146 Commits

Author SHA1 Message Date
opendous
97d0ef4750 Moved AndroidAccessoryHost 2011-10-27 00:59:46 +00:00
opendous
3c90189040 Added Micropendous-A 3.3V conversion picture. 2011-10-27 00:48:16 +00:00
opendous
bdd3684293 Updated to LUFA-111009. 2011-10-26 23:36:49 +00:00
opendous
4de1c73e95 Added an updated revision of the Micropendous board which uses smaller sized resistors but larger sized capacitors. Intended for automated production versus DIY. 2011-10-19 18:57:57 +00:00
opendous@gmail.com
44a2e2fabe Bill Of Materials for the Micropendous Project
QTY, Manufacturer Part#          , Cost($USD each) - References - Description
  1, AT90USB1287-AU              ,12.92 - IC1 - IC AVR MCU 128K 64TQFP
  1, FSUSB30MUX                  , 1.79 - IC3 - IC USB SWITCH DUAL 2X1 10MSOP
  1, SN74AHC573PWR               , 0.58 - IC4 - IC OCT TRNSP D-TYP LATCH 20TSSOP
  1, IS61C1024AL-12JLI           , 3.64 - IC5 - IC SRAM 1MBIT 12NS 32SOJ 300-MIL-Wide
  1, TXB0108PWR                  , 2.80 - IC6 - IC 8-BIT TRNSTR 15KV ESD 20TSSOP
  1, XC6222B331PR-G              , 0.76 - IC7 - IC REG LDO 3.3V SOT-89-5
  1, AP2151WG-7                  , 0.99 - IC9 - IC PWR SW USB 1CH 0.5A SOT-25-5
  1, LM358DGKR                   , 0.59 - IC10 - IC OPAMP GP 700KHZ DUAL 8MSOP
  1, MIC39100-5.0WS              , 1.40 - IC11 - IC REG LDO 1A 5.0V SOT223 16V Max. Input
  2, 500R15N180JV4T              , 0.04 - C1 C2 - CAP CER 18PF 50V NP0 0805
  2, 08055C103KAT2A              , 0.03 - C12 C43 - CAP CER 10000PF = 0.01uF 50V X7R 10% Low ESR 0805
 12, GRM21BR71H104KA01L          , 0.06 - C3 C4 C11 C18 C35 C36 C37 C39 C46 C51 C53 C55 - CAP CER .1UF 50V 10% X7R 0805
  3, GRM21BR71C105KA01L          , 0.14 - C5 C10 C44 - CAP CER 1.0UF 16V 10% X7R 0805
  7, JMK212BJ106KG-T             , 0.48 - C13 C17 C21 C41 C48 C49 C50 - CAP CER 10UF 6.3V 20% X5R 0805
  1, GRM31CR61E106KA12L          , 0.51 - C52 - CAP CER 10UF 25V X5R 1206 (LDO Input)
  1, TR3A226K010C0900            , 1.20 - C54 - CAP TANT 22UF 10V 10% SMD 1206 (LDO Output) (0.2ohm<ESR<1ohm)
  1, C3225X5R0J107M              , 1.30 - C42 - CAP CER 100UF 6.3V X5R 20% 1210
  1, PMEG3020ER,115              , 0.60 - D1 - SCHOTTKY RECT 30V 2.0A SOD-123W
  1, APT2012SGC                  , 0.13 - D2 - LED 2X1.2MM 568NM GN WTR CLR SMD 0805
  1, MF-NSMF075-2                , 0.41 - F1 - PTC RESETTABLE Fuse Ihold=0.75A 6V 1206
  2, BLM21PG300SN1D              , 0.28 - L2 L3 - FERRITE CHIP 30 OHM 3000MA 0805 0.15-Ohm-DCR
  1, FDN304PZ                    , 0.61 - Q1 - MOSFET P-CH 20V 2.4A SSOT-3
  2, MCR10EZPF22R0               , 0.03 - R12 R13 - RES 22.0 OHM 1/8W 1% 0805 SMD
  1, ESR10EZPJ101                , 0.83 - R1 - RES 100 OHM 1/4W Anti-Surge 5% 0805 SMD
  1, RMCF0805JT1K00              , 0.03 - R45 - RES 1K OHM 1/8W 5% 0805 SMD
  1, RMCF0805JT5K10              , 0.03 - R42 - RES 5.1K OHM 1/8W 5% 0805 SMD
  6, RMCF0805JT10K0              , 0.03 - R9 R11 R40 R41 R43 R44 - RES 10K OHM 1/8W 5% 0805 SMD
  2, RMCF0805JT47K0              , 0.03 - R8 R14 - RES 47K OHM 1/8W 5% 0805 SMD
  2, EVQ-Q2U03W                  , 0.29 - SW1 SW2 - SWITCH LT 6MM 260GF H=3.1MM SMD
  1, PJ-102AH                    , 0.88 - DC_POWER_JACK(J1) - CONN PWR JACK 2.1X5.5MM HIGH CURRENT
  1, ABLS2-16.000MHZ-D4Y-T       , 0.64 - X1 - CRYSTAL 16.0000 MHZ 18PF SMD HC49/US -40C to +85C
  4, 67997-410HLF                , 0.40 - PORTB(U7) PORTB_3V3(U6) PORTD(U8) JTAG(U4) - CONN HEADER 10POS .100 STR TIN
  2, PPPC061LFBN-RC              , 0.61 - Power/Analog Headers - CONN HEADER FEMALE 6POS .1" GOLD
  2, PPPC081LFBN-RC              , 0.76 - Digital Headers - CONN HEADER FEMALE 8POS .1" GOLD
  1, 61729-1011BLF               , 1.16 - U1 - USB RCPT B-TYPE TH HORIZONTAL RA FULL BACK
  1, 690-004-661-013             , 1.24 - U2 - CONN USB RCPT A-TYPE VERT RA
  1, DM3D-SF                     , 1.92 - U3 - CONN MICRO SD R/A PUSH-PULL SMD
  1, NWE18DHRN-T941              , 2.47 - U9 - CONN PCI EXPRESS 36POS VERT PCB
----------------------------Total=49.82

Notes:- Component costs are based on minimum quantity orders from DigiKey
      - Components are chosen for operation over the Industrial Temperature Range (-40C to 85C)
        However, note that most microSD cards can only operate over Commercial Range (-10C to 70C)
      - The board is intended to be used with Volgen's KTPS24-06035MP or
        CUI's EMSA060300-P5P-SZ Multi-blade Wall Adapter Power Supplies or
        some other switching 6V DC 2A+ Power Supply with a 2.1mm Center-Positive Connector
      - FSUSB30MUX (IC3) can be substituted with FSUSB20MUX or TS3USB30EDGSR
      - SN74AHC573PWR (IC4) can be substituted with 74VHC573MTCX
      - IS61C1024AL-12JLI (IC5) can be substituted with IDT71024S15TYG8 which has increased power consumption
      - TXB0108PWR (IC6) can be substituted with ADG3300BRUZ
      - XC6222B331PR-G can be substituted with XC6220B331PR-G
      - AP2151WG-7 (IC9) can be substituted with AP2171WG-7, or AP2191WG-7
      - LM358DGKR (IC10) can be substituted with LM358ADGKR, LM358ST, or LM358AST
      - MIC39100-5.0WS (IC11) can be substituted with LM2940IMP-5.0/NOPB
      - GRM21BR71C105KA01L (C5 1uF) must be rated 16V+, such as C0805C105K4RACTU
      - GRM21BR71H104KA01L (C53 0.1uF) must be rated 25V+
      - C3225X5R0J107M (C42 100uF) can be another low-ESR capacitor such as C1210C107M9PACTU or TPSB107M010R0400
      - MF-NSMF075-2 (F1) can be substituted with 0ZCA0075FF2G
      - BLM21PG300SN1D (FB) can be substituted with MPZ2012S300A
      - FDN304PZ can be substituted with SI2323DS-T1-E3
      - LED (D2) can be substituted with any 0805 LED but may need to adjust value of R45
      - ESR03EZPJ101 (R1) can be substituted with CRCW0603100RFKEAHP
      - EVQ-Q2U03W can be substituted with TL59AF160Q, a thru-hole switch
      - ABLS2-16.000MHZ-D4Y-T can be substituted with ABLS-16.000MHZ-K4T or ECS-160-18-5PXEN-TR
      - NWE18DHRN-T941 (U9) can be substituted with PCIE-036-02-F-D-EMS2 from Samtec.com
2011-09-14 17:24:17 +00:00
opendous@gmail.com
c2a3f6cffe Bill Of Materials for the Micropendous Project
QTY, Manufacturer Part#          , Cost($USD each) - References - Description
  1, AT90USB1287-AU              ,12.92 - IC1 - IC AVR MCU 128K 64TQFP
  1, FSUSB30MUX                  , 1.79 - IC3 - IC USB SWITCH DUAL 2X1 10MSOP
  1, SN74AHC573PWR               , 0.58 - IC4 - IC OCT TRNSP D-TYP LATCH 20TSSOP
  1, IS61C1024AL-12JLI           , 3.64 - IC5 - IC SRAM 1MBIT 12NS 32SOJ 300-MIL-Wide
  1, TXB0108PWR                  , 2.80 - IC6 - IC 8-BIT TRNSTR 15KV ESD 20TSSOP
  1, XC6222B331PR-G              , 0.76 - IC7 - IC REG LDO 3.3V SOT-89-5
  1, AP2151WG-7                  , 0.99 - IC9 - IC PWR SW USB 1CH 0.5A SOT-25-5
  1, LM358DGKR                   , 0.59 - IC10 - IC OPAMP GP 700KHZ DUAL 8MSOP
  1, MIC39100-5.0WS              , 1.40 - IC11 - IC REG LDO 1A 5.0V SOT223 16V Max. Input
  2, 500R15N180JV4T              , 0.04 - C1 C2 - CAP CER 18PF 50V NP0 0805
  2, 08055C103KAT2A              , 0.03 - C12 C43 - CAP CER 10000PF = 0.01uF 50V X7R 10% Low ESR 0805
 12, GRM21BR71H104KA01L          , 0.06 - C3 C4 C11 C18 C35 C36 C37 C39 C46 C51 C53 C55 - CAP CER .1UF 50V 10% X7R 0805
  3, GRM21BR71C105KA01L          , 0.14 - C5 C10 C44 - CAP CER 1.0UF 16V 10% X7R 0805
  7, JMK212BJ106KG-T             , 0.48 - C13 C17 C21 C41 C48 C49 C50 - CAP CER 10UF 6.3V 20% X5R 0805
  1, GRM31CR61E106KA12L          , 0.51 - C52 - CAP CER 10UF 25V X5R 1206 (LDO Input)
  1, TR3A226K010C0900            , 1.20 - C54 - CAP TANT 22UF 10V 10% SMD 1206 (LDO Output) (0.2ohm<ESR<1ohm)
  1, C3225X5R0J107M              , 1.30 - C42 - CAP CER 100UF 6.3V X5R 20% 1210
  1, PMEG3020ER,115              , 0.60 - D1 - SCHOTTKY RECT 30V 2.0A SOD-123W
  1, APT2012SGC                  , 0.13 - D2 - LED 2X1.2MM 568NM GN WTR CLR SMD 0805
  1, MF-NSMF075-2                , 0.41 - F1 - PTC RESETTABLE Fuse Ihold=0.75A 6V 1206
  2, BLM21PG300SN1D              , 0.28 - L2 L3 - FERRITE CHIP 30 OHM 3000MA 0805 0.15-Ohm-DCR
  1, FDN304PZ                    , 0.61 - Q1 - MOSFET P-CH 20V 2.4A SSOT-3
  2, MCR10EZPF22R0               , 0.03 - R12 R13 - RES 22.0 OHM 1/8W 1% 0805 SMD
  1, ESR10EZPJ101                , 0.83 - R1 - RES 100 OHM 1/4W Anti-Surge 5% 0805 SMD
  1, RMCF0805JT1K00              , 0.03 - R45 - RES 1K OHM 1/8W 5% 0805 SMD
  1, RMCF0805JT5K10              , 0.03 - R42 - RES 5.1K OHM 1/8W 5% 0805 SMD
  6, RMCF0805JT10K0              , 0.03 - R9 R11 R40 R41 R43 R44 - RES 10K OHM 1/8W 5% 0805 SMD
  2, RMCF0805JT47K0              , 0.03 - R8 R14 - RES 47K OHM 1/8W 5% 0805 SMD
  2, EVQ-Q2U03W                  , 0.29 - SW1 SW2 - SWITCH LT 6MM 260GF H=3.1MM SMD
  1, PJ-102AH                    , 0.88 - DC_POWER_JACK(J1) - CONN PWR JACK 2.1X5.5MM HIGH CURRENT
  1, ABLS2-16.000MHZ-D4Y-T       , 0.64 - X1 - CRYSTAL 16.0000 MHZ 18PF SMD HC49/US -40C to +85C
  4, 67997-410HLF                , 0.40 - PORTB(U7) PORTB_3V3(U6) PORTD(U8) JTAG(U4) - CONN HEADER 10POS .100 STR TIN
  2, PPPC061LFBN-RC              , 0.61 - Power/Analog Headers - CONN HEADER FEMALE 6POS .1" GOLD
  2, PPPC081LFBN-RC              , 0.76 - Digital Headers - CONN HEADER FEMALE 8POS .1" GOLD
  1, 61729-1011BLF               , 1.16 - U1 - USB RCPT B-TYPE TH HORIZONTAL RA FULL BACK
  1, 690-004-661-013             , 1.24 - U2 - CONN USB RCPT A-TYPE VERT RA
  1, DM3D-SF                     , 1.92 - U3 - CONN MICRO SD R/A PUSH-PULL SMD
  1, NWE18DHRN-T941              , 2.47 - U9 - CONN PCI EXPRESS 36POS VERT PCB
----------------------------Total=49.82

Notes:- Component costs are based on minimum quantity orders from DigiKey
      - The board is intended to be used with Volgen's KTPS24-06035MP or
        CUI's EMSA060300-P5P-SZ Multi-blade Wall Adapter Power Supplies or
        some other switching 6V DC 2A+ Power Supply with a 2.1mm Center-Positive Connector
      - FSUSB30MUX (IC3) can be substituted with FSUSB20MUX or TS3USB30EDGSR
      - SN74AHC573PWR (IC4) can be substituted with 74VHC573MTCX
      - IS61C1024AL-12JLI (IC5) can be substituted with IDT71024S15TYG8 which has increased power consumption
      - TXB0108PWR (IC6) can be substituted with ADG3300BRUZ
      - XC6222B331PR-G can be substituted with XC6220B331PR-G
      - AP2151WG-7 (IC9) can be substituted with AP2171WG-7, or AP2191WG-7
      - LM358DGKR (IC10) can be substituted with LM358ADGKR, LM358ST, or LM358AST
      - MIC39100-5.0WS (IC11) can be substituted with LM2940IMP-5.0/NOPB
      - GRM21BR71C105KA01L (C5 1uF) must be rated 16V+, such as C0805C105K4RACTU
      - GRM21BR71H104KA01L (C53 0.1uF) must be rated 25V+
      - C3225X5R0J107M (C42 100uF) can be another low-ESR capacitor such as C1210C107M9PACTU or TPSB107M010R0400
      - MF-NSMF075-2 (F1) can be substituted with 0ZCA0075FF2G
      - BLM21PG300SN1D (FB) can be substituted with MPZ2012S300A
      - FDN304PZ can be substituted with SI2323DS-T1-E3
      - LED (D2) can be substituted with any 0805 LED but may need to adjust value of R45
      - ESR03EZPJ101 (R1) can be substituted with CRCW0603100RFKEAHP
      - EVQ-Q2U03W can be substituted with TL59AF160Q, a thru-hole switch
      - ABLS2-16.000MHZ-D4Y-T can be substituted with ABLS-16.000MHZ-K4T or ECS-160-18-5PXEN-TR
      - NWE18DHRN-T941 (U9) can be substituted with PCIE-036-02-F-D-EMS2 from Samtec.com
2011-09-14 17:19:09 +00:00
opendous
d487934b13 Updated Micropendous-Gerbers_ProperOutline.zip to a version with Polygon zone fill. 2011-08-19 21:44:24 +00:00
opendous
11b3b6e716 Added Pinout files for the new version of the Micropendous. 2011-08-13 23:56:39 +00:00
opendous
5d162c25f5 Added Gerbers for the new version of the Micropendous. 2011-08-13 23:50:45 +00:00
opendous
236c02cff7 Added new version of Micropendous (Arduino-like) design. Moved the old version to Micropendous-OTG. Micropendous-OTG was based on the Micropendous-DIP schematic which includes OTG capability. The new Micropendous version focuses on Device and Host modes and the OTG pin (PE3) is used to control the voltage translator. 2011-08-13 23:41:39 +00:00
opendous
8f557fb36d Micropendous-A Power schematic picture update. 2011-07-13 01:00:27 +00:00
opendous
7fbd0fe3cb Minor update to Micropendous-A Bill of Materials. 2011-06-26 16:42:34 +00:00
opendous
164e17f1a5 Minor update to Micropendous-A Bill of Materials. 2011-06-26 16:40:52 +00:00
opendous
ec06040a8e Added complete Micropendous-A design files. 2011-06-26 16:37:52 +00:00
opendous
975564e245 Partially updated Micropendous design files. Will add the rest once prototyping is complete. 2011-05-19 13:57:37 +00:00
opendous
504ca68eba Updated Micropendous-A Bill Of Materials 2011-05-03 21:25:38 +00:00
opendous
478ac3f90c Added Micropendous-A Bill of Materials. 2011-05-03 21:17:46 +00:00
opendous
0b1f48eb05 Updated userial utility. 2011-03-01 22:20:30 +00:00
opendous
ba0ed1fb15 Updated bus scan utility for userial and added a simple script to communicate with a 24AA08 EEPROM and a TC74 temperature sensor. 2011-03-01 22:09:08 +00:00
opendous
4fbbc41efa Added a Python bus scan utility for userial. 2011-03-01 21:20:40 +00:00
opendous
d571d37b83 Some library files got lost. 2011-03-01 18:47:11 +00:00
opendous
8da97c23e4 Updated LUFA to LUFA-101122 and updated all example projects. 2011-03-01 18:13:45 +00:00
opendous
ebedc0c76b Added Micropendous-32U2 and Micropendous-ETH designs. Minor updates to other hardware designs. 2011-03-01 17:10:57 +00:00
opendous
bb5e4f59b6 Added newer versions of useful software source to archive. 2011-03-01 15:20:38 +00:00
opendous
0ca9828978 Added alternate Micropendous-DIP assemby instructions. 2011-01-11 18:35:25 +00:00
opendous
ce8e5c03e2 Added alternate assembly instructions for the Micropendous. 2011-01-08 22:57:46 +00:00
opendous
423d4997ef Updated Micropendous-DIP Bill Of Materials. 2010-12-23 10:18:39 +00:00
opendous
0604568fd3 Updated Micropendous-DIP assembly instructions. 2010-12-23 10:02:33 +00:00
opendous
8663d31135 Updated Micropendous-DIP silkscreen layers to reduce gerber dimensions. 2010-12-23 10:00:08 +00:00
opendous
db202fdd53 Updated Micropendous silkscreen layers to reduce gerber dimensions. 2010-12-23 09:57:32 +00:00
opendous
abc2b3ac4d Added LUFAduino usage picture. 2010-12-13 14:22:20 +00:00
opendous
9b2304f6eb Updated LUFA to LUFA-101122. Updated LUFAduino, MicropendousKeyboardTest, USBVirtualSerial, and USBVirtualSerial_FreeRTOS firmware demos to LUFA-101122. Updated Micropendous and Micropendous-DIP hardware designs. 2010-12-13 13:56:17 +00:00
opendous
210dc42596 Updated Bill Of Materials for the Micropendous and Micropendous-DIP projects. 2010-11-28 04:50:44 +00:00
opendous
31fe8d04a8 Added pictures of the new Micropendous boards. 2010-11-27 23:34:54 +00:00
opendous
c48926eb34 Updated design files for the Micropendous and Micropendous-DIP projects and added pictures for both. These projects as well as a distribution based on LUFA-101122 are proceeding well. 2010-11-27 23:29:21 +00:00
opendous
461c10440a Updated Micropendous-DIP with series resistor from PE7 to FSUSB20 control pin to act as a simple voltage translator. 2010-10-14 23:27:38 +00:00
opendous
6ff85d5c26 Updated Micropendous1 design to 8mil-8mil-20mil. 2010-10-13 13:21:56 +00:00
opendous
1ceb46991a Updated Micropendous-32U4 with new microSD connector. 2010-10-12 20:19:13 +00:00
opendous
3d1cf85656 Updated Micropendous-DIP bottom layer silkscreen. 2010-10-12 20:08:57 +00:00
opendous
c44c1419d5 Updated Micropendous and Micropendous-DIP AT90USB1287-based designs. 2010-10-12 06:41:06 +00:00
opendous
db1006a615 Complete renaming. 2010-10-12 06:18:22 +00:00
opendous
fbadc2fc38 Renamed the new AT90USB1287-based projects. 2010-10-12 06:12:28 +00:00
opendous
4f69788fb3 Added design files for the new version of the Micropendous3. 2010-10-07 22:03:02 +00:00
opendous
3ab12bdcf3 Moved old version of Micropendous3 board to subdirectory. 2010-10-07 22:01:12 +00:00
opendous
e032fdf662 Added a new project based on the AT90USB162/ATmega162. It is not yet complete. 2010-09-15 20:21:04 +00:00
opendous
d6b9a6cbce Added some revised Micropendous2 pictures. 2010-06-07 14:10:06 +00:00
opendous
0f2b1ead88 Updated Micropendous-1287 project and TestSRAM.py external SRAM testing software. 2010-06-05 18:24:11 +00:00
opendous
569f23d99b Archive update. 2010-03-18 04:24:55 +00:00
opendous
5c7a2367d4 Archive update. 2010-03-18 02:57:40 +00:00
opendous
9b701b450e Updated to LUFA 100219 2010-03-15 15:07:05 +00:00