salfter/fluxengine
1
0
Fork 0
mirror of https://github.com/davidgiven/fluxengine.git synced 2025-10-31 11:17:01 -07:00
Code Issues Packages Projects Releases Wiki Activity

Correct board pinout instructions.

Browse Source
This commit is contained in:
David Given
2019-02-24 15:53:09 +01:00
parent 649c571f81
commit a0eea73e3d
1 changed files with 10 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
doc/index.md
View File

@@ -178,12 +178,17 @@ make it fit on the back of a floppy disk drive. Using pins instead means this
isn't necessary, but, well, now it's too late.)
1. **If you're using a header:** solder your 17-way header to the
**bottom** of the board, from 2.7 to 1.0 inclusive. (It has to be
**bottom** of the board, from 2.7 to 1.7 inclusive. (It has to be
the bottom because there are components that stick out on the other side
and the bottom needs to go flush against the drive.)
3. **If you're using pins:** solder your 17-way pins to **either side** of
the board, from 2.7 to 1.0 inclusive.
2. **If you're using an IDC header plug:** solder it to the **top** of
the board, notch up, with the _top_ row of pins overhanging the edge
of the board (so that pin 1 is disconnected). Pin 2 should be in board
pin 2.7, and pin 34 in baord pin 1.7.
3. **If you're using bare pins:** solder your 17-way pin header
to **either side** of the board, from 2.7 to 1.7 inclusive.
4. Solder two wires to any convenient VDD and GND pins and connect these to
your floppy disk drive's power supply. If you're powering the floppy
@@ -243,9 +248,9 @@ touch](https://github.com/davidgiven/fluxengine/issues/new).
So you have client software, programmed the firmware, and the hardware is all
ready. What next?
1. Attach the FluxEngine to your floppy disk drive. Pin 0.2 (on the right in
1. Attach the FluxEngine to your floppy disk drive. Pin 2.7 (on the right in
the picture above) is REDWC and connects to pin 2 on the floppy drive.
Pin 1.0 (on the left in the picture above) is DSKCHG and connects to pin
Pin 1.7 (on the left in the picture above) is DSKCHG and connects to pin
34 on the floppy drive. All the other board pins connect in the obvious
order. Odd pins on the floppy drive are left unconnected. You can push
the floppy drive connector straight onto the pins, or the FluxEngine