#
-# WARNING: unlike other hooks, this hook MUST exist for revision
-# properties to be changed.  If the hook does not exist, Subversion 
-# will behave as if the hook were present, but failed.  The reason
-# for this is that revision properties are UNVERSIONED, meaning that
-# a successful propchange is destructive;  the old value is gone
-# forever.  We recommend the hook back up the old value somewhere.
-#
-# On a Unix system, the normal procedure is to have 'pre-revprop-change'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'pre-revprop-change' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-revprop-change.bat' or 'pre-revprop-change.exe',
-# but the basic idea is the same.
-#
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.
-# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.apache.org/repos/asf/subversion/trunk/tools/hook-scripts/ and
-# http://svn.apache.org/repos/asf/subversion/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-USER="$3"
-PROPNAME="$4"
-ACTION="$5"
-
-if [ "$ACTION" = "M" -a "$PROPNAME" = "svn:log" ]; then exit 0; fi
-
-echo "Changing revision properties other than svn:log is prohibited" >&2
-exit 1

hooks/pre-unlock.tmpl

@@ -1,63 +0,0 @@
-#!/bin/sh
-
-# PRE-UNLOCK HOOK
-#
-# The pre-unlock hook is invoked before an exclusive lock is
-# destroyed.  Subversion runs this hook by invoking a program 
-# (script, executable, binary, etc.) named 'pre-unlock' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] PATH         (the path in the repository about to be unlocked)
-#   [3] USER         (the user destroying the lock)
-#   [4] TOKEN        (the lock token to be destroyed)
-#   [5] BREAK-UNLOCK (1 if the user is breaking the lock, else 0)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the lock is destroyed; but
-# if it exits with failure (non-zero), the unlock action is aborted
-# and STDERR is returned to the client.
-
-# On a Unix system, the normal procedure is to have 'pre-unlock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'pre-unlock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-unlock.bat' or 'pre-unlock.exe',
-# but the basic idea is the same.
-#
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-PATH="$2"
-USER="$3"
-
-# If a lock is owned by a different person, don't allow it be broken.
-# (Maybe this script could send email to the lock owner?)
-
-SVNLOOK=/usr/local/bin/svnlook
-GREP=/bin/grep
-SED=/bin/sed
-
-LOCK_OWNER=`$SVNLOOK lock "$REPOS" "$PATH" | \
-            $GREP '^Owner: ' | $SED 's/Owner: //'`
-
-# If we get no result from svnlook, there's no lock, return success:
-if [ "$LOCK_OWNER" = "" ]; then
-  exit 0
-fi
-
-# If the person unlocking matches the lock's owner, return success:
-if [ "$LOCK_OWNER" = "$USER" ]; then
-  exit 0
-fi
-
-# Otherwise, we've got an owner mismatch, so return failure:
-echo "Error: $PATH locked by ${LOCK_OWNER}." 1>&2
-exit 1

hooks/start-commit.tmpl

@@ -1,65 +0,0 @@
-#!/bin/sh
-
-# START-COMMIT HOOK
-#
-# The start-commit hook is invoked before a Subversion txn is created
-# in the process of doing a commit.  Subversion runs this hook
-# by invoking a program (script, executable, binary, etc.) named
-# 'start-commit' (for which this file is a template)
-# with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the authenticated user attempting to commit)
-#   [3] CAPABILITIES (a colon-separated list of capabilities reported
-#                     by the client; see note below)
-#
-# Note: The CAPABILITIES parameter is new in Subversion 1.5, and 1.5
-# clients will typically report at least the "mergeinfo" capability.
-# If there are other capabilities, then the list is colon-separated,
-# e.g.: "mergeinfo:some-other-capability" (the order is undefined).
-#
-# The list is self-reported by the client.  Therefore, you should not
-# make security assumptions based on the capabilities list, nor should
-# you assume that clients reliably report every capability they have.
-#
-# The working directory for this hook program's invocation is undefined,
-# so the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the commit continues; but
-# if it exits with failure (non-zero), the commit is stopped before
-# a Subversion txn is created, and STDERR is returned to the client.
-#
-# On a Unix system, the normal procedure is to have 'start-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'start-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'start-commit.bat' or 'start-commit.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.
-# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.apache.org/repos/asf/subversion/trunk/tools/hook-scripts/ and
-# http://svn.apache.org/repos/asf/subversion/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-USER="$2"
-
-commit-allower.pl --repository "$REPOS" --user "$USER" || exit 1
-special-auth-check.py --user "$USER" --auth-level 3 || exit 1
-
-# All checks passed, so allow the commit.
-exit 0

includes/version.inc.php

@@ -1,5 +1,5 @@
 <?php 
-if ($row_pref['mode'] == "1") $version = "2.3.2 Personal Edition"; 
+if ($row_pref['mode'] == "1") $version = "2.3.3 Personal Edition"; 
-if ($row_pref['mode'] == "2") $version = "2.3.2 Club Edition";
+if ($row_pref['mode'] == "2") $version = "2.3.3 Club Edition";
 ?>
 

locks/db-logs.lock

@@ -1,3 +0,0 @@
-This file is not used by Subversion 1.3.x or later.
-However, its existence is required for compatibility with
-Subversion 1.2.x or earlier.

locks/db.lock

@@ -1,3 +0,0 @@
-This file is not used by Subversion 1.3.x or later.
-However, its existence is required for compatibility with
-Subversion 1.2.x or earlier.

paths.php

@@ -0,0 +1,22 @@
+<?php 
+/**
+ * Module:      paths.php 
+ * Description: This module sets global file folder paths. Also houses
+ *              specific, site-wide variables.
+ * 
+ */
+
+define('ROOT',dirname( __FILE__ ).DIRECTORY_SEPARATOR);
+define('INCLUDES',ROOT.'includes'.DIRECTORY_SEPARATOR);
+define('CONFIG',ROOT.'site'.DIRECTORY_SEPARATOR);
+define('SECTIONS',ROOT.'sections'.DIRECTORY_SEPARATOR);
+define('ADMIN',ROOT.'admin'.DIRECTORY_SEPARATOR);
+define('TEMPLATES',ROOT.'templates'.DIRECTORY_SEPARATOR);
+define('DB',ROOT.'includes'.DIRECTORY_SEPARATOR.'db'.DIRECTORY_SEPARATOR);
+define('CLASSES',ROOT.'classes'.DIRECTORY_SEPARATOR);
+// define('SETUP',ROOT.'setup'.DIRECTORY_SEPARATOR);
+define('IMAGES',ROOT.'images'.DIRECTORY_SEPARATOR);
+define('LABEL_IMAGES',ROOT.'label_images'.DIRECTORY_SEPARATOR);
+require(CONFIG.'config.php');
+
+?>

sections/brewblogList.inc.php

@@ -92,7 +92,7 @@
               <?php if (!checkmobile()) { ?>
               <td class="dataList">
 			  		<?php if ($row_log['brewLovibond'] != "") { ?>
-					<?php include (INCLUDES.'color.inc.php'); ?>
+					<?php //include (INCLUDES.'color.inc.php'); ?>
 					<?php include (INCLUDES.'color_display.inc.php'); ?>
 				   	<?php } else echo "&nbsp;"; ?>
 			  </td>

sections/featured.inc.php

@@ -60,8 +60,8 @@
   	<?php if (!checkmobile()) { ?>
     <td class="dataList">
 		<?php if ($row_featured['brewLovibond'] != "") { ?>
-		<?php include (INCLUDES.'color.inc.php'); ?>
+		<?php include (INCLUDES.'color_display.inc.php'); ?>
-		<?php include (INCLUDES.'color_display_featured.inc.php'); ?>
+		<?php //include (INCLUDES.'color_display_featured.inc.php'); ?>
 		<?php } else echo "&nbsp;"; ?>
    	</td>
 	<?php } ?>

sections/recipeList.inc.php

@@ -84,7 +84,7 @@
               <?php if (!checkmobile()) { ?>
               <td class="dataList">
 			  		<?php if ($row_recipeList['brewLovibond'] != "") { ?>
-					<?php include (INCLUDES.'color.inc.php'); ?>
+					<?php //include (INCLUDES.'color.inc.php'); ?>
 					<?php include (INCLUDES.'color_display.inc.php'); ?>
 				   	<?php } else echo "&nbsp;"; ?>
 			  </td>

site/config.php

@@ -38,25 +38,4 @@ Do not change the following line.
 */
 $brewing = $brewblog; 
 
-/******End MySQL Connections*******
-
-/*
-
-Set up your images directory path.  This is used for label image uploading.
-Change this line to your installation's home directory on the server.
-Generally something like /home/your_user_name/public_html/folder_name (do NOT put a forward slash [/] at the end).
-
-******************************************************************************
-
-CORRECT example if installation is in the web root folder:
-$images_dir = "/home/public_html";
-
-CORRECT example installation is in a sub-folder on your site:
-$images_dir = "/home/public_html/brewblogger";
-
-******************************************************************************
-
-*/
-$images_dir = "";
-
 ?>