45 lines
2.4 KiB
Verilog
45 lines
2.4 KiB
Verilog
// Default femtosoc configuration file for IceStick
|
|
|
|
/************************* Devices **********************************************************************************/
|
|
|
|
`define NRV_IO_LEDS // Mapped IO, LEDs D1,D2,D3,D4 (D5 is used to display errors)
|
|
`define NRV_IO_IRDA // In IO_LEDS, support for the IRDA on the IceStick (WIP)
|
|
`define NRV_IO_UART // Mapped IO, virtual UART (USB)
|
|
//`define NRV_IO_SSD1351 // Mapped IO, 128x128x64K OLED screen
|
|
`define NRV_IO_MAX7219 // Mapped IO, 8x8 led matrix
|
|
`define NRV_MAPPED_SPI_FLASH // SPI flash mapped in address space. Can be used to run code from SPI flash.
|
|
|
|
/************************* Processor configuration *******************************************************************/
|
|
|
|
/*
|
|
`define NRV_FEMTORV32_TACHYON // "Tachyon" (carefully latched for max highfreq). Needs more space (remove MAX7219).
|
|
`define NRV_FREQ 60 // Validated at 60 MHz on the IceStick. Can overclock to 80-95 MHz.
|
|
`define NRV_RESET_ADDR 32'h00820000 // Jump execution to SPI Flash (800000h, +128k(20000h) for FPGA bitstream)
|
|
`define NRV_COUNTER_WIDTH 24 // Number of bits in cycles counter
|
|
`define NRV_TWOLEVEL_SHIFTER // Faster shifts
|
|
*/
|
|
// tinyraytracer: 90 MHz, 14:02
|
|
// 95 MHz, 13:18
|
|
|
|
`define NRV_FEMTORV32_QUARK
|
|
`define NRV_FREQ 50 // Validated at 50 MHz on the IceStick. Can overclock to 70 MHz.
|
|
`define NRV_RESET_ADDR 32'h00820000 // Jump execution to SPI Flash (800000h, +128k(20000h) for FPGA bitstream)
|
|
`define NRV_COUNTER_WIDTH 24 // Number of bits in cycles counter
|
|
`define NRV_TWOLEVEL_SHIFTER // Faster shifts
|
|
// tinyraytracer: 70 MHz, 17:30
|
|
|
|
|
|
/************************* RAM (in bytes, needs to be a multiple of 4)***********************************************/
|
|
|
|
`define NRV_RAM 6144 // default for ICESTICK (cannot do more !)
|
|
|
|
/************************* Advanced devices configuration ***********************************************************/
|
|
|
|
`define NRV_RUN_FROM_SPI_FLASH // Do not 'readmemh()' firmware from '.hex' file
|
|
`define NRV_IO_HARDWARE_CONFIG // Comment-out to disable hardware config registers mapped in IO-Space
|
|
// (note: firmware libfemtorv32 depends on it)
|
|
|
|
/********************************************************************************************************************/
|
|
|
|
`define NRV_CONFIGURED
|