Added Micropendous5 board which has an Arduino Style Layout. Board is not yet complete.

Micropendous/Design/Micropendous5_Arduino_Pinout/Micropendous5-BillOfMaterials.txt

@@ -0,0 +1,48 @@
+Not yet complete.
+
+This Bill of Materials is for the DIP version of the board but may be useful.
+Open the project in KiCAD and refer to footprint values in CVpcb.
+Only USB resistors need to be 1% or better.
+Most parts are standard.
+
+PJ-102A is the Power connector
+AOD417 is the SOT223 P-CH MOSFET
+74AHC573/74VHC573
+Crystal is HC49US +/- 50ppm or better
+Switches can be TL59AQ
+
+EESchema (20090216-final)  >> Creation date: 4/14/2009 1:50:20 PM
+#Cmp ( order = Reference )
+  Ref#  Value           Footprint          Digi-Key Part#          Unit Cost (USD)
+  ~~~   ~~~~~           ~~~~~~~~~          ~~~~~~~~~~~~~~          ~~~~~~~~~~~~~~~
+| CR3 ; ESD_ZENER     ; 0603             ; 
+| IC1 ; AT90USB???7   ; TQFP64           ; AT90USB1287-AU-ND     ; 9.450
+| IC3 ; ISL54200IRZ   ; SON10_DRC        ; ISL54200IRZ-ND        ; 1.463
+| IC4 ; 74AHC573      ; TSSOP20_PW       ; 74VHC573MTCXCT-ND     ; 0.378
+| IC5 ; CY7C1019D     ; TSOPII32         ; 428-1965-ND           ; 2.520
+| L1  ; Ferrite       ; 0805             ; 
+| P15 ; USB-B/^A      ; SIL-2-0.1"-F     ; S7035-ND              ; 0.229
+| R   ; 0             ; 0805             ; RMCF1/100RCT-ND       ; 0.105
+| SW1 ; RESET         ; 6.5x6x3.1mm_EVQ  ; P12955SCT-ND          ; 0.296
+| SW2 ; HWB           ; 6.5x6x3.1mm_EVQ  ; P12955SCT-ND          ; 0.296
+| U1  ; USB-miniB     ; MiniB-5pos       ; H2959CT-ND            ; 0.853
+| U2  ; USB-A         ; USB-A
+| U4  ; JTAG          ; DIL-0.1"-2x5-M   ; 609-3243-ND           ; 0.350
+------------------------------------------------------------Total:
+#End Cmp
+#End List
+
+#Notes: -Unit costs based on minimum orders of 25 components.
+        -Headers are bought as large pieces and seperated,
+         hence the fraction after each breakable header
+        -populate R4 to enable OTG for AT90USB???7, but then do not use pin PE3
+	-operation at 3.3V requires 8MHz crystal - ABM7-8.000MHZ-D2Y-T
+	-if populating SRAM and running at 5V use 16MHz crystal - ABM7-16.000MHZ-D2Y-T
+	-if populating SRAM (IC4,IC5), regulator ST1L05B (IC2) and associated
+         components (R11,R12,C22,C26,D1) are uneccessary as SRAM requires 5V operation
+	-CR1,CR2,R13,R14 can be populated instead of USB Switch (IC3,R10,R16) if
+         using the AT90USB???6 as these ICs do not have host capability
+	-Vcc_Sel (K1) is only required if using the regulator (IC2).  Can just short
+         center and 5V pin to force 5V operation when using SRAM IC (IC4,IC5)
+	-MBR120VLSF can be replaced with MBRX120LF in SOD123-compatible package
+	-74AHC573 can be replaced with 74VHC573 in TSSOP20 package

Micropendous/Design/Micropendous5_Arduino_Pinout/Micropendous5.cache.dcm

@@ -0,0 +1,41 @@
+EESchema-DOCLIB  Version 2.0  2/6/2010 4:59:23 AM
+#
+$CMP C_MINI
+K Unpolarized Capacitor
+$ENDCMP
+#
+$CMP CONN_1
+D 1 pin
+K CONN
+$ENDCMP
+#
+$CMP CONN_2
+D Symbole general de connecteur
+K CONN
+$ENDCMP
+#
+$CMP CONN_8
+D Symbole general de connecteur
+K CONN
+$ENDCMP
+#
+$CMP CONN_8X2
+D ymbole general de connecteur
+K CONN
+$ENDCMP
+#
+$CMP ESD_Zener
+D Double Shottky Diode - Common Cathodes
+K DEV DIODE
+$ENDCMP
+#
+$CMP TLV1117
+D LDO
+K POWER REGUL
+$ENDCMP
+#
+$CMP TXB0108
+K Voltage Level Translator TXS0108 ADG3300 MAX3002 TXB0108
+$ENDCMP
+#
+#End Doc Library

Micropendous/Design/Micropendous5_Arduino_Pinout/Micropendous5.cache.lib

@@ -0,0 +1,657 @@
+EESchema-LIBRARY Version  2/6/2010 4:59:23 AM
+#
+#
+# 74VHC573
+#
+DEF 74VHC573 IC? 0 40 Y Y 1 F N
+F0 "IC?" -300 -600 60 H V C CNN
+F1 "74VHC573" 250 -600 45 H V C CNN
+DRAW
+S 400 550 -400 -550 0 1 2 f
+X VCC 20 0 750 200 D 60 60 0 0 W
+X Q7 12 600 -200 200 L 60 60 1 1 T
+X Q6 13 600 -100 200 L 60 60 1 1 T
+X Q5 14 600 0 200 L 60 60 1 1 T
+X Q4 15 600 100 200 L 60 60 1 1 T
+X Q3 16 600 200 200 L 60 60 1 1 T
+X Q2 17 600 300 200 L 60 60 1 1 T
+X Q1 18 600 400 200 L 60 60 1 1 T
+X Q0 19 600 500 200 L 60 60 1 1 T
+X ^OE 1 -600 -500 200 R 60 60 1 1 I I
+X Load 11 -600 -400 200 R 60 60 1 1 I
+X D7 9 -600 -200 200 R 60 60 1 1 I
+X D6 8 -600 -100 200 R 60 60 1 1 I
+X D5 7 -600 0 200 R 60 60 1 1 I
+X D4 6 -600 100 200 R 60 60 1 1 I
+X D3 5 -600 200 200 R 60 60 1 1 I
+X D2 4 -600 300 200 R 60 60 1 1 I
+X D1 3 -600 400 200 R 60 60 1 1 I
+X D0 2 -600 500 200 R 60 60 1 1 I
+X GND 10 0 -750 200 U 60 60 0 0 W
+ENDDRAW
+ENDDEF
+#
+# at90usb128
+#
+DEF at90usb128 IC 0 40 Y Y 1 F N
+F0 "IC" -1050 1950 50 H V C CNN
+F1 "at90usb128" 850 1950 50 H V C CNN
+ALIAS at90usb64
+DRAW
+S -1150 1900 1150 -1850 0 1 2 f
+X VCC 52 -50 2150 250 D 50 50 1 1 W
+X VCC 21 50 2150 250 D 50 50 1 1 W
+X PA0(AD0) 51 1400 -1750 250 L 50 50 1 1 P
+X PA1(AD1) 50 1400 -1650 250 L 50 50 1 1 P
+X PA2(AD2) 49 1400 -1550 250 L 50 50 1 1 P
+X PA3(AD3) 48 1400 -1450 250 L 50 50 1 1 P
+X PA4(AD4) 47 1400 -1350 250 L 50 50 1 1 P
+X PA5(AD5) 46 1400 -1250 250 L 50 50 1 1 P
+X PA6(AD6) 45 1400 -1150 250 L 50 50 1 1 P
+X PA7(AD7) 44 1400 -1050 250 L 50 50 1 1 P
+X PC0(A8) 35 1400 -800 250 L 50 50 1 1 P
+X PC1(A9) 36 1400 -700 250 L 50 50 1 1 P
+X PC2(A10) 37 1400 -600 250 L 50 50 1 1 P
+X PC3(A11/T3) 38 1400 -500 250 L 50 50 1 1 P
+X PC4(A12/OC.3C) 39 1400 -400 250 L 50 50 1 1 P
+X PC5(A13/OC.3B) 40 1400 -300 250 L 50 50 1 1 P
+X PC6(A14/OC.3A) 41 1400 -200 250 L 50 50 1 1 P
+X PC7(A15/ICP3/CLK0) 42 1400 -100 250 L 50 50 1 1 P
+X PE0(^WR) 33 1400 150 250 L 50 50 1 1 P
+X PE1(^RD) 34 1400 250 250 L 50 50 1 1 P
+X PE2(ALE/^HWB) 43 1400 350 250 L 50 50 1 1 P
+X PE3(IUID) 9 1400 450 250 L 50 50 1 1 P
+X PE4(INT4/TOSC1) 18 1400 550 250 L 50 50 1 1 P
+X PE5(INT5/TOSC2) 19 1400 650 250 L 50 50 1 1 P
+X PE6(INT6/AIN0) 1 1400 750 250 L 50 50 1 1 P
+X PE7(INT7/AIN1/UVcon) 2 1400 850 250 L 50 50 1 1 P
+X PD0(SCL/OC.0B/INT0) 25 1400 1100 250 L 50 50 1 1 P
+X PD1(SDA/OC.2B/INT1) 26 1400 1200 250 L 50 50 1 1 P
+X PD2(RXD1/INT2) 27 1400 1300 250 L 50 50 1 1 P
+X PD3(TXD1/INT3) 28 1400 1400 250 L 50 50 1 1 P
+X PD4(ICP1) 29 1400 1500 250 L 50 50 1 1 P
+X PD5(XCK1) 30 1400 1600 250 L 50 50 1 1 P
+X PD6(T1) 31 1400 1700 250 L 50 50 1 1 P
+X PD7(T0) 32 1400 1800 250 L 50 50 1 1 P
+X AVCC 64 -1400 -1750 250 R 50 50 1 1 W
+X AREF 62 -1400 -1650 250 R 50 50 1 1 W
+X PF0(ADC0) 61 -1400 -1500 250 R 50 50 1 1 P
+X PF1(ADC1) 60 -1400 -1400 250 R 50 50 1 1 P
+X PF2(ADC2) 59 -1400 -1300 250 R 50 50 1 1 I
+X PF3(ADC3) 58 -1400 -1200 250 R 50 50 1 1 I
+X PF4(ADC4/TCK) 57 -1400 -1100 250 R 50 50 1 1 P
+X PF5(ADC5/TMS) 56 -1400 -1000 250 R 50 50 1 1 P
+X PF6(ADC6/TDO) 55 -1400 -900 250 R 50 50 1 1 P
+X PF7(ADC7/TDI) 54 -1400 -800 250 R 50 50 1 1 P
+X PB0(SS/PCINT0) 10 -1400 -550 250 R 50 50 1 1 P
+X PB1(SCLK/PCINT1) 11 -1400 -450 250 R 50 50 1 1 P
+X PB2(MOSI/PDI/PCINT2) 12 -1400 -350 250 R 50 50 1 1 P
+X PB3(MISO/PDO/PCINT3) 13 -1400 -250 250 R 50 50 1 1 P
+X PB4(PCINT4/OC.2A) 14 -1400 -150 250 R 50 50 1 1 P
+X PB5(PCINT5/OC.1A) 15 -1400 -50 250 R 50 50 1 1 P
+X PB6(PCINT6/OC.1B) 16 -1400 50 250 R 50 50 1 1 P
+X PB7(PCINT7/OC.0A/OC.1C) 17 -1400 150 250 R 50 50 1 1 P
+X UCap 7 -1400 450 250 R 50 50 1 1 P
+X UGND 6 -1400 650 250 R 50 50 1 1 W
+X UVCC 3 -1400 750 250 R 50 50 1 1 W
+X VBus 8 -1400 1050 250 R 50 50 1 1 P
+X D+ 5 -1400 1200 250 R 50 50 1 1 P
+X D- 4 -1400 1300 250 R 50 50 1 1 P
+X XTAL2 24 -1400 1500 250 R 50 50 1 1 P IC
+X XTAL1 23 -1400 1600 250 R 50 50 1 1 P C
+X RESET 20 -1400 1800 250 R 50 50 1 1 P I
+X GND 22 -100 -2100 250 U 50 50 1 1 W
+X GND 53 0 -2100 250 U 50 50 1 1 W
+X GND 63 100 -2100 250 U 50 50 1 1 W
+X GND-PAD 65 350 -2000 150 U 35 35 1 1 W
+ENDDRAW
+ENDDEF
+#
+# C_MINI
+#
+DEF C_MINI C 0 0 N N 1 F N
+F0 "C" -50 40 30 V V C CNN
+F1 "C_MINI" 50 70 25 V V C CNN
+DRAW
+P 3 0 1 0  25 -50  25 50  25 50 f
+P 3 0 1 0  -25 -50  -25 50  -25 50 f
+X B 2 100 0 75 L 25 25 1 1 P
+X A 1 -100 0 75 R 25 25 1 1 P
+ENDDRAW
+ENDDEF
+#
+# CONN_1
+#
+DEF ~CONN_1 P 0 30 N N 1 F N
+F0 "P" 80 0 40 H V L CNN
+F1 "CONN_1" 0 55 30 H I C CNN
+DRAW
+P 2 0 1 0  -30 0  -50 0 N
+C 0 0 31 0 1 0 N
+X 1 1 -150 0 100 R 60 60 1 1 P
+ENDDRAW
+ENDDEF
+#
+# CONN_10X2_Opendous
+#
+DEF CONN_10X2_Opendous P 0 10 Y N 1 F N
+F0 "P" 0 550 60 H V C CNN
+F1 "CONN_10X2_Opendous" 0 -100 50 V V C CNN
+DRAW
+S -100 500 100 -500 0 1 0 N
+X P20 20 400 -450 300 L 60 30 1 1 P I
+X P18 18 400 -350 300 L 60 30 1 1 P I
+X P16 16 400 -250 300 L 60 30 1 1 P I
+X P14 14 400 -150 300 L 60 30 1 1 P I
+X P12 12 400 -50 300 L 60 30 1 1 P I
+X P10 10 400 50 300 L 60 30 1 1 P I
+X P8 8 400 150 300 L 60 30 1 1 P I
+X P6 6 400 250 300 L 60 30 1 1 P I
+X P4 4 400 350 300 L 60 30 1 1 P I
+X P2 2 400 450 300 L 60 30 1 1 P I
+X P19 19 -400 -450 300 R 60 30 1 1 P I
+X P17 17 -400 -350 300 R 60 30 1 1 P I
+X P15 15 -400 -250 300 R 60 30 1 1 P I
+X P13 13 -400 -150 300 R 60 30 1 1 P I
+X P11 11 -400 -50 300 R 60 30 1 1 P I
+X P9 9 -400 50 300 R 60 30 1 1 P I
+X P7 7 -400 150 300 R 60 30 1 1 P I
+X P5 5 -400 250 300 R 60 30 1 1 P I
+X P3 3 -400 350 300 R 60 30 1 1 P I
+X P1 1 -400 450 300 R 60 30 1 1 P I
+ENDDRAW
+ENDDEF
+#
+# CONN_2
+#
+DEF CONN_2 P 0 40 Y N 1 F N
+F0 "P" -50 0 40 V V C CNN
+F1 "CONN_2" 50 0 40 V V C CNN
+DRAW
+S -100 150 100 -150 0 1 0 N
+X PM 2 -350 -100 250 R 60 60 1 1 P I
+X P1 1 -350 100 250 R 60 60 1 1 P I
+ENDDRAW
+ENDDEF
+#
+# CONN_8
+#
+DEF CONN_8 P 0 40 Y N 1 F N
+F0 "P" -50 0 60 V V C CNN
+F1 "CONN_8" 50 0 60 V V C CNN
+DRAW
+S -100 400 100 -400 0 1 0 N
+X P8 8 -350 -350 250 R 50 50 1 1 P I
+X P7 7 -350 -250 250 R 50 50 1 1 P I
+X P6 6 -350 -150 250 R 50 50 1 1 P I
+X P5 5 -350 -50 250 R 50 50 1 1 P I
+X P4 4 -350 50 250 R 50 50 1 1 P I
+X P3 3 -350 150 250 R 50 50 1 1 P I
+X P2 2 -350 250 250 R 50 50 1 1 P I
+X P1 1 -350 350 250 R 50 50 1 1 P I
+ENDDRAW
+ENDDEF
+#
+# CONN_8X2
+#
+DEF CONN_8X2 P 0 40 Y Y 1 F N
+F0 "P" 0 450 60 H V C CNN
+F1 "CONN_8X2" 0 0 50 V V C CNN
+DRAW
+S -100 400 100 -400 0 1 0 N
+X ~ 16 400 -350 300 L 60 60 1 1 P I
+X ~ 14 400 -250 300 L 60 60 1 1 P I
+X ~ 12 400 -150 300 L 60 60 1 1 P I
+X ~ 10 400 -50 300 L 60 60 1 1 P I
+X ~ 8 400 50 300 L 60 60 1 1 P I
+X ~ 6 400 150 300 L 60 60 1 1 P I
+X ~ 4 400 250 300 L 60 60 1 1 P I
+X ~ 2 400 350 300 L 60 60 1 1 P I
+X ~ 15 -400 -350 300 R 60 60 1 1 P I
+X ~ 13 -400 -250 300 R 60 60 1 1 P I
+X ~ 11 -400 -150 300 R 60 60 1 1 P I
+X ~ 9 -400 -50 300 R 60 60 1 1 P I
+X ~ 7 -400 50 300 R 60 60 1 1 P I
+X ~ 5 -400 150 300 R 60 60 1 1 P I
+X ~ 3 -400 250 300 R 60 60 1 1 P I
+X ~ 1 -400 350 300 R 60 60 1 1 P I
+ENDDRAW
+ENDDEF
+#
+# CONN_SD
+#
+DEF CONN_SD U 0 40 Y Y 1 F N
+F0 "U" 0 -700 40 H V C CNN
+F1 "CONN_SD" 0 700 40 H V C CNN
+DRAW
+P 7 0 1 2  200 650  -200 650  -200 -550  -100 -650  200 -650  200 650  200 650 f
+X GND 17 350 100 150 L 30 30 1 1 W
+X GND 16 350 200 150 L 30 30 1 1 W
+X GND 6 350 300 150 L 30 30 1 1 W
+X CD 15 350 500 150 L 30 30 1 1 I
+X WP 14 350 600 150 L 30 30 1 1 I
+X CMD 2 -350 -550 150 R 30 30 1 1 I
+X GND 3 -350 -450 150 R 30 30 1 1 W
+X VCC 4 -350 -350 150 R 30 30 1 1 W
+X CLK 5 -350 -250 150 R 30 30 1 1 I
+X DAT0 7 -350 -100 150 R 30 30 1 1 B
+X DAT1 8 -350 0 150 R 30 30 1 1 B
+X DAT2 9 -350 100 150 R 30 30 1 1 B
+X DAT3 1 -350 200 150 R 30 30 1 1 B
+ENDDRAW
+ENDDEF
+#
+# CRYSTAL
+#
+DEF CRYSTAL X 0 40 N N 0 F N
+F0 "X" 0 150 60 H V C CNN
+F1 "CRYSTAL" 0 -150 60 H V C CNN
+DRAW
+P 5 0 1 12  -50 50  50 50  50 -50  -50 -50  -50 50 f
+P 2 0 1 16  100 100  100 -100 N
+P 2 0 1 16  -100 100  -100 -100 N
+X 2 2 300 0 200 L 40 40 1 1 P
+X 1 1 -300 0 200 R 40 40 1 1 P
+ENDDRAW
+ENDDEF
+#
+# CY7C1019_1MBIT_SRAM
+#
+DEF CY7C1019_1MBIT_SRAM U 0 40 Y Y 1 F N
+F0 "U" -300 -900 40 H V C CNN
+F1 "CY7C1019_1MBIT_SRAM" 0 0 40 V V C CNN
+DRAW
+S 350 850 -350 -850 0 1 2 f
+X VCC 8 -50 1050 200 D 40 40 1 1 W
+X VCC 24 50 1050 200 D 40 40 1 1 W
+X ^WE 12 550 -500 200 L 40 40 1 1 I I
+X ^CE 5 550 -400 200 L 40 40 1 1 I I
+X ^OE 28 550 -300 200 L 40 40 1 1 I I
+X IO7 27 550 100 200 L 40 40 1 1 B
+X IO6 26 550 200 200 L 40 40 1 1 B
+X IO5 23 550 300 200 L 40 40 1 1 B
+X IO4 22 550 400 200 L 40 40 1 1 B
+X IO3 11 550 500 200 L 40 40 1 1 B
+X IO2 10 550 600 200 L 40 40 1 1 B
+X IO1 7 550 700 200 L 40 40 1 1 B
+X IO0 6 550 800 200 L 40 40 1 1 B
+X A16 32 -550 -800 200 R 40 40 1 1 I
+X A15 31 -550 -700 200 R 40 40 1 1 I
+X A14 30 -550 -600 200 R 40 40 1 1 I
+X A13 29 -550 -500 200 R 40 40 1 1 I
+X A12 21 -550 -400 200 R 40 40 1 1 I
+X A11 20 -550 -300 200 R 40 40 1 1 I
+X A10 19 -550 -200 200 R 40 40 1 1 I
+X A9 18 -550 -100 200 R 40 40 1 1 I
+X A8 17 -550 0 200 R 40 40 1 1 I
+X A7 16 -550 100 200 R 40 40 1 1 I
+X A6 15 -550 200 200 R 40 40 1 1 I
+X A5 14 -550 300 200 R 40 40 1 1 I
+X A4 13 -550 400 200 R 40 40 1 1 I
+X A3 4 -550 500 200 R 40 40 1 1 I
+X A2 3 -550 600 200 R 40 40 1 1 I
+X A1 2 -550 700 200 R 40 40 1 1 I
+X A0 1 -550 800 200 R 40 40 1 1 I
+X GND 9 -50 -1050 200 U 40 40 1 1 W
+X GND 25 50 -1050 200 U 40 40 1 1 W
+ENDDRAW
+ENDDEF
+#
+# D_rectifier
+#
+DEF D_rectifier D 0 40 N N 1 F N
+F0 "D" -90 -50 35 V V C CNN
+F1 "D_rectifier" 80 -80 30 V V C CNN
+$FPLIST
+ D?
+ SO*
+ SM*
+ SLP1006P2
+$ENDFPLIST
+DRAW
+P 5 0 1 0  50 0  -50 50  -50 -50  50 0  50 0 F
+P 3 0 1 7  50 50  50 -50  50 -50 N
+X K 1 150 0 100 L 40 40 1 1 P
+X A 2 -150 0 100 R 40 40 1 1 P
+ENDDRAW
+ENDDEF
+#
+# DC_POWER_JACK
+#
+DEF DC_POWER_JACK J 0 40 Y Y 1 F N
+F0 "J" -200 0 40 H V C CNN
+F1 "DC_POWER_JACK" -85 175 25 H V C CNN
+DRAW
+P 3 0 1 0  25 -75  25 0  25 0 F
+P 3 0 1 0  25 0  50 0  50 0 F
+P 5 0 1 0  0 -75  25 -100  50 -75  0 -75  0 -75 F
+P 3 0 1 1  25 120  -200 120  -200 120 N
+S 75 150 -250 -150 0 1 1 N
+A -200 100 20 901 -901 0 1 1 N -200 120 -200 80
+P 3 0 1 1  25 80  -200 80  -200 80 N
+S 50 125 25 75 0 1 1 N
+P 5 0 1 0  -150 -100  -100 -50  -50 -100  50 -100  50 -100 N
+X ~ 2 150 -100 100 L 40 40 1 1 W
+X ~ 3 150 0 100 L 40 40 1 1 W
+X ~ 1 150 100 100 L 40 40 1 1 W
+ENDDRAW
+ENDDEF
+#
+# ESD_Zener
+#
+DEF ~ESD_Zener CR 0 0 N N 1 F N
+F0 "CR" 0 60 30 H V C CNN
+F1 "ESD_Zener" 0 -50 20 H I C CNN
+DRAW
+P 4 0 1 2  0 0  50 25  50 -25  50 -25 F
+P 3 0 1 5  0 20  0 -20  0 -20 F
+P 4 0 1 2  0 0  -50 25  -50 -25  -50 -25 F
+P 3 0 1 5  0 20  20 40  20 40 F
+P 3 0 1 5  0 -20  -20 -40  -20 -40 F
+X cathode 1 100 0 50 L 40 40 0 1 P
+X Anode 2 -100 0 50 R 40 40 0 1 P
+ENDDRAW
+ENDDEF
+#
+# FUSE-MINI
+#
+DEF FUSE-MINI F 0 40 N N 1 F N
+F0 "F" 50 25 20 H V C CNN
+F1 "FUSE-MINI" 0 -75 20 H V C CNN
+DRAW
+A 50 0 50 -1799 -1 0 1 0 N 0 0 100 0
+A -50 0 50 1 1799 0 1 0 N 0 0 -100 0
+X A 1 150 0 50 L 50 50 1 1 P
+X B 2 -150 0 50 R 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# GND
+#
+DEF ~GND #PWR 0 0 Y Y 1 F P
+F0 "#PWR" 0 0 30 H I C CNN
+F1 "GND" 0 -70 30 H I C CNN
+DRAW
+P 4 0 1 4  -50 0  0 -50  50 0  -50 0 N
+X GND 1 0 0 0 U 30 30 1 1 W N
+ENDDRAW
+ENDDEF
+#
+# GNDPWR
+#
+DEF GNDPWR #PWR 0 0 N N 1 F P
+F0 "#PWR" 0 50 40 H I C CNN
+F1 "GNDPWR" 0 -60 25 H V C CNN
+DRAW
+P 3 0 1 10  40 0  -40 0  -40 0 N
+P 4 0 1 8  40 0  30 -30  30 -30  30 -30 N
+P 3 0 1 8  20 0  10 -30  10 -30 N
+P 3 0 1 8  0 0  -10 -30  -10 -30 N
+P 3 0 1 8  -20 0  -30 -30  -30 -30 N
+P 3 0 1 8  -40 0  -50 -30  -50 -30 N
+X GNDPWR 1 0 0 0 U 25 25 1 1 W N
+ENDDRAW
+ENDDEF
+#
+# ISL54200IRZ
+#
+DEF ISL54200IRZ U 0 40 Y Y 1 F N
+F0 "U" -300 -250 50 H V C CNN
+F1 "ISL54200IRZ" -225 250 30 H V C CNN
+DRAW
+S 400 200 -400 -200 0 1 2 f
+X VCC 1 0 400 200 D 40 40 1 1 W
+X HS_D1 9 600 -150 200 L 40 40 1 1 I
+X HS_D2 8 600 -50 200 L 40 40 1 1 I
+X FS_D1 7 600 50 200 L 40 40 1 1 I
+X FS_D2 6 600 150 200 L 40 40 1 1 I
+X COM_D1 3 -600 -150 200 R 40 40 1 1 I
+X COM_D2 4 -600 -50 200 R 40 40 1 1 I
+X IN 2 -600 50 200 R 40 40 1 1 I
+X EN 10 -600 150 200 R 40 40 1 1 I
+X GND 5 -50 -400 200 U 40 40 1 1 W
+X GND-PAD 11 50 -350 150 U 25 25 1 1 W
+ENDDRAW
+ENDDEF
+#
+# JTAG_AVR
+#
+DEF JTAG_AVR U 0 40 Y Y 1 F N
+F0 "U" -250 -300 60 H V C CNN
+F1 "JTAG_AVR" 0 300 60 H V C CNN
+DRAW
+S -300 250 300 -250 0 1 2 f
+X GND 10 500 -200 200 L 50 50 1 1 P
+X nc 8 500 -100 200 L 50 50 1 1 U
+X RESET 6 500 0 200 L 50 50 1 1 P I
+X VCC 4 500 100 200 L 50 50 1 1 P
+X GND 2 500 200 200 L 50 50 1 1 P
+X TDI 9 -500 -200 200 R 50 50 1 1 P
+X VCC 7 -500 -100 200 R 50 50 1 1 P
+X TMS 5 -500 0 200 R 50 50 1 1 P
+X TDO 3 -500 100 200 R 50 50 1 1 P
+X TCK 1 -500 200 200 R 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# L_MINI
+#
+DEF L_MINI L 0 0 N N 1 F N
+F0 "L" -75 -50 30 H V C CNN
+F1 "L_MINI" 50 -50 22 H V C CNN
+DRAW
+A -50 0 25 -1799 -1 0 1 0 N -75 0 -25 0
+A 0 0 25 -1799 -1 0 1 0 N -25 0 25 0
+A 50 0 25 -1799 -1 0 1 0 N 25 0 75 0
+X B 2 100 0 25 L 25 25 1 1 P
+X A 1 -100 0 25 R 25 25 1 1 P
+ENDDRAW
+ENDDEF
+#
+# MOSFET_P_Opendous
+#
+DEF MOSFET_P_Opendous Q 0 40 Y N 0 F N
+F0 "Q" 0 190 30 H V R CNN
+F1 "MOSFET_P_Opendous" 0 -180 30 H V R CNN
+DRAW
+P 3 0 1 2  75 0  100 0  100 0 F
+P 5 0 1 0  175 25  125 -50  225 -50  175 25  175 25 F
+P 3 0 1 2  100 0  100 100  100 100 F
+P 5 0 1 2  25 25  25 -25  75 0  25 25  25 25 F
+P 2 0 1 2  -50 -100  -50 100 N
+P 2 0 1 2  100 100  0 100 N
+P 3 0 1 2  175 -50  175 -100  175 -100 N
+P 4 0 1 2  175 25  175 100  100 100  100 100 N
+P 2 0 1 10  0 -150  0 150 N
+P 2 0 1 2  100 -100  0 -100 N
+P 2 0 1 8  30 0  0 0 N
+P 3 0 1 2  175 -100  100 -100  100 -100 N
+P 3 0 1 4  125 25  225 25  225 25 N
+T 900 75 -175 30 0 0 0 D  Normal 0
+T 900 75 125 30 0 0 0 S  Normal 0
+T 0 -150 125 30 0 0 0 G  Normal 0
+X S 2 100 200 100 D 30 30 1 1 P
+X G 1 -200 100 150 R 30 30 1 1 I
+X D 3 100 -200 100 U 30 30 1 1 P
+ENDDRAW
+ENDDEF
+#
+# R_MINI
+#
+DEF R_MINI R 0 0 N N 1 F N
+F0 "R" -70 50 25 H V C CNN
+F1 "R_MINI" 70 50 20 H V C CNN
+DRAW
+P 3 0 1 0  50 25  75 0  75 0 N
+P 3 0 1 0  -50 25  -75 0  -75 0 N
+P 6 0 1 0  -50 25  -25 -25  0 25  25 -25  50 25  50 25 N
+X A 1 100 0 25 L 25 25 1 1 P
+X B 2 -100 0 25 R 25 25 1 1 P
+ENDDRAW
+ENDDEF
+#
+# SWITCH_PUSHBUTTON
+#
+DEF SWITCH_PUSHBUTTON SW 0 0 N N 1 F N
+F0 "SW" 0 -50 30 H V C CNN
+F1 "SWITCH_PUSHBUTTON" 0 75 25 H V C CNN
+DRAW
+P 3 0 1 1  -64 0  -80 0  -80 0 N
+P 3 0 1 2  100 0  -50 50  -50 50 N
+C -50 0 14 0 1 2 N
+X B 2 150 0 50 L 30 30 1 1 P
+X A 1 -150 0 75 R 30 30 1 1 P
+ENDDRAW
+ENDDEF
+#
+# TLV1117
+#
+DEF TLV1117 U 0 30 Y Y 1 F N
+F0 "U" 150 -196 50 H V C CNN
+F1 "TLV1117" 0 150 40 H V C CNN
+DRAW
+S 200 100 -200 -150 0 1 2 f
+X VO 4 400 -50 200 L 40 40 1 1 w
+X VO 2 400 50 200 L 40 40 1 1 w
+X VI 3 -400 50 200 R 40 40 1 1 I
+X GND 1 0 -250 100 U 40 40 1 1 W
+ENDDRAW
+ENDDEF
+#
+# TXB0108
+#
+DEF TXB0108 U 0 40 Y Y 1 F N
+F0 "U" -250 -600 60 H V C CNN
+F1 "TXB0108" -100 600 60 H V C CNN
+DRAW
+S -300 550 300 -550 0 1 0 f
+P 3 0 0 0  -23 439  12 412  12 412 N
+T 0 160 510 26 0 0 0 1.7-5.5V  Normal 0
+T 0 4 451 60 0 0 0 <  Normal 0
+T 900 0 -75 30 0 0 0 TXS0108~/~ADG3300~/~MAX3002  Normal 0
+T 0 -165 510 26 0 0 0 1.2-3.6V  Normal 0
+X GND 11 600 -450 300 L 50 50 1 1 W
+X B8 12 600 -350 300 L 50 50 1 1 B
+X B7 13 600 -250 300 L 50 50 1 1 B
+X B6 14 600 -150 300 L 50 50 1 1 B
+X B5 15 600 -50 300 L 50 50 1 1 B
+X B4 16 600 50 300 L 50 50 1 1 B
+X B3 17 600 150 300 L 50 50 1 1 B
+X B2 18 600 250 300 L 50 50 1 1 B
+X B1 20 600 350 300 L 50 50 1 1 B
+X VccB 19 600 450 300 L 50 50 1 1 W
+X ^OE 10 -600 -450 300 R 50 50 1 1 I I
+X A8 9 -600 -350 300 R 50 50 1 1 B
+X A7 8 -600 -250 300 R 50 50 1 1 B
+X A6 7 -600 -150 300 R 50 50 1 1 B
+X A5 6 -600 -50 300 R 50 50 1 1 B
+X A4 5 -600 50 300 R 50 50 1 1 B
+X A3 4 -600 150 300 R 50 50 1 1 B
+X A2 3 -600 250 300 R 50 50 1 1 B
+X A1 1 -600 350 300 R 50 50 1 1 B
+X VccA 2 -600 450 300 R 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# USBCONN
+#
+DEF USBCONN U 0 40 Y Y 1 F N
+F0 "U" 50 -300 60 H V C CNN
+F1 "USBCONN" 200 300 40 H V C CNN
+DRAW
+S 0 250 400 -250 0 1 0 f
+X SHIELD 5 -250 -200 250 R 50 50 1 1 W
+X GND 4 -250 -100 250 R 50 50 1 1 W
+X VBUS 1 -250 0 250 R 50 50 1 1 W
+X DN 2 -250 100 250 R 50 50 1 1 B
+X DP 3 -250 200 250 R 50 50 1 1 B
+ENDDRAW
+ENDDEF
+#
+# USBCONN-HostCapable
+#
+DEF USBCONN-HostCapable U 0 40 Y Y 1 F N
+F0 "U" 0 -350 60 H V C CNN
+F1 "USBCONN-HostCapable" 150 325 20 H V C CNN
+DRAW
+S -50 300 350 -300 0 1 2 f
+X ID 6 -300 -250 250 R 50 50 1 1 P
+X SHIELD 5 -300 -150 250 R 50 50 1 1 W
+X GND 4 -300 -50 250 R 50 50 1 1 W
+X VBUS 1 -300 50 250 R 50 50 1 1 W
+X DN 2 -300 150 250 R 50 50 1 1 B
+X DP 3 -300 250 250 R 50 50 1 1 B
+ENDDRAW
+ENDDEF
+#
+# VBUS
+#
+DEF VBUS #PWR 0 0 Y Y 1 F P
+F0 "#PWR" 0 100 30 H I C CNN
+F1 "VBUS" 0 100 30 H V C CNN
+DRAW
+P 3 0 1 4  0 0  0 30  0 30 N
+C 0 50 20 0 1 4 N
+X VBUS 1 0 0 0 U 20 20 0 0 W N
+ENDDRAW
+ENDDEF
+#
+# VDD
+#
+DEF VDD #PWR 0 0 Y Y 1 F P
+F0 "#PWR" 0 100 30 H I C CNN
+F1 "VDD" 0 110 30 H V C CNN
+DRAW
+P 3 0 1 0  0 0  0 40  0 40 N
+C 0 60 20 0 1 0 N
+X VDD 1 0 0 0 U 40 40 0 0 W N
+ENDDRAW
+ENDDEF
+#
+# VDD33
+#
+DEF VDD33 #PWR 0 0 Y Y 1 F P
+F0 "#PWR" 0 100 30 H I C CNN
+F1 "VDD33" 0 100 30 H V C CNN
+DRAW
+P 3 0 1 4  0 0  0 30  0 30 N
+C 0 50 20 0 1 4 N
+X VDD33 1 0 0 0 U 20 20 0 0 W N
+ENDDRAW
+ENDDEF
+#
+# VDD5
+#
+DEF VDD5 #PWR 0 0 Y Y 1 F P
+F0 "#PWR" 0 100 30 H I C CNN
+F1 "VDD5" 0 100 30 H V C CNN
+DRAW
+P 3 0 1 4  0 0  0 30  0 30 N
+C 0 50 20 0 1 4 N
+X VDD5 1 0 0 0 U 20 20 0 0 W N
+ENDDRAW
+ENDDEF
+#
+# VIA
+#
+DEF ~VIA V 0 40 N Y 1 F N
+F0 "V" 25 100 20 V V C CNN
+F1 "VIA" 0 200 60 H I C CNN
+DRAW
+X Via 1 0 0 25 U 20 20 1 1 P
+ENDDRAW
+ENDDEF
+#
+# VIN
+#
+DEF VIN #PWR 0 0 Y Y 1 F P
+F0 "#PWR" 0 100 30 H I C CNN
+F1 "VIN" 0 100 30 H V C CNN
+DRAW
+P 3 0 1 4  0 0  0 30  0 30 N
+C 0 50 20 0 1 4 N
+X VIN 1 0 0 0 U 20 20 0 0 W N
+ENDDRAW
+ENDDEF
+#
+#EndLibrary

Micropendous/Design/Micropendous5_Arduino_Pinout/Micropendous5.pro

@@ -0,0 +1,6 @@
+update=10/23/2009 1:50:22 AM
+last_client=kicad
+[general]
+version=1
+RootSch=
+BoardNm=