salfter/Coleman_Cooler_Hinge
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

initial commit

Browse Source
This commit is contained in:
Scott Alfter
2019-04-03 08:54:05 -07:00
commit 9d3a874929
5 changed files with 47 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
LICENSE.txt Normal file
View File

@@ -0,0 +1,3 @@
Coleman Cooler Hinge (https://www.thingiverse.com/thing:2931045) by Kingmiwok is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

BIN
R2Coleman_Cooler_Hinge.stl Normal file
View File

Binary file not shown.

BIN
R2_BottomColeman_Cooler_Hinge.stl Normal file
View File

Binary file not shown.

41
README.md Normal file
View File

@@ -0,0 +1,41 @@
.: :,
,:::::::: ::` ::: :::
,:::::::: ::` ::: :::
.,,:::,,, ::`.:, ... .. .:, .:. ..`... ..` .. .:, .. :: .::, .:,`
,:: ::::::: ::, ::::::: `:::::::.,:: ::: ::: .:::::: ::::: :::::: .::::::
,:: :::::::: ::, :::::::: ::::::::.,:: ::: ::: :::,:::, ::::: ::::::, ::::::::
,:: ::: ::: ::, ::: :::`::. :::.,:: ::,`::`::: ::: ::: `::,` ::: :::
,:: ::. ::: ::, ::` :::.:: ::.,:: :::::: ::::::::: ::` :::::: :::::::::
,:: ::. ::: ::, ::` :::.:: ::.,:: .::::: ::::::::: ::` :::::::::::::::
,:: ::. ::: ::, ::` ::: ::: `:::.,:: :::: :::` ,,, ::` .:: :::.::. ,,,
,:: ::. ::: ::, ::` ::: ::::::::.,:: :::: :::::::` ::` ::::::: :::::::.
,:: ::. ::: ::, ::` ::: :::::::`,:: ::. :::::` ::` :::::: :::::.
::, ,:: ``
::::::::
::::::
`,,`
https://www.thingiverse.com/thing:2931045
Coleman Cooler Hinge by Kingmiwok is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/
# Summary
Great design but I wanted a few modifications.
- I thinned the section where the mounting screw goes, so I could use the original screws and still have thread engagement similar to the original hinge.
- I made a new bottom-side hinge by extending the length of the hinge. I found the original length was pivoting at the mounting bolts when it was holding the lid open. A longer length seemed to stabilize it.
- I reshaped it slightly since I was already editing the model.
As the photo shows, I didn't have hinge pins/bolts, so I used a piece of 12 gauge insulated copper wire (out of a piece of scrap Romex) and bent it to shape. It's been in use for a number of months in Hawaii, and no problems. (Bonus: The copper wire won't rust, like even cheap stainless hardware will here.)
# Print Settings
Printer: Anet A6
Rafts: No
Supports: No
Resolution: 0.16
Infill: 50%
Notes:
Printed with PLA.

3
SOURCES.txt Normal file
View File

@@ -0,0 +1,3 @@
Sources for Coleman Cooler Hinge
coleman cooler replacement hinge part (my cooler has wheels one with wheels and screw spacing of 1.5 inches) (https://www.thingiverse.com/thing:1944341)