7 Commits

Author	SHA1	Message	Date
Stefan Agner	71aa37cac9	Bump Amber revision to 1.0 ... Make sure all drawings are set to 1.0. Update Board stackup (colors) and add tables to comment layer. Signed-off-by: Stefan Agner <stefan@agner.ch>	2021-08-30 01:03:36 +02:00
Stefan Agner	68c4f1f7e6	Update/add silkscreen graphics ... Add SVG source files of silk screen graphics. Update them to fit the latest layout. Move TP13 to avoid disturbing the text. Signed-off-by: Stefan Agner <stefan@agner.ch>	2021-08-29 22:50:55 +02:00
Stefan Agner	a6b400a016	Cleanup parts silkscreen ... Cleanup part reference silkscreen. Change D6 <=> D24 to make the three LEDs to be numbered in a row. Signed-off-by: Stefan Agner <stefan@agner.ch>	2021-08-29 21:38:47 +02:00
Dominik Sliwa	fe1b207586	PoE.kicad_sch: fix Vss and remove vss-gnd1 diode ... Vss was pointing to general GND. Diode is not used int PSR topology. Signed-off-by: Dominik Sliwa <dominik@sliwa.io>	2021-08-24 01:12:00 +02:00
Dominik Sliwa	792c242592	Changes to PoE for EMI compliance and improved efficiency ... PoE -Added a common mode filter on the input -FB filter on the output side -12V in now disables the poe with the DEN pin -DT is now disabled -PSRS is now disabled -move to 1210 resistors for resistors identified in thermal testing -DTHR is now enabled in default BoM -some resistor values were adjusted -some caps were moved to the common power supply section USB: -USB Hub 1.8V rail have capacitors added Signed-off-by: Dominik Sliwa <dominik@sliwa.io>	2021-08-18 00:36:27 +02:00
Stefan Agner	d9b75ad90b	Relayout new design ... - Update PCB from Schematics - Move SD-card to bottom side of the PCB - Place LEDs in front of CM4 - Add additional LEDs (Amber/Radio) - Move LP5569 to the left - Remove all holes - Lock through holes which should not be moved Fixes: #33 Signed-off-by: Stefan Agner <stefan@agner.ch>	2021-08-15 01:02:49 +02:00
Stefan Agner	696233c284	Renmae LightBlue to Amber ... Signed-off-by: Stefan Agner <stefan@agner.ch>	2021-08-12 20:20:45 +02:00