luc
98c9eb7a04
sync with devt branch
2016-04-08 17:49:21 +02:00
Luc
9885d2cab9
Fix issues with 2.1.0
...
break compatibility with 2.0.0
2016-02-28 01:00:41 +01:00
Luc
e4af1950eb
Allow to disable TCP data feature
...
minor fixes:
-Correct logic for web ports due to refactoring
-Duplicate data read from serial if multiple clients
-Improve reliability to reconnect to AP after a restart
-Typo issues
2016-02-02 17:34:15 +08:00
Luc
70228adb3d
Code formating using astyle --style=otbs *.h *.cpp *.ino
...
To get nice looking code with a minimum effort
2016-01-25 23:38:26 +08:00
Luc
326ef1c261
Fix typo issues
...
Thanks @treepleks
2016-01-19 16:07:47 +08:00
luc
627052ceeb
Add basic authentification and OTA update
...
only web update is supported
2015-11-14 21:48:35 +08:00
luc
a8fd5e06b6
Fix the ESP crash after first flash
...
seems wifi_set_phy_mode need to be set before anything
2015-11-02 19:26:47 +08:00
luc
b2f8ab93bc
Change EEPROM begin/end to be sure it is open
...
Update print_config
2015-10-22 21:38:52 +08:00
luc
65ec16f4d5
Add RESET/CONFIG/SAFEMODE to command line
...
[ESP444]RESET will set default values to EEPROM and restart module
[ESP444]CONFIG will display EEPROM but password
[ESP444]SAFEMODE will switch to safe mode = default mode but without
modifying EEPROM and no restart
2015-10-21 20:38:07 +08:00
luc
7379ac580d
Complete rewrite using template and SPIFFS
...
change to V0.4
2015-10-16 17:49:04 +08:00
luc
10e3cf1674
Fix typo issue - bad copy and past SIG
2015-10-09 22:28:46 +08:00
luc
61ee21a423
Use better ESP8266 check to compile on all ESP8266
...
as now I can test on NodeMCU 1.0 also
2015-10-02 12:25:43 +08:00
luc
d663f62605
Better restart
...
Add 30s progress to ensure restart is finished
Hide restart boot loader message redirecting serial output
2015-09-16 17:46:36 +08:00
Luc
283270f660
Add support for captive portal
...
Need to comment DEBUG and DEBUG_OUTPUT in DNSServer.cpp
2015-09-07 21:26:31 +08:00
Luc
9c04635e15
Enable mDNS for SoftAP
...
as now feature is working
2015-09-07 20:07:02 +08:00
luc
57b6fb2131
Remove yield calls
...
they are useless and may bring some conflict in loop
2015-09-02 15:10:32 +08:00
luc
e281d1073f
Use FPSTR instead of progmem2char
2015-09-02 13:23:56 +08:00
luc
82cadd9ed8
Rearrange headers and add SPI.h in esp8266.ino
...
as seems necessary with latest staging module
remove yield in main loop as seems
2015-08-13 11:35:08 +08:00
luc
a18f924153
Add time to flush all clients when restarting
...
by using a light page without css to load
2015-08-06 12:19:24 +08:00
Luc
2c027d81f7
Add SSDP Support
...
SSDP protocol work outo the box with window
Module is seen as "ESP Module" serial is Chip ID, and other information
are espressif ones for ESP 01
Not sure if need to set module name in EEPROM to be configurable =>TBD
2015-07-25 05:51:01 +08:00
Luc
9e90ef38b8
Update mDNS with latest version and display IP
...
Use M117 if any error
2015-07-25 01:53:53 +08:00
Luc
c9c41cb3ad
Add 250000 baud rate support
...
as arduino IDE support it
2015-07-24 23:49:26 +08:00
luc
3aedb9c019
Send M105 only if no temperature is sent
...
so went printer is heating and automaticaly send temperature no M105 is
necessary
Add some yield() to avoid possible WD triggered
2015-07-13 11:49:20 +08:00
Luc
1046cd2201
Add backbone for command interpretation
...
no filtering, command pass from SERIAL to TCP, and TCP to SERIAL, but
are also stored to check if there is a [ESPXXX]<param>\n where XXX are
command number and <param> is a sequence of parameters ended by a \n
2015-06-08 21:30:19 +08:00
luc
e87497726a
change int to long for baud
...
both are 4 bytes size but long is more adapted
2015-06-05 09:34:00 +08:00
Luc
026fba1b3e
Allow to change web port and data ports
...
System configuration web page allows to change web port and data port
2015-06-03 20:44:21 +08:00
luc
9a88756b20
Add bridge support based on WifiTelnetToSerial
...
Remove useless datainterface files
2015-06-03 15:53:20 +08:00
luc
9aaa045347
Add page to configure Access Point
...
Fix wrong size for SSID/password
Add minimum size for easy change
Workaround missing strncpy_P missig issue
2015-05-29 20:35:08 +08:00
luc
f48e419e0f
Use PROGMEM and F() properly
...
Add function to be able to access to strings stored with PROGMEM, it
save 4k memory vs no usage of PROGMEM
2015-05-27 17:08:47 +08:00
luc
364e37f5ba
Update EEPROM content for new settings
...
Modify EEPROM content to reflect the possible settings
Add a buffer format function to query/write EEPROM instead of always
using string function to save space.
Update Reset/Print Configuration with new settings
Code Cleaning
Some settings stay default as no real add value currently to allow to
change them
2015-05-13 21:58:26 +08:00
luc lebosse
29339aee3c
Add Compilation Condition for mDNS
...
Add Compilation Condition for mDNS as not mandatory
2015-04-21 11:19:29 +08:00
luc lebosse
d90932a7cb
Add mDNS feature in main loop
...
Add mDNS feature in main loop
2015-04-21 10:40:39 +08:00
luc lebosse
95ffb53b3e
Move FW version anf Git link to config.h
...
Move FW version anf Git link to config.h
2015-04-20 20:37:49 +08:00
luc lebosse
6365055734
Move page Handle definition to class constructor
...
to avoid to setup handle function for web requests in main setup -
define handles function in class creator
2015-04-18 19:59:22 +08:00
luc lebosse
c74d8235dd
Remove Bridge/front end split
...
as can listen 2 ports can do both together no need to split - so remove
settings and pin
2015-04-18 19:09:32 +08:00
luc lebosse
5b9f3835b9
Add backbone for Web interface and Data Interface
...
Web Server listen on port 80
Data Bridge listen on port 8888 may need to allow configuration of this
port in settings - TBD
2015-04-17 23:02:28 +08:00
luc lebosse
01e1bcb727
First Code Commit
...
Basic Setting Function Save/Read from EEPROM
Connection to wifi according settings in EEPROM
Recovery Mode using GPIO2 just after module start to reset settings
2015-04-16 22:03:37 +08:00
