-Snubber circuit under ecrtail load condition can dissipate more power
then the resistor can handle, increased the resistor size and added one
more in parallel
-Increased size of some of the 12V input capacitors
-Use 3.3Vp instead of 3.3V generated by the RPi for LED, RTC, Radio, Fan
control and RPi reduced hat connector
-PoE pri/sec capacitor value changed
Signed-off-by: Dominik Sliwa <dominik@sliwa.io>
decreased coupling between poe lines and the gnd plane
added vias to stich main gnd planes
decreased the peak current through the transformer
inductor based pi filter on the poe output
decreased coupling to gnd of the poe "noise path"
added parallel mosfet capacitance to poe
moved fb line fo the dcdcs away from inductors
Signed-off-by: Dominik Sliwa <dominik@sliwa.io>
In order to accomodate the C93 next to the transformer.
Added top layer GND1 pour under the transformer
shortened the GNDS path.
Signed-off-by: Dominik Sliwa <dominik@sliwa.io>
Cleanup some fill zones.
Updated the Transformer symbol with pin 4, connected to +48V for better
zone fill.
fixed top/bottom transition for the DC_IN_F
Added some gnd vias
Signed-off-by: Dominik Sliwa <dominik@sliwa.io>
Modified PoE layout to account for GNDS-GND1 flow
and repositioned the noise retern capacitor.
Snubber was corrected for the transformer used and the switching
frequency. Some components were removed.
PoE Input filter was adjusted.
3.3 and 5V DCDC capacitor layout was optimised and unused components
were removed.
Signed-off-by: Dominik Sliwa <dominik@sliwa.io>
