mirror of
https://github.com/NabuCasa/yellow.git
synced 2025-10-27 12:04:18 -07:00
Add Pinion metadata
Add metadata for Pinion to generate interactive diagrams. The following
command is being used to generate the diagrams for
yellow.home-assistant.io:
$ pinion generate rendered \
--renderer normal --projection orthographic \
--board Yellow.kicad_pcb --specification Yellow_PoE_Pinion_Front.yaml
Signed-off-by: Stefan Agner <stefan@agner.ch>
This commit is contained in:
Stefan Agner
187
Yellow_PoE_Pinion_Front.yaml
Normal file
187
Yellow_PoE_Pinion_Front.yaml
Normal file
@@ -0,0 +1,187 @@
|
||||
name: Home Assistant Yellow front
|
||||
description: Top side of Home Assistant Yellow
|
||||
components:
|
||||
U1:
|
||||
description: Compute Module 4 board-to-board connector
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
U11:
|
||||
description: |
|
||||
[Silicon Labs MGM210P](https://www.silabs.com/wireless/zigbee/efr32mg21-series-2-modules) wireless radio.
|
||||
|
||||
Zigbee/Thread capable IEEE 802.15.4 radio connected to the CM4 via UART.
|
||||
|
||||
Available on `/dev/ttyAMA1`, typical baud rate is 115200 with hardware
|
||||
flow control.
|
||||
highlight: true
|
||||
J1:
|
||||
description: Power DC 12 V / 2 A (5.1/2.1 mm barrel connector)
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
J2:
|
||||
description: |
|
||||
Gigabit Ethernet connector (RJ45)
|
||||
|
||||
PoE+ IEEE 802.3at-2009 Class 3 or 4 (see JP5)
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
J3:
|
||||
description: |
|
||||
USB-C connector (USB 2.0 device only)
|
||||
|
||||
Depending on JP1 configuration, this connector allows to:
|
||||
|
||||
* UART: Access the serial console via USB to UART connector. See the following guides on how to use the serial console:
|
||||
* [Using the serial console for debugging (Windows)](/guides/use-serial-console-windows/)
|
||||
* [Using the serial console for debugging (Linux)](/guides/use-serial-console-linux/)
|
||||
* USB: Access the CM4 as a USB device (e.g. for recovery)
|
||||
* [How to re-install the operating system](/guides/reinstall-os/)
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
J4:
|
||||
description: 2 x USB 2.0 Host connector
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
J5:
|
||||
description: |
|
||||
3.5 mm analog audio jack, line-out (2 V RMS)
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
SW1:
|
||||
description: |
|
||||
Power Button
|
||||
|
||||
When Home Assistant OS is running, press and hold for 5 s to power off the
|
||||
system.
|
||||
groups: [ Buttons ]
|
||||
highlight: true
|
||||
SW2:
|
||||
description: |
|
||||
Wipe Button
|
||||
|
||||
Allows you to wipe all user data from your Home Assistant OS installation.
|
||||
Press and hold until the yellow LED starts blinking to initiate a user
|
||||
data wipe.
|
||||
|
||||
To delete all boot\nfiles from the internal eMMC or NVMe, hold this button
|
||||
and the power button simultaneously. This allows you to reinstall HAOS using
|
||||
the Home Assistant OS Installer for Yellow.
|
||||
groups: [ Buttons ]
|
||||
highlight: true
|
||||
SW3:
|
||||
description: |
|
||||
USB boot mode button. Allows recovery via USB-C (J3).
|
||||
|
||||
Pressing this button will force the CM4 into USB boot mode. See J3 for
|
||||
more details.
|
||||
|
||||
This jumper allows to force nRPIBOOT to GND.
|
||||
|
||||
groups: [ Buttons ]
|
||||
highlight: true
|
||||
J12:
|
||||
description: |
|
||||
M.2 B-Key connector.
|
||||
|
||||
Note: This conector only has power and 1xPCIe Gen 2 connected.
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
D4:
|
||||
description: |
|
||||
Power LED (red)
|
||||
|
||||
See the [Home Assistant Yellow LEDs](/guides/yellow-leds/) documentation for a
|
||||
detailed description of the meaning of their blinking patterns.
|
||||
groups: [ LEDs ]
|
||||
highlight: true
|
||||
D5:
|
||||
description: |
|
||||
Activity LED (green)
|
||||
|
||||
See the [Home Assistant Yellow LEDs](/guides/yellow-leds/) documentation for a
|
||||
detailed description of the meaning of their blinking patterns.
|
||||
groups: [ LEDs ]
|
||||
highlight: true
|
||||
D6:
|
||||
description: |
|
||||
Status LED (yellow)
|
||||
|
||||
See the [Home Assistant Yellow LEDs](/guides/yellow-leds/) documentation for a
|
||||
detailed description of the meaning of their blinking patterns.
|
||||
groups: [ LEDs ]
|
||||
highlight: true
|
||||
D25:
|
||||
description: |
|
||||
Radio LED (blue)
|
||||
|
||||
See the [Home Assistant Yellow LEDs](/guides/yellow-leds/) documentation for a
|
||||
detailed description of the meaning of their blinking patterns.
|
||||
groups: [ LEDs ]
|
||||
highlight: true
|
||||
JP1:
|
||||
description: |
|
||||
USB-C functionality selector
|
||||
|
||||
Selects the functionality of the USB-C connector. See J3 for more details.
|
||||
groups: [ Jumpers ]
|
||||
highlight: true
|
||||
JP5:
|
||||
description: PoE Class selector
|
||||
groups: [ Jumpers ]
|
||||
highlight: true
|
||||
BT1:
|
||||
description: CR2032 battery holder
|
||||
groups: [ ]
|
||||
highlight: true
|
||||
J11:
|
||||
description: Raspberry Pi compatible Mini-GPIO header
|
||||
groups: [ Headers ]
|
||||
pins:
|
||||
'1':
|
||||
name: +3.3 V
|
||||
description: ''
|
||||
groups: []
|
||||
'2':
|
||||
name: +5 V
|
||||
description: ''
|
||||
groups: []
|
||||
'3':
|
||||
name: SDA/GPIO2
|
||||
description: ''
|
||||
groups: []
|
||||
'4':
|
||||
name: +5 V
|
||||
description: ''
|
||||
groups: []
|
||||
'5':
|
||||
name: SCL/GPIO3
|
||||
description: ''
|
||||
groups: []
|
||||
'6':
|
||||
name: GND
|
||||
description: ''
|
||||
groups: []
|
||||
'7':
|
||||
name: GPIO4
|
||||
description: ''
|
||||
groups: []
|
||||
'8':
|
||||
name: TXD/GPIO14
|
||||
description: ''
|
||||
groups: []
|
||||
'9':
|
||||
name: GND
|
||||
description: ''
|
||||
groups: []
|
||||
'10':
|
||||
name: RXD/GPIO15
|
||||
description: ''
|
||||
groups: []
|
||||
highlight: true # Make the component active
|
||||
highlightBoth: true
|
||||
groups:
|
||||
Jumpers:
|
||||
Headers:
|
||||
Connectors:
|
||||
LEDs:
|
||||
Buttons:
|
||||
181
Yellow_Standard_Pinion_Front.yaml
Normal file
181
Yellow_Standard_Pinion_Front.yaml
Normal file
@@ -0,0 +1,181 @@
|
||||
name: Home Assistant Yellow front
|
||||
description: Top side of Home Assistant Yellow
|
||||
components:
|
||||
U1:
|
||||
description: Compute Module 4 board-to-board connector
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
U11:
|
||||
description: |
|
||||
[Silicon Labs MGM210P](https://www.silabs.com/wireless/zigbee/efr32mg21-series-2-modules) wireless radio.
|
||||
|
||||
Zigbee/Thread capable IEEE 802.15.4 radio connected to the CM4 via UART.
|
||||
|
||||
Available on `/dev/ttyAMA1`, typical baud rate is 115200 with hardware
|
||||
flow control.
|
||||
highlight: true
|
||||
J1:
|
||||
description: Power DC 12 V / 2 A (5.1/2.1 mm barrel connector)
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
J2:
|
||||
description: |
|
||||
Gigabit Ethernet connector (RJ45)
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
J3:
|
||||
description: |
|
||||
USB-C connector (USB 2.0 device only)
|
||||
|
||||
Depending on JP1 configuration, this connector allows to:
|
||||
|
||||
* UART: Access the serial console via USB to UART connector. See the following guides on how to use the serial console:
|
||||
* [Using the serial console for debugging (Windows)](/guides/use-serial-console-windows/)
|
||||
* [Using the serial console for debugging (Linux)](/guides/use-serial-console-linux/)
|
||||
* USB: Access the CM4 as a USB device (e.g. for recovery)
|
||||
* [How to re-install the operating system](/guides/reinstall-os/)
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
J4:
|
||||
description: 2 x USB 2.0 Host connector
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
J5:
|
||||
description: |
|
||||
3.5 mm analog audio jack, line-out (2 V RMS)
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
SW1:
|
||||
description: |
|
||||
Power Button
|
||||
|
||||
When Home Assistant OS is running, press and hold for 5 s to power off the
|
||||
system.
|
||||
groups: [ Buttons ]
|
||||
highlight: true
|
||||
SW2:
|
||||
description: |
|
||||
Wipe Button
|
||||
|
||||
Allows you to wipe all user data from your Home Assistant OS installation.
|
||||
Press and hold until the yellow LED starts blinking to initiate a user
|
||||
data wipe.
|
||||
|
||||
To delete all boot\nfiles from the internal eMMC or NVMe, hold this button
|
||||
and the power button simultaneously. This allows you to reinstall HAOS using
|
||||
the Home Assistant OS Installer for Yellow.
|
||||
groups: [ Buttons ]
|
||||
highlight: true
|
||||
SW3:
|
||||
description: |
|
||||
USB boot mode button. Allows recovery via USB-C (J3).
|
||||
|
||||
Pressing this button will force the CM4 into USB boot mode. See J3 for
|
||||
more details.
|
||||
|
||||
This jumper allows to force nRPIBOOT to GND.
|
||||
|
||||
groups: [ Buttons ]
|
||||
highlight: true
|
||||
J12:
|
||||
description: |
|
||||
M.2 B-Key connector.
|
||||
|
||||
Note: This conector only has power and 1xPCIe Gen 2 connected.
|
||||
groups: [ Connectors ]
|
||||
highlight: true
|
||||
D4:
|
||||
description: |
|
||||
Power LED (red)
|
||||
|
||||
See the [Home Assistant Yellow LEDs](/guides/yellow-leds/) documentation for a
|
||||
detailed description of the meaning of their blinking patterns.
|
||||
groups: [ LEDs ]
|
||||
highlight: true
|
||||
D5:
|
||||
description: |
|
||||
Activity LED (green)
|
||||
|
||||
See the [Home Assistant Yellow LEDs](/guides/yellow-leds/) documentation for a
|
||||
detailed description of the meaning of their blinking patterns.
|
||||
groups: [ LEDs ]
|
||||
highlight: true
|
||||
D6:
|
||||
description: |
|
||||
Status LED (yellow)
|
||||
|
||||
See the [Home Assistant Yellow LEDs](/guides/yellow-leds/) documentation for a
|
||||
detailed description of the meaning of their blinking patterns.
|
||||
groups: [ LEDs ]
|
||||
highlight: true
|
||||
D25:
|
||||
description: |
|
||||
Radio LED (blue)
|
||||
|
||||
See the [Home Assistant Yellow LEDs](/guides/yellow-leds/) documentation for a
|
||||
detailed description of the meaning of their blinking patterns.
|
||||
groups: [ LEDs ]
|
||||
highlight: true
|
||||
JP1:
|
||||
description: |
|
||||
USB-C functionality selector
|
||||
|
||||
Selects the functionality of the USB-C connector. See J3 for more details.
|
||||
groups: [ Jumpers ]
|
||||
highlight: true
|
||||
BT1:
|
||||
description: CR2032 battery holder
|
||||
groups: [ ]
|
||||
highlight: true
|
||||
J11:
|
||||
description: Raspberry Pi compatible Mini-GPIO header
|
||||
groups: [ Headers ]
|
||||
pins:
|
||||
'1':
|
||||
name: +3.3 V
|
||||
description: ''
|
||||
groups: []
|
||||
'2':
|
||||
name: +5 V
|
||||
description: ''
|
||||
groups: []
|
||||
'3':
|
||||
name: SDA/GPIO2
|
||||
description: ''
|
||||
groups: []
|
||||
'4':
|
||||
name: +5 V
|
||||
description: ''
|
||||
groups: []
|
||||
'5':
|
||||
name: SCL/GPIO3
|
||||
description: ''
|
||||
groups: []
|
||||
'6':
|
||||
name: GND
|
||||
description: ''
|
||||
groups: []
|
||||
'7':
|
||||
name: GPIO4
|
||||
description: ''
|
||||
groups: []
|
||||
'8':
|
||||
name: TXD/GPIO14
|
||||
description: ''
|
||||
groups: []
|
||||
'9':
|
||||
name: GND
|
||||
description: ''
|
||||
groups: []
|
||||
'10':
|
||||
name: RXD/GPIO15
|
||||
description: ''
|
||||
groups: []
|
||||
highlight: true # Make the component active
|
||||
highlightBoth: true
|
||||
groups:
|
||||
Jumpers:
|
||||
Headers:
|
||||
Connectors:
|
||||
LEDs:
|
||||
Buttons:
|
||||
Reference in New Issue
Block a user