AndroidAccessoryHost now works with parsed EPs (wrong configuration was selected). Added VirtualSerial to customized firmware.
This commit is contained in:
opendous
@@ -98,10 +98,8 @@ void AndroidHost_Task(void)
|
|||||||
Pipe_Unfreeze();
|
Pipe_Unfreeze();
|
||||||
|
|
||||||
if (!Sent_EP_Addresses) {
|
if (!Sent_EP_Addresses) {
|
||||||
puts_P(PSTR(ESC_FG_YELLOW "Forcing Addresses 0x85 and 0x07 as parsed addresses are wrong:\r\n" ESC_FG_WHITE));
|
printf_P(PSTR(ESC_FG_YELLOW "\r\nParsed EP IN Address = 0x%02X\r\n" ESC_FG_WHITE), (uint8_t)ADK_IN_EP_Address);
|
||||||
printf_P(PSTR(ESC_FG_YELLOW "Parsed EP IN Address = 0x%02X\r\n" ESC_FG_WHITE), (uint8_t)ADK_IN_EP_Address);
|
|
||||||
printf_P(PSTR(ESC_FG_YELLOW "Parsed EP OUT Address = 0x%02X\r\n" ESC_FG_WHITE), (uint8_t)ADK_OUT_EP_Address);
|
printf_P(PSTR(ESC_FG_YELLOW "Parsed EP OUT Address = 0x%02X\r\n" ESC_FG_WHITE), (uint8_t)ADK_OUT_EP_Address);
|
||||||
printf_P(PSTR(ESC_FG_YELLOW "Bound EP IN Address = 0x%02X\r\n" ESC_FG_WHITE), (uint8_t)Pipe_GetBoundEndpointAddress());
|
|
||||||
Sent_EP_Addresses = 1;
|
Sent_EP_Addresses = 1;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
@@ -40,7 +40,6 @@
|
|||||||
#include <avr/io.h>
|
#include <avr/io.h>
|
||||||
#include <avr/wdt.h>
|
#include <avr/wdt.h>
|
||||||
#include <avr/pgmspace.h>
|
#include <avr/pgmspace.h>
|
||||||
#include <avr/power.h>
|
|
||||||
#include <avr/interrupt.h>
|
#include <avr/interrupt.h>
|
||||||
#include <stdio.h>
|
#include <stdio.h>
|
||||||
|
|
||||||
|
|||||||
@@ -97,18 +97,14 @@ uint8_t ProcessConfigurationDescriptor(void)
|
|||||||
}
|
}
|
||||||
|
|
||||||
/* Configure the Android Accessory data IN pipe */
|
/* Configure the Android Accessory data IN pipe */
|
||||||
// Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
|
Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
|
||||||
// DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
|
DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
|
||||||
// TODO: For some reason the EP address gets set to 0x8B --> EP 11, which does not exist
|
|
||||||
Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, 0x85, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
|
|
||||||
|
|
||||||
ADK_IN_EP_Address = (uint8_t)(DataINEndpoint->EndpointAddress);
|
ADK_IN_EP_Address = (uint8_t)(DataINEndpoint->EndpointAddress);
|
||||||
|
|
||||||
/* Configure the Android Accessory data OUT pipe */
|
/* Configure the Android Accessory data OUT pipe */
|
||||||
// Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
|
Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
|
||||||
// DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
|
DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
|
||||||
// TODO: For some reason the EP address gets set to 0x0D --> EP 13, which does not exist
|
|
||||||
Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, 0x07, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
|
|
||||||
|
|
||||||
ADK_OUT_EP_Address = (uint8_t)(DataOUTEndpoint->EndpointAddress);
|
ADK_OUT_EP_Address = (uint8_t)(DataOUTEndpoint->EndpointAddress);
|
||||||
|
|
||||||
|
|||||||
@@ -44,8 +44,8 @@
|
|||||||
#define ANDROID_DATA_OUT_PIPE 2
|
#define ANDROID_DATA_OUT_PIPE 2
|
||||||
|
|
||||||
#define ANDROID_INTERFACE_CLASS 0xFF
|
#define ANDROID_INTERFACE_CLASS 0xFF
|
||||||
#define ANDROID_INTERFACE_SUBCLASS 0x42
|
#define ANDROID_INTERFACE_SUBCLASS 0xFF
|
||||||
#define ANDROID_INTERFACE_PROTOCOL 0x01
|
#define ANDROID_INTERFACE_PROTOCOL 0x00
|
||||||
|
|
||||||
/* Enums: */
|
/* Enums: */
|
||||||
/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
|
/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
|
||||||
|
|||||||
@@ -89,7 +89,6 @@ void SetupHardware(void)
|
|||||||
Board_Init(); // initialize LEDs and Buttons and any other peripherals
|
Board_Init(); // initialize LEDs and Buttons and any other peripherals
|
||||||
DISABLE_VOLTAGE_TXRX;
|
DISABLE_VOLTAGE_TXRX;
|
||||||
DISABLE_EXT_SRAM;
|
DISABLE_EXT_SRAM;
|
||||||
SELECT_USB_A;
|
|
||||||
USB_Init();
|
USB_Init();
|
||||||
SELECT_USB_A; // The Hosted USB FLASH Drive is connected via the USB-A connector
|
SELECT_USB_A; // The Hosted USB FLASH Drive is connected via the USB-A connector
|
||||||
|
|
||||||
|
|||||||
271
Micropendous/Firmware/VirtualSerial/Descriptors.c
Normal file
271
Micropendous/Firmware/VirtualSerial/Descriptors.c
Normal file
@@ -0,0 +1,271 @@
|
|||||||
|
/*
|
||||||
|
LUFA Library
|
||||||
|
Copyright (C) Dean Camera, 2011.
|
||||||
|
|
||||||
|
dean [at] fourwalledcubicle [dot] com
|
||||||
|
www.lufa-lib.org
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||||
|
|
||||||
|
Permission to use, copy, modify, distribute, and sell this
|
||||||
|
software and its documentation for any purpose is hereby granted
|
||||||
|
without fee, provided that the above copyright notice appear in
|
||||||
|
all copies and that both that the copyright notice and this
|
||||||
|
permission notice and warranty disclaimer appear in supporting
|
||||||
|
documentation, and that the name of the author not be used in
|
||||||
|
advertising or publicity pertaining to distribution of the
|
||||||
|
software without specific, written prior permission.
|
||||||
|
|
||||||
|
The author disclaim all warranties with regard to this
|
||||||
|
software, including all implied warranties of merchantability
|
||||||
|
and fitness. In no event shall the author be liable for any
|
||||||
|
special, indirect or consequential damages or any damages
|
||||||
|
whatsoever resulting from loss of use, data or profits, whether
|
||||||
|
in an action of contract, negligence or other tortious action,
|
||||||
|
arising out of or in connection with the use or performance of
|
||||||
|
this software.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** \file
|
||||||
|
*
|
||||||
|
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
|
||||||
|
* computer-readable structures which the host requests upon device enumeration, to determine
|
||||||
|
* the device's capabilities and functions.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "Descriptors.h"
|
||||||
|
|
||||||
|
/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
|
||||||
|
* the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
|
||||||
|
* This allows the host to track a device across insertions on different ports, allowing them to retain allocated
|
||||||
|
* resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
|
||||||
|
* so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
|
||||||
|
* from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
|
||||||
|
* port location).
|
||||||
|
*/
|
||||||
|
#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
|
||||||
|
#warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
|
||||||
|
* device characteristics, including the supported USB version, control endpoint size and the
|
||||||
|
* number of device configurations. The descriptor is read out by the USB host when the enumeration
|
||||||
|
* process begins.
|
||||||
|
*/
|
||||||
|
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
|
||||||
|
|
||||||
|
.USBSpecification = VERSION_BCD(01.10),
|
||||||
|
.Class = CDC_CSCP_CDCClass,
|
||||||
|
.SubClass = CDC_CSCP_NoSpecificSubclass,
|
||||||
|
.Protocol = CDC_CSCP_NoSpecificProtocol,
|
||||||
|
|
||||||
|
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
|
||||||
|
|
||||||
|
.VendorID = 0x03EB,
|
||||||
|
.ProductID = 0x2044,
|
||||||
|
.ReleaseNumber = VERSION_BCD(00.01),
|
||||||
|
|
||||||
|
.ManufacturerStrIndex = 0x01,
|
||||||
|
.ProductStrIndex = 0x02,
|
||||||
|
.SerialNumStrIndex = USE_INTERNAL_SERIAL,
|
||||||
|
|
||||||
|
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
|
||||||
|
};
|
||||||
|
|
||||||
|
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
|
||||||
|
* of the device in one of its supported configurations, including information about any device interfaces
|
||||||
|
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
|
||||||
|
* a configuration so that the host may correctly communicate with the USB device.
|
||||||
|
*/
|
||||||
|
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
|
||||||
|
{
|
||||||
|
.Config =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
|
||||||
|
|
||||||
|
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
|
||||||
|
.TotalInterfaces = 2,
|
||||||
|
|
||||||
|
.ConfigurationNumber = 1,
|
||||||
|
.ConfigurationStrIndex = NO_DESCRIPTOR,
|
||||||
|
|
||||||
|
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
|
||||||
|
|
||||||
|
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
|
||||||
|
},
|
||||||
|
|
||||||
|
.CDC_CCI_Interface =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
|
||||||
|
|
||||||
|
.InterfaceNumber = 0,
|
||||||
|
.AlternateSetting = 0,
|
||||||
|
|
||||||
|
.TotalEndpoints = 1,
|
||||||
|
|
||||||
|
.Class = CDC_CSCP_CDCClass,
|
||||||
|
.SubClass = CDC_CSCP_ACMSubclass,
|
||||||
|
.Protocol = CDC_CSCP_ATCommandProtocol,
|
||||||
|
|
||||||
|
.InterfaceStrIndex = NO_DESCRIPTOR
|
||||||
|
},
|
||||||
|
|
||||||
|
.CDC_Functional_Header =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
|
||||||
|
.Subtype = CDC_DSUBTYPE_CSInterface_Header,
|
||||||
|
|
||||||
|
.CDCSpecification = VERSION_BCD(01.10),
|
||||||
|
},
|
||||||
|
|
||||||
|
.CDC_Functional_ACM =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
|
||||||
|
.Subtype = CDC_DSUBTYPE_CSInterface_ACM,
|
||||||
|
|
||||||
|
.Capabilities = 0x06,
|
||||||
|
},
|
||||||
|
|
||||||
|
.CDC_Functional_Union =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
|
||||||
|
.Subtype = CDC_DSUBTYPE_CSInterface_Union,
|
||||||
|
|
||||||
|
.MasterInterfaceNumber = 0,
|
||||||
|
.SlaveInterfaceNumber = 1,
|
||||||
|
},
|
||||||
|
|
||||||
|
.CDC_NotificationEndpoint =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
|
||||||
|
|
||||||
|
.EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM),
|
||||||
|
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
|
||||||
|
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
|
||||||
|
.PollingIntervalMS = 0xFF
|
||||||
|
},
|
||||||
|
|
||||||
|
.CDC_DCI_Interface =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
|
||||||
|
|
||||||
|
.InterfaceNumber = 1,
|
||||||
|
.AlternateSetting = 0,
|
||||||
|
|
||||||
|
.TotalEndpoints = 2,
|
||||||
|
|
||||||
|
.Class = CDC_CSCP_CDCDataClass,
|
||||||
|
.SubClass = CDC_CSCP_NoDataSubclass,
|
||||||
|
.Protocol = CDC_CSCP_NoDataProtocol,
|
||||||
|
|
||||||
|
.InterfaceStrIndex = NO_DESCRIPTOR
|
||||||
|
},
|
||||||
|
|
||||||
|
.CDC_DataOutEndpoint =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
|
||||||
|
|
||||||
|
.EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM),
|
||||||
|
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
|
||||||
|
.EndpointSize = CDC_TXRX_EPSIZE,
|
||||||
|
.PollingIntervalMS = 0x01
|
||||||
|
},
|
||||||
|
|
||||||
|
.CDC_DataInEndpoint =
|
||||||
|
{
|
||||||
|
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
|
||||||
|
|
||||||
|
.EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM),
|
||||||
|
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
|
||||||
|
.EndpointSize = CDC_TXRX_EPSIZE,
|
||||||
|
.PollingIntervalMS = 0x01
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
|
||||||
|
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
|
||||||
|
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
|
||||||
|
*/
|
||||||
|
const USB_Descriptor_String_t PROGMEM LanguageString =
|
||||||
|
{
|
||||||
|
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
|
||||||
|
|
||||||
|
.UnicodeString = {LANGUAGE_ID_ENG}
|
||||||
|
};
|
||||||
|
|
||||||
|
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
|
||||||
|
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
|
||||||
|
* Descriptor.
|
||||||
|
*/
|
||||||
|
const USB_Descriptor_String_t PROGMEM ManufacturerString =
|
||||||
|
{
|
||||||
|
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
|
||||||
|
|
||||||
|
.UnicodeString = L"Dean Camera"
|
||||||
|
};
|
||||||
|
|
||||||
|
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
|
||||||
|
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
|
||||||
|
* Descriptor.
|
||||||
|
*/
|
||||||
|
const USB_Descriptor_String_t PROGMEM ProductString =
|
||||||
|
{
|
||||||
|
.Header = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
|
||||||
|
|
||||||
|
.UnicodeString = L"LUFA CDC Demo"
|
||||||
|
};
|
||||||
|
|
||||||
|
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
|
||||||
|
* documentation) by the application code so that the address and size of a requested descriptor can be given
|
||||||
|
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
|
||||||
|
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
|
||||||
|
* USB host.
|
||||||
|
*/
|
||||||
|
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
|
||||||
|
const uint8_t wIndex,
|
||||||
|
const void** const DescriptorAddress)
|
||||||
|
{
|
||||||
|
const uint8_t DescriptorType = (wValue >> 8);
|
||||||
|
const uint8_t DescriptorNumber = (wValue & 0xFF);
|
||||||
|
|
||||||
|
const void* Address = NULL;
|
||||||
|
uint16_t Size = NO_DESCRIPTOR;
|
||||||
|
|
||||||
|
switch (DescriptorType)
|
||||||
|
{
|
||||||
|
case DTYPE_Device:
|
||||||
|
Address = &DeviceDescriptor;
|
||||||
|
Size = sizeof(USB_Descriptor_Device_t);
|
||||||
|
break;
|
||||||
|
case DTYPE_Configuration:
|
||||||
|
Address = &ConfigurationDescriptor;
|
||||||
|
Size = sizeof(USB_Descriptor_Configuration_t);
|
||||||
|
break;
|
||||||
|
case DTYPE_String:
|
||||||
|
switch (DescriptorNumber)
|
||||||
|
{
|
||||||
|
case 0x00:
|
||||||
|
Address = &LanguageString;
|
||||||
|
Size = pgm_read_byte(&LanguageString.Header.Size);
|
||||||
|
break;
|
||||||
|
case 0x01:
|
||||||
|
Address = &ManufacturerString;
|
||||||
|
Size = pgm_read_byte(&ManufacturerString.Header.Size);
|
||||||
|
break;
|
||||||
|
case 0x02:
|
||||||
|
Address = &ProductString;
|
||||||
|
Size = pgm_read_byte(&ProductString.Header.Size);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
*DescriptorAddress = Address;
|
||||||
|
return Size;
|
||||||
|
}
|
||||||
|
|
||||||
89
Micropendous/Firmware/VirtualSerial/Descriptors.h
Normal file
89
Micropendous/Firmware/VirtualSerial/Descriptors.h
Normal file
@@ -0,0 +1,89 @@
|
|||||||
|
/*
|
||||||
|
LUFA Library
|
||||||
|
Copyright (C) Dean Camera, 2011.
|
||||||
|
|
||||||
|
dean [at] fourwalledcubicle [dot] com
|
||||||
|
www.lufa-lib.org
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||||
|
|
||||||
|
Permission to use, copy, modify, distribute, and sell this
|
||||||
|
software and its documentation for any purpose is hereby granted
|
||||||
|
without fee, provided that the above copyright notice appear in
|
||||||
|
all copies and that both that the copyright notice and this
|
||||||
|
permission notice and warranty disclaimer appear in supporting
|
||||||
|
documentation, and that the name of the author not be used in
|
||||||
|
advertising or publicity pertaining to distribution of the
|
||||||
|
software without specific, written prior permission.
|
||||||
|
|
||||||
|
The author disclaim all warranties with regard to this
|
||||||
|
software, including all implied warranties of merchantability
|
||||||
|
and fitness. In no event shall the author be liable for any
|
||||||
|
special, indirect or consequential damages or any damages
|
||||||
|
whatsoever resulting from loss of use, data or profits, whether
|
||||||
|
in an action of contract, negligence or other tortious action,
|
||||||
|
arising out of or in connection with the use or performance of
|
||||||
|
this software.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** \file
|
||||||
|
*
|
||||||
|
* Header file for Descriptors.c.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _DESCRIPTORS_H_
|
||||||
|
#define _DESCRIPTORS_H_
|
||||||
|
|
||||||
|
/* Includes: */
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
|
||||||
|
#include <LUFA/Drivers/USB/USB.h>
|
||||||
|
|
||||||
|
/* Macros: */
|
||||||
|
/** Endpoint number of the CDC device-to-host notification IN endpoint. */
|
||||||
|
#define CDC_NOTIFICATION_EPNUM 2
|
||||||
|
|
||||||
|
/** Endpoint number of the CDC device-to-host data IN endpoint. */
|
||||||
|
#define CDC_TX_EPNUM 3
|
||||||
|
|
||||||
|
/** Endpoint number of the CDC host-to-device data OUT endpoint. */
|
||||||
|
#define CDC_RX_EPNUM 4
|
||||||
|
|
||||||
|
/** Size in bytes of the CDC device-to-host notification IN endpoint. */
|
||||||
|
#define CDC_NOTIFICATION_EPSIZE 8
|
||||||
|
|
||||||
|
/** Size in bytes of the CDC data IN and OUT endpoints. */
|
||||||
|
#define CDC_TXRX_EPSIZE 16
|
||||||
|
|
||||||
|
/* Type Defines: */
|
||||||
|
/** Type define for the device configuration descriptor structure. This must be defined in the
|
||||||
|
* application code, as the configuration descriptor contains several sub-descriptors which
|
||||||
|
* vary between devices, and which describe the device's usage to the host.
|
||||||
|
*/
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
USB_Descriptor_Configuration_Header_t Config;
|
||||||
|
|
||||||
|
// CDC Control Interface
|
||||||
|
USB_Descriptor_Interface_t CDC_CCI_Interface;
|
||||||
|
USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header;
|
||||||
|
USB_CDC_Descriptor_FunctionalACM_t CDC_Functional_ACM;
|
||||||
|
USB_CDC_Descriptor_FunctionalUnion_t CDC_Functional_Union;
|
||||||
|
USB_Descriptor_Endpoint_t CDC_NotificationEndpoint;
|
||||||
|
|
||||||
|
// CDC Data Interface
|
||||||
|
USB_Descriptor_Interface_t CDC_DCI_Interface;
|
||||||
|
USB_Descriptor_Endpoint_t CDC_DataOutEndpoint;
|
||||||
|
USB_Descriptor_Endpoint_t CDC_DataInEndpoint;
|
||||||
|
} USB_Descriptor_Configuration_t;
|
||||||
|
|
||||||
|
/* Function Prototypes: */
|
||||||
|
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
|
||||||
|
const uint8_t wIndex,
|
||||||
|
const void** const DescriptorAddress)
|
||||||
|
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
1565
Micropendous/Firmware/VirtualSerial/Doxygen.conf
Normal file
1565
Micropendous/Firmware/VirtualSerial/Doxygen.conf
Normal file
File diff suppressed because it is too large
Load Diff
106
Micropendous/Firmware/VirtualSerial/LUFA VirtualSerial.inf
Normal file
106
Micropendous/Firmware/VirtualSerial/LUFA VirtualSerial.inf
Normal file
@@ -0,0 +1,106 @@
|
|||||||
|
;************************************************************
|
||||||
|
; Windows USB CDC ACM Setup File
|
||||||
|
; Copyright (c) 2000 Microsoft Corporation
|
||||||
|
|
||||||
|
|
||||||
|
[Version]
|
||||||
|
Signature="$Windows NT$"
|
||||||
|
Class=Ports
|
||||||
|
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
|
||||||
|
Provider=%MFGNAME%
|
||||||
|
LayoutFile=layout.inf
|
||||||
|
CatalogFile=%MFGFILENAME%.cat
|
||||||
|
DriverVer=11/15/2007,5.1.2600.0
|
||||||
|
|
||||||
|
[Manufacturer]
|
||||||
|
%MFGNAME%=DeviceList, NTamd64
|
||||||
|
|
||||||
|
[DestinationDirs]
|
||||||
|
DefaultDestDir=12
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
; Windows 2000/XP/Vista-32bit Sections
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
[DriverInstall.nt]
|
||||||
|
include=mdmcpq.inf
|
||||||
|
CopyFiles=DriverCopyFiles.nt
|
||||||
|
AddReg=DriverInstall.nt.AddReg
|
||||||
|
|
||||||
|
[DriverCopyFiles.nt]
|
||||||
|
usbser.sys,,,0x20
|
||||||
|
|
||||||
|
[DriverInstall.nt.AddReg]
|
||||||
|
HKR,,DevLoader,,*ntkern
|
||||||
|
HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
|
||||||
|
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
|
||||||
|
|
||||||
|
[DriverInstall.nt.Services]
|
||||||
|
AddService=usbser, 0x00000002, DriverService.nt
|
||||||
|
|
||||||
|
[DriverService.nt]
|
||||||
|
DisplayName=%SERVICE%
|
||||||
|
ServiceType=1
|
||||||
|
StartType=3
|
||||||
|
ErrorControl=1
|
||||||
|
ServiceBinary=%12%\%DRIVERFILENAME%.sys
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
; Vista-64bit Sections
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
[DriverInstall.NTamd64]
|
||||||
|
include=mdmcpq.inf
|
||||||
|
CopyFiles=DriverCopyFiles.NTamd64
|
||||||
|
AddReg=DriverInstall.NTamd64.AddReg
|
||||||
|
|
||||||
|
[DriverCopyFiles.NTamd64]
|
||||||
|
%DRIVERFILENAME%.sys,,,0x20
|
||||||
|
|
||||||
|
[DriverInstall.NTamd64.AddReg]
|
||||||
|
HKR,,DevLoader,,*ntkern
|
||||||
|
HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
|
||||||
|
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
|
||||||
|
|
||||||
|
[DriverInstall.NTamd64.Services]
|
||||||
|
AddService=usbser, 0x00000002, DriverService.NTamd64
|
||||||
|
|
||||||
|
[DriverService.NTamd64]
|
||||||
|
DisplayName=%SERVICE%
|
||||||
|
ServiceType=1
|
||||||
|
StartType=3
|
||||||
|
ErrorControl=1
|
||||||
|
ServiceBinary=%12%\%DRIVERFILENAME%.sys
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
; Vendor and Product ID Definitions
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
; When developing your USB device, the VID and PID used in the PC side
|
||||||
|
; application program and the firmware on the microcontroller must match.
|
||||||
|
; Modify the below line to use your VID and PID. Use the format as shown below.
|
||||||
|
; Note: One INF file can be used for multiple devices with different VID and PIDs.
|
||||||
|
; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
[SourceDisksFiles]
|
||||||
|
[SourceDisksNames]
|
||||||
|
[DeviceList]
|
||||||
|
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
|
||||||
|
|
||||||
|
[DeviceList.NTamd64]
|
||||||
|
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
|
||||||
|
|
||||||
|
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
; String Definitions
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
;Modify these strings to customize your device
|
||||||
|
;------------------------------------------------------------------------------
|
||||||
|
[Strings]
|
||||||
|
MFGFILENAME="CDC_vista"
|
||||||
|
DRIVERFILENAME ="usbser"
|
||||||
|
MFGNAME="http://www.lufa-lib.org"
|
||||||
|
INSTDISK="LUFA CDC Driver Installer"
|
||||||
|
DESCRIPTION="Communications Port"
|
||||||
|
SERVICE="USB RS-232 Emulation Driver"
|
||||||
1
Micropendous/Firmware/VirtualSerial/VirtualSerial.aps
Normal file
1
Micropendous/Firmware/VirtualSerial/VirtualSerial.aps
Normal file
@@ -0,0 +1 @@
|
|||||||
|
<AVRStudio><MANAGEMENT><ProjectName>VirtualSerial</ProjectName><Created>13-Jul-2010 15:37:05</Created><LastEdit>13-Jul-2010 15:37:20</LastEdit><ICON>241</ICON><ProjectType>0</ProjectType><Created>13-Jul-2010 15:37:05</Created><Version>4</Version><Build>4, 18, 0, 685</Build><ProjectTypeName>AVR GCC</ProjectTypeName></MANAGEMENT><CODE_CREATION><ObjectFile></ObjectFile><EntryFile></EntryFile><SaveFolder>C:\Users\Dean\Documents\Electronics\Projects\WORK\LUFAWORK\Demos\Device\ClassDriver\VirtualSerial\</SaveFolder></CODE_CREATION><DEBUG_TARGET><CURRENT_TARGET></CURRENT_TARGET><CURRENT_PART></CURRENT_PART><BREAKPOINTS></BREAKPOINTS><IO_EXPAND><HIDE>false</HIDE></IO_EXPAND><REGISTERNAMES><Register>R00</Register><Register>R01</Register><Register>R02</Register><Register>R03</Register><Register>R04</Register><Register>R05</Register><Register>R06</Register><Register>R07</Register><Register>R08</Register><Register>R09</Register><Register>R10</Register><Register>R11</Register><Register>R12</Register><Register>R13</Register><Register>R14</Register><Register>R15</Register><Register>R16</Register><Register>R17</Register><Register>R18</Register><Register>R19</Register><Register>R20</Register><Register>R21</Register><Register>R22</Register><Register>R23</Register><Register>R24</Register><Register>R25</Register><Register>R26</Register><Register>R27</Register><Register>R28</Register><Register>R29</Register><Register>R30</Register><Register>R31</Register></REGISTERNAMES><COM>Auto</COM><COMType>0</COMType><WATCHNUM>0</WATCHNUM><WATCHNAMES><Pane0></Pane0><Pane1></Pane1><Pane2></Pane2><Pane3></Pane3></WATCHNAMES><BreakOnTrcaeFull>0</BreakOnTrcaeFull></DEBUG_TARGET><Debugger><Triggers></Triggers></Debugger><AVRGCCPLUGIN><FILES><SOURCEFILE>Descriptors.c</SOURCEFILE><SOURCEFILE>VirtualSerial.c</SOURCEFILE><HEADERFILE>Descriptors.h</HEADERFILE><HEADERFILE>VirtualSerial.h</HEADERFILE><OTHERFILE>makefile</OTHERFILE></FILES><CONFIGS><CONFIG><NAME>default</NAME><USESEXTERNALMAKEFILE>YES</USESEXTERNALMAKEFILE><EXTERNALMAKEFILE>makefile</EXTERNALMAKEFILE><PART>atmega128</PART><HEX>1</HEX><LIST>1</LIST><MAP>1</MAP><OUTPUTFILENAME>VirtualSerial.elf</OUTPUTFILENAME><OUTPUTDIR>default\</OUTPUTDIR><ISDIRTY>1</ISDIRTY><OPTIONS/><INCDIRS/><LIBDIRS/><LIBS/><LINKOBJECTS/><OPTIONSFORALL>-Wall -gdwarf-2 -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums</OPTIONSFORALL><LINKEROPTIONS></LINKEROPTIONS><SEGMENTS/></CONFIG></CONFIGS><LASTCONFIG>default</LASTCONFIG><USES_WINAVR>1</USES_WINAVR><GCC_LOC>C:\WinAVR-20100110\bin\avr-gcc.exe</GCC_LOC><MAKE_LOC>C:\WinAVR-20100110\utils\bin\make.exe</MAKE_LOC></AVRGCCPLUGIN><IOView><usergroups/><sort sorted="0" column="0" ordername="0" orderaddress="0" ordergroup="0"/></IOView><Files></Files><Events><Bookmarks></Bookmarks></Events><Trace><Filters></Filters></Trace></AVRStudio>
|
||||||
174
Micropendous/Firmware/VirtualSerial/VirtualSerial.c
Normal file
174
Micropendous/Firmware/VirtualSerial/VirtualSerial.c
Normal file
@@ -0,0 +1,174 @@
|
|||||||
|
/*
|
||||||
|
LUFA Library
|
||||||
|
Copyright (C) Dean Camera, 2011.
|
||||||
|
|
||||||
|
dean [at] fourwalledcubicle [dot] com
|
||||||
|
www.lufa-lib.org
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||||
|
|
||||||
|
Permission to use, copy, modify, distribute, and sell this
|
||||||
|
software and its documentation for any purpose is hereby granted
|
||||||
|
without fee, provided that the above copyright notice appear in
|
||||||
|
all copies and that both that the copyright notice and this
|
||||||
|
permission notice and warranty disclaimer appear in supporting
|
||||||
|
documentation, and that the name of the author not be used in
|
||||||
|
advertising or publicity pertaining to distribution of the
|
||||||
|
software without specific, written prior permission.
|
||||||
|
|
||||||
|
The author disclaim all warranties with regard to this
|
||||||
|
software, including all implied warranties of merchantability
|
||||||
|
and fitness. In no event shall the author be liable for any
|
||||||
|
special, indirect or consequential damages or any damages
|
||||||
|
whatsoever resulting from loss of use, data or profits, whether
|
||||||
|
in an action of contract, negligence or other tortious action,
|
||||||
|
arising out of or in connection with the use or performance of
|
||||||
|
this software.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** \file
|
||||||
|
*
|
||||||
|
* Main source file for the VirtualSerial demo. This file contains the main tasks of
|
||||||
|
* the demo and is responsible for the initial application hardware configuration.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "VirtualSerial.h"
|
||||||
|
|
||||||
|
/** LUFA CDC Class driver interface configuration and state information. This structure is
|
||||||
|
* passed to all CDC Class driver functions, so that multiple instances of the same class
|
||||||
|
* within a device can be differentiated from one another.
|
||||||
|
*/
|
||||||
|
USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
|
||||||
|
{
|
||||||
|
.Config =
|
||||||
|
{
|
||||||
|
.ControlInterfaceNumber = 0,
|
||||||
|
|
||||||
|
.DataINEndpointNumber = CDC_TX_EPNUM,
|
||||||
|
.DataINEndpointSize = CDC_TXRX_EPSIZE,
|
||||||
|
.DataINEndpointDoubleBank = false,
|
||||||
|
|
||||||
|
.DataOUTEndpointNumber = CDC_RX_EPNUM,
|
||||||
|
.DataOUTEndpointSize = CDC_TXRX_EPSIZE,
|
||||||
|
.DataOUTEndpointDoubleBank = false,
|
||||||
|
|
||||||
|
.NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM,
|
||||||
|
.NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE,
|
||||||
|
.NotificationEndpointDoubleBank = false,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
/** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be
|
||||||
|
* used like any regular character stream in the C APIs
|
||||||
|
*/
|
||||||
|
static FILE USBSerialStream;
|
||||||
|
|
||||||
|
|
||||||
|
/** Main program entry point. This routine contains the overall program flow, including initial
|
||||||
|
* setup of all components and the main program loop.
|
||||||
|
*/
|
||||||
|
int main(void)
|
||||||
|
{
|
||||||
|
SetupHardware();
|
||||||
|
|
||||||
|
/* Create a regular character stream for the interface so that it can be used with the stdio.h functions */
|
||||||
|
CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream);
|
||||||
|
|
||||||
|
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
|
||||||
|
sei();
|
||||||
|
|
||||||
|
for (;;)
|
||||||
|
{
|
||||||
|
CheckJoystickMovement();
|
||||||
|
|
||||||
|
/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
|
||||||
|
CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
|
||||||
|
|
||||||
|
CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
|
||||||
|
USB_USBTask();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
||||||
|
void SetupHardware(void)
|
||||||
|
{
|
||||||
|
/* Disable watchdog if enabled by bootloader/fuses */
|
||||||
|
MCUSR &= ~(1 << WDRF);
|
||||||
|
wdt_disable();
|
||||||
|
|
||||||
|
/* Disable clock division */
|
||||||
|
clock_prescale_set(clock_div_1);
|
||||||
|
|
||||||
|
/* Hardware Initialization */
|
||||||
|
Joystick_Init();
|
||||||
|
LEDs_Init();
|
||||||
|
USB_Init();
|
||||||
|
}
|
||||||
|
|
||||||
|
#define BUTTONS_BUTTON1 (1 << 2)
|
||||||
|
|
||||||
|
/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
|
||||||
|
void CheckJoystickMovement(void)
|
||||||
|
{
|
||||||
|
uint8_t JoyStatus_LCL = Joystick_GetStatus();
|
||||||
|
char* ReportString = NULL;
|
||||||
|
static bool ActionSent = false;
|
||||||
|
|
||||||
|
if (JoyStatus_LCL & JOY_UP)
|
||||||
|
ReportString = "Joystick Up\r\n";
|
||||||
|
else if (JoyStatus_LCL & JOY_DOWN)
|
||||||
|
ReportString = "Joystick Down\r\n";
|
||||||
|
else if (JoyStatus_LCL & JOY_LEFT)
|
||||||
|
ReportString = "Joystick Left\r\n";
|
||||||
|
else if (JoyStatus_LCL & JOY_RIGHT)
|
||||||
|
ReportString = "Joystick Right\r\n";
|
||||||
|
else if (JoyStatus_LCL & JOY_PRESS)
|
||||||
|
ReportString = "Joystick Pressed\r\n";
|
||||||
|
else
|
||||||
|
ActionSent = false;
|
||||||
|
|
||||||
|
if (((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1))
|
||||||
|
{
|
||||||
|
DDRE &= ~BUTTONS_BUTTON1;
|
||||||
|
PORTE |= BUTTONS_BUTTON1;
|
||||||
|
|
||||||
|
ActionSent = true;
|
||||||
|
ReportString = "Joystick Pressed\r\n";
|
||||||
|
/* Write the string to the virtual COM port via the created character stream */
|
||||||
|
fputs(ReportString, &USBSerialStream);
|
||||||
|
|
||||||
|
/* Alternatively, without the stream: */
|
||||||
|
// CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/** Event handler for the library USB Connection event. */
|
||||||
|
void EVENT_USB_Device_Connect(void)
|
||||||
|
{
|
||||||
|
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
|
||||||
|
}
|
||||||
|
|
||||||
|
/** Event handler for the library USB Disconnection event. */
|
||||||
|
void EVENT_USB_Device_Disconnect(void)
|
||||||
|
{
|
||||||
|
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
|
||||||
|
}
|
||||||
|
|
||||||
|
/** Event handler for the library USB Configuration Changed event. */
|
||||||
|
void EVENT_USB_Device_ConfigurationChanged(void)
|
||||||
|
{
|
||||||
|
bool ConfigSuccess = true;
|
||||||
|
|
||||||
|
ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
|
||||||
|
|
||||||
|
LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
|
||||||
|
}
|
||||||
|
|
||||||
|
/** Event handler for the library USB Control Request reception event. */
|
||||||
|
void EVENT_USB_Device_ControlRequest(void)
|
||||||
|
{
|
||||||
|
CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
|
||||||
|
}
|
||||||
|
|
||||||
77
Micropendous/Firmware/VirtualSerial/VirtualSerial.h
Normal file
77
Micropendous/Firmware/VirtualSerial/VirtualSerial.h
Normal file
@@ -0,0 +1,77 @@
|
|||||||
|
/*
|
||||||
|
LUFA Library
|
||||||
|
Copyright (C) Dean Camera, 2011.
|
||||||
|
|
||||||
|
dean [at] fourwalledcubicle [dot] com
|
||||||
|
www.lufa-lib.org
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||||
|
|
||||||
|
Permission to use, copy, modify, distribute, and sell this
|
||||||
|
software and its documentation for any purpose is hereby granted
|
||||||
|
without fee, provided that the above copyright notice appear in
|
||||||
|
all copies and that both that the copyright notice and this
|
||||||
|
permission notice and warranty disclaimer appear in supporting
|
||||||
|
documentation, and that the name of the author not be used in
|
||||||
|
advertising or publicity pertaining to distribution of the
|
||||||
|
software without specific, written prior permission.
|
||||||
|
|
||||||
|
The author disclaim all warranties with regard to this
|
||||||
|
software, including all implied warranties of merchantability
|
||||||
|
and fitness. In no event shall the author be liable for any
|
||||||
|
special, indirect or consequential damages or any damages
|
||||||
|
whatsoever resulting from loss of use, data or profits, whether
|
||||||
|
in an action of contract, negligence or other tortious action,
|
||||||
|
arising out of or in connection with the use or performance of
|
||||||
|
this software.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** \file
|
||||||
|
*
|
||||||
|
* Header file for VirtualSerial.c.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _VIRTUALSERIAL_H_
|
||||||
|
#define _VIRTUALSERIAL_H_
|
||||||
|
|
||||||
|
/* Includes: */
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <avr/wdt.h>
|
||||||
|
#include <avr/power.h>
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include <stdio.h>
|
||||||
|
|
||||||
|
#include "Descriptors.h"
|
||||||
|
|
||||||
|
#include <LUFA/Version.h>
|
||||||
|
#include <LUFA/Drivers/Board/LEDs.h>
|
||||||
|
#include <LUFA/Drivers/Board/Joystick.h>
|
||||||
|
#include <LUFA/Drivers/USB/USB.h>
|
||||||
|
|
||||||
|
/* Macros: */
|
||||||
|
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
|
||||||
|
#define LEDMASK_USB_NOTREADY LEDS_LED1
|
||||||
|
|
||||||
|
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
|
||||||
|
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
|
||||||
|
|
||||||
|
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
|
||||||
|
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
|
||||||
|
|
||||||
|
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
|
||||||
|
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
|
||||||
|
|
||||||
|
/* Function Prototypes: */
|
||||||
|
void SetupHardware(void);
|
||||||
|
void CheckJoystickMovement(void);
|
||||||
|
|
||||||
|
void EVENT_USB_Device_Connect(void);
|
||||||
|
void EVENT_USB_Device_Disconnect(void);
|
||||||
|
void EVENT_USB_Device_ConfigurationChanged(void);
|
||||||
|
void EVENT_USB_Device_ControlRequest(void);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
73
Micropendous/Firmware/VirtualSerial/VirtualSerial.txt
Normal file
73
Micropendous/Firmware/VirtualSerial/VirtualSerial.txt
Normal file
@@ -0,0 +1,73 @@
|
|||||||
|
/** \file
|
||||||
|
*
|
||||||
|
* This file contains special DoxyGen information for the generation of the main page and other special
|
||||||
|
* documentation pages. It is not a project source file.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** \mainpage Communications Device Class (Virtual Serial Port) Demo
|
||||||
|
*
|
||||||
|
* \section Sec_Compat Demo Compatibility:
|
||||||
|
*
|
||||||
|
* The following list indicates what microcontrollers are compatible with this demo.
|
||||||
|
*
|
||||||
|
* - Series 7 USB AVRs (AT90USBxxx7)
|
||||||
|
* - Series 6 USB AVRs (AT90USBxxx6)
|
||||||
|
* - Series 4 USB AVRs (ATMEGAxxU4)
|
||||||
|
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
|
||||||
|
*
|
||||||
|
* \section Sec_Info USB Information:
|
||||||
|
*
|
||||||
|
* The following table gives a rundown of the USB utilization of this demo.
|
||||||
|
*
|
||||||
|
* <table>
|
||||||
|
* <tr>
|
||||||
|
* <td><b>USB Mode:</b></td>
|
||||||
|
* <td>Device</td>
|
||||||
|
* </tr>
|
||||||
|
* <tr>
|
||||||
|
* <td><b>USB Class:</b></td>
|
||||||
|
* <td>Communications Device Class (CDC)</td>
|
||||||
|
* </tr>
|
||||||
|
* <tr>
|
||||||
|
* <td><b>USB Subclass:</b></td>
|
||||||
|
* <td>Abstract Control Model (ACM)</td>
|
||||||
|
* </tr>
|
||||||
|
* <tr>
|
||||||
|
* <td><b>Relevant Standards:</b></td>
|
||||||
|
* <td>USBIF CDC Class Standard</td>
|
||||||
|
* </tr>
|
||||||
|
* <tr>
|
||||||
|
* <td><b>Usable Speeds:</b></td>
|
||||||
|
* <td>Full Speed Mode</td>
|
||||||
|
* </tr>
|
||||||
|
* </table>
|
||||||
|
*
|
||||||
|
* \section Sec_Description Project Description:
|
||||||
|
*
|
||||||
|
* Communications Device Class demonstration application.
|
||||||
|
* This gives a simple reference application for implementing
|
||||||
|
* a CDC device acting as a virtual serial port. Joystick
|
||||||
|
* actions are transmitted to the host as strings. The device
|
||||||
|
* does not respond to serial data sent from the host.
|
||||||
|
*
|
||||||
|
* After running this demo for the first time on a new computer,
|
||||||
|
* you will need to supply the .INF file located in this demo
|
||||||
|
* project's directory as the device's driver when running under
|
||||||
|
* Windows. This will enable Windows to use its inbuilt CDC drivers,
|
||||||
|
* negating the need for custom drivers for the device. Other
|
||||||
|
* Operating Systems should automatically use their own inbuilt
|
||||||
|
* CDC-ACM drivers.
|
||||||
|
*
|
||||||
|
* \section Sec_Options Project Options
|
||||||
|
*
|
||||||
|
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
|
||||||
|
*
|
||||||
|
* <table>
|
||||||
|
* <tr>
|
||||||
|
* <td>
|
||||||
|
* None
|
||||||
|
* </td>
|
||||||
|
* </tr>
|
||||||
|
* </table>
|
||||||
|
*/
|
||||||
|
|
||||||
725
Micropendous/Firmware/VirtualSerial/makefile
Normal file
725
Micropendous/Firmware/VirtualSerial/makefile
Normal file
@@ -0,0 +1,725 @@
|
|||||||
|
# Hey Emacs, this is a -*- makefile -*-
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# WinAVR Makefile Template written by Eric B. Weddington, J<>rg Wunsch, et al.
|
||||||
|
# >> Modified for use with the LUFA project. <<
|
||||||
|
#
|
||||||
|
# Released to the Public Domain
|
||||||
|
#
|
||||||
|
# Additional material for this makefile was written by:
|
||||||
|
# Peter Fleury
|
||||||
|
# Tim Henigan
|
||||||
|
# Colin O'Flynn
|
||||||
|
# Reiner Patommel
|
||||||
|
# Markus Pfaff
|
||||||
|
# Sander Pool
|
||||||
|
# Frederik Rouleau
|
||||||
|
# Carlos Lamas
|
||||||
|
# Dean Camera
|
||||||
|
# Opendous Inc.
|
||||||
|
# Denver Gingerich
|
||||||
|
#
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device, using avrdude.
|
||||||
|
# Please customize the avrdude settings below first!
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make doxygen = Generate DoxyGen documentation for the project (must have
|
||||||
|
# DoxyGen installed)
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
|
||||||
|
# Target board (see library "Board Types" documentation, NONE for projects not requiring
|
||||||
|
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
|
||||||
|
# "Board" inside the application directory.
|
||||||
|
BOARD = USBKEY
|
||||||
|
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 8000000
|
||||||
|
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
|
||||||
|
# Output format. (can be srec, ihex, binary)
|
||||||
|
FORMAT = ihex
|
||||||
|
|
||||||
|
|
||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = VirtualSerial
|
||||||
|
|
||||||
|
|
||||||
|
# Object files directory
|
||||||
|
# To put object files in current directory, use a dot (.), do NOT make
|
||||||
|
# this an empty or blank macro!
|
||||||
|
OBJDIR = .
|
||||||
|
|
||||||
|
|
||||||
|
# Path to the LUFA library
|
||||||
|
LUFA_PATH = ../../../..
|
||||||
|
|
||||||
|
|
||||||
|
# LUFA library compile-time options and predefined tokens
|
||||||
|
LUFA_OPTS = -D USB_DEVICE_ONLY
|
||||||
|
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
|
||||||
|
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
|
||||||
|
LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
|
||||||
|
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
|
||||||
|
|
||||||
|
|
||||||
|
# Create the LUFA source path variables by including the LUFA root makefile
|
||||||
|
include $(LUFA_PATH)/LUFA/makefile
|
||||||
|
|
||||||
|
|
||||||
|
# List C source files here. (C dependencies are automatically generated.)
|
||||||
|
SRC = $(TARGET).c \
|
||||||
|
Descriptors.c \
|
||||||
|
$(LUFA_SRC_USB) \
|
||||||
|
$(LUFA_SRC_USBCLASS)
|
||||||
|
|
||||||
|
|
||||||
|
# List C++ source files here. (C dependencies are automatically generated.)
|
||||||
|
CPPSRC =
|
||||||
|
|
||||||
|
|
||||||
|
# List Assembler source files here.
|
||||||
|
# Make them always end in a capital .S. Files ending in a lowercase .s
|
||||||
|
# will not be considered source files but generated files (assembler
|
||||||
|
# output from the compiler), and will be deleted upon "make clean"!
|
||||||
|
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
||||||
|
# it will preserve the spelling of the filenames, and gcc itself does
|
||||||
|
# care about how the name is spelled on its command-line.
|
||||||
|
ASRC =
|
||||||
|
|
||||||
|
|
||||||
|
# Optimization level, can be [0, 1, 2, 3, s].
|
||||||
|
# 0 = turn off optimization. s = optimize for size.
|
||||||
|
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
||||||
|
OPT = s
|
||||||
|
|
||||||
|
|
||||||
|
# Debugging format.
|
||||||
|
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
||||||
|
# AVR Studio 4.10 requires dwarf-2.
|
||||||
|
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
||||||
|
DEBUG = dwarf-2
|
||||||
|
|
||||||
|
|
||||||
|
# List any extra directories to look for include files here.
|
||||||
|
# Each directory must be seperated by a space.
|
||||||
|
# Use forward slashes for directory separators.
|
||||||
|
# For a directory that has spaces, enclose it in quotes.
|
||||||
|
EXTRAINCDIRS = $(LUFA_PATH)/
|
||||||
|
|
||||||
|
|
||||||
|
# Compiler flag to set the C Standard level.
|
||||||
|
# c89 = "ANSI" C
|
||||||
|
# gnu89 = c89 plus GCC extensions
|
||||||
|
# c99 = ISO C99 standard (not yet fully implemented)
|
||||||
|
# gnu99 = c99 plus GCC extensions
|
||||||
|
CSTANDARD = -std=c99
|
||||||
|
|
||||||
|
|
||||||
|
# Place -D or -U options here for C sources
|
||||||
|
CDEFS = -DF_CPU=$(F_CPU)UL
|
||||||
|
CDEFS += -DF_USB=$(F_USB)UL
|
||||||
|
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
|
||||||
|
CDEFS += $(LUFA_OPTS)
|
||||||
|
|
||||||
|
|
||||||
|
# Place -D or -U options here for ASM sources
|
||||||
|
ADEFS = -DF_CPU=$(F_CPU)
|
||||||
|
ADEFS += -DF_USB=$(F_USB)UL
|
||||||
|
ADEFS += -DBOARD=BOARD_$(BOARD)
|
||||||
|
ADEFS += $(LUFA_OPTS)
|
||||||
|
|
||||||
|
# Place -D or -U options here for C++ sources
|
||||||
|
CPPDEFS = -DF_CPU=$(F_CPU)UL
|
||||||
|
CPPDEFS += -DF_USB=$(F_USB)UL
|
||||||
|
CPPDEFS += -DBOARD=BOARD_$(BOARD)
|
||||||
|
CPPDEFS += $(LUFA_OPTS)
|
||||||
|
#CPPDEFS += -D__STDC_LIMIT_MACROS
|
||||||
|
#CPPDEFS += -D__STDC_CONSTANT_MACROS
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#---------------- Compiler Options C ----------------
|
||||||
|
# -g*: generate debugging information
|
||||||
|
# -O*: optimization level
|
||||||
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||||
|
# -Wall...: warning level
|
||||||
|
# -Wa,...: tell GCC to pass this to the assembler.
|
||||||
|
# -adhlns...: create assembler listing
|
||||||
|
CFLAGS = -g$(DEBUG)
|
||||||
|
CFLAGS += $(CDEFS)
|
||||||
|
CFLAGS += -O$(OPT)
|
||||||
|
CFLAGS += -funsigned-char
|
||||||
|
CFLAGS += -funsigned-bitfields
|
||||||
|
CFLAGS += -ffunction-sections
|
||||||
|
CFLAGS += -fno-inline-small-functions
|
||||||
|
CFLAGS += -fpack-struct
|
||||||
|
CFLAGS += -fshort-enums
|
||||||
|
CFLAGS += -fno-strict-aliasing
|
||||||
|
CFLAGS += -Wall
|
||||||
|
CFLAGS += -Wstrict-prototypes
|
||||||
|
#CFLAGS += -mshort-calls
|
||||||
|
#CFLAGS += -fno-unit-at-a-time
|
||||||
|
#CFLAGS += -Wundef
|
||||||
|
#CFLAGS += -Wunreachable-code
|
||||||
|
#CFLAGS += -Wsign-compare
|
||||||
|
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
|
||||||
|
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||||
|
CFLAGS += $(CSTANDARD)
|
||||||
|
|
||||||
|
|
||||||
|
#---------------- Compiler Options C++ ----------------
|
||||||
|
# -g*: generate debugging information
|
||||||
|
# -O*: optimization level
|
||||||
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||||
|
# -Wall...: warning level
|
||||||
|
# -Wa,...: tell GCC to pass this to the assembler.
|
||||||
|
# -adhlns...: create assembler listing
|
||||||
|
CPPFLAGS = -g$(DEBUG)
|
||||||
|
CPPFLAGS += $(CPPDEFS)
|
||||||
|
CPPFLAGS += -O$(OPT)
|
||||||
|
CPPFLAGS += -funsigned-char
|
||||||
|
CPPFLAGS += -funsigned-bitfields
|
||||||
|
CPPFLAGS += -fpack-struct
|
||||||
|
CPPFLAGS += -fshort-enums
|
||||||
|
CPPFLAGS += -fno-exceptions
|
||||||
|
CPPFLAGS += -Wall
|
||||||
|
CPPFLAGS += -Wundef
|
||||||
|
#CPPFLAGS += -mshort-calls
|
||||||
|
#CPPFLAGS += -fno-unit-at-a-time
|
||||||
|
#CPPFLAGS += -Wstrict-prototypes
|
||||||
|
#CPPFLAGS += -Wunreachable-code
|
||||||
|
#CPPFLAGS += -Wsign-compare
|
||||||
|
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
|
||||||
|
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||||
|
#CPPFLAGS += $(CSTANDARD)
|
||||||
|
|
||||||
|
|
||||||
|
#---------------- Assembler Options ----------------
|
||||||
|
# -Wa,...: tell GCC to pass this to the assembler.
|
||||||
|
# -adhlns: create listing
|
||||||
|
# -gstabs: have the assembler create line number information; note that
|
||||||
|
# for use in COFF files, additional information about filenames
|
||||||
|
# and function names needs to be present in the assembler source
|
||||||
|
# files -- see avr-libc docs [FIXME: not yet described there]
|
||||||
|
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
||||||
|
# dump that will be displayed for a given single line of source input.
|
||||||
|
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
|
||||||
|
|
||||||
|
|
||||||
|
#---------------- Library Options ----------------
|
||||||
|
# Minimalistic printf version
|
||||||
|
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
||||||
|
|
||||||
|
# Floating point printf version (requires MATH_LIB = -lm below)
|
||||||
|
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
||||||
|
|
||||||
|
# If this is left blank, then it will use the Standard printf version.
|
||||||
|
PRINTF_LIB =
|
||||||
|
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
||||||
|
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
||||||
|
|
||||||
|
|
||||||
|
# Minimalistic scanf version
|
||||||
|
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
||||||
|
|
||||||
|
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
|
||||||
|
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
||||||
|
|
||||||
|
# If this is left blank, then it will use the Standard scanf version.
|
||||||
|
SCANF_LIB =
|
||||||
|
#SCANF_LIB = $(SCANF_LIB_MIN)
|
||||||
|
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
||||||
|
|
||||||
|
|
||||||
|
MATH_LIB = -lm
|
||||||
|
|
||||||
|
|
||||||
|
# List any extra directories to look for libraries here.
|
||||||
|
# Each directory must be seperated by a space.
|
||||||
|
# Use forward slashes for directory separators.
|
||||||
|
# For a directory that has spaces, enclose it in quotes.
|
||||||
|
EXTRALIBDIRS =
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#---------------- External Memory Options ----------------
|
||||||
|
|
||||||
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||||
|
# used for variables (.data/.bss) and heap (malloc()).
|
||||||
|
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
||||||
|
|
||||||
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||||
|
# only used for heap (malloc()).
|
||||||
|
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
|
||||||
|
|
||||||
|
EXTMEMOPTS =
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#---------------- Linker Options ----------------
|
||||||
|
# -Wl,...: tell GCC to pass this to linker.
|
||||||
|
# -Map: create map file
|
||||||
|
# --cref: add cross reference to map file
|
||||||
|
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
||||||
|
LDFLAGS += -Wl,--relax
|
||||||
|
LDFLAGS += -Wl,--gc-sections
|
||||||
|
LDFLAGS += $(EXTMEMOPTS)
|
||||||
|
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
|
||||||
|
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
||||||
|
#LDFLAGS += -T linker_script.x
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#---------------- Programming Options (avrdude) ----------------
|
||||||
|
|
||||||
|
# Programming hardware
|
||||||
|
# Type: avrdude -c ?
|
||||||
|
# to get a full listing.
|
||||||
|
#
|
||||||
|
AVRDUDE_PROGRAMMER = jtagmkII
|
||||||
|
|
||||||
|
# com1 = serial port. Use lpt1 to connect to parallel port.
|
||||||
|
AVRDUDE_PORT = usb
|
||||||
|
|
||||||
|
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
||||||
|
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
||||||
|
|
||||||
|
|
||||||
|
# Uncomment the following if you want avrdude's erase cycle counter.
|
||||||
|
# Note that this counter needs to be initialized first using -Yn,
|
||||||
|
# see avrdude manual.
|
||||||
|
#AVRDUDE_ERASE_COUNTER = -y
|
||||||
|
|
||||||
|
# Uncomment the following if you do /not/ wish a verification to be
|
||||||
|
# performed after programming the device.
|
||||||
|
#AVRDUDE_NO_VERIFY = -V
|
||||||
|
|
||||||
|
# Increase verbosity level. Please use this when submitting bug
|
||||||
|
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
|
||||||
|
# to submit bug reports.
|
||||||
|
#AVRDUDE_VERBOSE = -v -v
|
||||||
|
|
||||||
|
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
||||||
|
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
||||||
|
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
||||||
|
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#---------------- Debugging Options ----------------
|
||||||
|
|
||||||
|
# For simulavr only - target MCU frequency.
|
||||||
|
DEBUG_MFREQ = $(F_CPU)
|
||||||
|
|
||||||
|
# Set the DEBUG_UI to either gdb or insight.
|
||||||
|
# DEBUG_UI = gdb
|
||||||
|
DEBUG_UI = insight
|
||||||
|
|
||||||
|
# Set the debugging back-end to either avarice, simulavr.
|
||||||
|
DEBUG_BACKEND = avarice
|
||||||
|
#DEBUG_BACKEND = simulavr
|
||||||
|
|
||||||
|
# GDB Init Filename.
|
||||||
|
GDBINIT_FILE = __avr_gdbinit
|
||||||
|
|
||||||
|
# When using avarice settings for the JTAG
|
||||||
|
JTAG_DEV = /dev/com1
|
||||||
|
|
||||||
|
# Debugging port used to communicate between GDB / avarice / simulavr.
|
||||||
|
DEBUG_PORT = 4242
|
||||||
|
|
||||||
|
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
||||||
|
# just set to localhost unless doing some sort of crazy debugging when
|
||||||
|
# avarice is running on a different computer.
|
||||||
|
DEBUG_HOST = localhost
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#============================================================================
|
||||||
|
|
||||||
|
|
||||||
|
# Define programs and commands.
|
||||||
|
SHELL = sh
|
||||||
|
CC = avr-gcc
|
||||||
|
OBJCOPY = avr-objcopy
|
||||||
|
OBJDUMP = avr-objdump
|
||||||
|
SIZE = avr-size
|
||||||
|
AR = avr-ar rcs
|
||||||
|
NM = avr-nm
|
||||||
|
AVRDUDE = avrdude
|
||||||
|
REMOVE = rm -f
|
||||||
|
REMOVEDIR = rm -rf
|
||||||
|
COPY = cp
|
||||||
|
WINSHELL = cmd
|
||||||
|
|
||||||
|
|
||||||
|
# Define Messages
|
||||||
|
# English
|
||||||
|
MSG_ERRORS_NONE = Errors: none
|
||||||
|
MSG_BEGIN = -------- begin --------
|
||||||
|
MSG_END = -------- end --------
|
||||||
|
MSG_SIZE_BEFORE = Size before:
|
||||||
|
MSG_SIZE_AFTER = Size after:
|
||||||
|
MSG_COFF = Converting to AVR COFF:
|
||||||
|
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
||||||
|
MSG_FLASH = Creating load file for Flash:
|
||||||
|
MSG_EEPROM = Creating load file for EEPROM:
|
||||||
|
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
||||||
|
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
||||||
|
MSG_LINKING = Linking:
|
||||||
|
MSG_COMPILING = Compiling C:
|
||||||
|
MSG_COMPILING_CPP = Compiling C++:
|
||||||
|
MSG_ASSEMBLING = Assembling:
|
||||||
|
MSG_CLEANING = Cleaning project:
|
||||||
|
MSG_CREATING_LIBRARY = Creating library:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# Define all object files.
|
||||||
|
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
|
||||||
|
|
||||||
|
# Define all listing files.
|
||||||
|
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
|
||||||
|
|
||||||
|
|
||||||
|
# Compiler flags to generate dependency files.
|
||||||
|
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
|
||||||
|
|
||||||
|
|
||||||
|
# Combine all necessary flags and optional flags.
|
||||||
|
# Add target processor to flags.
|
||||||
|
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
|
||||||
|
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
|
||||||
|
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# Default target.
|
||||||
|
all: begin gccversion sizebefore build sizeafter end
|
||||||
|
|
||||||
|
# Change the build target to build a HEX file or a library.
|
||||||
|
build: elf hex eep lss sym
|
||||||
|
#build: lib
|
||||||
|
|
||||||
|
|
||||||
|
elf: $(TARGET).elf
|
||||||
|
hex: $(TARGET).hex
|
||||||
|
eep: $(TARGET).eep
|
||||||
|
lss: $(TARGET).lss
|
||||||
|
sym: $(TARGET).sym
|
||||||
|
LIBNAME=lib$(TARGET).a
|
||||||
|
lib: $(LIBNAME)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# Eye candy.
|
||||||
|
# AVR Studio 3.x does not check make's exit code but relies on
|
||||||
|
# the following magic strings to be generated by the compile job.
|
||||||
|
begin:
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_BEGIN)
|
||||||
|
|
||||||
|
end:
|
||||||
|
@echo $(MSG_END)
|
||||||
|
@echo
|
||||||
|
|
||||||
|
|
||||||
|
# Display size of file.
|
||||||
|
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
||||||
|
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
|
||||||
|
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
|
||||||
|
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
|
||||||
|
|
||||||
|
|
||||||
|
sizebefore:
|
||||||
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
|
||||||
|
2>/dev/null; echo; fi
|
||||||
|
|
||||||
|
sizeafter:
|
||||||
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
|
||||||
|
2>/dev/null; echo; fi
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# Display compiler version information.
|
||||||
|
gccversion :
|
||||||
|
@$(CC) --version
|
||||||
|
|
||||||
|
|
||||||
|
# Program the device.
|
||||||
|
program: $(TARGET).hex $(TARGET).eep
|
||||||
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
||||||
|
|
||||||
|
flip: $(TARGET).hex
|
||||||
|
batchisp -hardware usb -device $(MCU) -operation erase f
|
||||||
|
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
|
||||||
|
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||||
|
|
||||||
|
dfu: $(TARGET).hex
|
||||||
|
dfu-programmer $(MCU) erase
|
||||||
|
dfu-programmer $(MCU) flash $(TARGET).hex
|
||||||
|
dfu-programmer $(MCU) reset
|
||||||
|
|
||||||
|
flip-ee: $(TARGET).hex $(TARGET).eep
|
||||||
|
$(COPY) $(TARGET).eep $(TARGET)eep.hex
|
||||||
|
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
|
||||||
|
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
|
||||||
|
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||||
|
$(REMOVE) $(TARGET)eep.hex
|
||||||
|
|
||||||
|
dfu-ee: $(TARGET).hex $(TARGET).eep
|
||||||
|
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
|
||||||
|
dfu-programmer $(MCU) reset
|
||||||
|
|
||||||
|
|
||||||
|
# Generate avr-gdb config/init file which does the following:
|
||||||
|
# define the reset signal, load the target file, connect to target, and set
|
||||||
|
# a breakpoint at main().
|
||||||
|
gdb-config:
|
||||||
|
@$(REMOVE) $(GDBINIT_FILE)
|
||||||
|
@echo define reset >> $(GDBINIT_FILE)
|
||||||
|
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
||||||
|
@echo end >> $(GDBINIT_FILE)
|
||||||
|
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
|
||||||
|
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
||||||
|
ifeq ($(DEBUG_BACKEND),simulavr)
|
||||||
|
@echo load >> $(GDBINIT_FILE)
|
||||||
|
endif
|
||||||
|
@echo break main >> $(GDBINIT_FILE)
|
||||||
|
|
||||||
|
debug: gdb-config $(TARGET).elf
|
||||||
|
ifeq ($(DEBUG_BACKEND), avarice)
|
||||||
|
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
||||||
|
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
||||||
|
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
||||||
|
@$(WINSHELL) /c pause
|
||||||
|
|
||||||
|
else
|
||||||
|
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
||||||
|
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
||||||
|
endif
|
||||||
|
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
||||||
|
COFFCONVERT = $(OBJCOPY) --debugging
|
||||||
|
COFFCONVERT += --change-section-address .data-0x800000
|
||||||
|
COFFCONVERT += --change-section-address .bss-0x800000
|
||||||
|
COFFCONVERT += --change-section-address .noinit-0x800000
|
||||||
|
COFFCONVERT += --change-section-address .eeprom-0x810000
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
coff: $(TARGET).elf
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_COFF) $(TARGET).cof
|
||||||
|
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
|
||||||
|
|
||||||
|
|
||||||
|
extcoff: $(TARGET).elf
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
|
||||||
|
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# Create final output files (.hex, .eep) from ELF output file.
|
||||||
|
%.hex: %.elf
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_FLASH) $@
|
||||||
|
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
|
||||||
|
|
||||||
|
%.eep: %.elf
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_EEPROM) $@
|
||||||
|
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||||
|
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
|
||||||
|
|
||||||
|
# Create extended listing file from ELF output file.
|
||||||
|
%.lss: %.elf
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_EXTENDED_LISTING) $@
|
||||||
|
$(OBJDUMP) -h -S -z $< > $@
|
||||||
|
|
||||||
|
# Create a symbol table from ELF output file.
|
||||||
|
%.sym: %.elf
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_SYMBOL_TABLE) $@
|
||||||
|
$(NM) -n $< > $@
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# Create library from object files.
|
||||||
|
.SECONDARY : $(TARGET).a
|
||||||
|
.PRECIOUS : $(OBJ)
|
||||||
|
%.a: $(OBJ)
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_CREATING_LIBRARY) $@
|
||||||
|
$(AR) $@ $(OBJ)
|
||||||
|
|
||||||
|
|
||||||
|
# Link: create ELF output file from object files.
|
||||||
|
.SECONDARY : $(TARGET).elf
|
||||||
|
.PRECIOUS : $(OBJ)
|
||||||
|
%.elf: $(OBJ)
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_LINKING) $@
|
||||||
|
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
|
||||||
|
|
||||||
|
|
||||||
|
# Compile: create object files from C source files.
|
||||||
|
$(OBJDIR)/%.o : %.c
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_COMPILING) $<
|
||||||
|
$(CC) -c $(ALL_CFLAGS) $< -o $@
|
||||||
|
|
||||||
|
|
||||||
|
# Compile: create object files from C++ source files.
|
||||||
|
$(OBJDIR)/%.o : %.cpp
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_COMPILING_CPP) $<
|
||||||
|
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
||||||
|
|
||||||
|
|
||||||
|
# Compile: create assembler files from C source files.
|
||||||
|
%.s : %.c
|
||||||
|
$(CC) -S $(ALL_CFLAGS) $< -o $@
|
||||||
|
|
||||||
|
|
||||||
|
# Compile: create assembler files from C++ source files.
|
||||||
|
%.s : %.cpp
|
||||||
|
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
|
||||||
|
|
||||||
|
|
||||||
|
# Assemble: create object files from assembler source files.
|
||||||
|
$(OBJDIR)/%.o : %.S
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_ASSEMBLING) $<
|
||||||
|
$(CC) -c $(ALL_ASFLAGS) $< -o $@
|
||||||
|
|
||||||
|
|
||||||
|
# Create preprocessed source for use in sending a bug report.
|
||||||
|
%.i : %.c
|
||||||
|
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
|
||||||
|
|
||||||
|
|
||||||
|
# Target: clean project.
|
||||||
|
clean: begin clean_list end
|
||||||
|
|
||||||
|
clean_list :
|
||||||
|
@echo
|
||||||
|
@echo $(MSG_CLEANING)
|
||||||
|
$(REMOVE) $(TARGET).hex
|
||||||
|
$(REMOVE) $(TARGET).eep
|
||||||
|
$(REMOVE) $(TARGET).cof
|
||||||
|
$(REMOVE) $(TARGET).elf
|
||||||
|
$(REMOVE) $(TARGET).map
|
||||||
|
$(REMOVE) $(TARGET).sym
|
||||||
|
$(REMOVE) $(TARGET).lss
|
||||||
|
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
|
||||||
|
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
|
||||||
|
$(REMOVE) $(SRC:.c=.s)
|
||||||
|
$(REMOVE) $(SRC:.c=.d)
|
||||||
|
$(REMOVE) $(SRC:.c=.i)
|
||||||
|
$(REMOVEDIR) .dep
|
||||||
|
|
||||||
|
doxygen:
|
||||||
|
@echo Generating Project Documentation \($(TARGET)\)...
|
||||||
|
@doxygen Doxygen.conf
|
||||||
|
@echo Documentation Generation Complete.
|
||||||
|
|
||||||
|
clean_doxygen:
|
||||||
|
rm -rf Documentation
|
||||||
|
|
||||||
|
checksource:
|
||||||
|
@for f in $(SRC) $(CPPSRC) $(ASRC); do \
|
||||||
|
if [ -f $$f ]; then \
|
||||||
|
echo "Found Source File: $$f" ; \
|
||||||
|
else \
|
||||||
|
echo "Source File Not Found: $$f" ; \
|
||||||
|
fi; done
|
||||||
|
|
||||||
|
|
||||||
|
# Create object files directory
|
||||||
|
$(shell mkdir $(OBJDIR) 2>/dev/null)
|
||||||
|
|
||||||
|
|
||||||
|
# Include the dependency files.
|
||||||
|
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
|
||||||
|
|
||||||
|
|
||||||
|
# Listing of phony targets.
|
||||||
|
.PHONY : all begin finish end sizebefore sizeafter gccversion \
|
||||||
|
build elf hex eep lss sym coff extcoff doxygen clean \
|
||||||
|
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
|
||||||
|
debug gdb-config checksource
|
||||||
@@ -60,7 +60,7 @@
|
|||||||
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
MCU = at90usb162
|
MCU = at90usb1287
|
||||||
|
|
||||||
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
# Target architecture (see library "Board Types" documentation).
|
||||||
@@ -70,7 +70,7 @@ ARCH = AVR8
|
|||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring
|
# Target board (see library "Board Types" documentation, NONE for projects not requiring
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
|
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
|
||||||
# "Board" inside the application directory.
|
# "Board" inside the application directory.
|
||||||
BOARD = USBTINYMKII
|
BOARD = NONE
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency.
|
# Processor frequency.
|
||||||
|
|||||||
Reference in New Issue
Block a user