The index_irq could trigger one sector too late, in the case where
index_irq was reset just before the sector pulse was received.
Check the duration of the time between pulses before propagating the
hardsec_index_irq_primed to index_irq.
While this change is required for reading and writing North Star
floppies (due to lack of positioning information in the sector header)
it is also helpful for reading Micropolis disks, as currently,
occasionally the first sector will be missed, and will be found on the
next rotation of the disk. This change is required for reliably writing
Micropolis disks though, when that functionality becomes available.
North Star Floppy disks use 10-sector hard sectored disks with either FM
or MFM encoding. They may be single- or double-sided. Each of the 10
sectors contains 256 (FM) or 512 (MFM) bytes of data. The disk has 35
cylinders, with tracks 0-34 on side 0, and tracks 35-69 on side 1.
Tracks on side 1 are numbered "backwards" in that track 35 corresponds
to cylinder 34, side 1, and track 69 corresponds to cylinder 0, side 1.
The North Star sector format does not include any head positioning
information. As such, reads from North Star floppies need to be
synchronized with the index pulse, in order to properly identify the
sector being read. While there is a command line option:
--sync-with-index, that does this, the North Star reader forces this
behavior by default.
MFM sectors have 32 bytes of 00's followed by two sync characters,
specified in the North Star MDS manual as 0xFBFB.
This is true for most disks; however, I found a few disks, including an
original North Star DOS/BASIC v2.2.1 DQ disk, that uses 0xFBnn, where
nn is an incrementing pattern.
While searching for the start of a sector header, seekToPattern()
ignores the sector pulses. If a sector header cannot be decoded for any
reason, seekToPattern() will advance past one or more sector pulses.
For this reason, the _hardSectorId is calulated after the sector header
is found.
Due to the nature of the track ordering on side 1, an .nsi image reader
and writer are provided for double-sided disks. The .nsi image format
supports both single- and double-sided disks; however, single-sided .nsi
images are equivalent to .img images.
