salfter/micropendous
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Updated to LUFA-111009.

Browse Source
This commit is contained in:
opendous
2011-10-26 23:36:49 +00:00
parent 4de1c73e95
commit bdd3684293
1934 changed files with 181576 additions and 88420 deletions
Download Patch File Download Diff File Expand all files Collapse all files

54
Micropendous/libs/LUFA/Bootloaders/CDC/BootloaderCDC.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -39,22 +39,22 @@
/** Contains the current baud rate and other settings of the first virtual serial port. This must be retained as some
* operating systems will not open the port unless the settings can be set successfully.
*/
CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,
.CharFormat = OneStopBit,
.ParityType = Parity_None,
.DataBits = 8 };
static CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 0,
.CharFormat = CDC_LINEENCODING_OneStopBit,
.ParityType = CDC_PARITY_None,
.DataBits = 8 };
/** Current address counter. This stores the current address of the FLASH or EEPROM as set by the host,
* and is used when reading or writing to the AVRs memory (either FLASH or EEPROM depending on the issued
* command.)
*/
uint32_t CurrAddress;
static uint32_t CurrAddress;
/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run
* via a watchdog reset. When cleared the bootloader will exit, starting the watchdog and entering an infinite
* loop until the AVR restarts and the application runs.
*/
bool RunBootloader = true;
static bool RunBootloader = true;
/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously
@@ -66,6 +66,9 @@ int main(void)
/* Setup hardware required for the bootloader */
SetupHardware();
/* Turn on first LED on the board to indicate that the bootloader has started */
LEDs_SetAllLEDs(LEDS_LED1);
/* Enable global interrupts so that the USB stack can function */
sei();
@@ -100,6 +103,17 @@ void SetupHardware(void)
/* Initialize USB Subsystem */
USB_Init();
LEDs_Init();
/* Bootloader active LED toggle timer initialization */
TIMSK1 = (1 << TOIE1);
TCCR1B = ((1 << CS11) | (1 << CS10));
}
/** ISR to periodically toggle the LEDs on the board to indicate that the bootloader is active. */
ISR(TIMER1_OVF_vect, ISR_BLOCK)
{
LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);
}
/** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready
@@ -127,27 +141,37 @@ void EVENT_USB_Device_ConfigurationChanged(void)
*/
void EVENT_USB_Device_ControlRequest(void)
{
/* Ignore any requests that aren't directed to the CDC interface */
if ((USB_ControlRequest.bmRequestType & (CONTROL_REQTYPE_TYPE | CONTROL_REQTYPE_RECIPIENT)) !=
(REQTYPE_CLASS | REQREC_INTERFACE))
{
return;
}
/* Activity - toggle indicator LEDs */
LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);
/* Process CDC specific control requests */
switch (USB_ControlRequest.bRequest)
{
case REQ_GetLineEncoding:
case CDC_REQ_GetLineEncoding:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
/* Write the line coding data to the control endpoint */
Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
Endpoint_ClearOUT();
}
break;
case REQ_SetLineEncoding:
case CDC_REQ_SetLineEncoding:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
/* Read the line coding data in from the host into the global struct */
Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
Endpoint_ClearIN();
}
@@ -294,7 +318,7 @@ static uint8_t FetchNextCommandByte(void)
}
/* Fetch the next byte from the OUT endpoint */
return Endpoint_Read_Byte();
return Endpoint_Read_8();
}
/** Writes the next response byte to the CDC data IN endpoint, and sends the endpoint back if needed to free up the
@@ -319,8 +343,8 @@ static void WriteNextResponseByte(const uint8_t Response)
}
}
/* Write the next byte to the OUT endpoint */
Endpoint_Write_Byte(Response);
/* Write the next byte to the IN endpoint */
Endpoint_Write_8(Response);
}
/** Task to read in AVR910 commands from the CDC data OUT endpoint, process them, perform the required actions

45
Micropendous/libs/LUFA/Bootloaders/CDC/BootloaderCDC.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -48,6 +48,7 @@
#include "Descriptors.h"
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
/* Macros: */
/** Version major of the CDC bootloader. */
@@ -65,50 +66,10 @@
/** Eight character bootloader firmware identifier reported to the host when requested */
#define SOFTWARE_IDENTIFIER "LUFACDC"
/** CDC Class specific request to get the current virtual serial port configuration settings. */
#define REQ_GetLineEncoding 0x21
/** CDC Class specific request to set the current virtual serial port configuration settings. */
#define REQ_SetLineEncoding 0x20
/* Type Defines: */
/** Type define for the virtual serial port line encoding settings, for storing the current USART configuration
* as set by the host via a class specific request.
*/
typedef struct
{
uint32_t BaudRateBPS; /**< Baud rate of the virtual serial port, in bits per second */
uint8_t CharFormat; /**< Character format of the virtual serial port, a value from the
* CDCDevice_CDC_LineCodingFormats_t enum
*/
uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
* CDCDevice_LineCodingParity_t enum
*/
uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
} CDC_Line_Coding_t;
/** Type define for a non-returning pointer to the start of the loaded application in flash memory. */
typedef void (*AppPtr_t)(void) ATTR_NO_RETURN;
/* Enums: */
/** Enum for the possible line encoding formats of a virtual serial port. */
enum CDCDevice_CDC_LineCodingFormats_t
{
OneStopBit = 0, /**< Each frame contains one stop bit */
OneAndAHalfStopBits = 1, /**< Each frame contains one and a half stop bits */
TwoStopBits = 2, /**< Each frame contains two stop bits */
};
/** Enum for the possible line encoding parity settings of a virtual serial port. */
enum CDCDevice_LineCodingParity_t
{
Parity_None = 0, /**< No parity bit mode on each frame */
Parity_Odd = 1, /**< Odd parity bit mode on each frame */
Parity_Even = 2, /**< Even parity bit mode on each frame */
Parity_Mark = 3, /**< Mark parity bit mode on each frame */
Parity_Space = 4, /**< Space parity bit mode on each frame */
};
/* Function Prototypes: */
void CDC_Task(void);
void SetupHardware(void);

46
Micropendous/libs/LUFA/Bootloaders/CDC/BootloaderCDC.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage CDC Class USB AVR Bootloader
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -15,7 +15,7 @@
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -42,7 +42,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
* protocol compatible programming software to load firmware onto the AVR.
@@ -51,14 +51,42 @@
* you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
* values in the accompanying makefile.
*
* This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
* When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the
* bootloader from the normal user application.
*
* \section Sec_Installation Driver Installation
*
* After running this bootloader for the first time on a new computer, you will need to supply the .INF
* file located in this bootloader project's directory as the device's driver when running under Windows.
* This will enable Windows to use its inbuilt CDC drivers, negating the need for custom drivers for the
* device. Other Operating Systems should automatically use their own inbuilt CDC-ACM drivers.
*
* \section SSec_Options Project Options
* \section Sec_HostApp Host Controller Application
*
* This bootloader is compatible with the open source application AVRDUDE, Atmel's AVRPROG, or other
* applications implementing the AVR109 protocol, which is documented on the Atmel website as an application
* note.
*
* \subsection SSec_AVRDude AVRDUDE (Windows, Mac, Linux)
*
* AVRDude is a free, cross-platform and open source command line programmer for Atmel and third party AVR
* programmers. It is available on the the Windows platform as part of the "WinAVR" package, or on other systems
* either from a build from the official source code, or in many distributions as a precompiled binary package.
*
* To load a new HEX file with AVRDude, specify "AVR109" as the programmer, with the allocated COM port. On Windows
* platforms this will be a COMx port name:
* \code
* avrdude -c AVR109 -p at90usb1287 -P COM0 -U flash:w:Mouse.hex
* \endcode
*
* On Linux systems, this will typically be a /dev/ttyACMx port name:
* \code
* avrdude -c AVR109 -p at90usb1287 -P /dev/ttyACM0 -U flash:w:Mouse.hex
* \endcode
*
* Refer to the AVRDude project documentation for additional usage instructions.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
@@ -67,24 +95,24 @@
* <td>NO_BLOCK_SUPPORT</td>
* <td>Makefile LUFA_OPTS</td>
* <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made
* using the byte-level commands.
* using the byte-level commands.</td>
* </tr>
* <tr>
* <td>NO_EEPROM_BYTE_SUPPORT</td>
* <td>Makefile LUFA_OPTS</td>
* <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes
* to be made using the block-level commands.
* to be made using the block-level commands.</td>
* </tr>
* <tr>
* <td>NO_FLASH_BYTE_SUPPORT</td>
* <td>Makefile LUFA_OPTS</td>
* <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes
* to be made using the block-level commands.
* to be made using the block-level commands.</td>
* </tr>
* <tr>
* <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
* <td>Makefile LUFA_OPTS</td>
* <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set progmatically.
* <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.</td>
* </tr>
* </table>
*/

24
Micropendous/libs/LUFA/Bootloaders/CDC/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -42,7 +42,7 @@
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t DeviceDescriptor =
const USB_Descriptor_Device_t DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -69,7 +69,7 @@ USB_Descriptor_Device_t DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t ConfigurationDescriptor =
const USB_Descriptor_Configuration_t ConfigurationDescriptor =
{
.Config =
{
@@ -104,7 +104,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
.CDC_Functional_Header =
{
.Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalHeader_t), .Type = DTYPE_CSInterface},
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
.Subtype = 0x00,
.CDCSpecification = VERSION_BCD(01.10),
@@ -112,7 +112,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
.CDC_Functional_ACM =
{
.Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalACM_t), .Type = DTYPE_CSInterface},
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
.Subtype = 0x02,
.Capabilities = 0x04,
@@ -120,7 +120,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
.CDC_Functional_Union =
{
.Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalUnion_t), .Type = DTYPE_CSInterface},
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
.Subtype = 0x06,
.MasterInterfaceNumber = 0,
@@ -131,7 +131,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
@@ -157,7 +157,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x01
@@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x01
@@ -178,7 +178,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t LanguageString =
const USB_Descriptor_String_t LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -189,7 +189,7 @@ USB_Descriptor_String_t LanguageString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t ProductString =
const USB_Descriptor_String_t ProductString =
{
.Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},

54
Micropendous/libs/LUFA/Bootloaders/CDC/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -83,11 +83,11 @@
#elif defined(__AVR_ATmega8U2__)
#define AVR_SIGNATURE_1 0x1E
#define AVR_SIGNATURE_2 0x93
#define AVR_SIGNATURE_3 0x82
#define AVR_SIGNATURE_3 0x89
#elif defined(__AVR_AT90USB82__)
#define AVR_SIGNATURE_1 0x1E
#define AVR_SIGNATURE_2 0x93
#define AVR_SIGNATURE_3 0x89
#define AVR_SIGNATURE_2 0x94
#define AVR_SIGNATURE_3 0x82
#else
#error The selected AVR part is not currently supported by this bootloader.
#endif
@@ -108,40 +108,6 @@
#define CDC_NOTIFICATION_EPSIZE 8
/* Type Defines: */
/** Type define for a CDC class-specific functional header descriptor. This indicates to the host that the device
* contains one or more CDC functional data descriptors, which give the CDC interface's capabilities and configuration.
* See the CDC class specification for more details.
*/
typedef struct
{
USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors. */
uint16_t CDCSpecification; /**< Version number of the CDC specification implemented by the device,
* encoded in BCD format.
*/
} USB_Descriptor_CDC_FunctionalHeader_t;
/** Type define for a CDC class-specific functional ACM descriptor. This indicates to the host that the CDC interface
* supports the CDC ACM subclass of the CDC specification. See the CDC class specification for more details.
*/
typedef struct
{
USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors. */
uint8_t Capabilities; /**< Capabilities of the ACM interface, given as a bit mask. */
} USB_Descriptor_CDC_FunctionalACM_t;
/** Type define for a CDC class-specific functional Union descriptor. This indicates to the host that specific
* CDC control and data interfaces are related. See the CDC class specification for more details.
*/
typedef struct
{
USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors. */
uint8_t MasterInterfaceNumber; /**< Interface number of the CDC Control interface. */
uint8_t SlaveInterfaceNumber; /**< Interface number of the CDC Data interface. */
} USB_Descriptor_CDC_FunctionalUnion_t;
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
@@ -149,11 +115,15 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// CDC Control Interface
USB_Descriptor_Interface_t CDC_CCI_Interface;
USB_Descriptor_CDC_FunctionalHeader_t CDC_Functional_Header;
USB_Descriptor_CDC_FunctionalACM_t CDC_Functional_ACM;
USB_Descriptor_CDC_FunctionalUnion_t CDC_Functional_Union;
USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header;
USB_CDC_Descriptor_FunctionalACM_t CDC_Functional_ACM;
USB_CDC_Descriptor_FunctionalUnion_t CDC_Functional_Union;
USB_Descriptor_Endpoint_t CDC_NotificationEndpoint;
// CDC Data Interface
USB_Descriptor_Interface_t CDC_DCI_Interface;
USB_Descriptor_Endpoint_t CDC_DataOutEndpoint;
USB_Descriptor_Endpoint_t CDC_DataInEndpoint;

42
Micropendous/libs/LUFA/Bootloaders/CDC/makefile
View File

@@ -51,6 +51,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -63,8 +67,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -72,7 +76,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -82,15 +86,17 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Starting byte address of the bootloader, as a byte address - computed via the formula
# BOOT_START = ((TOTAL_FLASH_BYTES - BOOTLOADER_SECTION_SIZE_BYTES) * 1024)
# BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024)
#
# Note that the bootloader size and start address given in AVRStudio is in words and not
# bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
BOOT_START = 0x1E000
FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 4
BOOT_START = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
# Output format. (can be srec, ihex, binary)
@@ -114,6 +120,7 @@ LUFA_PATH = ../..
# LUFA library compile-time options and predefined tokens
LUFA_OPTS = -D USB_DEVICE_ONLY
LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
LUFA_OPTS += -D ORDERED_EP_CONFIG
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
LUFA_OPTS += -D USE_RAM_DESCRIPTORS
@@ -121,7 +128,6 @@ LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENAB
LUFA_OPTS += -D NO_INTERNAL_SERIAL
LUFA_OPTS += -D NO_DEVICE_SELF_POWER
LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D NO_SOF_EVENTS
#LUFA_OPTS += -D NO_BLOCK_SUPPORT
@@ -184,22 +190,23 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
CPPDEFS += $(LUFA_OPTS)
@@ -679,13 +686,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -697,5 +713,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program debug gdb-config
clean_list clean_doxygen program debug gdb-config checksource

117
Micropendous/libs/LUFA/Bootloaders/DFU/BootloaderDFU.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -38,59 +38,59 @@
/** Flag to indicate if the bootloader is currently running in secure mode, disallowing memory operations
* other than erase. This is initially set to the value set by SECURE_MODE, and cleared by the bootloader
* once a memory erase has completed.
* once a memory erase has completed in a bootloader session.
*/
bool IsSecure = SECURE_MODE;
static bool IsSecure = SECURE_MODE;
/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run
* via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application
* jumped to via an indirect jump to location 0x0000 (or other location specified by the host).
*/
bool RunBootloader = true;
static bool RunBootloader = true;
/** Flag to indicate if the bootloader is waiting to exit. When the host requests the bootloader to exit and
* jump to the application address it specifies, it sends two sequential commands which must be properly
* acknowledged. Upon reception of the first the RunBootloader flag is cleared and the WaitForExit flag is set,
* causing the bootloader to wait for the final exit command before shutting down.
*/
bool WaitForExit = false;
static bool WaitForExit = false;
/** Current DFU state machine state, one of the values in the DFU_State_t enum. */
uint8_t DFU_State = dfuIDLE;
static uint8_t DFU_State = dfuIDLE;
/** Status code of the last executed DFU command. This is set to one of the values in the DFU_Status_t enum after
* each operation, and returned to the host when a Get Status DFU request is issued.
*/
uint8_t DFU_Status = OK;
static uint8_t DFU_Status = OK;
/** Data containing the DFU command sent from the host. */
DFU_Command_t SentCommand;
static DFU_Command_t SentCommand;
/** Response to the last issued Read Data DFU command. Unlike other DFU commands, the read command
* requires a single byte response from the bootloader containing the read data when the next DFU_UPLOAD command
* is issued by the host.
*/
uint8_t ResponseByte;
static uint8_t ResponseByte;
/** Pointer to the start of the user application. By default this is 0x0000 (the reset vector), however the host
* may specify an alternate address when issuing the application soft-start command.
*/
AppPtr_t AppStartPtr = (AppPtr_t)0x0000;
static AppPtr_t AppStartPtr = (AppPtr_t)0x0000;
/** 64-bit flash page number. This is concatenated with the current 16-bit address on USB AVRs containing more than
* 64KB of flash memory.
*/
uint8_t Flash64KBPage = 0;
static uint8_t Flash64KBPage = 0;
/** Memory start address, indicating the current address in the memory being addressed (either FLASH or EEPROM
* depending on the issued command from the host).
*/
uint16_t StartAddr = 0x0000;
static uint16_t StartAddr = 0x0000;
/** Memory end address, indicating the end address to read to/write from in the memory being addressed (either FLASH
/** Memory end address, indicating the end address to read from/write to in the memory being addressed (either FLASH
* of EEPROM depending on the issued command from the host).
*/
uint16_t EndAddr = 0x0000;
static uint16_t EndAddr = 0x0000;
/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously
@@ -102,6 +102,26 @@ int main(void)
/* Configure hardware required by the bootloader */
SetupHardware();
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
/* Disable JTAG debugging */
MCUCR |= (1 << JTD);
MCUCR |= (1 << JTD);
/* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */
PORTF |= (1 << 4);
Delay_MS(10);
/* If the TCK pin is not jumpered to ground, start the user application instead */
RunBootloader = (!(PINF & (1 << 4)));
/* Re-enable JTAG debugging */
MCUCR &= ~(1 << JTD);
MCUCR &= ~(1 << JTD);
#endif
/* Turn on first LED on the board to indicate that the bootloader has started */
LEDs_SetAllLEDs(LEDS_LED1);
/* Enable global interrupts so that the USB stack can function */
sei();
@@ -132,31 +152,52 @@ void SetupHardware(void)
/* Initialize the USB subsystem */
USB_Init();
LEDs_Init();
/* Bootloader active LED toggle timer initialization */
TIMSK1 = (1 << TOIE1);
TCCR1B = ((1 << CS11) | (1 << CS10));
}
/** Resets all configured hardware required for the bootloader back to their original states. */
void ResetHardware(void)
{
/* Shut down the USB subsystem */
USB_ShutDown();
USB_Disable();
/* Relocate the interrupt vector table back to the application section */
MCUCR = (1 << IVCE);
MCUCR = 0;
}
/** ISR to periodically toggle the LEDs on the board to indicate that the bootloader is active. */
ISR(TIMER1_OVF_vect, ISR_BLOCK)
{
LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);
}
/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
* the device from the USB host before passing along unhandled control requests to the library for processing
* internally.
*/
void EVENT_USB_Device_ControlRequest(void)
{
/* Ignore any requests that aren't directed to the DFU interface */
if ((USB_ControlRequest.bmRequestType & (CONTROL_REQTYPE_TYPE | CONTROL_REQTYPE_RECIPIENT)) !=
(REQTYPE_CLASS | REQREC_INTERFACE))
{
return;
}
/* Activity - toggle indicator LEDs */
LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);
/* Get the size of the command and data from the wLength value */
SentCommand.DataSize = USB_ControlRequest.wLength;
switch (USB_ControlRequest.bRequest)
{
case REQ_DFU_DNLOAD:
case DFU_REQ_DNLOAD:
Endpoint_ClearSETUP();
/* Check if bootloader is waiting to terminate */
@@ -179,7 +220,7 @@ void EVENT_USB_Device_ControlRequest(void)
}
/* First byte of the data stage is the DNLOAD request's command */
SentCommand.Command = Endpoint_Read_Byte();
SentCommand.Command = Endpoint_Read_8();
/* One byte of the data stage is the command, so subtract it from the total data bytes */
SentCommand.DataSize--;
@@ -188,7 +229,7 @@ void EVENT_USB_Device_ControlRequest(void)
for (uint8_t DataByte = 0; (DataByte < sizeof(SentCommand.Data)) &&
Endpoint_BytesInEndpoint(); DataByte++)
{
SentCommand.Data[DataByte] = Endpoint_Read_Byte();
SentCommand.Data[DataByte] = Endpoint_Read_8();
SentCommand.DataSize--;
}
@@ -243,7 +284,7 @@ void EVENT_USB_Device_ControlRequest(void)
}
/* Write the next word into the current flash page */
boot_page_fill(CurrFlashAddress.Long, Endpoint_Read_Word_LE());
boot_page_fill(CurrFlashAddress.Long, Endpoint_Read_16_LE());
/* Adjust counters */
WordsInFlashPage += 1;
@@ -292,7 +333,7 @@ void EVENT_USB_Device_ControlRequest(void)
}
/* Read the byte from the USB interface and write to to the EEPROM */
eeprom_write_byte((uint8_t*)StartAddr, Endpoint_Read_Byte());
eeprom_write_byte((uint8_t*)StartAddr, Endpoint_Read_8());
/* Adjust counters */
StartAddr++;
@@ -309,7 +350,7 @@ void EVENT_USB_Device_ControlRequest(void)
Endpoint_ClearStatusStage();
break;
case REQ_DFU_UPLOAD:
case DFU_REQ_UPLOAD:
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()))
@@ -324,12 +365,12 @@ void EVENT_USB_Device_ControlRequest(void)
{
/* Blank checking is performed in the DFU_DNLOAD request - if we get here we've told the host
that the memory isn't blank, and the host is requesting the first non-blank address */
Endpoint_Write_Word_LE(StartAddr);
Endpoint_Write_16_LE(StartAddr);
}
else
{
/* Idle state upload - send response to last issued command */
Endpoint_Write_Byte(ResponseByte);
Endpoint_Write_8(ResponseByte);
}
}
else
@@ -364,9 +405,9 @@ void EVENT_USB_Device_ControlRequest(void)
/* Read the flash word and send it via USB to the host */
#if (FLASHEND > 0xFFFF)
Endpoint_Write_Word_LE(pgm_read_word_far(CurrFlashAddress.Long));
Endpoint_Write_16_LE(pgm_read_word_far(CurrFlashAddress.Long));
#else
Endpoint_Write_Word_LE(pgm_read_word(CurrFlashAddress.Long));
Endpoint_Write_16_LE(pgm_read_word(CurrFlashAddress.Long));
#endif
/* Adjust counters */
@@ -393,7 +434,7 @@ void EVENT_USB_Device_ControlRequest(void)
}
/* Read the EEPROM byte and send it via USB to the host */
Endpoint_Write_Byte(eeprom_read_byte((uint8_t*)StartAddr));
Endpoint_Write_8(eeprom_read_byte((uint8_t*)StartAddr));
/* Adjust counters */
StartAddr++;
@@ -408,27 +449,27 @@ void EVENT_USB_Device_ControlRequest(void)
Endpoint_ClearStatusStage();
break;
case REQ_DFU_GETSTATUS:
case DFU_REQ_GETSTATUS:
Endpoint_ClearSETUP();
/* Write 8-bit status value */
Endpoint_Write_Byte(DFU_Status);
Endpoint_Write_8(DFU_Status);
/* Write 24-bit poll timeout value */
Endpoint_Write_Byte(0);
Endpoint_Write_Word_LE(0);
Endpoint_Write_8(0);
Endpoint_Write_16_LE(0);
/* Write 8-bit state value */
Endpoint_Write_Byte(DFU_State);
Endpoint_Write_8(DFU_State);
/* Write 8-bit state string ID number */
Endpoint_Write_Byte(0);
Endpoint_Write_8(0);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
break;
case REQ_DFU_CLRSTATUS:
case DFU_REQ_CLRSTATUS:
Endpoint_ClearSETUP();
/* Reset the status value variable to the default OK status */
@@ -436,17 +477,17 @@ void EVENT_USB_Device_ControlRequest(void)
Endpoint_ClearStatusStage();
break;
case REQ_DFU_GETSTATE:
case DFU_REQ_GETSTATE:
Endpoint_ClearSETUP();
/* Write the current device state to the endpoint */
Endpoint_Write_Byte(DFU_State);
Endpoint_Write_8(DFU_State);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
break;
case REQ_DFU_ABORT:
case DFU_REQ_ABORT:
Endpoint_ClearSETUP();
/* Reset the current state variable to the default idle state */
@@ -479,7 +520,7 @@ static void DiscardFillerBytes(uint8_t NumberOfBytes)
}
else
{
Endpoint_Discard_Byte();
Endpoint_Discard_8();
}
}
}

20
Micropendous/libs/LUFA/Bootloaders/DFU/BootloaderDFU.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -44,11 +44,13 @@
#include <avr/eeprom.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stdbool.h>
#include "Descriptors.h"
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
/* Macros: */
/** Configuration define. Define this token to true to case the bootloader to reject all memory commands
@@ -102,25 +104,25 @@
#define DFU_FILLER_BYTES_SIZE 26
/** DFU class command request to detach from the host. */
#define REQ_DFU_DETATCH 0x00
#define DFU_REQ_DETATCH 0x00
/** DFU class command request to send data from the host to the bootloader. */
#define REQ_DFU_DNLOAD 0x01
#define DFU_REQ_DNLOAD 0x01
/** DFU class command request to send data from the bootloader to the host. */
#define REQ_DFU_UPLOAD 0x02
#define DFU_REQ_UPLOAD 0x02
/** DFU class command request to get the current DFU status and state from the bootloader. */
#define REQ_DFU_GETSTATUS 0x03
#define DFU_REQ_GETSTATUS 0x03
/** DFU class command request to reset the current DFU status and state variables to their defaults. */
#define REQ_DFU_CLRSTATUS 0x04
#define DFU_REQ_CLRSTATUS 0x04
/** DFU class command request to get the current DFU state of the bootloader. */
#define REQ_DFU_GETSTATE 0x05
#define DFU_REQ_GETSTATE 0x05
/** DFU class command request to abort the current multi-request transfer and return to the dfuIDLE state. */
#define REQ_DFU_ABORT 0x06
#define DFU_REQ_ABORT 0x06
/** DFU command to begin programming the device's memory. */
#define COMMAND_PROG_START 0x01

62
Micropendous/libs/LUFA/Bootloaders/DFU/BootloaderDFU.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage DFU Class USB AVR Bootloader
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -15,7 +15,7 @@
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -42,34 +42,54 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* This bootloader enumerates to the host as a DFU Class device, allowing for DFU-compatible programming
* software to load firmware onto the AVR.
*
* This bootloader is compatible with Atmel's FLIP application. However, it requires the use of Atmel's
* DFU drivers. You will need to install Atmel's DFU drivers prior to using this bootloader. If you are
* using a 64 bit Windows OS, you will need to either disable the driver signing requirement (see online
* tutorials for details) or use a digitally signed version of the official Atmel driver provided by a
* third party AVR user at
* <a>http://www.avrfreaks.net/index.php?module=Freaks%20Academy&func=viewItem&item_id=2196&item_type=project</a>.
*
* As an open-source option, this bootloader is also compatible with the Linux Atmel USB DFU Programmer
* software, available for download at <a>http://sourceforge.net/projects/dfu-programmer/</a>.
*
* If SECURE_MODE is defined as true, upon start-up the bootloader will be locked, with only the chip erase
* function available (similar to Atmel's DFU bootloader). If SECURE_MODE is defined as false, all functions
* are usable on start-up without the prerequisite firmware erase.
*
* Out of the box this bootloader builds for the USB1287, and should fit into 4KB of bootloader space. If
* you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
* values in the accompanying makefile.
*
* <b>NOTE:</b> This device spoofs Atmel's DFU Bootloader USB VID and PID so that the Atmel DFU bootloader
* drivers included with FLIP will work. If you do not wish to use Atmel's ID codes, please
* manually change them in Descriptors.c and alter your driver's INF file accordingly.
* When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the
* bootloader from the normal user application.
*
* \section SSec_Options Project Options
* \section Sec_Installation Driver Installation
*
* This bootloader is designed to be compatible with Atmel's provided Windows DFU class drivers. You will need to
* install Atmel's DFU drivers prior to using this bootloader on Windows platforms. If you are using a 64 bit Windows
* OS, you will need to either disable the driver signing requirement (see online tutorials for details) or use a
* digitally signed version of the official Atmel driver provided by a third party AVR user at
* <a>http://www.avrfreaks.net/index.php?module=Freaks%20Academy&func=viewItem&item_id=2196&item_type=project</a>.
*
* \note This device spoofs Atmel's DFU Bootloader USB VID and PID so that the Atmel DFU bootloader
* drivers included with FLIP will work. If you do not wish to use Atmel's ID codes, please
* manually change them in Descriptors.c and alter your driver's INF file accordingly.
*
* \section Sec_HostApp Host Controller Application
*
* This bootloader is compatible with Atmel's FLIP utility on Windows machines, and dfu-programmer on Linux machines.
*
* \subsection SSec_FLIP FLIP (Windows)
*
* FLIP (Flexible In-System Programmer) is a utility written by Atmel, and distributed for free on the Atmel website.
* The FLIP utility is designed to assist in the bootloader programming of a range of Atmel devices, through several
* popular physical interfaces including USB. It is written in Java, however makes use of native extensions for USB
* support and thus is only offered on Windows.
*
* To program a device using FLIP, refer to the Atmel FLIP documentation.
*
* \subsection SSec_DFUProgrammer dfu-programmer (Linux)
*
* dfu-programmer is an open-source command line solution for the bootloader programming of Atmel devices through a
* USB connection, using the DFU protocol, available for download at <a>http://sourceforge.net/projects/dfu-programmer/</a>.
*
* The following example loads a HEX file into the AVR's FLASH memory using dfu-programmer:
* \code
* dfu-programmer at90usb1287 erase flash Mouse.hex
* \endcode
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*

28
Micropendous/libs/LUFA/Bootloaders/DFU/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -42,7 +42,7 @@
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t DeviceDescriptor =
const USB_Descriptor_Device_t DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -69,21 +69,21 @@ USB_Descriptor_Device_t DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t ConfigurationDescriptor =
const USB_Descriptor_Configuration_t ConfigurationDescriptor =
{
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED,
.ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED,
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.DFU_Interface =
@@ -109,7 +109,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
.Attributes = (ATTR_CAN_UPLOAD | ATTR_CAN_DOWNLOAD),
.DetachTimeout = 0x0000,
.TransferSize = 0x0c00,
.TransferSize = 0x0C00,
.DFUSpecification = VERSION_BCD(01.01)
}
@@ -119,7 +119,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t LanguageString =
const USB_Descriptor_String_t LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -130,7 +130,7 @@ USB_Descriptor_String_t LanguageString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t ProductString =
const USB_Descriptor_String_t ProductString =
{
.Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},

40
Micropendous/libs/LUFA/Bootloaders/DFU/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -117,12 +117,12 @@
#define PRODUCT_ID_CODE 0x2FF7
#define AVR_SIGNATURE_1 0x1E
#define AVR_SIGNATURE_2 0x93
#define AVR_SIGNATURE_3 0x82
#define AVR_SIGNATURE_3 0x89
#elif defined(__AVR_AT90USB82__)
#define PRODUCT_ID_CODE 0x2FEE
#define AVR_SIGNATURE_1 0x1E
#define AVR_SIGNATURE_2 0x93
#define AVR_SIGNATURE_3 0x89
#define AVR_SIGNATURE_2 0x94
#define AVR_SIGNATURE_3 0x82
#else
#error The selected AVR part is not currently supported by this bootloader.
#endif
@@ -137,21 +137,21 @@
*/
typedef struct
{
USB_Descriptor_Header_t Header; /**< Standard descriptor header structure */
USB_Descriptor_Header_t Header; /**< Standard descriptor header structure */
uint8_t Attributes; /**< DFU device attributes, a mask comprising of the
* ATTR_* macros listed in this source file
*/
uint16_t DetachTimeout; /**< Timeout in milliseconds between a USB_DETACH
* command being issued and the device detaching
* from the USB bus
*/
uint16_t TransferSize; /**< Maximum number of bytes the DFU device can accept
* from the host in a transaction
*/
uint16_t DFUSpecification; /**< BCD packed DFU specification number this DFU
* device complies with
*/
uint8_t Attributes; /**< DFU device attributes, a mask comprising of the
* ATTR_* macros listed in this source file
*/
uint16_t DetachTimeout; /**< Timeout in milliseconds between a USB_DETACH
* command being issued and the device detaching
* from the USB bus
*/
uint16_t TransferSize; /**< Maximum number of bytes the DFU device can accept
* from the host in a transaction
*/
uint16_t DFUSpecification; /**< BCD packed DFU specification number this DFU
* device complies with
*/
} USB_Descriptor_DFU_Functional_t;
/** Type define for the device configuration descriptor structure. This must be defined in the
@@ -161,6 +161,8 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// DFU Interface
USB_Descriptor_Interface_t DFU_Interface;
USB_Descriptor_DFU_Functional_t DFU_Functional;
} USB_Descriptor_Configuration_t;

41
Micropendous/libs/LUFA/Bootloaders/DFU/makefile
View File

@@ -51,6 +51,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -63,8 +67,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -72,7 +76,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -82,15 +86,17 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Starting byte address of the bootloader, as a byte address - computed via the formula
# BOOT_START = ((TOTAL_FLASH_BYTES - BOOTLOADER_SECTION_SIZE_BYTES) * 1024)
# BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024)
#
# Note that the bootloader size and start address given in AVRStudio is in words and not
# bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
BOOT_START = 0x1E000
FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 4
BOOT_START = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
# Output format. (can be srec, ihex, binary)
@@ -122,7 +128,6 @@ LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENAB
LUFA_OPTS += -D NO_INTERNAL_SERIAL
LUFA_OPTS += -D NO_DEVICE_SELF_POWER
LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D NO_SOF_EVENTS
@@ -180,22 +185,23 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
CPPDEFS += $(LUFA_OPTS)
@@ -675,13 +681,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -693,5 +708,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program debug gdb-config
clean_list clean_doxygen program debug gdb-config checksource

0
Micropendous/libs/LUFA/Bootloaders/TeensyHID/TeensyHID.c → Micropendous/libs/LUFA/Bootloaders/HID/BootloaderHID.c
View File

0
Micropendous/libs/LUFA/Bootloaders/TeensyHID/TeensyHID.h → Micropendous/libs/LUFA/Bootloaders/HID/BootloaderHID.h
View File

0
Micropendous/libs/LUFA/Bootloaders/TeensyHID/TeensyHID.txt → Micropendous/libs/LUFA/Bootloaders/HID/BootloaderHID.txt
View File

0
Micropendous/libs/LUFA/Bootloaders/TeensyHID/Descriptors.c → Micropendous/libs/LUFA/Bootloaders/HID/Descriptors.c
View File

0
Micropendous/libs/LUFA/Bootloaders/TeensyHID/Descriptors.h → Micropendous/libs/LUFA/Bootloaders/HID/Descriptors.h
View File

0
Micropendous/libs/LUFA/Bootloaders/TeensyHID/Doxygen.conf → Micropendous/libs/LUFA/Bootloaders/HID/Doxygen.conf
View File

0
Micropendous/libs/LUFA/Bootloaders/TeensyHID/makefile → Micropendous/libs/LUFA/Bootloaders/HID/makefile
View File

18
Micropendous/libs/LUFA/Bootloaders/makefile
View File

@@ -1,6 +1,6 @@
#
# LUFA Library
# Copyright (C) Dean Camera, 2010.
# Copyright (C) Dean Camera, 2011.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
@@ -14,13 +14,17 @@
# code.
all:
$(MAKE) -C DFU clean
$(MAKE) -C DFU all
$(MAKE) -C CDC clean
$(MAKE) -C CDC all
%:
$(MAKE) -C DFU $@
$(MAKE) -C CDC $@
$(MAKE) -C HID clean
$(MAKE) -C HID all
$(MAKE) -C DFU clean
$(MAKE) -C DFU all
%:
$(MAKE) -C CDC $@
$(MAKE) -C DFU $@
$(MAKE) -C HID $@

79
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioInput/AudioInput.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -51,6 +51,10 @@ USB_ClassInfo_Audio_Device_t Microphone_Audio_Interface =
},
};
/** Current audio sampling frequency of the streaming audio endpoint. */
static uint32_t CurrentAudioSampleFrequency = 48000;
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
@@ -94,7 +98,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
{
uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
/* Check if the sample reload timer period has elapsed, and that the USB bus is ready for a new sample */
/* Check that the USB bus is ready for the next sample to write */
if (Audio_Device_IsReadyForNextSample(&Microphone_Audio_Interface))
{
int16_t AudioSample;
@@ -132,7 +136,7 @@ void EVENT_USB_Device_Connect(void)
/* Sample reload timer initialization */
TIMSK0 = (1 << OCIE0A);
OCR0A = ((F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1);
OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
TCCR0A = (1 << WGM01); // CTC mode
TCCR0B = (1 << CS01); // Fcpu/8 speed
}
@@ -162,3 +166,70 @@ void EVENT_USB_Device_ControlRequest(void)
Audio_Device_ProcessControlRequest(&Microphone_Audio_Interface);
}
/** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
* in the user application to handle property manipulations on streaming audio endpoints.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
* to indicate the size of the retreived data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
* \param[in] EndpointProperty Property of the endpoint to get or set, a value from Audio_ClassRequests_t.
* \param[in] EndpointAddress Address of the streaming endpoint whose property is being referenced.
* \param[in] EndpointControl Parameter of the endpoint to get or set, a value from Audio_EndpointControls_t.
* \param[in,out] DataLength For SET operations, the length of the parameter data to set. For GET operations, the maximum
* length of the retrieved data. When NULL, the function should return whether the given property
* and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
* \param[in,out] Data Pointer to a location where the parameter data is stored for SET operations, or where
* the retrieved data is to be stored for GET operations.
*
* \return Boolean true if the property get/set was successful, false otherwise
*/
bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t EndpointProperty,
const uint8_t EndpointAddress,
const uint8_t EndpointControl,
uint16_t* const DataLength,
uint8_t* Data)
{
/* Check the requested endpoint to see if a supported endpoint is being manipulated */
if (EndpointAddress == (ENDPOINT_DIR_IN | Microphone_Audio_Interface.Config.DataINEndpointNumber))
{
/* Check the requested control to see if a supported control is being manipulated */
if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)
{
switch (EndpointProperty)
{
case AUDIO_REQ_SetCurrent:
/* Check if we are just testing for a valid property, or actually adjusting it */
if (DataLength != NULL)
{
/* Set the new sampling frequency to the value given by the host */
CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
/* Adjust sample reload timer to the new frequency */
OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
}
return true;
case AUDIO_REQ_GetCurrent:
/* Check if we are just testing for a valid property, or actually reading it */
if (DataLength != NULL)
{
*DataLength = 3;
Data[2] = (CurrentAudioSampleFrequency >> 16);
Data[1] = (CurrentAudioSampleFrequency >> 8);
Data[0] = (CurrentAudioSampleFrequency & 0xFF);
}
return true;
}
}
}
return false;
}

6
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioInput/AudioInput.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -57,7 +57,7 @@
/** ADC channel MUX mask for the microphone input. */
#define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2
/** Maximum ADC sample value for the microphone input. */
/** Maximum audio sample value for the microphone input. */
#define SAMPLE_MAX_RANGE 0xFFFF
/** Maximum ADC range for the microphone input. */

13
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage Audio Input Device Demo
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -14,7 +14,7 @@
* - Series 6 USB AVRs (AT90USBxxx6)
* - Series 4 USB AVRs (ATMEGAxxU4)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -43,7 +43,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* Audio demonstration application. This gives a simple reference
* application for implementing a USB Audio Input device using the
@@ -61,7 +61,7 @@
* Under Windows, if a driver request dialogue pops up, select the option
* to automatically install the appropriate drivers.
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
@@ -82,11 +82,6 @@
* <td>Makefile LUFA_OPTS</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* <tr>
* <td>AUDIO_SAMPLE_FREQUENCY</td>
* <td>Descriptors.h</td>
* <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>
* </tr>
* </table>
*/

36
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioInput/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -42,7 +42,7 @@
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -55,7 +55,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
.VendorID = 0x03EB,
.ProductID = 0x2047,
.ReleaseNumber = VERSION_BCD(00.01),
.ReleaseNumber = VERSION_BCD(00.02),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
@@ -69,7 +69,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -191,7 +191,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.Audio_AudioFormat =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t), .Type = DTYPE_CSInterface},
.Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
.Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_FormatType,
.FormatType = 0x01,
@@ -199,9 +201,17 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.SubFrameSize = 0x02,
.BitResolution = 16,
.SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES,
.SampleFrequencies = {AUDIO_SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)}
.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t))
},
.Audio_AudioFormatSampleRates =
{
AUDIO_SAMPLE_FREQ(8000),
AUDIO_SAMPLE_FREQ(11025),
AUDIO_SAMPLE_FREQ(22050),
AUDIO_SAMPLE_FREQ(44100),
AUDIO_SAMPLE_FREQ(48000),
},
.Audio_StreamEndpoint =
@@ -210,7 +220,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | AUDIO_STREAM_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM),
.Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = AUDIO_STREAM_EPSIZE,
.PollingIntervalMS = 0x01
@@ -225,7 +235,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
.Subtype = AUDIO_DSUBTYPE_CSEndpoint_General,
.Attributes = AUDIO_EP_ACCEPTS_SMALL_PACKETS,
.Attributes = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
.LockDelayUnits = 0x00,
.LockDelay = 0x0000
@@ -236,7 +246,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -247,7 +257,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -258,7 +268,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},

12
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioInput/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -51,9 +51,6 @@
*/
#define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM)
/** Sample frequency of the data being transmitted through the streaming endpoint. */
#define AUDIO_SAMPLE_FREQUENCY 48000
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
@@ -62,14 +59,19 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Audio Control Interface
USB_Descriptor_Interface_t Audio_ControlInterface;
USB_Audio_Descriptor_Interface_AC_t Audio_ControlInterface_SPC;
USB_Audio_Descriptor_InputTerminal_t Audio_InputTerminal;
USB_Audio_Descriptor_OutputTerminal_t Audio_OutputTerminal;
// Audio Streaming Interface
USB_Descriptor_Interface_t Audio_StreamInterface_Alt0;
USB_Descriptor_Interface_t Audio_StreamInterface_Alt1;
USB_Audio_Descriptor_Interface_AS_t Audio_StreamInterface_SPC;
USB_Audio_Descriptor_Format_t Audio_AudioFormat;
USB_Audio_SampleFreq_t Audio_AudioFormatSampleRates[5];
USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
} USB_Descriptor_Configuration_t;

36
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioInput/makefile
View File

@@ -63,6 +63,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -181,21 +185,21 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -693,13 +697,21 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -712,5 +724,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
debug gdb-config checksource

78
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -51,6 +51,10 @@ USB_ClassInfo_Audio_Device_t Speaker_Audio_Interface =
},
};
/** Current audio sampling frequency of the streaming audio endpoint. */
static uint32_t CurrentAudioSampleFrequency = 48000;
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
@@ -88,6 +92,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
{
uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
/* Check that the USB bus is ready for the next sample to read */
if (Audio_Device_IsSampleReceived(&Speaker_Audio_Interface))
{
/* Retrieve the signed 16-bit left and right audio samples, convert to 8-bit */
@@ -134,7 +139,7 @@ void EVENT_USB_Device_Connect(void)
/* Sample reload timer initialization */
TIMSK0 = (1 << OCIE0A);
OCR0A = ((F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1);
OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
TCCR0A = (1 << WGM01); // CTC mode
TCCR0B = (1 << CS01); // Fcpu/8 speed
@@ -198,3 +203,70 @@ void EVENT_USB_Device_ControlRequest(void)
Audio_Device_ProcessControlRequest(&Speaker_Audio_Interface);
}
/** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
* in the user application to handle property manipulations on streaming audio endpoints.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
* to indicate the size of the retreived data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
* \param[in] EndpointProperty Property of the endpoint to get or set, a value from Audio_ClassRequests_t.
* \param[in] EndpointAddress Address of the streaming endpoint whose property is being referenced.
* \param[in] EndpointControl Parameter of the endpoint to get or set, a value from Audio_EndpointControls_t.
* \param[in,out] DataLength For SET operations, the length of the parameter data to set. For GET operations, the maximum
* length of the retrieved data. When NULL, the function should return whether the given property
* and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
* \param[in,out] Data Pointer to a location where the parameter data is stored for SET operations, or where
* the retrieved data is to be stored for GET operations.
*
* \return Boolean true if the property get/set was successful, false otherwise
*/
bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t EndpointProperty,
const uint8_t EndpointAddress,
const uint8_t EndpointControl,
uint16_t* const DataLength,
uint8_t* Data)
{
/* Check the requested endpoint to see if a supported endpoint is being manipulated */
if (EndpointAddress == (ENDPOINT_DIR_OUT | Speaker_Audio_Interface.Config.DataOUTEndpointNumber))
{
/* Check the requested control to see if a supported control is being manipulated */
if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)
{
switch (EndpointProperty)
{
case AUDIO_REQ_SetCurrent:
/* Check if we are just testing for a valid property, or actually adjusting it */
if (DataLength != NULL)
{
/* Set the new sampling frequency to the value given by the host */
CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
/* Adjust sample reload timer to the new frequency */
OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
}
return true;
case AUDIO_REQ_GetCurrent:
/* Check if we are just testing for a valid property, or actually reading it */
if (DataLength != NULL)
{
*DataLength = 3;
Data[2] = (CurrentAudioSampleFrequency >> 16);
Data[1] = (CurrentAudioSampleFrequency >> 8);
Data[0] = (CurrentAudioSampleFrequency & 0xFF);
}
return true;
}
}
}
return false;
}

4
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted

13
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage Audio Output Device Demo
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -14,7 +14,7 @@
* - Series 6 USB AVRs (AT90USBxxx6)
* - Series 4 USB AVRs (ATMEGAxxU4)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -43,7 +43,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* Audio demonstration application. This gives a simple reference
* application for implementing a USB Audio Output device using the
@@ -61,7 +61,7 @@
* Under Windows, if a driver request dialogue pops up, select the option
* to automatically install the appropriate drivers.
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
@@ -87,11 +87,6 @@
* <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
* external DAC.</td>
* </tr>
* <tr>
* <td>AUDIO_SAMPLE_FREQUENCY</td>
* <td>Descriptors.h</td>
* <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>
* </tr>
* </table>
*/

36
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioOutput/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -42,7 +42,7 @@
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -55,7 +55,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
.VendorID = 0x03EB,
.ProductID = 0x2046,
.ReleaseNumber = VERSION_BCD(00.01),
.ReleaseNumber = VERSION_BCD(00.02),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
@@ -69,7 +69,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -191,7 +191,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.Audio_AudioFormat =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t), .Type = DTYPE_CSInterface},
.Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
.Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_FormatType,
.FormatType = 0x01,
@@ -200,8 +202,16 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.SubFrameSize = 0x02,
.BitResolution = 16,
.SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES,
.SampleFrequencies = {AUDIO_SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)}
.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
},
.Audio_AudioFormatSampleRates =
{
AUDIO_SAMPLE_FREQ(8000),
AUDIO_SAMPLE_FREQ(11025),
AUDIO_SAMPLE_FREQ(22050),
AUDIO_SAMPLE_FREQ(44100),
AUDIO_SAMPLE_FREQ(48000),
},
.Audio_StreamEndpoint =
@@ -210,7 +220,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | AUDIO_STREAM_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM),
.Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = AUDIO_STREAM_EPSIZE,
.PollingIntervalMS = 0x01
@@ -225,7 +235,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
.Subtype = AUDIO_DSUBTYPE_CSEndpoint_General,
.Attributes = AUDIO_EP_ACCEPTS_SMALL_PACKETS,
.Attributes = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
.LockDelayUnits = 0x00,
.LockDelay = 0x0000
@@ -236,7 +246,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -247,7 +257,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -258,7 +268,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String},

12
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioOutput/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -51,9 +51,6 @@
*/
#define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM)
/** Sample frequency of the data being transmitted through the streaming endpoint. */
#define AUDIO_SAMPLE_FREQUENCY 48000
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
@@ -62,14 +59,19 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Audio Control Interface
USB_Descriptor_Interface_t Audio_ControlInterface;
USB_Audio_Descriptor_Interface_AC_t Audio_ControlInterface_SPC;
USB_Audio_Descriptor_InputTerminal_t Audio_InputTerminal;
USB_Audio_Descriptor_OutputTerminal_t Audio_OutputTerminal;
// Audio Streaming Interface
USB_Descriptor_Interface_t Audio_StreamInterface_Alt0;
USB_Descriptor_Interface_t Audio_StreamInterface_Alt1;
USB_Audio_Descriptor_Interface_AS_t Audio_StreamInterface_SPC;
USB_Audio_Descriptor_Format_t Audio_AudioFormat;
USB_Audio_SampleFreq_t Audio_AudioFormatSampleRates[5];
USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
} USB_Descriptor_Configuration_t;

37
Micropendous/libs/LUFA/Demos/Device/ClassDriver/AudioOutput/makefile
View File

@@ -63,6 +63,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -182,21 +186,21 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -694,13 +698,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -713,5 +726,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
debug gdb-config checksource

173
Micropendous/libs/LUFA/Demos/Device/ClassDriver/CDC/CDC.c
View File

@@ -1,173 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the CDC demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "CDC.h"
/** LUFA CDC Class driver interface configuration and state information. This structure is
* passed to all CDC Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another.
*/
USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
{
.Config =
{
.ControlInterfaceNumber = 0,
.DataINEndpointNumber = CDC_TX_EPNUM,
.DataINEndpointSize = CDC_TXRX_EPSIZE,
.DataOUTEndpointNumber = CDC_RX_EPNUM,
.DataOUTEndpointSize = CDC_TXRX_EPSIZE,
.NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM,
.NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE,
},
};
#if 0
/* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in
* <stdio.h> can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string).
*/
static int CDC_putchar(char c, FILE *stream)
{
CDC_Device_SendByte(&VirtualSerial_CDC_Interface, c);
return 0;
}
static int CDC_getchar(FILE *stream)
{
if (!(CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface)))
return -1;
return CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
}
static FILE USBSerial = FDEV_SETUP_STREAM(CDC_putchar, CDC_getchar, _FDEV_SETUP_RW);
#endif
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
CheckJoystickMovement();
/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
while (CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface))
CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
Joystick_Init();
LEDs_Init();
USB_Init();
}
/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
void CheckJoystickMovement(void)
{
uint8_t JoyStatus_LCL = Joystick_GetStatus();
char* ReportString = NULL;
static bool ActionSent = false;
if (JoyStatus_LCL & JOY_UP)
ReportString = "Joystick Up\r\n";
else if (JoyStatus_LCL & JOY_DOWN)
ReportString = "Joystick Down\r\n";
else if (JoyStatus_LCL & JOY_LEFT)
ReportString = "Joystick Left\r\n";
else if (JoyStatus_LCL & JOY_RIGHT)
ReportString = "Joystick Right\r\n";
else if (JoyStatus_LCL & JOY_PRESS)
ReportString = "Joystick Pressed\r\n";
else
ActionSent = false;
if ((ReportString != NULL) && (ActionSent == false))
{
ActionSent = true;
CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString, strlen(ReportString));
}
}
/** Event handler for the library USB Connection event. */
void EVENT_USB_Device_Connect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the library USB Disconnection event. */
void EVENT_USB_Device_Disconnect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface)))
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Event handler for the library USB Unhandled Control Request event. */
void EVENT_USB_Device_UnhandledControlRequest(void)
{
CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
}

77
Micropendous/libs/LUFA/Demos/Device/ClassDriver/CDC/CDC.txt
View File

@@ -1,77 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Communications Device Class Demo (Virtual Serial Port)
*
* \section SSec_Compat Demo Compatibility:
*
* The following table indicates what microcontrollers are compatible with this demo.
*
* - AT90USB1287
* - AT90USB1286
* - AT90USB647
* - AT90USB646
* - ATMEGA32U6
* - ATMEGA32U4
* - ATMEGA16U4
* - AT90USB162
* - AT90USB82
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Communications Device Class (CDC)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Abstract Control Model (ACM)</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF CDC Class Standard</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Communications Device Class demonstration application.
* This gives a simple reference application for implementing
* a CDC device acting as a virtual serial port. Joystick
* actions are transmitted to the host as strings. The device
* does not respond to serial data sent from the host.
*
* After running this demo for the first time on a new computer,
* you will need to supply the .INF file located in this demo
* project's directory as the device's driver when running under
* Windows. This will enable Windows to use its inbuilt CDC drivers,
* negating the need for custom drivers for the device. Other
* Operating Systems should automatically use their own inbuilt
* CDC-ACM drivers.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

84
Micropendous/libs/LUFA/Demos/Device/ClassDriver/CDC/Descriptors.h
View File

@@ -1,84 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
/* Includes: */
#include <avr/pgmspace.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/CDC.h>
/* Macros: */
/** Endpoint number of the CDC device-to-host notification IN endpoint. */
#define CDC_NOTIFICATION_EPNUM 2
/** Endpoint number of the CDC device-to-host data IN endpoint. */
#define CDC_TX_EPNUM 3
/** Endpoint number of the CDC host-to-device data OUT endpoint. */
#define CDC_RX_EPNUM 4
/** Size in bytes of the CDC device-to-host notification IN endpoint. */
#define CDC_NOTIFICATION_EPSIZE 8
/** Size in bytes of the CDC data IN and OUT endpoints. */
#define CDC_TXRX_EPSIZE 16
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
*/
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
USB_Descriptor_Interface_t CCI_Interface;
CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_IntHeader;
CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_CallManagement;
CDC_FUNCTIONAL_DESCRIPTOR(1) CDC_Functional_AbstractControlManagement;
CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_Union;
USB_Descriptor_Endpoint_t ManagementEndpoint;
USB_Descriptor_Interface_t DCI_Interface;
USB_Descriptor_Endpoint_t DataOutEndpoint;
USB_Descriptor_Endpoint_t DataInEndpoint;
} USB_Descriptor_Configuration_t;
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

106
Micropendous/libs/LUFA/Demos/Device/ClassDriver/CDC/LUFA CDC.inf
View File

@@ -1,106 +0,0 @@
;************************************************************
; Windows USB CDC ACM Setup File
; Copyright (c) 2000 Microsoft Corporation
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MFGNAME%
LayoutFile=layout.inf
CatalogFile=%MFGFILENAME%.cat
DriverVer=11/15/2007,5.1.2600.0
[Manufacturer]
%MFGNAME%=DeviceList, NTamd64
[DestinationDirs]
DefaultDestDir=12
;------------------------------------------------------------------------------
; Windows 2000/XP/Vista-32bit Sections
;------------------------------------------------------------------------------
[DriverInstall.nt]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles.nt
AddReg=DriverInstall.nt.AddReg
[DriverCopyFiles.nt]
usbser.sys,,,0x20
[DriverInstall.nt.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[DriverInstall.nt.Services]
AddService=usbser, 0x00000002, DriverService.nt
[DriverService.nt]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\%DRIVERFILENAME%.sys
;------------------------------------------------------------------------------
; Vista-64bit Sections
;------------------------------------------------------------------------------
[DriverInstall.NTamd64]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles.NTamd64
AddReg=DriverInstall.NTamd64.AddReg
[DriverCopyFiles.NTamd64]
%DRIVERFILENAME%.sys,,,0x20
[DriverInstall.NTamd64.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[DriverInstall.NTamd64.Services]
AddService=usbser, 0x00000002, DriverService.NTamd64
[DriverService.NTamd64]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\%DRIVERFILENAME%.sys
;------------------------------------------------------------------------------
; Vendor and Product ID Definitions
;------------------------------------------------------------------------------
; When developing your USB device, the VID and PID used in the PC side
; application program and the firmware on the microcontroller must match.
; Modify the below line to use your VID and PID. Use the format as shown below.
; Note: One INF file can be used for multiple devices with different VID and PIDs.
; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
;------------------------------------------------------------------------------
[SourceDisksFiles]
[SourceDisksNames]
[DeviceList]
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
[DeviceList.NTamd64]
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
;------------------------------------------------------------------------------
; String Definitions
;------------------------------------------------------------------------------
;Modify these strings to customize your device
;------------------------------------------------------------------------------
[Strings]
MFGFILENAME="CDC_vista"
DRIVERFILENAME ="usbser"
MFGNAME="CCS, Inc."
INSTDISK="LUFA CDC Driver Installer"
DESCRIPTION="Communications Port"
SERVICE="USB RS-232 Emulation Driver"

397
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualCDC/Descriptors.c
View File

@@ -1,397 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
*/
#include "Descriptors.h"
/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
* the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
* This allows the host to track a device across insertions on different ports, allowing them to retain allocated
* resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
* so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
* from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
* port location).
*/
#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
#warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
.Class = 0xEF,
.SubClass = 0x02,
.Protocol = 0x01,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x204E,
.ReleaseNumber = 0x0000,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = USE_INTERNAL_SERIAL,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
* of the device in one of its supported configurations, including information about any device interfaces
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 4,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.IAD1 =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
.FirstInterfaceIndex = 0,
.TotalInterfaces = 2,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
.IADStrIndex = NO_DESCRIPTOR
},
.CDC1_CCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0,
.AlternateSetting = 0,
.TotalEndpoints = 1,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC1_Functional_IntHeader =
{
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x00,
.Data = {0x01, 0x10}
},
.CDC1_Functional_CallManagement =
{
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x01,
.Data = {0x03, 0x01}
},
.CDC1_Functional_AbstractControlManagement =
{
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
.SubType = 0x02,
.Data = {0x06}
},
.CDC1_Functional_Union =
{
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x06,
.Data = {0x00, 0x01}
},
.CDC1_ManagementEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_NOTIFICATION_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
.CDC1_DCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 1,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC1_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC1_RX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
.CDC1_DataInEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_TX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
.IAD2 =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
.FirstInterfaceIndex = 2,
.TotalInterfaces = 2,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
.IADStrIndex = NO_DESCRIPTOR
},
.CDC2_CCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 2,
.AlternateSetting = 0,
.TotalEndpoints = 1,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC2_Functional_IntHeader =
{
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x00,
.Data = {0x01, 0x10}
},
.CDC2_Functional_CallManagement =
{
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x01,
.Data = {0x03, 0x03}
},
.CDC2_Functional_AbstractControlManagement =
{
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
.SubType = 0x02,
.Data = {0x06}
},
.CDC2_Functional_Union =
{
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x06,
.Data = {0x02, 0x03}
},
.CDC2_ManagementEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_NOTIFICATION_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
.CDC2_DCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 3,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC2_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC2_RX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
.CDC2_DataInEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_TX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
}
};
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
.UnicodeString = L"LUFA Dual CDC Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
* documentation) by the application code so that the address and size of a requested descriptor can be given
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
{
const uint8_t DescriptorType = (wValue >> 8);
const uint8_t DescriptorNumber = (wValue & 0xFF);
void* Address = NULL;
uint16_t Size = NO_DESCRIPTOR;
switch (DescriptorType)
{
case DTYPE_Device:
Address = (void*)&DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
Address = (void*)&ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
switch (DescriptorNumber)
{
case 0x00:
Address = (void*)&LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
Address = (void*)&ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
Address = (void*)&ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}

104
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualCDC/Descriptors.h
View File

@@ -1,104 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
/* Includes: */
#include <avr/pgmspace.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/CDC.h>
/* Macros: */
/** Endpoint number of the first CDC interface's device-to-host notification IN endpoint. */
#define CDC1_NOTIFICATION_EPNUM 3
/** Endpoint number of the first CDC interface's device-to-host data IN endpoint. */
#define CDC1_TX_EPNUM 1
/** Endpoint number of the first CDC interface's host-to-device data OUT endpoint. */
#define CDC1_RX_EPNUM 2
/** Endpoint number of the second CDC interface's device-to-host notification IN endpoint. */
#define CDC2_NOTIFICATION_EPNUM 4
/** Endpoint number of the second CDC interface's device-to-host data IN endpoint. */
#define CDC2_TX_EPNUM 5
/** Endpoint number of the second CDC interface's host-to-device data OUT endpoint. */
#define CDC2_RX_EPNUM 6
/** Size in bytes of the CDC device-to-host notification IN endpoints. */
#define CDC_NOTIFICATION_EPSIZE 8
/** Size in bytes of the CDC data IN and OUT endpoints. */
#define CDC_TXRX_EPSIZE 16
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
*/
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
USB_Descriptor_Interface_Association_t IAD1;
USB_Descriptor_Interface_t CDC1_CCI_Interface;
CDC_FUNCTIONAL_DESCRIPTOR(2) CDC1_Functional_IntHeader;
CDC_FUNCTIONAL_DESCRIPTOR(2) CDC1_Functional_CallManagement;
CDC_FUNCTIONAL_DESCRIPTOR(1) CDC1_Functional_AbstractControlManagement;
CDC_FUNCTIONAL_DESCRIPTOR(2) CDC1_Functional_Union;
USB_Descriptor_Endpoint_t CDC1_ManagementEndpoint;
USB_Descriptor_Interface_t CDC1_DCI_Interface;
USB_Descriptor_Endpoint_t CDC1_DataOutEndpoint;
USB_Descriptor_Endpoint_t CDC1_DataInEndpoint;
USB_Descriptor_Interface_Association_t IAD2;
USB_Descriptor_Interface_t CDC2_CCI_Interface;
CDC_FUNCTIONAL_DESCRIPTOR(2) CDC2_Functional_IntHeader;
CDC_FUNCTIONAL_DESCRIPTOR(2) CDC2_Functional_CallManagement;
CDC_FUNCTIONAL_DESCRIPTOR(1) CDC2_Functional_AbstractControlManagement;
CDC_FUNCTIONAL_DESCRIPTOR(2) CDC2_Functional_Union;
USB_Descriptor_Endpoint_t CDC2_ManagementEndpoint;
USB_Descriptor_Interface_t CDC2_DCI_Interface;
USB_Descriptor_Endpoint_t CDC2_DataOutEndpoint;
USB_Descriptor_Endpoint_t CDC2_DataInEndpoint;
} USB_Descriptor_Configuration_t;
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

185
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualCDC/DualCDC.c
View File

@@ -1,185 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the DualCDC demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "DualCDC.h"
/** LUFA CDC Class driver interface configuration and state information. This structure is
* passed to all CDC Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another. This is for the first CDC interface,
* which sends strings to the host for each joystick movement.
*/
USB_ClassInfo_CDC_Device_t VirtualSerial1_CDC_Interface =
{
.Config =
{
.ControlInterfaceNumber = 0,
.DataINEndpointNumber = CDC1_TX_EPNUM,
.DataINEndpointSize = CDC_TXRX_EPSIZE,
.DataOUTEndpointNumber = CDC1_RX_EPNUM,
.DataOUTEndpointSize = CDC_TXRX_EPSIZE,
.NotificationEndpointNumber = CDC1_NOTIFICATION_EPNUM,
.NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE,
},
};
/** LUFA CDC Class driver interface configuration and state information. This structure is
* passed to all CDC Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another. This is for the second CDC interface,
* which echos back all received data from the host.
*/
USB_ClassInfo_CDC_Device_t VirtualSerial2_CDC_Interface =
{
.Config =
{
.ControlInterfaceNumber = 2,
.DataINEndpointNumber = CDC2_TX_EPNUM,
.DataINEndpointSize = CDC_TXRX_EPSIZE,
.DataOUTEndpointNumber = CDC2_RX_EPNUM,
.DataOUTEndpointSize = CDC_TXRX_EPSIZE,
.NotificationEndpointNumber = CDC2_NOTIFICATION_EPNUM,
.NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE,
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
CheckJoystickMovement();
/* Discard all received data on the first CDC interface */
while (CDC_Device_BytesReceived(&VirtualSerial1_CDC_Interface))
CDC_Device_ReceiveByte(&VirtualSerial1_CDC_Interface);
/* Echo all received data on the second CDC interface */
while (CDC_Device_BytesReceived(&VirtualSerial2_CDC_Interface))
CDC_Device_SendByte(&VirtualSerial2_CDC_Interface, CDC_Device_ReceiveByte(&VirtualSerial2_CDC_Interface));
CDC_Device_USBTask(&VirtualSerial1_CDC_Interface);
CDC_Device_USBTask(&VirtualSerial2_CDC_Interface);
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
Joystick_Init();
LEDs_Init();
USB_Init();
}
/** Checks for changes in the position of the board joystick, sending strings to the host upon each change
* through the first of the CDC interfaces.
*/
void CheckJoystickMovement(void)
{
uint8_t JoyStatus_LCL = Joystick_GetStatus();
char* ReportString = NULL;
static bool ActionSent = false;
if (JoyStatus_LCL & JOY_UP)
ReportString = "Joystick Up\r\n";
else if (JoyStatus_LCL & JOY_DOWN)
ReportString = "Joystick Down\r\n";
else if (JoyStatus_LCL & JOY_LEFT)
ReportString = "Joystick Left\r\n";
else if (JoyStatus_LCL & JOY_RIGHT)
ReportString = "Joystick Right\r\n";
else if (JoyStatus_LCL & JOY_PRESS)
ReportString = "Joystick Pressed\r\n";
else
ActionSent = false;
if ((ReportString != NULL) && (ActionSent == false))
{
ActionSent = true;
CDC_Device_SendString(&VirtualSerial1_CDC_Interface, ReportString, strlen(ReportString));
}
}
/** Event handler for the library USB Connection event. */
void EVENT_USB_Device_Connect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the library USB Disconnection event. */
void EVENT_USB_Device_Disconnect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial1_CDC_Interface)))
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial2_CDC_Interface)))
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Event handler for the library USB Unhandled Control Request event. */
void EVENT_USB_Device_UnhandledControlRequest(void)
{
CDC_Device_ProcessControlRequest(&VirtualSerial1_CDC_Interface);
CDC_Device_ProcessControlRequest(&VirtualSerial2_CDC_Interface);
}

89
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualCDC/DualCDC.txt
View File

@@ -1,89 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Dual Communications Device Class Device (Dual Virtual Serial Port)
*
* \section SSec_Compat Demo Compatibility:
*
* The following table indicates what microcontrollers are compatible with this demo.
*
* - AT90USB1287
* - AT90USB1286
* - AT90USB647
* - AT90USB646
* - ATMEGA32U6
* - ATMEGA32U4
* - ATMEGA16U4
* - AT90USB162
* - AT90USB82
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Miscellaneous Device Class</td>
* <td>( Sub-Interface: Communications Device Class (CDC) )</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Common Class</td>
* <td>( Sub-Interface: Abstract Control Model (ACM) )</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Interface Association Descriptor ECN</td>
* <td>USBIF CDC Class Standard</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Dual Communications Device Class demonstration application.
* This gives a simple reference application for implementing
* a compound device with dual CDC functions acting as a pair
* of virtual serial ports. This demo uses Interface Association
* Descriptors to link together the pair of related CDC
* descriptors for each virtual serial port, which may not be
* supported in all OSes - Windows Vista is supported, as is
* XP (although the latter may need a hotfix to function).
*
* Joystick actions are transmitted to the host as strings
* through the first serial port. The device does not respond to
* serial data sent from the host in the first serial port.
*
* The second serial port echoes back data sent from the host.
*
* After running this demo for the first time on a new computer,
* you will need to supply the .INF file located in this demo
* project's directory as the device's driver when running under
* Windows. This will enable Windows to use its inbuilt CDC drivers,
* negating the need for custom drivers for the device. Other
* Operating Systems should automatically use their own inbuilt
* CDC-ACM drivers.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

106
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualCDC/LUFA DualCDC.inf
View File

@@ -1,106 +0,0 @@
;************************************************************
; Windows USB CDC ACM Setup File
; Copyright (c) 2000 Microsoft Corporation
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MFGNAME%
LayoutFile=layout.inf
CatalogFile=%MFGFILENAME%.cat
DriverVer=11/15/2007,5.1.2600.0
[Manufacturer]
%MFGNAME%=DeviceList, NTamd64
[DestinationDirs]
DefaultDestDir=12
;------------------------------------------------------------------------------
; Windows 2000/XP/Vista-32bit Sections
;------------------------------------------------------------------------------
[DriverInstall.nt]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles.nt
AddReg=DriverInstall.nt.AddReg
[DriverCopyFiles.nt]
usbser.sys,,,0x20
[DriverInstall.nt.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[DriverInstall.nt.Services]
AddService=usbser, 0x00000002, DriverService.nt
[DriverService.nt]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\%DRIVERFILENAME%.sys
;------------------------------------------------------------------------------
; Vista-64bit Sections
;------------------------------------------------------------------------------
[DriverInstall.NTamd64]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles.NTamd64
AddReg=DriverInstall.NTamd64.AddReg
[DriverCopyFiles.NTamd64]
%DRIVERFILENAME%.sys,,,0x20
[DriverInstall.NTamd64.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[DriverInstall.NTamd64.Services]
AddService=usbser, 0x00000002, DriverService.NTamd64
[DriverService.NTamd64]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\%DRIVERFILENAME%.sys
;------------------------------------------------------------------------------
; Vendor and Product ID Definitions
;------------------------------------------------------------------------------
; When developing your USB device, the VID and PID used in the PC side
; application program and the firmware on the microcontroller must match.
; Modify the below line to use your VID and PID. Use the format as shown below.
; Note: One INF file can be used for multiple devices with different VID and PIDs.
; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
;------------------------------------------------------------------------------
[SourceDisksFiles]
[SourceDisksNames]
[DeviceList]
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
[DeviceList.NTamd64]
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
;------------------------------------------------------------------------------
; String Definitions
;------------------------------------------------------------------------------
;Modify these strings to customize your device
;------------------------------------------------------------------------------
[Strings]
MFGFILENAME="CDC_vista"
DRIVERFILENAME ="usbser"
MFGNAME="CCS, Inc."
INSTDISK="LUFA Dual CDC Driver Installer"
DESCRIPTION="Communications Port"
SERVICE="USB RS-232 Emulation Driver"

738
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualCDC/makefile
View File

@@ -1,738 +0,0 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, J<>rg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = DualCDC
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D USB_DEVICE_ONLY
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
Descriptors.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/CDC.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/CDC.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fno-inline-small-functions
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
$(LUFA_PATH)/LUFA/LUFA_Events.lst:
@make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
@echo
@echo Checking for invalid events...
@$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
@sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
@if test -s InvalidEvents.tmp; then exit 1; fi
showliboptions:
@echo
@echo ---- Compile Time Library Options ----
@for i in $(LUFA_OPTS:-D%=%); do \
echo $$i; \
done
@echo --------------------------------------
showtarget:
@echo
@echo --------- Target Information ---------
@echo AVR Model: $(MCU)
@echo Board: $(BOARD)
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
@echo --------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
$(COPY) $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVE) InvalidEvents.tmp
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkinvalidevents showliboptions \
showtarget begin finish end sizebefore sizeafter \
gccversion build elf hex eep lss sym coff extcoff \
program dfu flip flip-ee dfu-ee clean debug \
clean_list clean_binary gdb-config doxygen

26
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -54,7 +54,7 @@
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -81,7 +81,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -157,7 +157,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_NOTIFICATION_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | CDC1_NOTIFICATION_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
@@ -183,7 +183,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC1_RX_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_OUT | CDC1_RX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x01
@@ -193,7 +193,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_TX_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | CDC1_TX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x01
@@ -258,7 +258,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_NOTIFICATION_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | CDC2_NOTIFICATION_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
@@ -284,7 +284,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC2_RX_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_OUT | CDC2_RX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x01
@@ -294,7 +294,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_TX_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | CDC2_TX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x01
@@ -305,7 +305,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -316,7 +316,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -327,7 +327,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},

26
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -42,23 +42,23 @@
#include <LUFA/Drivers/USB/USB.h>
/* Macros: */
/** Endpoint number of the first CDC interface's device-to-host notification IN endpoint. */
#define CDC1_NOTIFICATION_EPNUM 3
/** Endpoint number of the first CDC interface's device-to-host data IN endpoint. */
#define CDC1_TX_EPNUM 1
/** Endpoint number of the first CDC interface's host-to-device data OUT endpoint. */
#define CDC1_RX_EPNUM 2
/** Endpoint number of the second CDC interface's device-to-host notification IN endpoint. */
#define CDC2_NOTIFICATION_EPNUM 4
/** Endpoint number of the first CDC interface's device-to-host notification IN endpoint. */
#define CDC1_NOTIFICATION_EPNUM 3
/** Endpoint number of the second CDC interface's device-to-host data IN endpoint. */
#define CDC2_TX_EPNUM 5
#define CDC2_TX_EPNUM 4
/** Endpoint number of the second CDC interface's host-to-device data OUT endpoint. */
#define CDC2_RX_EPNUM 6
#define CDC2_RX_EPNUM 5
/** Endpoint number of the second CDC interface's device-to-host notification IN endpoint. */
#define CDC2_NOTIFICATION_EPNUM 6
/** Size in bytes of the CDC device-to-host notification IN endpoints. */
#define CDC_NOTIFICATION_EPSIZE 8
@@ -74,21 +74,29 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// First CDC Control Interface
USB_Descriptor_Interface_Association_t CDC1_IAD;
USB_Descriptor_Interface_t CDC1_CCI_Interface;
USB_CDC_Descriptor_FunctionalHeader_t CDC1_Functional_Header;
USB_CDC_Descriptor_FunctionalACM_t CDC1_Functional_ACM;
USB_CDC_Descriptor_FunctionalUnion_t CDC1_Functional_Union;
USB_Descriptor_Endpoint_t CDC1_ManagementEndpoint;
// First CDC Data Interface
USB_Descriptor_Interface_t CDC1_DCI_Interface;
USB_Descriptor_Endpoint_t CDC1_DataOutEndpoint;
USB_Descriptor_Endpoint_t CDC1_DataInEndpoint;
// Second CDC Control Interface
USB_Descriptor_Interface_Association_t CDC2_IAD;
USB_Descriptor_Interface_t CDC2_CCI_Interface;
USB_CDC_Descriptor_FunctionalHeader_t CDC2_Functional_Header;
USB_CDC_Descriptor_FunctionalACM_t CDC2_Functional_ACM;
USB_CDC_Descriptor_FunctionalUnion_t CDC2_Functional_Union;
USB_Descriptor_Endpoint_t CDC2_ManagementEndpoint;
// Second CDC Data Interface
USB_Descriptor_Interface_t CDC2_DCI_Interface;
USB_Descriptor_Endpoint_t CDC2_DataOutEndpoint;
USB_Descriptor_Endpoint_t CDC2_DataInEndpoint;

7
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -86,6 +86,7 @@ USB_ClassInfo_CDC_Device_t VirtualSerial2_CDC_Interface =
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
@@ -156,7 +157,7 @@ void CheckJoystickMovement(void)
{
ActionSent = true;
CDC_Device_SendString(&VirtualSerial1_CDC_Interface, ReportString, strlen(ReportString));
CDC_Device_SendString(&VirtualSerial1_CDC_Interface, ReportString);
}
}

4
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted

8
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage Dual Communications Device Class (Dual Virtual Serial Port) Device
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -14,7 +14,7 @@
* - Series 6 USB AVRs (AT90USBxxx6)
* - Series 4 USB AVRs (ATMEGAxxU4)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -46,7 +46,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* Dual Communications Device Class demonstration application.
* This gives a simple reference application for implementing
@@ -71,7 +71,7 @@
* Operating Systems should automatically use their own inbuilt
* CDC-ACM drivers.
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*

37
Micropendous/libs/LUFA/Demos/Device/ClassDriver/DualVirtualSerial/makefile
View File

@@ -63,6 +63,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -178,21 +182,21 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -690,13 +694,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -709,5 +722,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
debug gdb-config checksource

42
Micropendous/libs/LUFA/Demos/Device/ClassDriver/GenericHID/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -43,24 +43,16 @@
* the device will send, and what it may be sent back from the host. Refer to the HID specification for
* more details on HID report descriptors.
*/
USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
const USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
{
0x06, 0x9c, 0xff, /* Usage Page (Vendor Defined) */
0x09, 0x01, /* Usage (Vendor Defined) */
0xa1, 0x01, /* Collection (Vendor Defined) */
0x09, 0x02, /* Usage (Vendor Defined) */
0x75, 0x08, /* Report Size (8) */
0x95, GENERIC_REPORT_SIZE, /* Report Count (GENERIC_REPORT_SIZE) */
0x15, 0x80, /* Logical Minimum (-128) */
0x25, 0x7F, /* Logical Maximum (127) */
0x81, 0x02, /* Input (Data, Variable, Absolute) */
0x09, 0x03, /* Usage (Vendor Defined) */
0x75, 0x08, /* Report Size (8) */
0x95, GENERIC_REPORT_SIZE, /* Report Count (GENERIC_REPORT_SIZE) */
0x15, 0x00, /* Logical Minimum (0) */
0x25, 0xff, /* Logical Maximum (255) */
0x91, 0x02, /* Output (Data, Variable, Absolute) */
0xc0 /* End Collection */
/* Use the HID class driver's standard Vendor HID report.
* Vendor Usage Page: 0
* Vendor Collection Usage: 1
* Vendor Report IN Usage: 2
* Vendor Report OUT Usage: 3
* Vendor Report Size: GENERIC_REPORT_SIZE
*/
HID_DESCRIPTOR_VENDOR(0x00, 0x01, 0x02, 0x03, GENERIC_REPORT_SIZE)
};
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
@@ -68,7 +60,7 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -95,7 +87,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -143,7 +135,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | GENERIC_IN_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | GENERIC_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = GENERIC_EPSIZE,
.PollingIntervalMS = 0x01
@@ -154,7 +146,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -165,7 +157,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -176,7 +168,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(21), .Type = DTYPE_String},

6
Micropendous/libs/LUFA/Demos/Device/ClassDriver/GenericHID/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -49,6 +49,8 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Generic HID Interface
USB_Descriptor_Interface_t HID_Interface;
USB_HID_Descriptor_HID_t HID_GenericHID;
USB_Descriptor_Endpoint_t HID_ReportINEndpoint;

49
Micropendous/libs/LUFA/Demos/Device/ClassDriver/GenericHID/GenericHID.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -37,15 +37,7 @@
#include "GenericHID.h"
/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
uint8_t PrevHIDReportBuffer[GENERIC_REPORT_SIZE];
/** Structure to contain reports from the host, so that they can be echoed back upon request */
struct
{
uint8_t ReportID;
uint16_t ReportSize;
uint8_t ReportData[GENERIC_REPORT_SIZE];
} HIDReportEcho;
static uint8_t PrevHIDReportBuffer[GENERIC_REPORT_SIZE];
/** LUFA HID Class driver interface configuration and state information. This structure is
* passed to all HID Class driver functions, so that multiple instances of the same class
@@ -66,6 +58,7 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface =
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
@@ -150,13 +143,16 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
void* ReportData,
uint16_t* const ReportSize)
{
if (HIDReportEcho.ReportID)
*ReportID = HIDReportEcho.ReportID;
uint8_t* Data = (uint8_t*)ReportData;
uint8_t CurrLEDMask = LEDs_GetLEDs();
memcpy(ReportData, HIDReportEcho.ReportData, HIDReportEcho.ReportSize);
Data[0] = ((CurrLEDMask & LEDS_LED1) ? 1 : 0);
Data[1] = ((CurrLEDMask & LEDS_LED2) ? 1 : 0);
Data[2] = ((CurrLEDMask & LEDS_LED3) ? 1 : 0);
Data[3] = ((CurrLEDMask & LEDS_LED4) ? 1 : 0);
*ReportSize = HIDReportEcho.ReportSize;
return true;
*ReportSize = GENERIC_REPORT_SIZE;
return false;
}
/** HID class driver callback function for the processing of HID reports from the host.
@@ -164,7 +160,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
* \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced
* \param[in] ReportID Report ID of the received report from the host
* \param[in] ReportType The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
* \param[in] ReportData Pointer to a buffer where the created report has been stored
* \param[in] ReportData Pointer to a buffer where the received report has been stored
* \param[in] ReportSize Size in bytes of the received HID report
*/
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
@@ -173,8 +169,21 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI
const void* ReportData,
const uint16_t ReportSize)
{
HIDReportEcho.ReportID = ReportID;
HIDReportEcho.ReportSize = ReportSize;
memcpy(HIDReportEcho.ReportData, ReportData, ReportSize);
uint8_t* Data = (uint8_t*)ReportData;
uint8_t NewLEDMask = LEDS_NO_LEDS;
if (Data[0])
NewLEDMask |= LEDS_LED1;
if (Data[1])
NewLEDMask |= LEDS_LED1;
if (Data[2])
NewLEDMask |= LEDS_LED1;
if (Data[3])
NewLEDMask |= LEDS_LED1;
LEDs_SetAllLEDs(NewLEDMask);
}

4
Micropendous/libs/LUFA/Demos/Device/ClassDriver/GenericHID/GenericHID.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted

8
Micropendous/libs/LUFA/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage Generic HID Device
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -15,7 +15,7 @@
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -44,7 +44,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* Generic HID device demonstration application. This gives a simple reference application
* for implementing a generic HID device, using the basic USB HID drivers in all modern
@@ -55,7 +55,7 @@
* When controlled by a custom HID class application, reports can be sent and received by
* both the standard data endpoint and control request methods defined in the HID specification.
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*

37
Micropendous/libs/LUFA/Demos/Device/ClassDriver/GenericHID/makefile
View File

@@ -63,6 +63,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -178,21 +182,21 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -690,13 +694,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -709,5 +722,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
debug gdb-config checksource

53
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Joystick/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -43,34 +43,17 @@
* the device will send, and what it may be sent back from the host. Refer to the HID specification for
* more details on HID report descriptors.
*/
USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] =
const USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] =
{
0x05, 0x01, /* Usage Page (Generic Desktop) */
0x09, 0x04, /* Usage (Joystick) */
0xa1, 0x01, /* Collection (Application) */
0x09, 0x01, /* Usage (Pointer) */
0xa1, 0x00, /* Collection (Physical) */
0x05, 0x01, /* Usage Page (Generic Desktop) */
0x09, 0x30, /* Usage (X) */
0x09, 0x31, /* Usage (Y) */
0x15, 0x9c, /* Logical Minimum (-100) */
0x25, 0x64, /* Logical Maximum (100) */
0x75, 0x08, /* Report Size (8) */
0x95, 0x02, /* Report Count (2) */
0x81, 0x82, /* Input (Data, Variable, Absolute, Volatile) */
0xc0, /* End Collection */
0x05, 0x09, /* Usage Page (Button) */
0x09, 0x02, /* Usage (Button 2) */
0x09, 0x01, /* Usage (Button 1) */
0x15, 0x00, /* Logical Minimum (0) */
0x25, 0x01, /* Logical Maximum (1) */
0x75, 0x01, /* Report Size (1) */
0x95, 0x02, /* Report Count (2) */
0x81, 0x02, /* Input (Data, Variable, Absolute) */
0x75, 0x06, /* Report Size (6) */
0x95, 0x01, /* Report Count (1) */
0x81, 0x01, /* Input (Constant) */
0xc0 /* End Collection */
/* Use the HID class driver's standard Joystick report.
* Number of Axis: 2 (X/Y)
* Min X/Y Axis values: -100
* Max X/Y Axis values: 100
* Min physical X/Y Axis values (used to determine resolution): -1
* Max physical X/Y Axis values (used to determine resolution): 1
* Buttons: 2
*/
HID_DESCRIPTOR_JOYSTICK(2, -100, 100, -1, 1, 2)
};
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
@@ -78,7 +61,7 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] =
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -105,7 +88,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -153,7 +136,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | JOYSTICK_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | JOYSTICK_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = JOYSTICK_EPSIZE,
.PollingIntervalMS = 0x01
@@ -164,7 +147,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -175,7 +158,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -186,7 +169,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},

6
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Joystick/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -49,6 +49,8 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Joystick HID Interface
USB_Descriptor_Interface_t HID_Interface;
USB_HID_Descriptor_HID_t HID_JoystickHID;
USB_Descriptor_Endpoint_t HID_ReportINEndpoint;

11
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Joystick/Joystick.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -37,7 +37,7 @@
#include "Joystick.h"
/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
uint8_t PrevJoystickHIDReportBuffer[sizeof(USB_JoystickReport_Data_t)];
static uint8_t PrevJoystickHIDReportBuffer[sizeof(USB_JoystickReport_Data_t)];
/** LUFA HID Class driver interface configuration and state information. This structure is
* passed to all HID Class driver functions, so that multiple instances of the same class
@@ -58,6 +58,7 @@ USB_ClassInfo_HID_Device_t Joystick_HID_Interface =
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
@@ -160,7 +161,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
JoystickReport->X = 100;
if (JoyStatus_LCL & JOY_PRESS)
JoystickReport->Button = (1 << 1);
JoystickReport->Button |= (1 << 1);
if (ButtonStatus_LCL & BUTTONS_BUTTON1)
JoystickReport->Button |= (1 << 0);
@@ -174,7 +175,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
* \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced
* \param[in] ReportID Report ID of the received report from the host
* \param[in] ReportType The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
* \param[in] ReportData Pointer to a buffer where the created report has been stored
* \param[in] ReportData Pointer to a buffer where the received report has been stored
* \param[in] ReportSize Size in bytes of the received HID report
*/
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,

4
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Joystick/Joystick.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted

8
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Joystick/Joystick.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage Joystick Device Demo
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -15,7 +15,7 @@
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -44,7 +44,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* Joystick demonstration application. This gives a simple reference
* application for implementing a USB Keyboard device, for USB Joysticks
@@ -59,7 +59,7 @@
*
* Currently only single interface joysticks are supported.
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*

37
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Joystick/makefile
View File

@@ -63,6 +63,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -178,21 +182,21 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -690,13 +694,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -709,5 +722,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
debug gdb-config checksource

54
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Keyboard/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -43,40 +43,12 @@
* the device will send, and what it may be sent back from the host. Refer to the HID specification for
* more details on HID report descriptors.
*/
USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
{
0x05, 0x01, /* Usage Page (Generic Desktop) */
0x09, 0x06, /* Usage (Keyboard) */
0xa1, 0x01, /* Collection (Application) */
0x75, 0x01, /* Report Size (1) */
0x95, 0x08, /* Report Count (8) */
0x05, 0x07, /* Usage Page (Key Codes) */
0x19, 0xe0, /* Usage Minimum (Keyboard LeftControl) */
0x29, 0xe7, /* Usage Maximum (Keyboard Right GUI) */
0x15, 0x00, /* Logical Minimum (0) */
0x25, 0x01, /* Logical Maximum (1) */
0x81, 0x02, /* Input (Data, Variable, Absolute) */
0x95, 0x01, /* Report Count (1) */
0x75, 0x08, /* Report Size (8) */
0x81, 0x03, /* Input (Const, Variable, Absolute) */
0x95, 0x05, /* Report Count (5) */
0x75, 0x01, /* Report Size (1) */
0x05, 0x08, /* Usage Page (LEDs) */
0x19, 0x01, /* Usage Minimum (Num Lock) */
0x29, 0x05, /* Usage Maximum (Kana) */
0x91, 0x02, /* Output (Data, Variable, Absolute) */
0x95, 0x01, /* Report Count (1) */
0x75, 0x03, /* Report Size (3) */
0x91, 0x03, /* Output (Const, Variable, Absolute) */
0x95, 0x06, /* Report Count (6) */
0x75, 0x08, /* Report Size (8) */
0x15, 0x00, /* Logical Minimum (0) */
0x25, 0x65, /* Logical Maximum (101) */
0x05, 0x07, /* Usage Page (Keyboard) */
0x19, 0x00, /* Usage Minimum (Reserved (no event indicated)) */
0x29, 0x65, /* Usage Maximum (Keyboard Application) */
0x81, 0x00, /* Input (Data, Array, Absolute) */
0xc0 /* End Collection */
/* Use the HID class driver's standard Keyboard report.
* Max simultaneous keys: 6
*/
HID_DESCRIPTOR_KEYBOARD(6)
};
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
@@ -84,7 +56,7 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -111,7 +83,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -159,7 +131,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = KEYBOARD_EPSIZE,
.PollingIntervalMS = 0x01
@@ -170,7 +142,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -181,7 +153,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -192,7 +164,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},

8
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Keyboard/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -49,6 +49,8 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Keyboard HID Interface
USB_Descriptor_Interface_t HID_Interface;
USB_HID_Descriptor_HID_t HID_KeyboardHID;
USB_Descriptor_Endpoint_t HID_ReportINEndpoint;
@@ -58,7 +60,7 @@
/** Endpoint number of the Keyboard HID reporting IN endpoint. */
#define KEYBOARD_EPNUM 1
/** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */
/** Size in bytes of the Keyboard HID reporting IN endpoint. */
#define KEYBOARD_EPSIZE 8
/* Function Prototypes: */

16
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Keyboard/Keyboard.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -37,7 +37,7 @@
#include "Keyboard.h"
/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
/** LUFA HID Class driver interface configuration and state information. This structure is
* passed to all HID Class driver functions, so that multiple instances of the same class
@@ -58,6 +58,7 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
@@ -138,8 +139,11 @@ void EVENT_USB_Device_StartOfFrame(void)
*
* \return Boolean true to force the sending of the report, false to let the library determine if it needs to be sent
*/
bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, uint8_t* const ReportID,
const uint8_t ReportType, void* ReportData, uint16_t* const ReportSize)
bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
uint8_t* const ReportID,
const uint8_t ReportType,
void* ReportData,
uint16_t* const ReportSize)
{
USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
@@ -176,7 +180,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
* \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced
* \param[in] ReportID Report ID of the received report from the host
* \param[in] ReportType The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
* \param[in] ReportData Pointer to a buffer where the created report has been stored
* \param[in] ReportData Pointer to a buffer where the received report has been stored
* \param[in] ReportSize Size in bytes of the received HID report
*/
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,

4
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Keyboard/Keyboard.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted

8
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage Keyboard Device Demo
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -15,7 +15,7 @@
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -44,7 +44,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* Keyboard demonstration application. This gives a simple reference application
* for implementing a USB Keyboard using the basic USB HID drivers in all modern
@@ -58,7 +58,7 @@
* other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses
* inside the same report to the host.
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*

38
Micropendous/libs/LUFA/Demos/Device/ClassDriver/Keyboard/makefile
View File

@@ -63,6 +63,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -178,21 +182,21 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -690,13 +694,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -709,5 +722,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
debug gdb-config checksource

94
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -45,71 +45,26 @@
*
* This descriptor describes the mouse HID interface's report structure.
*/
USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
{
0x05, 0x01, /* Usage Page (Generic Desktop) */
0x09, 0x02, /* Usage (Mouse) */
0xA1, 0x01, /* Collection (Application) */
0x09, 0x01, /* Usage (Pointer) */
0xA1, 0x00, /* Collection (Physical) */
0x95, 0x03, /* Report Count (3) */
0x75, 0x01, /* Report Size (1) */
0x05, 0x09, /* Usage Page (Button) */
0x19, 0x01, /* Usage Minimum (Button 1) */
0x29, 0x03, /* Usage Maximum (Button 3) */
0x15, 0x00, /* Logical Minimum (0) */
0x25, 0x01, /* Logical Maximum (1) */
0x81, 0x02, /* Input (Data, Variable, Absolute) */
0x95, 0x01, /* Report Count (1) */
0x75, 0x05, /* Report Size (5) */
0x81, 0x01, /* Input (Constant) */
0x75, 0x08, /* Report Size (8) */
0x95, 0x02, /* Report Count (2) */
0x05, 0x01, /* Usage Page (Generic Desktop Control) */
0x09, 0x30, /* Usage X */
0x09, 0x31, /* Usage Y */
0x15, 0x81, /* Logical Minimum (-127) */
0x25, 0x7F, /* Logical Maximum (127) */
0x81, 0x06, /* Input (Data, Variable, Relative) */
0xC0, /* End Collection */
0xC0, /* End Collection */
/* Use the HID class driver's standard Mouse report.
* Min X/Y Axis values: -1
* Max X/Y Axis values: 1
* Min physical X/Y Axis values (used to determine resolution): -1
* Max physical X/Y Axis values (used to determine resolution): 1
* Buttons: 3
* Absolute screen coordinates: false
*/
HID_DESCRIPTOR_MOUSE(-1, 1, -1, 1, 3, false)
};
/** Same as the MouseReport structure, but defines the keyboard HID interface's report structure. */
USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
{
0x05, 0x01, /* Usage Page (Generic Desktop) */
0x09, 0x06, /* Usage (Keyboard) */
0xa1, 0x01, /* Collection (Application) */
0x75, 0x01, /* Report Size (1) */
0x95, 0x08, /* Report Count (8) */
0x05, 0x07, /* Usage Page (Key Codes) */
0x19, 0xe0, /* Usage Minimum (Keyboard LeftControl) */
0x29, 0xe7, /* Usage Maximum (Keyboard Right GUI) */
0x15, 0x00, /* Logical Minimum (0) */
0x25, 0x01, /* Logical Maximum (1) */
0x81, 0x02, /* Input (Data, Variable, Absolute) */
0x95, 0x01, /* Report Count (1) */
0x75, 0x08, /* Report Size (8) */
0x81, 0x03, /* Input (Const, Variable, Absolute) */
0x95, 0x05, /* Report Count (5) */
0x75, 0x01, /* Report Size (1) */
0x05, 0x08, /* Usage Page (LEDs) */
0x19, 0x01, /* Usage Minimum (Num Lock) */
0x29, 0x05, /* Usage Maximum (Kana) */
0x91, 0x02, /* Output (Data, Variable, Absolute) */
0x95, 0x01, /* Report Count (1) */
0x75, 0x03, /* Report Size (3) */
0x91, 0x03, /* Output (Const, Variable, Absolute) */
0x95, 0x06, /* Report Count (6) */
0x75, 0x08, /* Report Size (8) */
0x15, 0x00, /* Logical Minimum (0) */
0x25, 0x65, /* Logical Maximum (101) */
0x05, 0x07, /* Usage Page (Keyboard) */
0x19, 0x00, /* Usage Minimum (Reserved (no event indicated)) */
0x29, 0x65, /* Usage Maximum (Keyboard Application) */
0x81, 0x00, /* Input (Data, Array, Absolute) */
0xC0 /* End Collection */
/* Use the HID class driver's standard Keyboard report.
* Max simultaneous keys: 6
*/
HID_DESCRIPTOR_KEYBOARD(6)
};
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
@@ -117,7 +72,7 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -144,7 +99,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -192,7 +147,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_IN_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = HID_EPSIZE,
.PollingIntervalMS = 0x01
@@ -229,7 +184,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MOUSE_IN_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = HID_EPSIZE,
.PollingIntervalMS = 0x01
@@ -240,7 +195,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -251,7 +206,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -262,7 +217,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(28), .Type = DTYPE_String},
@@ -324,6 +279,7 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
Address = &ConfigurationDescriptor.HID2_MouseHID;
Size = sizeof(USB_HID_Descriptor_HID_t);
}
break;
case HID_DTYPE_Report:
if (!(wIndex))

14
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -49,12 +49,16 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Keyboard HID Interface
USB_Descriptor_Interface_t HID1_KeyboardInterface;
USB_HID_Descriptor_HID_t HID1_KeyboardHID;
USB_Descriptor_Endpoint_t HID1_ReportINEndpoint;
USB_Descriptor_Endpoint_t HID1_ReportINEndpoint;
// Mouse HID Interface
USB_Descriptor_Interface_t HID2_MouseInterface;
USB_HID_Descriptor_HID_t HID2_MouseHID;
USB_Descriptor_Endpoint_t HID2_ReportINEndpoint;
USB_Descriptor_Endpoint_t HID2_ReportINEndpoint;
} USB_Descriptor_Configuration_t;
/* Macros: */
@@ -64,7 +68,7 @@
/** Endpoint number of the Mouse HID reporting IN endpoint. */
#define MOUSE_IN_EPNUM 3
/** Size in bytes of each of the HID reporting IN and OUT endpoints. */
/** Size in bytes of each of the HID reporting IN endpoints. */
#define HID_EPSIZE 8
/* Function Prototypes: */

13
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -37,10 +37,10 @@
#include "KeyboardMouse.h"
/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
/** Buffer to hold the previously generated Mouse HID report, for comparison purposes inside the HID class driver. */
uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)];
static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)];
/** LUFA HID Class driver interface configuration and state information. This structure is
* passed to all HID Class driver functions, so that multiple instances of the same class
@@ -81,6 +81,7 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
@@ -157,7 +158,7 @@ void EVENT_USB_Device_StartOfFrame(void)
/** HID class driver callback function for the creation of HID reports to the host.
*
* \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced
* \param[in,out] ReportID Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
* \param[in,out] ReportID Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
* \param[in] ReportType Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
* \param[out] ReportData Pointer to a buffer where the created report should be stored
* \param[out] ReportSize Number of bytes written in the report (or zero if no report is to be sent
@@ -231,7 +232,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
* \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced
* \param[in] ReportID Report ID of the received report from the host
* \param[in] ReportType The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
* \param[in] ReportData Pointer to a buffer where the created report has been stored
* \param[in] ReportData Pointer to a buffer where the received report has been stored
* \param[in] ReportSize Size in bytes of the received HID report
*/
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,

4
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted

8
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage Dual HID Keyboard and Mouse Device Demo
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -15,7 +15,7 @@
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -44,7 +44,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* Keyboard/Mouse demonstration application. This gives a simple reference
* application for implementing a composite device containing both USB Keyboard
@@ -63,7 +63,7 @@
* joystick to move the pointer, and push the joystick inwards to simulate a
* left-button click.
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*

38
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouse/makefile
View File

@@ -63,6 +63,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -178,21 +182,21 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -690,13 +694,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -709,5 +722,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
debug gdb-config checksource

294
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c Normal file
View File

@@ -0,0 +1,294 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
*/
#include "Descriptors.h"
/** HID class report descriptor. This is a special descriptor constructed with values from the
* USBIF HID class specification to describe the reports and capabilities of the HID device. This
* descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
* the device will send, and what it may be sent back from the host. Refer to the HID specification for
* more details on HID report descriptors.
*
* This descriptor describes the multiple possible reports of the HID interface's report structure.
*/
const USB_Descriptor_HIDReport_Datatype_t PROGMEM HIDReport[] =
{
/* Mouse Report */
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
HID_RI_USAGE(8, 0x02), /* Mouse */
HID_RI_COLLECTION(8, 0x01), /* Application */
HID_RI_REPORT_ID(8, HID_REPORTID_MouseReport),
HID_RI_USAGE(8, 0x01), /* Pointer */
HID_RI_COLLECTION(8, 0x00), /* Physical */
HID_RI_USAGE_PAGE(8, 0x09), /* Button */
HID_RI_USAGE_MINIMUM(8, 0x01),
HID_RI_USAGE_MAXIMUM(8, 0x03),
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
HID_RI_REPORT_COUNT(8, 0x03),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
HID_RI_REPORT_COUNT(8, 0x01),
HID_RI_REPORT_SIZE(8, 0x05),
HID_RI_INPUT(8, HID_IOF_CONSTANT),
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
HID_RI_USAGE(8, 0x30), /* Usage X */
HID_RI_USAGE(8, 0x31), /* Usage Y */
HID_RI_LOGICAL_MINIMUM(8, -1),
HID_RI_LOGICAL_MAXIMUM(8, 1),
HID_RI_PHYSICAL_MINIMUM(8, -1),
HID_RI_PHYSICAL_MAXIMUM(8, 1),
HID_RI_REPORT_COUNT(8, 0x02),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
HID_RI_END_COLLECTION(0),
HID_RI_END_COLLECTION(0),
/* Keyboard Report */
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
HID_RI_USAGE(8, 0x06), /* Keyboard */
HID_RI_COLLECTION(8, 0x01), /* Application */
HID_RI_REPORT_ID(8, HID_REPORTID_KeyboardReport),
HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_REPORT_COUNT(8, 0x08),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
HID_RI_REPORT_COUNT(8, 0x01),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_CONSTANT),
HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
HID_RI_REPORT_COUNT(8, 0x05),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
HID_RI_REPORT_COUNT(8, 0x01),
HID_RI_REPORT_SIZE(8, 0x03),
HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x65),
HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
HID_RI_USAGE_MAXIMUM(8, 0x65), /* Keyboard Application */
HID_RI_REPORT_COUNT(8, 0x06),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
HID_RI_END_COLLECTION(0),
};
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
.Class = USB_CSCP_NoDeviceClass,
.SubClass = USB_CSCP_NoDeviceSubclass,
.Protocol = USB_CSCP_NoDeviceProtocol,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x2066,
.ReleaseNumber = VERSION_BCD(00.01),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
* of the device in one of its supported configurations, including information about any device interfaces
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.HID_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0x00,
.AlternateSetting = 0x00,
.TotalEndpoints = 1,
.Class = HID_CSCP_HIDClass,
.SubClass = HID_CSCP_NonBootSubclass,
.Protocol = HID_CSCP_NonBootProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.HID_HIDData =
{
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
.HIDReportType = HID_DTYPE_Report,
.HIDReportLength = sizeof(HIDReport)
},
.HID_ReportINEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DIR_IN | HID_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = HID_EPSIZE,
.PollingIntervalMS = 0x01
},
};
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(26), .Type = DTYPE_String},
.UnicodeString = L"LUFA Multi HID Report Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
* documentation) by the application code so that the address and size of a requested descriptor can be given
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
{
const uint8_t DescriptorType = (wValue >> 8);
const uint8_t DescriptorNumber = (wValue & 0xFF);
const void* Address = NULL;
uint16_t Size = NO_DESCRIPTOR;
switch (DescriptorType)
{
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
switch (DescriptorNumber)
{
case 0x00:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
case HID_DTYPE_HID:
Address = &ConfigurationDescriptor.HID_HIDData;
Size = sizeof(USB_HID_Descriptor_HID_t);
break;
case HID_DTYPE_Report:
Address = &HIDReport;
Size = sizeof(HIDReport);
break;
}
*DescriptorAddress = Address;
return Size;
}

81
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h Normal file
View File

@@ -0,0 +1,81 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
/* Includes: */
#include <avr/pgmspace.h>
#include <LUFA/Drivers/USB/USB.h>
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
*/
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Combined Keyboard/Mouse HID Interface
USB_Descriptor_Interface_t HID_Interface;
USB_HID_Descriptor_HID_t HID_HIDData;
USB_Descriptor_Endpoint_t HID_ReportINEndpoint;
} USB_Descriptor_Configuration_t;
/* Macros: */
/** Endpoint number of the HID reporting IN endpoint. */
#define HID_IN_EPNUM 1
/** Size in bytes of each of the HID reporting IN endpoint. */
#define HID_EPSIZE 8
/* Enums: */
/** Enum for the HID report IDs used in the device. */
enum
{
HID_REPORTID_MouseReport = 0x01, /**< Report ID for the Mouse report within the device. */
HID_REPORTID_KeyboardReport = 0x02, /**< Report ID for the Keyboard report within the device. */
} HID_Report_IDs;
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

1565
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf Normal file
View File

File diff suppressed because it is too large Load Diff

1
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.aps Normal file
View File

@@ -0,0 +1 @@
<AVRStudio><MANAGEMENT><ProjectName>KeyboardMouseMultiReport</ProjectName><Created>26-Jan-2011 20:01:00</Created><LastEdit>26-Jan-2011 20:01:00</LastEdit><ICON>241</ICON><ProjectType>0</ProjectType><Created>26-Jan-2011 20:01:00</Created><Version>4</Version><Build>4, 18, 0, 685</Build><ProjectTypeName>AVR GCC</ProjectTypeName></MANAGEMENT><CODE_CREATION><ObjectFile></ObjectFile><EntryFile></EntryFile><SaveFolder>C:\Users\Dean\Documents\Electronics\Projects\WORK\LUFAWORK\Demos\Device\ClassDriver\KeyboardMouseMultiReport\</SaveFolder></CODE_CREATION><DEBUG_TARGET><CURRENT_TARGET></CURRENT_TARGET><CURRENT_PART></CURRENT_PART><BREAKPOINTS></BREAKPOINTS><IO_EXPAND><HIDE>false</HIDE></IO_EXPAND><REGISTERNAMES><Register>R00</Register><Register>R01</Register><Register>R02</Register><Register>R03</Register><Register>R04</Register><Register>R05</Register><Register>R06</Register><Register>R07</Register><Register>R08</Register><Register>R09</Register><Register>R10</Register><Register>R11</Register><Register>R12</Register><Register>R13</Register><Register>R14</Register><Register>R15</Register><Register>R16</Register><Register>R17</Register><Register>R18</Register><Register>R19</Register><Register>R20</Register><Register>R21</Register><Register>R22</Register><Register>R23</Register><Register>R24</Register><Register>R25</Register><Register>R26</Register><Register>R27</Register><Register>R28</Register><Register>R29</Register><Register>R30</Register><Register>R31</Register></REGISTERNAMES><COM>Auto</COM><COMType>0</COMType><WATCHNUM>0</WATCHNUM><WATCHNAMES><Pane0></Pane0><Pane1></Pane1><Pane2></Pane2><Pane3></Pane3></WATCHNAMES><BreakOnTrcaeFull>0</BreakOnTrcaeFull></DEBUG_TARGET><Debugger><Triggers></Triggers></Debugger><AVRGCCPLUGIN><FILES><SOURCEFILE>Descriptors.c</SOURCEFILE><SOURCEFILE>KeyboardMouseMultiReport.c</SOURCEFILE><HEADERFILE>Descriptors.h</HEADERFILE><HEADERFILE>KeyboardMouseMultiReport.h</HEADERFILE><OTHERFILE>makefile</OTHERFILE></FILES><CONFIGS><CONFIG><NAME>default</NAME><USESEXTERNALMAKEFILE>YES</USESEXTERNALMAKEFILE><EXTERNALMAKEFILE>makefile</EXTERNALMAKEFILE><PART>atmega128</PART><HEX>1</HEX><LIST>1</LIST><MAP>1</MAP><OUTPUTFILENAME>KeyboardMouseMultiReport.elf</OUTPUTFILENAME><OUTPUTDIR>default\</OUTPUTDIR><ISDIRTY>1</ISDIRTY><OPTIONS/><INCDIRS/><LIBDIRS/><LIBS/><LINKOBJECTS/><OPTIONSFORALL>-Wall -gdwarf-2 -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums</OPTIONSFORALL><LINKEROPTIONS></LINKEROPTIONS><SEGMENTS/></CONFIG></CONFIGS><LASTCONFIG>default</LASTCONFIG><USES_WINAVR>1</USES_WINAVR><GCC_LOC>C:\WinAVR-20100110\bin\avr-gcc.exe</GCC_LOC><MAKE_LOC>C:\WinAVR-20100110\utils\bin\make.exe</MAKE_LOC></AVRGCCPLUGIN><IOView><usergroups/><sort sorted="0" column="0" ordername="0" orderaddress="0" ordergroup="0"/></IOView><Files></Files><Events><Bookmarks></Bookmarks></Events><Trace><Filters></Filters></Trace></AVRStudio>

223
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c Normal file
View File

@@ -0,0 +1,223 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the KeyboardMouseMultiReport demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "KeyboardMouseMultiReport.h"
/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
static uint8_t PrevHIDReportBuffer[MAX(sizeof(USB_KeyboardReport_Data_t), sizeof(USB_MouseReport_Data_t))];
/** LUFA HID Class driver interface configuration and state information. This structure is
* passed to all HID Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another.
*/
USB_ClassInfo_HID_Device_t Device_HID_Interface =
{
.Config =
{
.InterfaceNumber = 0,
.ReportINEndpointNumber = HID_IN_EPNUM,
.ReportINEndpointSize = HID_EPSIZE,
.ReportINEndpointDoubleBank = false,
.PrevReportINBuffer = PrevHIDReportBuffer,
.PrevReportINBufferSize = sizeof(PrevHIDReportBuffer),
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
sei();
for (;;)
{
HID_Device_USBTask(&Device_HID_Interface);
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware()
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
Joystick_Init();
LEDs_Init();
USB_Init();
}
/** Event handler for the library USB Connection event. */
void EVENT_USB_Device_Connect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the library USB Disconnection event. */
void EVENT_USB_Device_Disconnect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
bool ConfigSuccess = true;
ConfigSuccess &= HID_Device_ConfigureEndpoints(&Device_HID_Interface);
USB_Device_EnableSOFEvents();
LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
}
/** Event handler for the library USB Control Request reception event. */
void EVENT_USB_Device_ControlRequest(void)
{
HID_Device_ProcessControlRequest(&Device_HID_Interface);
}
/** Event handler for the USB device Start Of Frame event. */
void EVENT_USB_Device_StartOfFrame(void)
{
HID_Device_MillisecondElapsed(&Device_HID_Interface);
}
/** HID class driver callback function for the creation of HID reports to the host.
*
* \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced
* \param[in,out] ReportID Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
* \param[in] ReportType Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
* \param[out] ReportData Pointer to a buffer where the created report should be stored
* \param[out] ReportSize Number of bytes written in the report (or zero if no report is to be sent
*
* \return Boolean true to force the sending of the report, false to let the library determine if it needs to be sent
*/
bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
uint8_t* const ReportID,
const uint8_t ReportType,
void* ReportData,
uint16_t* const ReportSize)
{
uint8_t JoyStatus_LCL = Joystick_GetStatus();
uint8_t ButtonStatus_LCL = Buttons_GetStatus();
if (!(ButtonStatus_LCL & BUTTONS_BUTTON1))
{
USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
KeyboardReport->Modifier = HID_KEYBOARD_MODIFER_LEFTSHIFT;
if (JoyStatus_LCL & JOY_UP)
KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_A;
else if (JoyStatus_LCL & JOY_DOWN)
KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_B;
if (JoyStatus_LCL & JOY_LEFT)
KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_C;
else if (JoyStatus_LCL & JOY_RIGHT)
KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_D;
if (JoyStatus_LCL & JOY_PRESS)
KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_E;
*ReportID = HID_REPORTID_KeyboardReport;
*ReportSize = sizeof(USB_KeyboardReport_Data_t);
return false;
}
else
{
USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
if (JoyStatus_LCL & JOY_UP)
MouseReport->Y = -1;
else if (JoyStatus_LCL & JOY_DOWN)
MouseReport->Y = 1;
if (JoyStatus_LCL & JOY_LEFT)
MouseReport->X = -1;
else if (JoyStatus_LCL & JOY_RIGHT)
MouseReport->X = 1;
if (JoyStatus_LCL & JOY_PRESS)
MouseReport->Button |= (1 << 0);
*ReportID = HID_REPORTID_MouseReport;
*ReportSize = sizeof(USB_MouseReport_Data_t);
return true;
}
}
/** HID class driver callback function for the processing of HID reports from the host.
*
* \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced
* \param[in] ReportID Report ID of the received report from the host
* \param[in] ReportType The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
* \param[in] ReportData Pointer to a buffer where the received report has been stored
* \param[in] ReportSize Size in bytes of the received HID report
*/
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
const uint8_t ReportID,
const uint8_t ReportType,
const void* ReportData,
const uint16_t ReportSize)
{
uint8_t LEDMask = LEDS_NO_LEDS;
uint8_t* LEDReport = (uint8_t*)ReportData;
if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
LEDMask |= LEDS_LED1;
if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
LEDMask |= LEDS_LED3;
if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
LEDMask |= LEDS_LED4;
LEDs_SetAllLEDs(LEDMask);
}

84
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h Normal file
View File

@@ -0,0 +1,84 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#ifndef _KEYBOARD_MOUSE_H_
#define _KEYBOARD_MOUSE_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#include <string.h>
#include "Descriptors.h"
#include <LUFA/Version.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/USB/USB.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_ControlRequest(void);
void EVENT_USB_Device_StartOfFrame(void);
bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
uint8_t* const ReportID,
const uint8_t ReportType,
void* ReportData,
uint16_t* const ReportSize);
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
const uint8_t ReportID,
const uint8_t ReportType,
const void* ReportData,
const uint16_t ReportSize);
#endif

75
Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt Normal file
View File

@@ -0,0 +1,75 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Multiple Report HID Keyboard and Mouse Device Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* - Series 7 USB AVRs (AT90USBxxx7)
* - Series 6 USB AVRs (AT90USBxxx6)
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification \n
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Keyboard/Mouse demonstration application, using a single HID interface. This gives
* a simple reference application for implementing a multiple HID report device
* containing both USB Keyboard and USB Mouse functionality using the basic USB HID
* drivers in all modern OSes (i.e. no special drivers required). This example uses a
* single HID interface that is shared between the two functions.
*
* On start-up the system will automatically enumerate and function as a keyboard when
* the USB connection to a host is present and the HWB is not pressed. When enabled,
* manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
* documentation for more information on sending keyboard event and key presses.
*
* When the HWB is pressed, the mouse mode is enabled. When enabled, move the joystick
* to move the pointer, and push the joystick inwards to simulate a left-button click.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

142
Micropendous/libs/LUFA/Demos/Device/LowLevel/DualCDC/makefile → Micropendous/libs/LUFA/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile
View File

@@ -63,10 +63,14 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
BOARD = USBKEY
# Processor frequency.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -102,7 +106,7 @@ FORMAT = ihex
# Target file name (without extension).
TARGET = DualCDC
TARGET = KeyboardMouseMultiReport
# Object files directory
@@ -115,28 +119,23 @@ OBJDIR = .
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D USB_DEVICE_ONLY
# LUFA library compile-time options and predefined tokens
LUFA_OPTS = -D USB_DEVICE_ONLY
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# Create the LUFA source path variables by including the LUFA root makefile
include $(LUFA_PATH)/LUFA/makefile
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
Descriptors.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_SRC_USB) \
$(LUFA_SRC_USBCLASS)
# List C++ source files here. (C dependencies are automatically generated.)
@@ -178,19 +177,27 @@ EXTRAINCDIRS = $(LUFA_PATH)/
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -212,10 +219,12 @@ CFLAGS += -ffunction-sections
CFLAGS += -fno-inline-small-functions
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -fno-strict-aliasing
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -mshort-calls
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wundef
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
@@ -239,7 +248,7 @@ CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
CPPFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
@@ -316,7 +325,7 @@ EXTMEMOPTS =
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
@@ -328,9 +337,7 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Programming hardware
# Type: avrdude -c ?
# to get a full listing.
#
@@ -410,6 +417,7 @@ REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
@@ -455,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
all: begin gccversion sizebefore build sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -490,6 +498,7 @@ ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
@@ -498,32 +507,6 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
$(LUFA_PATH)/LUFA/LUFA_Events.lst:
@make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
@echo
@echo Checking for invalid events...
@$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
@sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
@if test -s InvalidEvents.tmp; then exit 1; fi
showliboptions:
@echo
@echo ---- Compile Time Library Options ----
@for i in $(LUFA_OPTS:-D%=%); do \
echo $$i; \
done
@echo --------------------------------------
showtarget:
@echo
@echo --------- Target Information ---------
@echo AVR Model: $(MCU)
@echo Board: $(BOARD)
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
@echo --------------------------------------
# Display compiler version information.
@@ -542,7 +525,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) flash $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -553,7 +536,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
dfu-programmer $(MCU) reset
@@ -614,7 +597,7 @@ extcoff: $(TARGET).elf
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
%.eep: %.elf
@echo
@@ -626,7 +609,7 @@ extcoff: $(TARGET).elf
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
$(OBJDUMP) -h -S -z $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@@ -691,36 +674,42 @@ $(OBJDIR)/%.o : %.S
# Target: clean project.
clean: begin clean_list clean_binary end
clean: begin clean_list end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
clean_list :
@echo
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).hex
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVE) InvalidEvents.tmp
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -730,8 +719,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
.PHONY : all checkinvalidevents showliboptions \
showtarget begin finish end sizebefore sizeafter \
gccversion build elf hex eep lss sym coff extcoff \
program dfu flip flip-ee dfu-ee clean debug \
clean_list clean_binary gdb-config doxygen
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config checksource

18
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MIDI/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -42,7 +42,7 @@
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -69,7 +69,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -199,7 +199,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | MIDI_STREAM_OUT_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
.PollingIntervalMS = 0x01
@@ -224,7 +224,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MIDI_STREAM_IN_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
.PollingIntervalMS = 0x01
@@ -248,7 +248,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -259,7 +259,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -270,7 +270,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(14), .Type = DTYPE_String},

8
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MIDI/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -59,8 +59,12 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// MIDI Audio Control Interface
USB_Descriptor_Interface_t Audio_ControlInterface;
USB_Audio_Descriptor_Interface_AC_t Audio_ControlInterface_SPC;
// MIDI Audio Streaming Interface
USB_Descriptor_Interface_t Audio_StreamInterface;
USB_MIDI_Descriptor_AudioInterface_AS_t Audio_StreamInterface_SPC;
USB_MIDI_Descriptor_InputJack_t MIDI_In_Jack_Emb;

5
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MIDI/MIDI.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -56,6 +56,7 @@ USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface =
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/

6
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MIDI/MIDI.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -30,7 +30,7 @@
/** \file
*
* Header file for AudioOutput.c.
* Header file for MIDI.c.
*/
#ifndef _AUDIO_OUTPUT_H_

8
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MIDI/MIDI.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage MIDI Input Device Demo
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -15,7 +15,7 @@
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -44,7 +44,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* MIDI demonstration application. This gives a simple reference
* application for implementing the USB-MIDI class in USB devices.
@@ -60,7 +60,7 @@
* This device implements MIDI-THRU mode, with the IN MIDI data being
* generated by the device itself. OUT MIDI data is discarded.
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*

38
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MIDI/makefile
View File

@@ -63,6 +63,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -178,21 +182,21 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -690,13 +694,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -709,5 +722,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
debug gdb-config checksource

18
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -54,7 +54,7 @@
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -81,7 +81,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -118,7 +118,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MASS_STORAGE_IN_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MASS_STORAGE_IO_EPSIZE,
.PollingIntervalMS = 0x01
@@ -128,7 +128,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | MASS_STORAGE_OUT_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MASS_STORAGE_IO_EPSIZE,
.PollingIntervalMS = 0x01
@@ -139,7 +139,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -150,7 +150,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -161,7 +161,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(22), .Type = DTYPE_String},

6
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -59,6 +59,8 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Mass Storage Interface
USB_Descriptor_Interface_t MS_Interface;
USB_Descriptor_Endpoint_t MS_DataInEndpoint;
USB_Descriptor_Endpoint_t MS_DataOutEndpoint;

74
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -129,22 +129,22 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
}
/* Write one 16-byte chunk of data to the Dataflash */
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
@@ -157,7 +157,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
return;
}
/* Decrement the blocks remaining counter and reset the sub block counter */
/* Decrement the blocks remaining counter */
TotalBlocks--;
}
@@ -244,22 +244,22 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
}
/* Read one 16-byte chunk of data from the Dataflash */
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
@@ -356,7 +356,7 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
/* Send the Dataflash buffer write command */
Dataflash_ToggleSelectedChipCS();
Dataflash_SendByte(DF_CMD_BUFF1WRITE);
Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
Dataflash_SendAddressBytes(0, 0);
}
@@ -371,7 +371,7 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
BytesInBlockDiv16++;
}
/* Decrement the blocks remaining counter and reset the sub block counter */
/* Decrement the blocks remaining counter */
TotalBlocks--;
}

4
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted

64
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -41,7 +41,7 @@
/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
* features and capabilities.
*/
SCSI_Inquiry_Response_t InquiryData =
static const SCSI_Inquiry_Response_t InquiryData =
{
.DeviceType = DEVICE_TYPE_BLOCK,
.PeripheralQualifier = 0,
@@ -73,7 +73,7 @@ SCSI_Inquiry_Response_t InquiryData =
/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
* command is issued. This gives information on exactly why the last command failed to complete.
*/
SCSI_Request_Sense_Response_t SenseData =
static SCSI_Request_Sense_Response_t SenseData =
{
.ResponseCode = 0x70,
.AdditionalLength = 0x0A,
@@ -113,6 +113,9 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
case SCSI_CMD_READ_10:
CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
break;
case SCSI_CMD_MODE_SENSE_6:
CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
break;
case SCSI_CMD_TEST_UNIT_READY:
case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
case SCSI_CMD_VERIFY_10:
@@ -151,8 +154,7 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
{
uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
uint16_t BytesTransferred = (AllocationLength < sizeof(InquiryData))? AllocationLength :
sizeof(InquiryData);
uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData));
/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
@@ -166,12 +168,10 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
return false;
}
Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NO_STREAM_CALLBACK);
uint8_t PadBytes[AllocationLength - BytesTransferred];
Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
/* Pad out remaining bytes with 0x00 */
Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), NO_STREAM_CALLBACK);
Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
@@ -192,12 +192,10 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
{
uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData);
uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
uint8_t PadBytes[AllocationLength - BytesTransferred];
Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NO_STREAM_CALLBACK);
Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), NO_STREAM_CALLBACK);
Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
Endpoint_ClearIN();
/* Succeed the command and update the bytes transferred counter */
@@ -218,8 +216,8 @@ static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInt
uint32_t LastBlockAddressInLUN = (LUN_MEDIA_BLOCKS - 1);
uint32_t MediaBlockSize = VIRTUAL_MEMORY_BLOCK_SIZE;
Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NO_STREAM_CALLBACK);
Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NO_STREAM_CALLBACK);
Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
Endpoint_ClearIN();
/* Succeed the command and update the bytes transferred counter */
@@ -281,6 +279,17 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
uint32_t BlockAddress;
uint16_t TotalBlocks;
/* Check if the disk is write protected or not */
if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
{
/* Block address is invalid, update SENSE key and return command fail */
SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
SCSI_ASENSE_WRITE_PROTECTED,
SCSI_ASENSEQ_NO_QUALIFIER);
return false;
}
/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
@@ -315,3 +324,24 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
return true;
}
/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
* the SCSI device, as well as the device's Write Protect status.
*
* \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with
*
* \return Boolean true if the command completed successfully, false otherwise.
*/
static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
{
/* Send an empty header response with the Write Protect flag status */
Endpoint_Write_8(0x00);
Endpoint_Write_8(0x00);
Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
Endpoint_Write_8(0x00);
Endpoint_ClearIN();
/* Update the bytes transferred counter and succeed the command */
MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
return true;
}

5
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -81,6 +81,7 @@
static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
const bool IsDataRead);
static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
#endif
#endif

5
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/MassStorage.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -58,6 +58,7 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface =
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/

7
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/MassStorage.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -74,6 +74,9 @@
/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
#define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
/** Indicates if the disk is write protected or not. */
#define DISK_READ_ONLY false
/* Function Prototypes: */
void SetupHardware(void);

29
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
View File

@@ -6,7 +6,7 @@
/** \mainpage Mass Storage Device Demo
*
* \section SSec_Compat Demo Compatibility:
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -15,7 +15,7 @@
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -45,26 +45,25 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* Dual LUN Mass Storage demonstration application. This gives a simple
* reference application for implementing a multiple LUN USB Mass Storage
* device using the basic USB UFI drivers in all modern OSes (i.e. no
* special drivers required).
* Mass Storage device demonstration application. This gives a simple
* reference application for implementing a USB Mass Storage device using
* the basic USB UFI drivers in all modern OSes (i.e. no special drivers
* required).
*
* On start-up the system will automatically enumerate and function as an
* external mass storage device with two LUNs (separate disks) which may
* be formatted and used in the same manner as commercial USB Mass Storage
* devices.
* external mass storage device which may be formatted and used in the same
* manner as commercial USB Mass Storage devices.
*
* You will need to format the mass storage drives upon first run of this
* You will need to format the mass storage drive upon first run of this
* demonstration - as the device acts only as a data block transport between
* the host and the storage media, it does not matter what file system is used,
* as the data interpretation is performed by the host and not the USB device.
*
* This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
* value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
* 255), with each LUN being allocated an equal portion of the available
* This demo is not restricted to only a single LUN (logical disk); by changing
* the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
* (from 1 to 255), with each LUN being allocated an equal portion of the available
* Dataflash memory.
*
* The USB control endpoint is managed entirely by the library using endpoint
@@ -72,7 +71,7 @@
* the host to reset the Mass Storage device state during long transfers without
* the need for complicated polling logic.
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*

38
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorage/makefile
View File

@@ -63,6 +63,10 @@
MCU = at90usb1287
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
@@ -75,8 +79,8 @@ BOARD = USBKEY
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
@@ -84,7 +88,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
@@ -181,21 +185,21 @@ CSTANDARD = -std=c99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += -DF_CLOCK=$(F_CLOCK)UL
CDEFS += -DBOARD=BOARD_$(BOARD)
CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
ADEFS += -DF_CLOCK=$(F_CLOCK)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
@@ -693,13 +697,22 @@ clean_list :
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@echo Generating Project Documentation \($(TARGET)\)...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
checksource:
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
if [ -f $$f ]; then \
echo "Found Source File: $$f" ; \
else \
echo "Source File Not Found: $$f" ; \
fi; done
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -712,5 +725,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
debug gdb-config checksource

58
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
Permission to use, copy, modify, distribute, and sell this
@@ -56,40 +56,12 @@
* the device will send, and what it may be sent back from the host. Refer to the HID specification for
* more details on HID report descriptors.
*/
USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
{
0x05, 0x01, /* Usage Page (Generic Desktop) */
0x09, 0x06, /* Usage (Keyboard) */
0xa1, 0x01, /* Collection (Application) */
0x75, 0x01, /* Report Size (1) */
0x95, 0x08, /* Report Count (8) */
0x05, 0x07, /* Usage Page (Key Codes) */
0x19, 0xe0, /* Usage Minimum (Keyboard LeftControl) */
0x29, 0xe7, /* Usage Maximum (Keyboard Right GUI) */
0x15, 0x00, /* Logical Minimum (0) */
0x25, 0x01, /* Logical Maximum (1) */
0x81, 0x02, /* Input (Data, Variable, Absolute) */
0x95, 0x01, /* Report Count (1) */
0x75, 0x08, /* Report Size (8) */
0x81, 0x03, /* Input (Const, Variable, Absolute) */
0x95, 0x05, /* Report Count (5) */
0x75, 0x01, /* Report Size (1) */
0x05, 0x08, /* Usage Page (LEDs) */
0x19, 0x01, /* Usage Minimum (Num Lock) */
0x29, 0x05, /* Usage Maximum (Kana) */
0x91, 0x02, /* Output (Data, Variable, Absolute) */
0x95, 0x01, /* Report Count (1) */
0x75, 0x03, /* Report Size (3) */
0x91, 0x03, /* Output (Const, Variable, Absolute) */
0x95, 0x06, /* Report Count (6) */
0x75, 0x08, /* Report Size (8) */
0x15, 0x00, /* Logical Minimum (0) */
0x25, 0x65, /* Logical Maximum (101) */
0x05, 0x07, /* Usage Page (Keyboard) */
0x19, 0x00, /* Usage Minimum (Reserved (no event indicated)) */
0x29, 0x65, /* Usage Maximum (Keyboard Application) */
0x81, 0x00, /* Input (Data, Array, Absolute) */
0xc0 /* End Collection */
/* Use the HID class driver's standard Keyboard report.
* Max simultaneous keys: 6
*/
HID_DESCRIPTOR_KEYBOARD(6)
};
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
@@ -97,7 +69,7 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
@@ -124,7 +96,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
@@ -161,7 +133,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MASS_STORAGE_IN_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MASS_STORAGE_IO_EPSIZE,
.PollingIntervalMS = 0x01
@@ -171,7 +143,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | MASS_STORAGE_OUT_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MASS_STORAGE_IO_EPSIZE,
.PollingIntervalMS = 0x01
@@ -208,7 +180,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
.EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = KEYBOARD_EPSIZE,
.PollingIntervalMS = 0x01
@@ -219,7 +191,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
USB_Descriptor_String_t PROGMEM LanguageString =
const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
@@ -230,7 +202,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
@@ -241,7 +213,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
USB_Descriptor_String_t PROGMEM ProductString =
const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(35), .Type = DTYPE_String},

10
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
Permission to use, copy, modify, distribute, and sell this
@@ -46,7 +46,7 @@
/** Endpoint number of the Keyboard HID reporting IN endpoint. */
#define KEYBOARD_EPNUM 1
/** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */
/** Size in bytes of the Keyboard HID reporting IN endpoint. */
#define KEYBOARD_EPSIZE 8
/** Endpoint number of the Mass Storage device-to-host data IN endpoint. */
@@ -66,9 +66,13 @@
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Mass Storage Interface
USB_Descriptor_Interface_t MS_Interface;
USB_Descriptor_Endpoint_t MS_DataInEndpoint;
USB_Descriptor_Endpoint_t MS_DataOutEndpoint;
// Generic HID Interface
USB_Descriptor_Interface_t HID_KeyboardInterface;
USB_HID_Descriptor_HID_t HID_KeyboardHID;
USB_Descriptor_Endpoint_t HID_ReportINEndpoint;

74
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -129,22 +129,22 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
}
/* Write one 16-byte chunk of data to the Dataflash */
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
Dataflash_SendByte(Endpoint_Read_8());
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
@@ -157,7 +157,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
return;
}
/* Decrement the blocks remaining counter and reset the sub block counter */
/* Decrement the blocks remaining counter */
TotalBlocks--;
}
@@ -244,22 +244,22 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
}
/* Read one 16-byte chunk of data from the Dataflash */
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
Endpoint_Write_8(Dataflash_ReceiveByte());
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
@@ -356,7 +356,7 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
/* Send the Dataflash buffer write command */
Dataflash_ToggleSelectedChipCS();
Dataflash_SendByte(DF_CMD_BUFF1WRITE);
Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
Dataflash_SendAddressBytes(0, 0);
}
@@ -371,7 +371,7 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
BytesInBlockDiv16++;
}
/* Decrement the blocks remaining counter and reset the sub block counter */
/* Decrement the blocks remaining counter */
TotalBlocks--;
}

10
Micropendous/libs/LUFA/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h
View File

@@ -1,13 +1,13 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
Copyright (C) Dean Camera, 2011.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -63,12 +63,6 @@
/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */
#define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
/** Total number of logical drives within the device - must be non-zero. */
#define TOTAL_LUNS 1
/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
#define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
/* Function Prototypes: */
void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
const uint32_t BlockAddress,

Some files were not shown because too many files have changed in this diff Show More