Garth Minette 59c399aaa8 Z cable chain and wiring.

2016-07-07 13:33:35 -07:00

..

cable_chain_link_parts.stl

Updated for bottom cablechain.

2016-06-18 16:49:54 -07:00

cable_chain_mount_parts.stl

Updated for bottom cablechain.

2016-06-18 16:49:54 -07:00

cooling_fan_shroud_parts.stl

Revarted to lifter rods for the Z axis.

2015-09-26 17:12:43 -07:00

drive_gear_parts.stl

Removed redundant slop offset for XY sled rack.

2015-11-01 14:22:46 -08:00

extruder_fan_clip_parts.stl

Improved stl_normalize.py script.

2015-09-10 00:59:35 -07:00

extruder_fan_shroud_parts.stl

Reduced parts sizes to be printable in a 150x150mm area.

2015-09-17 17:58:34 -07:00

extruder_idler_parts.stl

Tighten up extruder latch. Loosen z_sled threaded rod clamp slightly.

2015-09-28 12:10:59 -07:00

extruder_motor_clip_parts.stl

Improved stl_normalize.py script.

2015-09-10 00:59:35 -07:00

jhead_platform_parts.stl

Added assembly instructions.

2015-10-10 01:03:01 -07:00

lifter_lock_nut_parts.stl

Revarted to lifter rods for the Z axis.

2015-09-26 17:12:43 -07:00

lifter_rod_coupler_parts.stl

Revarted to lifter rods for the Z axis.

2015-09-26 17:12:43 -07:00

motor_mount_plate_parts.stl

Reduced parts sizes to be printable in a 150x150mm area.

2015-09-17 17:58:34 -07:00

platform_support_parts.stl

Z cable chain and wiring.

2016-07-07 13:33:35 -07:00

rail_segment_parts.stl

Z cable chain and wiring.

2016-07-07 13:33:35 -07:00

rail_xy_motor_segment_parts.stl

Z cable chain and wiring.

2016-07-07 13:33:35 -07:00

rail_y_endcap_parts.stl

Removed limit switch clip from Y axis endcaps.

2015-10-12 16:42:02 -07:00

rail_z_endcap_parts.stl

Removed limit switch clip from Y axis endcaps.

2015-10-12 16:42:02 -07:00

rail_z_motor_segment_parts.stl

Z cable chain and wiring.

2016-07-07 13:33:35 -07:00

rambo_mount_parts.stl

Reduced parts sizes to be printable in a 150x150mm area.

2015-09-17 17:58:34 -07:00

ramps_mount_parts.stl

Rotated RAMPS mount for SD card boards.

2015-11-13 00:18:30 -08:00

sled_endcap_parts.stl

Reduced parts sizes to be printable in a 150x150mm area.

2015-09-17 17:58:34 -07:00

slop_calibrator_parts.stl

Improved stl_normalize.py script.

2015-09-10 00:59:35 -07:00

spool_holder_parts.stl

Reduced parts sizes to be printable in a 150x150mm area.

2015-09-17 17:58:34 -07:00

support_leg_parts.stl

Improved stl_normalize.py script.

2015-09-10 00:59:35 -07:00

xy_joiner_parts.stl

Z cable chain and wiring.

2016-07-07 13:33:35 -07:00

xy_sled_parts.stl

Removed redundant slop offset for XY sled rack.

2015-11-01 14:22:46 -08:00

yz_joiner_parts.stl

Reduced parts sizes to be printable in a 150x150mm area.

2015-09-17 17:58:34 -07:00

z_sled_parts.stl

Tighten up extruder latch. Loosen z_sled threaded rod clamp slightly.

2015-09-28 12:10:59 -07:00