Bill Cox
56116d2cf6
Changed bottom solder mask and text
2017-07-23 17:54:54 -07:00
Bill Cox
0eef725e8f
Added a gold-finger version suitable for production at Advanced Circuits
2015-06-25 08:51:39 -07:00
Bill Cox
21f3d2c3ee
minor board tweak
2015-03-07 06:07:10 -08:00
Bill Cox
5fb8ee0725
Changed gain target to 1.84
2015-03-07 06:01:05 -08:00
Bill Cox
216962622f
updated BOM
2015-02-28 14:18:30 -08:00
Bill Cox
b63b836250
Added a hopefully improved edge connector hack where I can solder real USB pins to the board
2014-12-26 07:07:55 -05:00
Bill Cox
1006254e2b
Restructuring a bit
2014-12-10 13:03:19 -05:00
Bill Cox
583dc5c600
Made 0.5mm pads all the same size and shrank QFN24 center pad
2014-11-26 07:38:07 -05:00
Bill Cox
dc3a4a2996
Changed architecture to modular entropy multiplier
2014-11-24 21:08:49 -05:00
Bill Cox
2a30320c7b
update
2014-11-23 11:52:53 -05:00
Bill Cox
e4a2261f62
Tweaked edge connector hack board
2014-11-23 11:30:54 -05:00
Bill Cox
dbe884b860
Cleaned up edge connector board a bit
2014-11-23 08:48:35 -05:00
Bill Cox
9edacd2c2d
Updated BOM for USPS business mailing pricing
2014-11-22 17:30:26 -05:00
Bill Cox
1612e76747
Updated README to use modular noise multiplier
2014-11-22 17:06:34 -05:00
Bill Cox
7629f0d5ac
Working on edge-connector hack version
2014-11-17 11:59:27 -05:00
Bill Cox
a300194f4f
Added generated files for SmallBatchAssembly
2014-11-17 11:28:07 -05:00
Bill Cox
cea61cfa41
Added pannel with fudicials, courtesy of OSH Park
2014-11-14 18:52:43 -05:00
Bill Cox
1ccf43bf52
Added 3 fiducial marks on the board
2014-11-14 15:34:14 -05:00
Bill Cox
0235180fc2
renamed BOM-81 to BOM-80
2014-11-14 13:05:07 -05:00
Bill Cox
ec2c28ac2f
Added BOM-81.ods
2014-11-13 21:23:26 -05:00
Bill
134e974045
Merge pull request #1 from EagleWorks/master
...
Board clean-up
2014-11-13 10:17:10 -05:00
Bill Cox
f96d333618
Added Microsoft compatible version of BOM spreadsheet
2014-11-12 14:44:27 -05:00
EagleWorks
2715446c01
Board layout changed
...
I moved the components on the board around to give a better visual
representation of the components of the infnoise; USB protection,
filter, divider network, and then where the actual magic happens. Vias
galore, but ERC and DRC satisfied.
2014-11-08 07:18:38 +01:00
EagleWorks
4c9b8869e6
Board clean-up, parts updated from modified library
...
Schematic:
- Only updated parts from the modified library
Board:
- Moved parts, vias, onto mm grid (was arbitrary?)
- Major re-tracing to keep traces on-grid
- Added full board ground planes (both sides) with grounding vias
scattered around - edges are now fully grounded.
- Moved some parts around beyond grid, e.g. C6 closer to VCCio
- Added 'INFNOISE TRNG' to tNames
Notes:
- Passes ERC and DRC (based on originally included OSHpark Design
Rules), with the exception of the slot pads for the USB connector
(originally approved).
2014-11-07 05:23:05 +01:00
EagleWorks
5147c72761
Library tweaks (non-structural)
...
I've adjusted the library as follows:
Changed text alignment (centered, mostly) on parts, made positioning
more consistent.
Reduced tKeepout as it was a rather on the generous side for the 0402
and 0403 parts.
Added / fixed a few Device descriptions.
2014-11-07 05:15:09 +01:00
Bill Cox
14ab8ffab9
Updated BOM
2014-11-03 07:43:17 -05:00
Bill Cox
da1b1a543a
Switched to a USB connector designed for 1.6mm thick boards
2014-11-02 15:01:39 -05:00
Bill Cox
6b6291bb2d
Modified board to remove resistor in feedback, as well as pull-down
2014-11-02 14:31:34 -05:00
Bill Cox
bdb8571002
Changed 100pF caps to 220pF
2014-10-23 15:57:24 -04:00
Bill Cox
956a1d0c84
Working on docs
2014-10-21 09:57:55 -04:00
Bill Cox
914fd9c27b
minor board update
2014-10-20 20:10:19 -04:00
Bill Cox
5854093002
Updates to board based on fixes to breadboard
2014-10-20 11:09:13 -04:00
Bill Cox
9a82cecd34
tweaks
2014-10-17 05:03:47 -04:00
Bill Cox
ac55fa1869
Updated driver to use correct pins
2014-10-16 12:03:49 -04:00
Bill Cox
b970b984b5
move a wire
2014-10-15 19:30:51 -04:00
Bill Cox
20e5a4c93a
Converted to 0603 parts to be compatible with Small Batch Assembly
2014-10-15 16:08:45 -04:00
Bill Cox
514345ba08
Modified board to fit USB stick enclosure
2014-10-13 13:28:00 -04:00
Bill Cox
c86b296403
Updated to not extend outside board boundary
2014-10-12 14:35:34 -04:00
Bill Cox
0669904afb
update
2014-10-12 07:33:47 -04:00
Bill Cox
8647d14719
Changed to real USB connector
2014-10-12 07:25:47 -04:00
Bill Cox
445480faba
Updated part list
2014-10-11 16:11:11 -04:00
Bill Cox
278041f73e
Increased widths and spacing based on advice on web
2014-10-10 16:07:55 -04:00
Bill Cox
c65a21aa48
minor cleanup
2014-10-10 15:05:32 -04:00
Bill Cox
0881c014ff
Added bitmap of board to README
2014-10-10 14:23:31 -04:00
Bill Cox
106a262647
Added eagle files
2014-10-10 13:27:34 -04:00
