working on doc

getting_started.md

@@ -8,7 +8,7 @@ Congratulations on your new toy! Here is a short guide on how to use your USB4VC
 
 ## Prepare SD card
 
-A Micro SD card at least 4GB in size is needed. A fast card will reduce boot time.
+You need a Micro SD card at least 4GB in size. A fast card will reduce boot time.
 
 [Download the latest boot image here](https://github.com/dekuNukem/USB4VC/releases/latest), expand the zip file.
 
@@ -18,7 +18,6 @@ Select your SD card, then the image file, then press `START` to begin writing.
 
 ![Alt text](photos/rufus.png)
 
-
 ## Test out Raspberry Pi
 
 This step is optional, but it's good practice to make sure your Raspberry Pi works first. 
@@ -89,7 +88,7 @@ Also plug in any USB Keyboard, Mouse, and Gamepad into the Raspberry Pi.
 
 If using Bluetooth, we can pair it later.
 
-## USB4VC Power On
+## Powering On
 
 With cables connected, power up USB4VC with a USB-C cable.
 
@@ -97,14 +96,12 @@ You can do it from Baseboard, Protocol Card, or even RPi itself. All will work!
 
 ![Alt text](photos/powerports.jpeg)
 
-After a few seconds, the OLED screen should light up, showing **home screen**:
+After around 15 seconds, the OLED screen should light up, showing **home screen**:
 
 ![Alt text](photos/oledhome.jpeg)
 
 Press `+` or `-` to switch pages, and `enter` button to enter the submenu.
 
-If you have a Bluetooth device, you can pair it in the "Pair Bluetooth" menu.
-
 ## Protocol Setup
 
 Looking at home screen, if displayed protocol is what you want, you're good to go!
@@ -115,6 +112,12 @@ Otherwise, press `Enter` button to adjust protocols, mouse sensitivity, and game
 
 It is recommended to leave the mouse and gamepads adjustments at default, and change them inside the OS or game first. Only do it on USB4VC if that's not possible.
 
+## Pair Bluetooth
+
+Select "Pair Bluetooth":
+
+
+
 ## Try it out!
 
 With protocol set up, and cable connected, time to power on the computer!