Updated LUFA to r2637 and FreeRTOS to 7.4.0

Micropendous/Firmware/MicropendousKeyboardTest/Config/LUFAConfig.h

@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif

Micropendous/Firmware/MicropendousKeyboardTest/Descriptors.c

@@ -0,0 +1,231 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
+{
+	/* Use the HID class driver's standard Keyboard report.
+	 *   Max simultaneous keys: 6
+	 */
+	HID_DESCRIPTOR_KEYBOARD(6)
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(01.10),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2042,
+	.ReleaseNumber          = VERSION_BCD(00.01),
+
+	.ManufacturerStrIndex   = 0x01,
+	.ProductStrIndex        = 0x02,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = 0x00,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_KeyboardBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_KeyboardHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(01.11),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(KeyboardReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = KEYBOARD_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = KEYBOARD_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
+
+	.UnicodeString          = {LANGUAGE_ID_ENG}
+};
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
+
+	.UnicodeString          = L"Dean Camera"
+};
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},
+
+	.UnicodeString          = L"LUFA Keyboard Demo"
+};
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint8_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case 0x00:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case 0x01:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case 0x02:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_KeyboardHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &KeyboardReport;
+			Size    = sizeof(KeyboardReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+

Micropendous/Firmware/MicropendousKeyboardTest/Descriptors.h

@@ -0,0 +1,73 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Keyboard HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_KeyboardHID;
+	        USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+	/* Macros: */
+		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
+		#define KEYBOARD_EPADDR              (ENDPOINT_DIR_IN | 1)
+
+		/** Size in bytes of the Keyboard HID reporting IN endpoint. */
+		#define KEYBOARD_EPSIZE              8
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint8_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+

Micropendous/Firmware/MicropendousKeyboardTest/MicropendousKeyboardTest.c

@@ -0,0 +1,207 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Keyboard demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "Keyboard.h"
+
+/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
+ 	{
+		.Config =
+			{
+				.InterfaceNumber              = 0,
+				.ReportINEndpoint             =
+					{
+						.Address              = KEYBOARD_EPADDR,
+						.Size                 = KEYBOARD_EPSIZE,
+						.Banks                = 1,
+					},
+				.PrevReportINBuffer           = PrevKeyboardHIDReportBuffer,
+				.PrevReportINBufferSize       = sizeof(PrevKeyboardHIDReportBuffer),
+			},
+    };
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Device_USBTask(&Keyboard_HID_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware()
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	Buttons_Init();
+	USB_Init();
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Keyboard_HID_Interface);
+
+	USB_Device_EnableSOFEvents();
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	HID_Device_ProcessControlRequest(&Keyboard_HID_Interface);
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	HID_Device_MillisecondElapsed(&Keyboard_HID_Interface);
+}
+
+/** HID class driver callback function for the creation of HID reports to the host.
+ *
+ *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
+ *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
+ *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
+ *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
+ *
+ *  \return Boolean true to force the sending of the report, false to let the library determine if it needs to be sent
+ */
+bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                         uint8_t* const ReportID,
+                                         const uint8_t ReportType,
+                                         void* ReportData,
+                                         uint16_t* const ReportSize)
+{
+	USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
+
+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
+
+	uint8_t UsedKeyCodes = 0;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_A;
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_B;
+
+	if (JoyStatus_LCL & JOY_LEFT)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_C;
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_D;
+
+	if (JoyStatus_LCL & JOY_PRESS)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_E;
+
+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_F;
+
+	if (UsedKeyCodes)
+	  KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
+
+	*ReportSize = sizeof(USB_KeyboardReport_Data_t);
+	return false;
+}
+
+/** HID class driver callback function for the processing of HID reports from the host.
+ *
+ *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in] ReportID    Report ID of the received report from the host
+ *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
+ *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
+ *  \param[in] ReportSize  Size in bytes of the received HID report
+ */
+void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                          const uint8_t ReportID,
+                                          const uint8_t ReportType,
+                                          const void* ReportData,
+                                          const uint16_t ReportSize)
+{
+	uint8_t  LEDMask   = LEDS_NO_LEDS;
+	uint8_t* LEDReport = (uint8_t*)ReportData;
+
+	if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
+	  LEDMask |= LEDS_LED1;
+
+	if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
+	  LEDMask |= LEDS_LED3;
+
+	if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
+	  LEDMask |= LEDS_LED4;
+
+	LEDs_SetAllLEDs(LEDMask);
+}
+

Micropendous/Firmware/MicropendousKeyboardTest/MicropendousKeyboardTest.h

@@ -0,0 +1,88 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Keyboard.c.
+ */
+
+#ifndef _KEYBOARD_H_
+#define _KEYBOARD_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                         uint8_t* const ReportID,
+		                                         const uint8_t ReportType,
+		                                         void* ReportData,
+		                                         uint16_t* const ReportSize);
+		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                          const uint8_t ReportID,
+		                                          const uint8_t ReportType,
+		                                          const void* ReportData,
+		                                          const uint16_t ReportSize);
+
+#endif
+

Micropendous/Firmware/MicropendousKeyboardTest/MicropendousKeyboardTest.txt

@@ -0,0 +1,73 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Keyboard Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Keyboard Subclass</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Keyboard demonstration application. This gives a simple reference application
+ *  for implementing a USB Keyboard using the basic USB HID drivers in all modern
+ *  OSes (i.e. no special drivers required). It is boot protocol compatible, and thus
+ *  works under compatible BIOS as if it was a native keyboard (e.g. PS/2).
+ *
+ *  On start-up the system will automatically enumerate and function as a keyboard
+ *  when the USB connection to a host is present. To use the keyboard example,
+ *  manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
+ *  documentation for more information on sending keyboard event and key presses. Unlike
+ *  other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses
+ *  inside the same report to the host.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+

Micropendous/Firmware/MicropendousKeyboardTest/asf.xml

@@ -0,0 +1,47 @@
+<asf xmlversion="1.0">
+	<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example">
+		<require idref="lufa.demos.device.class.keyboard"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
+
+		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.demos.device.class.keyboard" caption="Keyboard HID Device Demo (Class Driver APIs)">
+		<info type="description" value="summary">
+		Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host.
+		</info>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Class Driver APIs"/>
+			<keyword value="USB Device"/>
+			<keyword value="HID Class"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="distribute" subtype="user-file" value="Keyboard.txt"/>
+
+		<build type="c-source" value="Keyboard.c"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Keyboard.h"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.buttons"/>
+	</module>
+</asf>

Micropendous/Firmware/MicropendousKeyboardTest/makefile

@@ -0,0 +1,38 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2013.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = Keyboard
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk

Micropendous/Firmware/VirtualSerial/Config/LUFAConfig.h

@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif

Micropendous/Firmware/VirtualSerial/Descriptors.c

@@ -0,0 +1,260 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(01.10),
+	.Class                  = CDC_CSCP_CDCClass,
+	.SubClass               = CDC_CSCP_NoSpecificSubclass,
+	.Protocol               = CDC_CSCP_NoSpecificProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2044,
+	.ReleaseNumber          = VERSION_BCD(00.01),
+
+	.ManufacturerStrIndex   = 0x01,
+	.ProductStrIndex        = 0x02,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 2,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = 0,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(01.10),
+		},
+
+	.CDC_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = 0,
+			.SlaveInterfaceNumber   = 1,
+		},
+
+	.CDC_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = 1,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
+
+	.UnicodeString          = {LANGUAGE_ID_ENG}
+};
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
+
+	.UnicodeString          = L"Dean Camera"
+};
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
+
+	.UnicodeString          = L"LUFA CDC Demo"
+};
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint8_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case 0x00:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case 0x01:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case 0x02:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+

Micropendous/Firmware/VirtualSerial/Descriptors.h

@@ -0,0 +1,89 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the CDC device-to-host data IN endpoint. */
+		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
+		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                16
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t    Config;
+
+			// CDC Control Interface
+			USB_Descriptor_Interface_t               CDC_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
+
+			// CDC Data Interface
+			USB_Descriptor_Interface_t               CDC_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint8_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+

Micropendous/Firmware/VirtualSerial/LUFA_VirtualSerial.inf

@@ -0,0 +1,63 @@
+;************************************************************
+; Windows USB CDC ACM Setup File
+; Copyright (c) 2000 Microsoft Corporation
+;************************************************************
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[SourceDisksNames]
+
+[SourceDisksFiles]
+
+[DestinationDirs]
+DefaultDestDir=12
+
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
+
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
+
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"

Micropendous/Firmware/VirtualSerial/VirtualSerial.c

@@ -0,0 +1,175 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the VirtualSerial demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "VirtualSerial.h"
+
+/** LUFA CDC Class driver interface configuration and state information. This structure is
+ *  passed to all CDC Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber   = 0,
+				.DataINEndpoint           =
+					{
+						.Address          = CDC_TX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.DataOUTEndpoint =
+					{
+						.Address          = CDC_RX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.NotificationEndpoint =
+					{
+						.Address          = CDC_NOTIFICATION_EPADDR,
+						.Size             = CDC_NOTIFICATION_EPSIZE,
+						.Banks            = 1,
+					},
+			},
+	};
+
+/** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be
+ *  used like any regular character stream in the C APIs
+ */
+static FILE USBSerialStream;
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	/* Create a regular character stream for the interface so that it can be used with the stdio.h functions */
+	CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CheckJoystickMovement();
+
+		/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
+		CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+
+		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
+void CheckJoystickMovement(void)
+{
+	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
+	char*       ReportString  = NULL;
+	static bool ActionSent    = false;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportString = "Joystick Up\r\n";
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportString = "Joystick Down\r\n";
+	else if (JoyStatus_LCL & JOY_LEFT)
+	  ReportString = "Joystick Left\r\n";
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportString = "Joystick Right\r\n";
+	else if (JoyStatus_LCL & JOY_PRESS)
+	  ReportString = "Joystick Pressed\r\n";
+	else
+	  ActionSent = false;
+
+	if ((ReportString != NULL) && (ActionSent == false))
+	{
+		ActionSent = true;
+
+		/* Write the string to the virtual COM port via the created character stream */
+		fputs(ReportString, &USBSerialStream);
+
+		/* Alternatively, without the stream: */
+		// CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString);
+	}
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
+}
+

Micropendous/Firmware/VirtualSerial/VirtualSerial.h

@@ -0,0 +1,76 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for VirtualSerial.c.
+ */
+
+#ifndef _VIRTUALSERIAL_H_
+#define _VIRTUALSERIAL_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+		#include <stdio.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void CheckJoystickMovement(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+

Micropendous/Firmware/VirtualSerial/VirtualSerial.txt

@@ -0,0 +1,73 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Communications Device Class (Virtual Serial Port) Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Communications Device Class demonstration application.
+ *  This gives a simple reference application for implementing
+ *  a CDC device acting as a virtual serial port. Joystick
+ *  actions are transmitted to the host as strings. The device
+ *  does not respond to serial data sent from the host.
+ *
+ *  After running this demo for the first time on a new computer,
+ *  you will need to supply the .INF file located in this demo
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+

Micropendous/Firmware/VirtualSerial/asf.xml

@@ -0,0 +1,48 @@
+<asf xmlversion="1.0">
+	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example">
+		<require idref="lufa.demos.device.class.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
+
+		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.demos.device.class.cdc" caption="Virtual Serial CDC Device Demo (Class Driver APIs)">
+		<info type="description" value="summary">
+		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device.
+		</info>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Class Driver APIs"/>
+			<keyword value="USB Device"/>
+			<keyword value="CDC Class"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>
+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>
+
+		<build type="c-source" value="VirtualSerial.c"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="VirtualSerial.h"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.joystick"/>
+	</module>
+</asf>

Micropendous/Firmware/VirtualSerial/makefile

@@ -0,0 +1,38 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2013.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = VirtualSerial
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk

Micropendous/Firmware/VirtualSerial_FreeRTOS/Config/LUFAConfig.h

@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif

Micropendous/Firmware/VirtualSerial_FreeRTOS/Descriptors.c

@@ -0,0 +1,260 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(01.10),
+	.Class                  = CDC_CSCP_CDCClass,
+	.SubClass               = CDC_CSCP_NoSpecificSubclass,
+	.Protocol               = CDC_CSCP_NoSpecificProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2044,
+	.ReleaseNumber          = VERSION_BCD(00.01),
+
+	.ManufacturerStrIndex   = 0x01,
+	.ProductStrIndex        = 0x02,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 2,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = 0,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(01.10),
+		},
+
+	.CDC_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = 0,
+			.SlaveInterfaceNumber   = 1,
+		},
+
+	.CDC_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = 1,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
+
+	.UnicodeString          = {LANGUAGE_ID_ENG}
+};
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
+
+	.UnicodeString          = L"Dean Camera"
+};
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
+
+	.UnicodeString          = L"LUFA CDC Demo"
+};
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint8_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case 0x00:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case 0x01:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case 0x02:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+

Micropendous/Firmware/VirtualSerial_FreeRTOS/Descriptors.h

@@ -0,0 +1,89 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the CDC device-to-host data IN endpoint. */
+		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
+		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                16
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t    Config;
+
+			// CDC Control Interface
+			USB_Descriptor_Interface_t               CDC_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
+
+			// CDC Data Interface
+			USB_Descriptor_Interface_t               CDC_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint8_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+

Micropendous/Firmware/VirtualSerial_FreeRTOS/LUFA_VirtualSerial.inf

@@ -0,0 +1,63 @@
+;************************************************************
+; Windows USB CDC ACM Setup File
+; Copyright (c) 2000 Microsoft Corporation
+;************************************************************
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[SourceDisksNames]
+
+[SourceDisksFiles]
+
+[DestinationDirs]
+DefaultDestDir=12
+
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
+
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
+
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"

Micropendous/Firmware/VirtualSerial_FreeRTOS/VirtualSerial.c

@@ -0,0 +1,175 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the VirtualSerial demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "VirtualSerial.h"
+
+/** LUFA CDC Class driver interface configuration and state information. This structure is
+ *  passed to all CDC Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber   = 0,
+				.DataINEndpoint           =
+					{
+						.Address          = CDC_TX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.DataOUTEndpoint =
+					{
+						.Address          = CDC_RX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.NotificationEndpoint =
+					{
+						.Address          = CDC_NOTIFICATION_EPADDR,
+						.Size             = CDC_NOTIFICATION_EPSIZE,
+						.Banks            = 1,
+					},
+			},
+	};
+
+/** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be
+ *  used like any regular character stream in the C APIs
+ */
+static FILE USBSerialStream;
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	/* Create a regular character stream for the interface so that it can be used with the stdio.h functions */
+	CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CheckJoystickMovement();
+
+		/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
+		CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+
+		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
+void CheckJoystickMovement(void)
+{
+	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
+	char*       ReportString  = NULL;
+	static bool ActionSent    = false;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportString = "Joystick Up\r\n";
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportString = "Joystick Down\r\n";
+	else if (JoyStatus_LCL & JOY_LEFT)
+	  ReportString = "Joystick Left\r\n";
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportString = "Joystick Right\r\n";
+	else if (JoyStatus_LCL & JOY_PRESS)
+	  ReportString = "Joystick Pressed\r\n";
+	else
+	  ActionSent = false;
+
+	if ((ReportString != NULL) && (ActionSent == false))
+	{
+		ActionSent = true;
+
+		/* Write the string to the virtual COM port via the created character stream */
+		fputs(ReportString, &USBSerialStream);
+
+		/* Alternatively, without the stream: */
+		// CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString);
+	}
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
+}
+

Micropendous/Firmware/VirtualSerial_FreeRTOS/VirtualSerial.h

@@ -0,0 +1,76 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for VirtualSerial.c.
+ */
+
+#ifndef _VIRTUALSERIAL_H_
+#define _VIRTUALSERIAL_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+		#include <stdio.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void CheckJoystickMovement(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+

Micropendous/Firmware/VirtualSerial_FreeRTOS/VirtualSerial.txt

@@ -0,0 +1,73 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Communications Device Class (Virtual Serial Port) Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Communications Device Class demonstration application.
+ *  This gives a simple reference application for implementing
+ *  a CDC device acting as a virtual serial port. Joystick
+ *  actions are transmitted to the host as strings. The device
+ *  does not respond to serial data sent from the host.
+ *
+ *  After running this demo for the first time on a new computer,
+ *  you will need to supply the .INF file located in this demo
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+

Micropendous/Firmware/VirtualSerial_FreeRTOS/asf.xml

@@ -0,0 +1,48 @@
+<asf xmlversion="1.0">
+	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example">
+		<require idref="lufa.demos.device.class.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
+
+		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.demos.device.class.cdc" caption="Virtual Serial CDC Device Demo (Class Driver APIs)">
+		<info type="description" value="summary">
+		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device.
+		</info>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Class Driver APIs"/>
+			<keyword value="USB Device"/>
+			<keyword value="CDC Class"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>
+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>
+
+		<build type="c-source" value="VirtualSerial.c"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="VirtualSerial.h"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.joystick"/>
+	</module>
+</asf>

Micropendous/Firmware/VirtualSerial_FreeRTOS/makefile

@@ -0,0 +1,38 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2013.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = VirtualSerial
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk

Micropendous/libs/FreeRTOS/Demo/AVR_ATMega323_WinAVR/FreeRTOSConfig.h

@@ -0,0 +1,122 @@
+/*
+    FreeRTOS V7.4.0 - Copyright (C) 2013 Real Time Engineers Ltd.
+
+    FEATURES AND PORTS ARE ADDED TO FREERTOS ALL THE TIME.  PLEASE VISIT
+    http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+     *    Complete, revised, and edited pdf reference manuals are also       *
+     *    available.                                                         *
+     *                                                                       *
+     *    Purchasing FreeRTOS documentation will not only help you, by       *
+     *    ensuring you get running as quickly as possible and with an        *
+     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+     *    the FreeRTOS project to continue with its mission of providing     *
+     *    professional grade, cross platform, de facto standard solutions    *
+     *    for microcontrollers - completely free of charge!                  *
+     *                                                                       *
+     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+     *                                                                       *
+     *    Thank you for using FreeRTOS, and thank you for your support!      *
+     *                                                                       *
+    ***************************************************************************
+
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+
+    >>>>>>NOTE<<<<<< The modification to the GPL is included to allow you to
+    distribute a combined work that includes FreeRTOS without being obliged to
+    provide the source code for proprietary components outside of the FreeRTOS
+    kernel.
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+    details. You should have received a copy of the GNU General Public License
+    and the FreeRTOS license exception along with FreeRTOS; if not itcan be
+    viewed here: http://www.freertos.org/a00114.html and also obtained by
+    writing to Real Time Engineers Ltd., contact details for whom are available
+    on the FreeRTOS WEB site.
+
+    1 tab == 4 spaces!
+
+    ***************************************************************************
+     *                                                                       *
+     *    Having a problem?  Start by reading the FAQ "My application does   *
+     *    not run, what could be wrong?"                                     *
+     *                                                                       *
+     *    http://www.FreeRTOS.org/FAQHelp.html                               *
+     *                                                                       *
+    ***************************************************************************
+
+
+    http://www.FreeRTOS.org - Documentation, books, training, latest versions, 
+    license and Real Time Engineers Ltd. contact details.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, and our new
+    fully thread aware and reentrant UDP/IP stack.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High 
+    Integrity Systems, who sell the code with commercial support, 
+    indemnification and middleware, under the OpenRTOS brand.
+    
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety 
+    engineered and independently SIL3 certified version for use in safety and 
+    mission critical applications that require provable dependability.
+*/
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+#include <avr/io.h>
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. 
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+#define configUSE_PREEMPTION		1
+#define configUSE_IDLE_HOOK			1
+#define configUSE_TICK_HOOK			0
+#define configCPU_CLOCK_HZ			( ( unsigned long ) 8000000 )
+#define configTICK_RATE_HZ			( ( portTickType ) 1000 )
+#define configMAX_PRIORITIES		( ( unsigned portBASE_TYPE ) 4 )
+#define configMINIMAL_STACK_SIZE	( ( unsigned short ) 85 )
+#define configTOTAL_HEAP_SIZE		( (size_t ) ( 1500 ) )
+#define configMAX_TASK_NAME_LEN		( 8 )
+#define configUSE_TRACE_FACILITY	0
+#define configUSE_16_BIT_TICKS		1
+#define configIDLE_SHOULD_YIELD		1
+#define configQUEUE_REGISTRY_SIZE	0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 		1
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+
+#define INCLUDE_vTaskPrioritySet		0
+#define INCLUDE_uxTaskPriorityGet		0
+#define INCLUDE_vTaskDelete				1
+#define INCLUDE_vTaskCleanUpResources	0
+#define INCLUDE_vTaskSuspend			0
+#define INCLUDE_vTaskDelayUntil			1
+#define INCLUDE_vTaskDelay				1
+
+
+#endif /* FREERTOS_CONFIG_H */

Micropendous/libs/FreeRTOS/Demo/AVR_ATMega323_WinAVR/ParTest/ParTest.c

@@ -0,0 +1,165 @@
+/*
+    FreeRTOS V7.4.0 - Copyright (C) 2013 Real Time Engineers Ltd.
+
+    FEATURES AND PORTS ARE ADDED TO FREERTOS ALL THE TIME.  PLEASE VISIT
+    http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+     *    Complete, revised, and edited pdf reference manuals are also       *
+     *    available.                                                         *
+     *                                                                       *
+     *    Purchasing FreeRTOS documentation will not only help you, by       *
+     *    ensuring you get running as quickly as possible and with an        *
+     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+     *    the FreeRTOS project to continue with its mission of providing     *
+     *    professional grade, cross platform, de facto standard solutions    *
+     *    for microcontrollers - completely free of charge!                  *
+     *                                                                       *
+     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+     *                                                                       *
+     *    Thank you for using FreeRTOS, and thank you for your support!      *
+     *                                                                       *
+    ***************************************************************************
+
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+
+    >>>>>>NOTE<<<<<< The modification to the GPL is included to allow you to
+    distribute a combined work that includes FreeRTOS without being obliged to
+    provide the source code for proprietary components outside of the FreeRTOS
+    kernel.
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+    details. You should have received a copy of the GNU General Public License
+    and the FreeRTOS license exception along with FreeRTOS; if not itcan be
+    viewed here: http://www.freertos.org/a00114.html and also obtained by
+    writing to Real Time Engineers Ltd., contact details for whom are available
+    on the FreeRTOS WEB site.
+
+    1 tab == 4 spaces!
+
+    ***************************************************************************
+     *                                                                       *
+     *    Having a problem?  Start by reading the FAQ "My application does   *
+     *    not run, what could be wrong?"                                     *
+     *                                                                       *
+     *    http://www.FreeRTOS.org/FAQHelp.html                               *
+     *                                                                       *
+    ***************************************************************************
+
+
+    http://www.FreeRTOS.org - Documentation, books, training, latest versions, 
+    license and Real Time Engineers Ltd. contact details.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, and our new
+    fully thread aware and reentrant UDP/IP stack.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High 
+    Integrity Systems, who sell the code with commercial support, 
+    indemnification and middleware, under the OpenRTOS brand.
+    
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety 
+    engineered and independently SIL3 certified version for use in safety and 
+    mission critical applications that require provable dependability.
+*/
+
+/* 
+Changes from V2.0.0
+
+	+ Use scheduler suspends in place of critical sections.
+
+Changes from V2.6.0
+
+	+ Replaced the inb() and outb() functions with direct memory
+	  access.  This allows the port to be built with the 20050414 build of
+	  WinAVR.
+*/
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "partest.h"
+
+/*-----------------------------------------------------------
+ * Simple parallel port IO routines.
+ *-----------------------------------------------------------*/
+
+#define partstALL_BITS_OUTPUT			( ( unsigned char ) 0xff )
+#define partstALL_OUTPUTS_OFF			( ( unsigned char ) 0xff )
+#define partstMAX_OUTPUT_LED			( ( unsigned char ) 7 )
+
+static volatile unsigned char ucCurrentOutputValue = partstALL_OUTPUTS_OFF; /*lint !e956 File scope parameters okay here. */
+
+/*-----------------------------------------------------------*/
+
+void vParTestInitialise( void )
+{
+	ucCurrentOutputValue = partstALL_OUTPUTS_OFF;
+
+	/* Set port B direction to outputs.  Start with all output off. */
+	DDRB = partstALL_BITS_OUTPUT;
+	PORTB = ucCurrentOutputValue;
+}
+/*-----------------------------------------------------------*/
+
+void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
+{
+unsigned char ucBit = ( unsigned char ) 1;
+
+	if( uxLED <= partstMAX_OUTPUT_LED )
+	{
+		ucBit <<= uxLED;	
+
+		vTaskSuspendAll();
+		{
+			if( xValue == pdTRUE )
+			{
+				ucBit ^= ( unsigned char ) 0xff;
+				ucCurrentOutputValue &= ucBit;
+			}
+			else
+			{
+				ucCurrentOutputValue |= ucBit;
+			}
+
+			PORTB = ucCurrentOutputValue;
+		}
+		xTaskResumeAll();
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
+{
+unsigned char ucBit;
+
+	if( uxLED <= partstMAX_OUTPUT_LED )
+	{
+		ucBit = ( ( unsigned char ) 1 ) << uxLED;
+
+		vTaskSuspendAll();
+		{
+			if( ucCurrentOutputValue & ucBit )
+			{
+				ucCurrentOutputValue &= ~ucBit;
+			}
+			else
+			{
+				ucCurrentOutputValue |= ucBit;
+			}
+
+			PORTB = ucCurrentOutputValue;
+		}
+		xTaskResumeAll();			
+	}
+}
+
+

Micropendous/libs/FreeRTOS/Demo/AVR_ATMega323_WinAVR/main.c

@@ -0,0 +1,300 @@
+/*
+    FreeRTOS V7.4.0 - Copyright (C) 2013 Real Time Engineers Ltd.
+
+    FEATURES AND PORTS ARE ADDED TO FREERTOS ALL THE TIME.  PLEASE VISIT
+    http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+     *    Complete, revised, and edited pdf reference manuals are also       *
+     *    available.                                                         *
+     *                                                                       *
+     *    Purchasing FreeRTOS documentation will not only help you, by       *
+     *    ensuring you get running as quickly as possible and with an        *
+     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+     *    the FreeRTOS project to continue with its mission of providing     *
+     *    professional grade, cross platform, de facto standard solutions    *
+     *    for microcontrollers - completely free of charge!                  *
+     *                                                                       *
+     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+     *                                                                       *
+     *    Thank you for using FreeRTOS, and thank you for your support!      *
+     *                                                                       *
+    ***************************************************************************
+
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+
+    >>>>>>NOTE<<<<<< The modification to the GPL is included to allow you to
+    distribute a combined work that includes FreeRTOS without being obliged to
+    provide the source code for proprietary components outside of the FreeRTOS
+    kernel.
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+    details. You should have received a copy of the GNU General Public License
+    and the FreeRTOS license exception along with FreeRTOS; if not itcan be
+    viewed here: http://www.freertos.org/a00114.html and also obtained by
+    writing to Real Time Engineers Ltd., contact details for whom are available
+    on the FreeRTOS WEB site.
+
+    1 tab == 4 spaces!
+
+    ***************************************************************************
+     *                                                                       *
+     *    Having a problem?  Start by reading the FAQ "My application does   *
+     *    not run, what could be wrong?"                                     *
+     *                                                                       *
+     *    http://www.FreeRTOS.org/FAQHelp.html                               *
+     *                                                                       *
+    ***************************************************************************
+
+
+    http://www.FreeRTOS.org - Documentation, books, training, latest versions, 
+    license and Real Time Engineers Ltd. contact details.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, and our new
+    fully thread aware and reentrant UDP/IP stack.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High 
+    Integrity Systems, who sell the code with commercial support, 
+    indemnification and middleware, under the OpenRTOS brand.
+    
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety 
+    engineered and independently SIL3 certified version for use in safety and 
+    mission critical applications that require provable dependability.
+*/
+
+/*
+ * Creates all the demo application tasks, then starts the scheduler.  The WEB
+ * documentation provides more details of the demo application tasks.
+ * 
+ * Main. c also creates a task called "Check".  This only executes every three 
+ * seconds but has the highest priority so is guaranteed to get processor time.  
+ * Its main function is to check that all the other tasks are still operational.  
+ * Each task that does not flash an LED maintains a unique count that is 
+ * incremented each time the task successfully completes its function.  Should 
+ * any error occur within such a task the count is permanently halted.  The 
+ * check task inspects the count of each task to ensure it has changed since
+ * the last time the check task executed.  If all the count variables have 
+ * changed all the tasks are still executing error free, and the check task
+ * toggles an LED.  Should any task contain an error at any time the LED toggle
+ * will stop.
+ *
+ * The LED flash and communications test tasks do not maintain a count.
+ */
+
+/*
+Changes from V1.2.0
+	
+	+ Changed the baud rate for the serial test from 19200 to 57600.
+
+Changes from V1.2.3
+
+	+ The integer and comtest tasks are now used when the cooperative scheduler 
+	  is being used.  Previously they were only used with the preemptive
+	  scheduler.
+
+Changes from V1.2.5
+
+	+ Set the baud rate to 38400.  This has a smaller error percentage with an
+	  8MHz clock (according to the manual).
+
+Changes from V2.0.0
+
+	+ Delay periods are now specified using variables and constants of
+	  portTickType rather than unsigned long.
+
+Changes from V2.6.1
+
+	+ The IAR and WinAVR AVR ports are now maintained separately.
+
+Changes from V4.0.5
+
+	+ Modified to demonstrate the use of co-routines.
+
+*/
+
+#include <stdlib.h>
+#include <string.h>
+
+#ifdef GCC_MEGA_AVR
+	/* EEPROM routines used only with the WinAVR compiler. */
+	#include <avr/eeprom.h> 
+#endif
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "croutine.h"
+
+/* Demo file headers. */
+#include "PollQ.h"
+#include "integer.h"
+#include "serial.h"
+#include "comtest.h"
+#include "crflash.h"
+#include "print.h"
+#include "partest.h"
+#include "regtest.h"
+
+/* Priority definitions for most of the tasks in the demo application.  Some
+tasks just use the idle priority. */
+#define mainLED_TASK_PRIORITY			( tskIDLE_PRIORITY + 1 )
+#define mainCOM_TEST_PRIORITY			( tskIDLE_PRIORITY + 2 )
+#define mainQUEUE_POLL_PRIORITY			( tskIDLE_PRIORITY + 2 )
+#define mainCHECK_TASK_PRIORITY			( tskIDLE_PRIORITY + 3 )
+
+/* Baud rate used by the serial port tasks. */
+#define mainCOM_TEST_BAUD_RATE			( ( unsigned long ) 38400 )
+
+/* LED used by the serial port tasks.  This is toggled on each character Tx,
+and mainCOM_TEST_LED + 1 is toggles on each character Rx. */
+#define mainCOM_TEST_LED				( 4 )
+
+/* LED that is toggled by the check task.  The check task periodically checks
+that all the other tasks are operating without error.  If no errors are found
+the LED is toggled.  If an error is found at any time the LED is never toggles
+again. */
+#define mainCHECK_TASK_LED				( 7 )
+
+/* The period between executions of the check task. */
+#define mainCHECK_PERIOD				( ( portTickType ) 3000 / portTICK_RATE_MS  )
+
+/* An address in the EEPROM used to count resets.  This is used to check that
+the demo application is not unexpectedly resetting. */
+#define mainRESET_COUNT_ADDRESS			( ( void * ) 0x50 )
+
+/* The number of coroutines to create. */
+#define mainNUM_FLASH_COROUTINES		( 3 )
+
+/*
+ * The task function for the "Check" task.
+ */
+static void vErrorChecks( void *pvParameters );
+
+/*
+ * Checks the unique counts of other tasks to ensure they are still operational.
+ * Flashes an LED if everything is okay. 
+ */
+static void prvCheckOtherTasksAreStillRunning( void );
+
+/*
+ * Called on boot to increment a count stored in the EEPROM.  This is used to 
+ * ensure the CPU does not reset unexpectedly.
+ */
+static void prvIncrementResetCount( void );
+
+/*
+ * The idle hook is used to scheduler co-routines.
+ */
+void vApplicationIdleHook( void );
+
+/*-----------------------------------------------------------*/
+
+short main( void )
+{
+	prvIncrementResetCount();
+
+	/* Setup the LED's for output. */
+	vParTestInitialise();
+
+	/* Create the standard demo tasks. */
+	vStartIntegerMathTasks( tskIDLE_PRIORITY );
+	vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
+	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
+	vStartRegTestTasks();
+	
+	/* Create the tasks defined within this file. */
+	xTaskCreate( vErrorChecks, ( signed char * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
+
+	/* Create the co-routines that flash the LED's. */
+	vStartFlashCoRoutines( mainNUM_FLASH_COROUTINES );
+	
+	/* In this port, to use preemptive scheduler define configUSE_PREEMPTION 
+	as 1 in portmacro.h.  To use the cooperative scheduler define 
+	configUSE_PREEMPTION as 0. */
+	vTaskStartScheduler();
+
+	return 0;
+}
+/*-----------------------------------------------------------*/
+
+static void vErrorChecks( void *pvParameters )
+{
+static volatile unsigned long ulDummyVariable = 3UL;
+
+	/* The parameters are not used. */
+	( void ) pvParameters;
+
+	/* Cycle for ever, delaying then checking all the other tasks are still
+	operating without error. */
+	for( ;; )
+	{
+		vTaskDelay( mainCHECK_PERIOD );
+
+		/* Perform a bit of 32bit maths to ensure the registers used by the 
+		integer tasks get some exercise. The result here is not important - 
+		see the demo application documentation for more info. */
+		ulDummyVariable *= 3;
+		
+		prvCheckOtherTasksAreStillRunning();
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvCheckOtherTasksAreStillRunning( void )
+{
+static portBASE_TYPE xErrorHasOccurred = pdFALSE;
+
+	if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
+	{
+		xErrorHasOccurred = pdTRUE;
+	}
+
+	if( xAreComTestTasksStillRunning() != pdTRUE )
+	{
+		xErrorHasOccurred = pdTRUE;
+	}
+
+	if( xArePollingQueuesStillRunning() != pdTRUE )
+	{
+		xErrorHasOccurred = pdTRUE;
+	}
+
+	if( xAreRegTestTasksStillRunning() != pdTRUE )
+	{
+		xErrorHasOccurred = pdTRUE;
+	}
+	
+	if( xErrorHasOccurred == pdFALSE )
+	{
+		/* Toggle the LED if everything is okay so we know if an error occurs even if not
+		using console IO. */
+		vParTestToggleLED( mainCHECK_TASK_LED );
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvIncrementResetCount( void )
+{
+unsigned char ucCount;
+
+	eeprom_read_block( &ucCount, mainRESET_COUNT_ADDRESS, sizeof( ucCount ) );
+	ucCount++;
+	eeprom_write_byte( mainRESET_COUNT_ADDRESS, ucCount );
+}
+/*-----------------------------------------------------------*/
+
+void vApplicationIdleHook( void )
+{
+	vCoRoutineSchedule();
+}
+

Micropendous/libs/FreeRTOS/Demo/AVR_ATMega323_WinAVR/makefile

@@ -0,0 +1,428 @@
+# WinAVR Sample makefile written by Eric B. Weddington, J<>rg Wunsch, et al.
+# Released to the Public Domain
+# Please read the make user manual!
+#
+# Additional material for this makefile was submitted by:
+#  Tim Henigan
+#  Peter Fleury
+#  Reiner Patommel
+#  Sander Pool
+#  Frederik Rouleau
+#  Markus Pfaff
+#
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
+#
+# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
+#                4.07 or greater).
+#
+# make program = Download the hex file to the device, using avrdude.  Please
+#                customize the avrdude settings below first!
+#
+# make filename.s = Just compile filename.c into the assembler code only
+#
+# To rebuild project do "make clean" then "make all".
+#
+
+
+# MCU name
+MCU = atmega323
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+# Target file name (without extension).
+TARGET = rtosdemo
+
+# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.
+# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# List C source files here. (C dependencies are automatically generated.)
+DEMO_DIR = ../Common/Minimal
+SOURCE_DIR = ../../Source
+PORT_DIR = ../../Source/portable/GCC/ATMega323
+
+SRC	= \
+main.c \
+ParTest/ParTest.c \
+serial/serial.c \
+regtest.c \
+$(SOURCE_DIR)/tasks.c \
+$(SOURCE_DIR)/queue.c \
+$(SOURCE_DIR)/list.c \
+$(SOURCE_DIR)/croutine.c \
+$(SOURCE_DIR)/portable/MemMang/heap_1.c \
+$(PORT_DIR)/port.c \
+$(DEMO_DIR)/crflash.c \
+$(DEMO_DIR)/integer.c \
+$(DEMO_DIR)/PollQ.c \
+$(DEMO_DIR)/comtest.c
+
+
+# If there is more than one source file, append them above, or modify and
+# uncomment the following:
+#SRC += foo.c bar.c
+
+# You can also wrap lines by appending a backslash to the end of the line:
+#SRC += baz.c \
+#xyzzy.c
+
+
+
+# List Assembler source files here.
+# Make them always end in a capital .S.  Files ending in a lowercase .s
+# will not be considered source files but generated files (assembler
+# output from the compiler), and will be deleted upon "make clean"!
+# Even though the DOS/Win* filesystem matches both .s and .S the same,
+# it will preserve the spelling of the filenames, and gcc itself does
+# care about how the name is spelled on its command-line.
+ASRC = 
+
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+EXTRAINCDIRS = 
+
+
+# Optional compiler flags.
+#  -g:        generate debugging information (for GDB, or for COFF conversion)
+#  -O*:       optimization level
+#  -f...:     tuning, see gcc manual and avr-libc documentation
+#  -Wall...:  warning level
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#    -ahlms:  create assembler listing
+
+DEBUG_LEVEL=-g
+WARNINGS=-Wall -Wextra -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare \
+		-Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wunused
+
+CFLAGS = -D GCC_MEGA_AVR -I. -I../../Source/include -I../Common/include  \
+$(DEBUG_LEVEL) -O$(OPT) \
+-fsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \
+$(WARNINGS) \
+-Wa,-adhlns=$(<:.c=.lst) \
+$(patsubst %,-I%,$(EXTRAINCDIRS))
+
+
+# Set a "language standard" compiler flag.
+#   Unremark just one line below to set the language standard to use.
+#   gnu99 = C99 + GNU extensions. See GCC manual for more information.
+#CFLAGS += -std=c89
+#CFLAGS += -std=gnu89
+#CFLAGS += -std=c99
+CFLAGS += -std=gnu99
+
+
+
+# Optional assembler flags.
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -ahlms:    create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
+
+
+
+# Optional linker flags.
+#  -Wl,...:   tell GCC to pass this to linker.
+#  -Map:      create map file
+#  --cref:    add cross reference to  map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+
+
+
+# Additional libraries
+
+# Minimalistic printf version
+#LDFLAGS += -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires -lm below)
+#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt
+
+# -lm = math library
+LDFLAGS += -lm
+
+
+
+
+# Programming support using avrdude. Settings and variables.
+
+# Programming hardware: alf avr910 avrisp bascom bsd 
+# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
+#
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = stk500
+
+
+AVRDUDE_PORT = com1	   # programmer connected to serial device
+#AVRDUDE_PORT = lpt1	# programmer connected to parallel port
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE += -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_FLAGS += -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# to submit bug reports.
+#AVRDUDE_FLAGS += -v -v
+
+
+
+
+# ---------------------------------------------------------------------------
+
+# Define directories, if needed.
+DIRAVR = c:/winavr
+DIRAVRBIN = $(DIRAVR)/bin
+DIRAVRUTILS = $(DIRAVR)/utils/bin
+DIRINC = .
+DIRLIB = $(DIRAVR)/avr/lib
+
+
+# Define programs and commands.
+SHELL = sh
+
+CC = avr-gcc
+
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+
+
+# Programming support using avrdude.
+AVRDUDE = avrdude
+
+
+REMOVE = rm -f
+COPY = cp
+
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) -A $(TARGET).elf
+
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before: 
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
+
+# Define all listing files.
+LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+# Default target.
+all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \
+	$(TARGET).lss $(TARGET).sym sizeafter finished end
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+finished:
+	@echo $(MSG_ERRORS_NONE)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+
+# Display size of file.
+sizebefore:
+	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
+
+sizeafter:
+	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
+
+
+
+# Display compiler version information.
+gccversion : 
+	@$(CC) --version
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in
+# AVR Studio or VMLAB.
+COFFCONVERT=$(OBJCOPY) --debugging \
+	--change-section-address .data-0x800000 \
+	--change-section-address .bss-0x800000 \
+	--change-section-address .noinit-0x800000 \
+	--change-section-address .eeprom-0x810000 
+
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+
+# Program the device.  
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	avr-nm -n $< > $@
+
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+
+
+
+
+# Target: clean project.
+clean: begin clean_list finished end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).obj
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).obj
+	$(REMOVE) $(TARGET).a90
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lnk
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(OBJ)
+	$(REMOVE) $(LST)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+
+
+# Automatically generate C source code dependencies. 
+# (Code originally taken from the GNU make user manual and modified 
+# (See README.txt Credits).)
+#
+# Note that this will work with sh (bash) and sed that is shipped with WinAVR
+# (see the SHELL variable defined above).
+# This may not work with other shells or other seds.
+#
+%.d: %.c
+	set -e; $(CC) -MM $(ALL_CFLAGS) $< \
+	| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \
+	[ -s $@ ] || rm -f $@
+
+
+# Remove the '-' if you want to see the dependency files generated.
+-include $(SRC:.c=.d)
+
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \
+	clean clean_list program
+

Micropendous/libs/FreeRTOS/Demo/AVR_ATMega323_WinAVR/regtest.c

@@ -0,0 +1,404 @@
+/*
+    FreeRTOS V7.4.0 - Copyright (C) 2013 Real Time Engineers Ltd.
+
+    FEATURES AND PORTS ARE ADDED TO FREERTOS ALL THE TIME.  PLEASE VISIT
+    http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+     *    Complete, revised, and edited pdf reference manuals are also       *
+     *    available.                                                         *
+     *                                                                       *
+     *    Purchasing FreeRTOS documentation will not only help you, by       *
+     *    ensuring you get running as quickly as possible and with an        *
+     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+     *    the FreeRTOS project to continue with its mission of providing     *
+     *    professional grade, cross platform, de facto standard solutions    *
+     *    for microcontrollers - completely free of charge!                  *
+     *                                                                       *
+     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+     *                                                                       *
+     *    Thank you for using FreeRTOS, and thank you for your support!      *
+     *                                                                       *
+    ***************************************************************************
+
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+
+    >>>>>>NOTE<<<<<< The modification to the GPL is included to allow you to
+    distribute a combined work that includes FreeRTOS without being obliged to
+    provide the source code for proprietary components outside of the FreeRTOS
+    kernel.
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+    details. You should have received a copy of the GNU General Public License
+    and the FreeRTOS license exception along with FreeRTOS; if not itcan be
+    viewed here: http://www.freertos.org/a00114.html and also obtained by
+    writing to Real Time Engineers Ltd., contact details for whom are available
+    on the FreeRTOS WEB site.
+
+    1 tab == 4 spaces!
+
+    ***************************************************************************
+     *                                                                       *
+     *    Having a problem?  Start by reading the FAQ "My application does   *
+     *    not run, what could be wrong?"                                     *
+     *                                                                       *
+     *    http://www.FreeRTOS.org/FAQHelp.html                               *
+     *                                                                       *
+    ***************************************************************************
+
+
+    http://www.FreeRTOS.org - Documentation, books, training, latest versions, 
+    license and Real Time Engineers Ltd. contact details.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, and our new
+    fully thread aware and reentrant UDP/IP stack.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High 
+    Integrity Systems, who sell the code with commercial support, 
+    indemnification and middleware, under the OpenRTOS brand.
+    
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety 
+    engineered and independently SIL3 certified version for use in safety and 
+    mission critical applications that require provable dependability.
+*/
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* Demo file headers. */
+#include "regtest.h"
+
+/*
+ * Test tasks that sets registers to known values, then checks to ensure the
+ * values remain as expected.  Test 1 and test 2 use different values.
+ */
+static void prvRegisterCheck1( void *pvParameters );
+static void prvRegisterCheck2( void *pvParameters );
+
+/* Set to a non zero value should an error be found. */
+portBASE_TYPE xRegTestError = pdFALSE;
+
+/*-----------------------------------------------------------*/
+
+void vStartRegTestTasks( void )
+{
+	xTaskCreate( prvRegisterCheck1, ( signed char * ) "Reg1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
+	xTaskCreate( prvRegisterCheck2, ( signed char * ) "Reg2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );		
+}
+/*-----------------------------------------------------------*/
+
+portBASE_TYPE xAreRegTestTasksStillRunning( void )
+{
+portBASE_TYPE xReturn;
+
+	/* If a register was found to contain an unexpected value then the
+	xRegTestError variable would have been set to a non zero value. */
+	if( xRegTestError == pdFALSE )
+	{
+		xReturn = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+	
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+static void prvRegisterCheck1( void *pvParameters )
+{
+	( void ) pvParameters;
+
+	for( ;; )
+	{
+		asm(	"LDI	r31,	5"		);		
+		asm( 	"MOV	r0,		r31"	);
+		asm(	"LDI	r31,	6"		);
+		asm( 	"MOV	r1,		r31"	);
+		asm(	"LDI	r31,	7"		);
+		asm( 	"MOV	r2,		r31"	);
+		asm(	"LDI	r31,	8"		);
+		asm( 	"MOV	r3,		r31"	);
+		asm(	"LDI	r31,	9"		);
+		asm( 	"MOV	r4,		r31"	);
+		asm(	"LDI	r31,	10"		);
+		asm( 	"MOV	r5,		r31"	);
+		asm(	"LDI	r31,	11"		);
+		asm( 	"MOV	r6,		r31"	);
+		asm(	"LDI	r31,	12"		);
+		asm( 	"MOV	r7,		r31"	);
+		asm(	"LDI	r31,	13"		);
+		asm( 	"MOV	r8,		r31"	);
+		asm(	"LDI	r31,	14"		);
+		asm( 	"MOV	r9,		r31"	);
+		asm(	"LDI	r31,	15"		);
+		asm( 	"MOV	r10,	r31"	);
+		asm(	"LDI	r31,	16"		);
+		asm( 	"MOV	r11,	r31"	);
+		asm(	"LDI	r31,	17"		);
+		asm( 	"MOV	r12,	r31"	);
+		asm(	"LDI	r31,	18"		);
+		asm( 	"MOV	r13,	r31"	);
+		asm(	"LDI	r31,	19"		);
+		asm( 	"MOV	r14,	r31"	);
+		asm(	"LDI	r31,	20"		);
+		asm( 	"MOV	r15,	r31"	);
+		asm(	"LDI	r16,	21"		);
+		asm(	"LDI	r17,	22"		);
+		asm(	"LDI	r18,	23"		);
+		asm(	"LDI	r19,	24"		);
+		asm(	"LDI	r20,	25"		);
+		asm(	"LDI	r21,	26"		);
+		asm(	"LDI	r22,	27"		);
+		asm(	"LDI	r23,	28"		);
+		asm(	"LDI	r24,	29"		);
+		asm(	"LDI	r25,	30"		);
+		asm(	"LDI	r26,	31"		);
+		asm(	"LDI	r27,	32"		);
+		asm(	"LDI	r30,	33"		);
+
+		asm(	"LDI	r31,	5"			);
+		asm(	"CPSE	r31,	r0"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	6"			);
+		asm(	"CPSE	r31,	r1"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	7"			);
+		asm(	"CPSE	r31,	r2"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	8"			);
+		asm(	"CPSE	r31,	r3"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	9"			);
+		asm(	"CPSE	r31,	r4"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	10"			);
+		asm(	"CPSE	r31,	r5"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	11"			);
+		asm(	"CPSE	r31,	r6"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	12"			);
+		asm(	"CPSE	r31,	r7"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	13"			);
+		asm(	"CPSE	r31,	r8"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	14"			);
+		asm(	"CPSE	r31,	r9"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	15"			);
+		asm(	"CPSE	r31,	r10"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	16"			);
+		asm(	"CPSE	r31,	r11"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	17"			);
+		asm(	"CPSE	r31,	r12"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	18"			);
+		asm(	"CPSE	r31,	r13"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	19"			);
+		asm(	"CPSE	r31,	r14"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	20"			);
+		asm(	"CPSE	r31,	r15"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	21"			);
+		asm(	"CPSE	r31,	r16"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	22"			);
+		asm(	"CPSE	r31,	r17"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	23"			);
+		asm(	"CPSE	r31,	r18"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	24"			);
+		asm(	"CPSE	r31,	r19"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	25"			);
+		asm(	"CPSE	r31,	r20"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	26"			);
+		asm(	"CPSE	r31,	r21"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	27"			);
+		asm(	"CPSE	r31,	r22"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	28"			);
+		asm(	"CPSE	r31,	r23"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	29"			);
+		asm(	"CPSE	r31,	r24"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	30"			);
+		asm(	"CPSE	r31,	r25"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	31"			);
+		asm(	"CPSE	r31,	r26"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	32"			);
+		asm(	"CPSE	r31,	r27"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	33"			);
+		asm(	"CPSE	r31,	r30"		);
+		asm(	"STS	xRegTestError, r0"	);
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvRegisterCheck2( void *pvParameters )
+{
+	( void ) pvParameters;
+
+	for( ;; )
+	{
+		asm(	"LDI	r31,	1"		);		
+		asm( 	"MOV	r0,		r31"	);
+		asm(	"LDI	r31,	2"		);
+		asm( 	"MOV	r1,		r31"	);
+		asm(	"LDI	r31,	3"		);
+		asm( 	"MOV	r2,		r31"	);
+		asm(	"LDI	r31,	4"		);
+		asm( 	"MOV	r3,		r31"	);
+		asm(	"LDI	r31,	5"		);
+		asm( 	"MOV	r4,		r31"	);
+		asm(	"LDI	r31,	6"		);
+		asm( 	"MOV	r5,		r31"	);
+		asm(	"LDI	r31,	7"		);
+		asm( 	"MOV	r6,		r31"	);
+		asm(	"LDI	r31,	8"		);
+		asm( 	"MOV	r7,		r31"	);
+		asm(	"LDI	r31,	9"		);
+		asm( 	"MOV	r8,		r31"	);
+		asm(	"LDI	r31,	10"		);
+		asm( 	"MOV	r9,		r31"	);
+		asm(	"LDI	r31,	11"		);
+		asm( 	"MOV	r10,	r31"	);
+		asm(	"LDI	r31,	12"		);
+		asm( 	"MOV	r11,	r31"	);
+		asm(	"LDI	r31,	13"		);
+		asm( 	"MOV	r12,	r31"	);
+		asm(	"LDI	r31,	14"		);
+		asm( 	"MOV	r13,	r31"	);
+		asm(	"LDI	r31,	15"		);
+		asm( 	"MOV	r14,	r31"	);
+		asm(	"LDI	r31,	16"		);
+		asm( 	"MOV	r15,	r31"	);
+		asm(	"LDI	r16,	17"		);
+		asm(	"LDI	r17,	18"		);
+		asm(	"LDI	r18,	19"		);
+		asm(	"LDI	r19,	20"		);
+		asm(	"LDI	r20,	21"		);
+		asm(	"LDI	r21,	22"		);
+		asm(	"LDI	r22,	23"		);
+		asm(	"LDI	r23,	24"		);
+		asm(	"LDI	r24,	25"		);
+		asm(	"LDI	r25,	26"		);
+		asm(	"LDI	r26,	27"		);
+		asm(	"LDI	r27,	28"		);
+		asm(	"LDI	r30,	29"		);
+
+		asm(	"LDI	r31,	1"			);
+		asm(	"CPSE	r31,	r0"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	2"			);
+		asm(	"CPSE	r31,	r1"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	3"			);
+		asm(	"CPSE	r31,	r2"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	4"			);
+		asm(	"CPSE	r31,	r3"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	5"			);
+		asm(	"CPSE	r31,	r4"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	6"			);
+		asm(	"CPSE	r31,	r5"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	7"			);
+		asm(	"CPSE	r31,	r6"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	8"			);
+		asm(	"CPSE	r31,	r7"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	9"			);
+		asm(	"CPSE	r31,	r8"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	10"			);
+		asm(	"CPSE	r31,	r9"			);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	11"			);
+		asm(	"CPSE	r31,	r10"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	12"			);
+		asm(	"CPSE	r31,	r11"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	13"			);
+		asm(	"CPSE	r31,	r12"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	14"			);
+		asm(	"CPSE	r31,	r13"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	15"			);
+		asm(	"CPSE	r31,	r14"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	16"			);
+		asm(	"CPSE	r31,	r15"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	17"			);
+		asm(	"CPSE	r31,	r16"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	18"			);
+		asm(	"CPSE	r31,	r17"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	19"			);
+		asm(	"CPSE	r31,	r18"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	20"			);
+		asm(	"CPSE	r31,	r19"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	21"			);
+		asm(	"CPSE	r31,	r20"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	22"			);
+		asm(	"CPSE	r31,	r21"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	23"			);
+		asm(	"CPSE	r31,	r22"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	24"			);
+		asm(	"CPSE	r31,	r23"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	25"			);
+		asm(	"CPSE	r31,	r24"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	26"			);
+		asm(	"CPSE	r31,	r25"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	27"			);
+		asm(	"CPSE	r31,	r26"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	28"			);
+		asm(	"CPSE	r31,	r27"		);
+		asm(	"STS	xRegTestError, r0"	);
+		asm(	"LDI	r31,	29"			);
+		asm(	"CPSE	r31,	r30"		);
+		asm(	"STS	xRegTestError, r0"	);
+	}
+}
+

Micropendous/libs/FreeRTOS/Demo/AVR_ATMega323_WinAVR/regtest.h

@@ -0,0 +1,82 @@
+/*
+    FreeRTOS V7.4.0 - Copyright (C) 2013 Real Time Engineers Ltd.
+
+    FEATURES AND PORTS ARE ADDED TO FREERTOS ALL THE TIME.  PLEASE VISIT
+    http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+     *    Complete, revised, and edited pdf reference manuals are also       *
+     *    available.                                                         *
+     *                                                                       *
+     *    Purchasing FreeRTOS documentation will not only help you, by       *
+     *    ensuring you get running as quickly as possible and with an        *
+     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+     *    the FreeRTOS project to continue with its mission of providing     *
+     *    professional grade, cross platform, de facto standard solutions    *
+     *    for microcontrollers - completely free of charge!                  *
+     *                                                                       *
+     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+     *                                                                       *
+     *    Thank you for using FreeRTOS, and thank you for your support!      *
+     *                                                                       *
+    ***************************************************************************
+
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+
+    >>>>>>NOTE<<<<<< The modification to the GPL is included to allow you to
+    distribute a combined work that includes FreeRTOS without being obliged to
+    provide the source code for proprietary components outside of the FreeRTOS
+    kernel.
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+    details. You should have received a copy of the GNU General Public License
+    and the FreeRTOS license exception along with FreeRTOS; if not itcan be
+    viewed here: http://www.freertos.org/a00114.html and also obtained by
+    writing to Real Time Engineers Ltd., contact details for whom are available
+    on the FreeRTOS WEB site.
+
+    1 tab == 4 spaces!
+
+    ***************************************************************************
+     *                                                                       *
+     *    Having a problem?  Start by reading the FAQ "My application does   *
+     *    not run, what could be wrong?"                                     *
+     *                                                                       *
+     *    http://www.FreeRTOS.org/FAQHelp.html                               *
+     *                                                                       *
+    ***************************************************************************
+
+
+    http://www.FreeRTOS.org - Documentation, books, training, latest versions, 
+    license and Real Time Engineers Ltd. contact details.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, and our new
+    fully thread aware and reentrant UDP/IP stack.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High 
+    Integrity Systems, who sell the code with commercial support, 
+    indemnification and middleware, under the OpenRTOS brand.
+    
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety 
+    engineered and independently SIL3 certified version for use in safety and 
+    mission critical applications that require provable dependability.
+*/
+
+#ifndef REG_TEST_H
+#define REG_TEST_H
+
+void vStartRegTestTasks( void );
+portBASE_TYPE xAreRegTestTasksStillRunning( void );
+
+#endif
+

Micropendous/libs/FreeRTOS/Demo/AVR_ATMega323_WinAVR/serial/serial.c

@@ -0,0 +1,269 @@
+/*
+    FreeRTOS V7.4.0 - Copyright (C) 2013 Real Time Engineers Ltd.
+
+    FEATURES AND PORTS ARE ADDED TO FREERTOS ALL THE TIME.  PLEASE VISIT
+    http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+     *    Complete, revised, and edited pdf reference manuals are also       *
+     *    available.                                                         *
+     *                                                                       *
+     *    Purchasing FreeRTOS documentation will not only help you, by       *
+     *    ensuring you get running as quickly as possible and with an        *
+     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+     *    the FreeRTOS project to continue with its mission of providing     *
+     *    professional grade, cross platform, de facto standard solutions    *
+     *    for microcontrollers - completely free of charge!                  *
+     *                                                                       *
+     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+     *                                                                       *
+     *    Thank you for using FreeRTOS, and thank you for your support!      *
+     *                                                                       *
+    ***************************************************************************
+
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+
+    >>>>>>NOTE<<<<<< The modification to the GPL is included to allow you to
+    distribute a combined work that includes FreeRTOS without being obliged to
+    provide the source code for proprietary components outside of the FreeRTOS
+    kernel.
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+    details. You should have received a copy of the GNU General Public License
+    and the FreeRTOS license exception along with FreeRTOS; if not itcan be
+    viewed here: http://www.freertos.org/a00114.html and also obtained by
+    writing to Real Time Engineers Ltd., contact details for whom are available
+    on the FreeRTOS WEB site.
+
+    1 tab == 4 spaces!
+
+    ***************************************************************************
+     *                                                                       *
+     *    Having a problem?  Start by reading the FAQ "My application does   *
+     *    not run, what could be wrong?"                                     *
+     *                                                                       *
+     *    http://www.FreeRTOS.org/FAQHelp.html                               *
+     *                                                                       *
+    ***************************************************************************
+
+
+    http://www.FreeRTOS.org - Documentation, books, training, latest versions, 
+    license and Real Time Engineers Ltd. contact details.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, and our new
+    fully thread aware and reentrant UDP/IP stack.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High 
+    Integrity Systems, who sell the code with commercial support, 
+    indemnification and middleware, under the OpenRTOS brand.
+    
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety 
+    engineered and independently SIL3 certified version for use in safety and 
+    mission critical applications that require provable dependability.
+*/
+
+/*
+Changes from V1.2.3
+
+	+ The function xPortInitMinimal() has been renamed to 
+	  xSerialPortInitMinimal() and the function xPortInit() has been renamed
+	  to xSerialPortInit().
+
+Changes from V2.0.0
+
+	+ Delay periods are now specified using variables and constants of
+	  portTickType rather than unsigned long.
+	+ xQueueReceiveFromISR() used in place of xQueueReceive() within the ISR.
+
+Changes from V2.6.0
+
+	+ Replaced the inb() and outb() functions with direct memory
+	  access.  This allows the port to be built with the 20050414 build of
+	  WinAVR.
+*/
+
+/* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER. */
+
+
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include "FreeRTOS.h"
+#include "queue.h"
+#include "task.h"
+#include "serial.h"
+
+#define serBAUD_DIV_CONSTANT			( ( unsigned long ) 16 )
+
+/* Constants for writing to UCSRB. */
+#define serRX_INT_ENABLE				( ( unsigned char ) 0x80 )
+#define serRX_ENABLE					( ( unsigned char ) 0x10 )
+#define serTX_ENABLE					( ( unsigned char ) 0x08 )
+#define serTX_INT_ENABLE				( ( unsigned char ) 0x20 )
+
+/* Constants for writing to UCSRC. */
+#define serUCSRC_SELECT					( ( unsigned char ) 0x80 )
+#define serEIGHT_DATA_BITS				( ( unsigned char ) 0x06 )
+
+static xQueueHandle xRxedChars; 
+static xQueueHandle xCharsForTx; 
+
+#define vInterruptOn()										\
+{															\
+	unsigned char ucByte;								\
+															\
+	ucByte = UCSRB;											\
+	ucByte |= serTX_INT_ENABLE;								\
+	UCSRB = ucByte;											\
+}																				
+/*-----------------------------------------------------------*/
+
+#define vInterruptOff()										\
+{															\
+	unsigned char ucInByte;								\
+															\
+	ucInByte = UCSRB;										\
+	ucInByte &= ~serTX_INT_ENABLE;							\
+	UCSRB = ucInByte;										\
+}
+/*-----------------------------------------------------------*/
+
+xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
+{
+unsigned long ulBaudRateCounter;
+unsigned char ucByte;
+
+	portENTER_CRITICAL();
+	{
+		/* Create the queues used by the com test task. */
+		xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
+		xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
+
+		/* Calculate the baud rate register value from the equation in the
+		data sheet. */
+		ulBaudRateCounter = ( configCPU_CLOCK_HZ / ( serBAUD_DIV_CONSTANT * ulWantedBaud ) ) - ( unsigned long ) 1;
+
+		/* Set the baud rate. */	
+		ucByte = ( unsigned char ) ( ulBaudRateCounter & ( unsigned long ) 0xff );	
+		UBRRL = ucByte;
+
+		ulBaudRateCounter >>= ( unsigned long ) 8;
+		ucByte = ( unsigned char ) ( ulBaudRateCounter & ( unsigned long ) 0xff );	
+		UBRRH = ucByte;
+
+		/* Enable the Rx interrupt.  The Tx interrupt will get enabled
+		later. Also enable the Rx and Tx. */
+		UCSRB = ( serRX_INT_ENABLE | serRX_ENABLE | serTX_ENABLE );
+
+		/* Set the data bits to 8. */
+		UCSRC = ( serUCSRC_SELECT | serEIGHT_DATA_BITS );
+	}
+	portEXIT_CRITICAL();
+	
+	/* Unlike other ports, this serial code does not allow for more than one
+	com port.  We therefore don't return a pointer to a port structure and can
+	instead just return NULL. */
+	return NULL;
+}
+/*-----------------------------------------------------------*/
+
+signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, portTickType xBlockTime )
+{
+	/* Only one port is supported. */
+	( void ) pxPort;
+
+	/* Get the next character from the buffer.  Return false if no characters
+	are available, or arrive before xBlockTime expires. */
+	if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
+	{
+		return pdTRUE;
+	}
+	else
+	{
+		return pdFALSE;
+	}
+}
+/*-----------------------------------------------------------*/
+
+signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, portTickType xBlockTime )
+{
+	/* Only one port is supported. */
+	( void ) pxPort;
+
+	/* Return false if after the block time there is no room on the Tx queue. */
+	if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
+	{
+		return pdFAIL;
+	}
+
+	vInterruptOn();
+
+	return pdPASS;
+}
+/*-----------------------------------------------------------*/
+
+void vSerialClose( xComPortHandle xPort )
+{
+unsigned char ucByte;
+
+	/* The parameter is not used. */
+	( void ) xPort;
+
+	/* Turn off the interrupts.  We may also want to delete the queues and/or
+	re-install the original ISR. */
+
+	portENTER_CRITICAL();
+	{
+		vInterruptOff();
+		ucByte = UCSRB;
+		ucByte &= ~serRX_INT_ENABLE;
+		UCSRB = ucByte;
+	}
+	portEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+SIGNAL( SIG_UART_RECV )
+{
+signed char cChar;
+signed portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
+
+	/* Get the character and post it on the queue of Rxed characters.
+	If the post causes a task to wake force a context switch as the woken task
+	may have a higher priority than the task we have interrupted. */
+	cChar = UDR;
+
+	xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
+
+	if( xHigherPriorityTaskWoken != pdFALSE )
+	{
+		taskYIELD();
+	}
+}
+/*-----------------------------------------------------------*/
+
+SIGNAL( SIG_UART_DATA )
+{
+signed char cChar, cTaskWoken;
+
+	if( xQueueReceiveFromISR( xCharsForTx, &cChar, &cTaskWoken ) == pdTRUE )
+	{
+		/* Send the next character queued for Tx. */
+		UDR = cChar;
+	}
+	else
+	{
+		/* Queue empty, nothing to send. */
+		vInterruptOff();
+	}
+}
+

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/00index_e.html

@@ -0,0 +1,101 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="alternate" hreflang="ja" title="Japanese version" href="00index_j.html">
+<link rel="stylesheet" href="css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>ELM - FAT File System Module</title>
+</head>
+
+<body>
+<h1>FAT File System Module</h1>
+<hr>
+
+<div class="abst">
+<img src="img/layers.png" class="rset" width="245" height="255" alt="layer">
+<p>FatFs is a generic FAT file system module for small embedded systems. The FatFs is written in compliance with ANSI C and completely separated from the disk I/O layer. Therefore it is independent of hardware architecture. It can be incorporated into low cost microcontrollers, such as AVR, 8051, PIC, ARM, Z80 and etc..., without any change. Petit FatFs module is also available <a href="http://elm-chan.org/fsw/ff/00index_p.html">here</a>.</p>
+
+<h4>Features</h4>
+<ul>
+ <li>Windows compatible FAT12/16/32 file system.</li>
+ <li>Platform independent. Easy to port.</li>
+ <li>Very small footprint for code and work area.</li>
+ <li>Various configuration options:
+  <ul>
+   <li>Multiple volumes (physical drives and partitions).</li>
+   <li>Multiple OEM code pages including DBCS.</li>
+   <li>Long file name (LFN) support in OEM code or Unicode.</li>
+   <li>RTOS support.</li>
+   <li>Multiple sector size support.</li>
+   <li>Read-only, minimized API, I/O buffer and etc...</li>
+  </ul>
+ </li>
+</ul>
+</div>
+
+
+<div class="para">
+<h3>Application Interface</h3>
+<p>FatFs module provides following functions to access the FAT volumes.</p>
+<ul>
+<li><a href="en/mount.html">f_mount</a> - Register/Unregister a Work Area</li>
+<li><a href="en/open.html">f_open</a> - Open/Create a File</li>
+<li><a href="en/close.html">f_close</a> - Close a File</li>
+<li><a href="en/read.html">f_read</a> - Read File</li>
+<li><a href="en/write.html">f_write</a> - Write File</li>
+<li><a href="en/lseek.html">f_lseek</a> - Move R/W Pointer, Expand File Size</li>
+<li><a href="en/truncate.html">f_truncate</a> - Truncate File Size</li>
+<li><a href="en/sync.html">f_sync</a> - Flush Cached Data</li>
+<li><a href="en/opendir.html">f_opendir</a> - Open a Directory</li>
+<li><a href="en/readdir.html">f_readdir</a> - Read a Directory Item</li>
+<li><a href="en/getfree.html">f_getfree</a> - Get Free Clusters</li>
+<li><a href="en/stat.html">f_stat</a> - Get File Status</li>
+<li><a href="en/mkdir.html">f_mkdir</a> - Create a Directory</li>
+<li><a href="en/unlink.html">f_unlink</a> - Remove a File or Directory</li>
+<li><a href="en/chmod.html">f_chmod</a> - Change Attribute</li>
+<li><a href="en/utime.html">f_utime</a> - Change Timestamp</li>
+<li><a href="en/rename.html">f_rename</a> - Rename/Move a File or Directory</li>
+<li><a href="en/mkfs.html">f_mkfs</a> - Create a File System on the Drive</li>
+<li><a href="en/forward.html">f_forward</a> - Forward file data to the stream directly</li>
+<li><a href="en/chdir.html">f_chdir</a> - Change current directory</li>
+<li><a href="en/chdrive.html">f_chdrive</a> - Change current drive</li>
+<li><a href="en/gets.html">f_gets</a> - Read a string</li>
+<li><a href="en/putc.html">f_putc</a> - Write a character</li>
+<li><a href="en/puts.html">f_puts</a> - Write a string</li>
+<li><a href="en/printf.html">f_printf</a> - Write a formatted string</li>
+</ul>
+</div>
+
+
+<div class="para">
+<h3>Disk I/O Interface</h3>
+<p>Since the FatFs module is completely separated from disk I/O layer, it requires following functions to lower layer to read/write the physical disk and to get current time. The low level disk I/O module is not a part of FatFs module so that it must be provided by user. The sample drivers are also available in the resources.</p>
+<ul>
+<li><a href="en/dinit.html">disk_initialize</a> - Initialize disk drive</li>
+<li><a href="en/dstat.html">disk_status</a> - Get disk status</li>
+<li><a href="en/dread.html">disk_read</a> - Read sector(s)</li>
+<li><a href="en/dwrite.html">disk_write</a> - Write sector(s)</li>
+<li><a href="en/dioctl.html">disk_ioctl</a> - Control device dependent features</li>
+<li><a href="en/fattime.html">get_fattime</a> - Get current time</li>
+</ul>
+</div>
+
+
+<div class="para">
+<h3>Resources</h3>
+<p>The FatFs module is a free software opened for education, research and development. You can use, modify and/or republish it for personal, non-profit use or commercial products without any restriction under your responsibility.</p>
+<ul>
+<li><a href="http://elm-chan.org/fsw/ff/bd/"><em>FatFs User Forum</em></a></li>
+<li><a href="en/appnote.html">FatFs module application note</a></li>
+<li><a href="http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/">ARM-Projects by Martin THOMAS</a> (examples for LPC2000, AT91SAM and STM32)</li>
+<li><a href="http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx">FAT32 Specification by Microsoft</a> (The reference document on FAT file system)</li>
+<li><a href="http://elm-chan.org/docs/mmc/mmc_e.html">How to Use MMC/SDC</a></li>
+<li><a href="img/rwtest.png">Benchmark 1</a> (ATmega64/9.2MHz with MMC via SPI, HDD/CFC via GPIO)</li>
+<li><a href="img/rwtest2.png">Benchmark 2</a> (LPC2368/72MHz with MMC via MCI)</li>
+</ul>
+</div>
+
+
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/00index_j.html

@@ -0,0 +1,102 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="alternate" hreflang="en" title="<22>p<EFBFBD><70>" href="00index_e.html">
+<link rel="stylesheet" href="css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>ELM - <20>ėpFAT<41>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>E<EFBFBD><45><EFBFBD>W<EFBFBD><57><EFBFBD>[<5B><></title>
+</head>
+
+<body>
+<h1>FAT<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>E<EFBFBD><45><EFBFBD>W<EFBFBD><57><EFBFBD>[<5B><></h1>
+<hr>
+
+<div class="abst">
+<img src="img/layers.png" class="rset" width="245" height="255" alt="layer">
+<p>FatFs<EFBFBD>͏<EFBFBD><EFBFBD>K<EFBFBD>͂ȑg<EFBFBD>ݍ<EFBFBD><EFBFBD>݃V<EFBFBD>X<EFBFBD>e<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̔ėpFAT<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>E<EFBFBD><45><EFBFBD>W<EFBFBD><57><EFBFBD>[<5B><><EFBFBD>ł<EFBFBD><C582>BANSI C<><43><EFBFBD><EFBFBD><EFBFBD>Ńn<C583>[<5B>h<EFBFBD>E<EFBFBD>F<EFBFBD>A<EFBFBD>E<EFBFBD>A<EFBFBD>[<5B>L<EFBFBD>e<EFBFBD>N<EFBFBD>`<60><><EFBFBD>ɂ͈ˑ<CD88><CB91><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>̂ŁA<C581>K<EFBFBD>v<EFBFBD>ȃ<EFBFBD><C883>[<5B>N<EFBFBD>E<EFBFBD>G<EFBFBD><47><EFBFBD>A<EFBFBD><41><EFBFBD>m<EFBFBD>ۂł<DB82><C582><EFBFBD><EFBFBD>΁A8051, PIC, AVR, SH, Z80, H8, ARM<52>ȂLj<C882><C788><EFBFBD><EFBFBD>ȃ}<7D>C<EFBFBD>R<EFBFBD><52><EFBFBD>ł<EFBFBD><C582>g<EFBFBD>p<EFBFBD>”\<5C>ł<EFBFBD><C582>BFatFs<46><73><EFBFBD>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>N<EFBFBD><4E><EFBFBD><EFBFBD><a href="00index_p.html"><EFBFBD>Ղ<EFBFBD>FatFs</a><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+<h4>FatFs<EFBFBD><EFBFBD><EFBFBD>W<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>̓<EFBFBD><CC93><EFBFBD></h4>
+<ul>
+ <li>Windows<EFBFBD>݊<EFBFBD> FAT12/16/32<33>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65></li>
+ <li><EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>b<EFBFBD>g<EFBFBD>t<EFBFBD>H<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>ˑ<EFBFBD></li>
+ <li><EFBFBD>R<EFBFBD><EFBFBD><EFBFBD>p<EFBFBD>N<EFBFBD>g<EFBFBD>ȃR<EFBFBD>[<5B>h<EFBFBD>E<EFBFBD>T<EFBFBD>C<EFBFBD>Y<EFBFBD><59>RAM<41>g<EFBFBD>p<EFBFBD><70></li>
+ <li><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̍\<5C><><EFBFBD>I<EFBFBD>v<EFBFBD>V<EFBFBD><56><EFBFBD><EFBFBD>:
+  <ul>
+   <li><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̃{<7B><><EFBFBD><EFBFBD><EFBFBD>[<5B><>(<28><><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>E<EFBFBD><45><EFBFBD><EFBFBD>)</li>
+   <li>DBCS<EFBFBD><EFBFBD><EFBFBD>܂ޕ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>OEM<EFBFBD>R<EFBFBD>[<5B>h<EFBFBD>E<EFBFBD>y<EFBFBD>[<5B>W</li>
+   <li><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD>(LFN)<29>Ή<EFBFBD> (Unicode API<50><49><EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD>)</li>
+   <li><EFBFBD>}<7D><><EFBFBD>`<60>^<5E>X<EFBFBD>N<EFBFBD>Ή<EFBFBD></li>
+   <li><EFBFBD>}<7D><><EFBFBD>`<60>E<EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E>E<EFBFBD>T<EFBFBD>C<EFBFBD>Y<EFBFBD>Ή<EFBFBD></li>
+   <li><EFBFBD><EFBFBD><EFBFBD>[<5B>h<EFBFBD>E<EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD>[<5B>A<EFBFBD>ꕔAPI<50>̍폜<CC8D>A<EFBFBD>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40>\<5C><><EFBFBD>A<EFBFBD><41><EFBFBD>̑<EFBFBD><CC91>c</li>
+  </ul>
+ </li>
+</ul>
+</div>
+
+
+<div class="para">
+<h3><EFBFBD><EFBFBD><EFBFBD>ʃ<EFBFBD><EFBFBD>C<EFBFBD><EFBFBD>I/F</h3>
+<p>FatFs<EFBFBD><EFBFBD><EFBFBD>W<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>́A<CD81><41><EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>֐<EFBFBD><D690><EFBFBD><EFBFBD>񋟂<EFBFBD><F18B9F82>Ă<EFBFBD><C482>܂<EFBFBD><DC82>B</p>
+<ul>
+<li><a href="ja/mount.html">f_mount</a> - <20><><EFBFBD>[<5B>N<EFBFBD>G<EFBFBD><47><EFBFBD>A<EFBFBD>̓o<CC93>^<5E>E<EFBFBD>폜</li>
+<li><a href="ja/open.html">f_open</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̃I<CC83>[<5B>v<EFBFBD><76><EFBFBD>E<EFBFBD>쐬</li>
+<li><a href="ja/close.html">f_close</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̃N<CC83><4E><EFBFBD>[<5B>Y</li>
+<li><a href="ja/read.html">f_read</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̓ǂݍ<C782><DD8D><EFBFBD></li>
+<li><a href="ja/write.html">f_write</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̏<EFBFBD><CC8F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></li>
+<li><a href="ja/lseek.html">f_lseek</a> - R/W<>|<7C>C<EFBFBD><43><EFBFBD>^<5E>̈ړ<CC88>, <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>T<EFBFBD>C<EFBFBD>Y<EFBFBD>̊g<CC8A><67></li>
+<li><a href="ja/truncate.html">f_truncate</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>T<EFBFBD>C<EFBFBD>Y<EFBFBD>̐؂<CC90><D882>l<EFBFBD><6C></li>
+<li><a href="ja/sync.html">f_sync</a> - <20>L<EFBFBD><4C><EFBFBD>b<EFBFBD>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD>f<EFBFBD>[<5B>^<5E>̃t<CC83><74><EFBFBD>b<EFBFBD>V<EFBFBD><56></li>
+<li><a href="ja/opendir.html">f_opendir</a> - <20>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̃I<CC83>[<5B>v<EFBFBD><76></li>
+<li><a href="ja/readdir.html">f_readdir</a> - <20>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̓ǂݏo<DD8F><6F></li>
+<li><a href="ja/getfree.html">f_getfree</a> - <20>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>󂫗̈<F382AB97><CC88>̎擾</li>
+<li><a href="ja/stat.html">f_stat</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>X<EFBFBD>e<EFBFBD>[<5B>^<5E>X<EFBFBD>̎擾</li>
+<li><a href="ja/mkdir.html">f_mkdir</a> - <20>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̍쐬</li>
+<li><a href="ja/unlink.html">f_unlink</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43>/<2F>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̍폜</li>
+<li><a href="ja/chmod.html">f_chmod</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43>/<2F>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̑<EFBFBD><CC91><EFBFBD><EFBFBD>̕ύX</li>
+<li><a href="ja/utime.html">f_utime</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43>/<2F>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̃^<5E>C<EFBFBD><43><EFBFBD>X<EFBFBD>^<5E><><EFBFBD>v<EFBFBD>̕ύX</li>
+<li><a href="ja/rename.html">f_rename</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43>/<2F>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̖<EFBFBD><CC96>O<EFBFBD>ύX<CF8D>E<EFBFBD>ړ<EFBFBD></li>
+<li><a href="ja/mkfs.html">f_mkfs</a> - <20>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>̃t<CC83>H<EFBFBD>[<5B>}<7D>b<EFBFBD>g</li>
+<li><a href="ja/chdir.html">f_chdir</a> - <20>J<EFBFBD><4A><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̕ύX</li>
+<li><a href="ja/chdrive.html">f_chdrive</a> - <20>J<EFBFBD><4A><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>̕ύX</li>
+<li><a href="ja/forward.html">f_forward</a> - <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>f<EFBFBD>[<5B>^<5E><><EFBFBD>X<EFBFBD>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD>֐<EFBFBD><D690>ɒ<EFBFBD><C992>ړ]<5D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD></li>
+<li><a href="ja/gets.html">f_gets</a> - <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̓ǂݍ<C782><DD8D><EFBFBD></li>
+<li><a href="ja/putc.html">f_putc</a> - <20><><EFBFBD><EFBFBD><EFBFBD>̏<EFBFBD><CC8F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></li>
+<li><a href="ja/puts.html">f_puts</a> - <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̏<EFBFBD><CC8F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></li>
+<li><a href="ja/printf.html">f_printf</a> - <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̏<EFBFBD><CC8F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></li>
+</ul>
+</div>
+
+
+<div class="para">
+<h3><EFBFBD><EFBFBD><EFBFBD>ʃ<EFBFBD><EFBFBD>C<EFBFBD><EFBFBD>I/F</h3>
+<p>FatFs<EFBFBD><EFBFBD><EFBFBD>W<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>́A<CD81><41><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD><75><EFBFBD>ւ̃A<CC83>N<EFBFBD>Z<EFBFBD>X<EFBFBD>̂<EFBFBD><CC82>߁A<DF81><41><EFBFBD>ʃ<EFBFBD><CA83>C<EFBFBD><43><EFBFBD>Ɏ<EFBFBD><C98E>̃C<CC83><43><EFBFBD>^<5E>[<5B>t<EFBFBD>F<EFBFBD>[<5B>X<EFBFBD><58><EFBFBD>v<EFBFBD><76><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B<EFBFBD><42><EFBFBD>ꂼ<EFBFBD><EA82BC><EFBFBD>̋L<CC8B>^<5E><><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD>ɑΉ<C991><CE89><EFBFBD><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>NI/O<><4F><EFBFBD>W<EFBFBD><57><EFBFBD>[<5B><><EFBFBD>́A<CD81><41><EFBFBD>[<5B>U<EFBFBD>ɂ<EFBFBD><C982><EFBFBD><EFBFBD>ėp<C497>ӂ<EFBFBD><D382><EFBFBD><EFBFBD><EFBFBD><EFBFBD>K<EFBFBD>v<EFBFBD><76><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B<EFBFBD><42><EFBFBD><EFBFBD><EFBFBD>Ƀh<C983><68><EFBFBD>C<EFBFBD>o<EFBFBD><6F><EFBFBD>܂ރT<DE83><54><EFBFBD>v<EFBFBD><76><EFBFBD>E<EFBFBD>v<EFBFBD><76><EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>B</p>
+<ul>
+<li><a href="ja/dinit.html">disk_initialize</a> - <20>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>̏<EFBFBD><CC8F><EFBFBD><EFBFBD><EFBFBD></li>
+<li><a href="ja/dstat.html">disk_status</a> - <20>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>̏<EFBFBD><CC8F>Ԏ擾</li>
+<li><a href="ja/dread.html">disk_read</a> - <20>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD><4E><EFBFBD><EFBFBD><EFBFBD>̓ǂݍ<C782><DD8D><EFBFBD></li>
+<li><a href="ja/dwrite.html">disk_write</a> - <20>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>ւ̏<D682><CC8F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></li>
+<li><a href="ja/dioctl.html">disk_ioctl</a> - <20><><EFBFBD>̑<EFBFBD><CC91>̃h<CC83><68><EFBFBD>C<EFBFBD>u<EFBFBD><75><EFBFBD><EFBFBD></li>
+<li><a href="ja/fattime.html">get_fattime</a> - <20><><EFBFBD>t<EFBFBD>E<EFBFBD><45><EFBFBD><EFBFBD><EFBFBD>̎擾</li>
+</ul>
+</div>
+
+
+<div class="para">
+<h3><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h3>
+<p>FatFs<EFBFBD><EFBFBD><EFBFBD>W<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>̓t<CD83><74><EFBFBD>[<5B>E<EFBFBD>\<5C>t<EFBFBD>g<EFBFBD>E<EFBFBD>F<EFBFBD>A<EFBFBD>Ƃ<EFBFBD><C682>ċ<EFBFBD><C48B><EFBFBD><EFBFBD>E<EFBFBD><45><EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>J<EFBFBD><4A><EFBFBD>p<EFBFBD>Ɍ<EFBFBD><C98C>J<EFBFBD><4A><EFBFBD>Ă<EFBFBD><C482>܂<EFBFBD><DC82>B<EFBFBD>ǂ̂悤<CC82>ȗ<EFBFBD><C897>p<EFBFBD>ړI<DA93>i<EFBFBD>l<C290>E<EFBFBD>񏤗p<F18FA497>E<EFBFBD><45><EFBFBD>p<EFBFBD>j<EFBFBD>ł<EFBFBD><C582>g<EFBFBD>p<EFBFBD>E<EFBFBD><45><EFBFBD>ρE<CF81>z<EFBFBD>z<EFBFBD>ɂ‚<C982><C282>Ĉ<EFBFBD><C488>؂̐<D882><CC90><EFBFBD><EFBFBD>͂<EFBFBD><CD82><EFBFBD><EFBFBD>܂<EFBFBD><DC82>񂪁A<F182AA81>S<EFBFBD>ė<EFBFBD><C497>p<EFBFBD>҂̐ӔC<D394>̉<EFBFBD><CC89>ł̗<C582><CC97>p<EFBFBD>Ƃ<EFBFBD><C682>܂<EFBFBD><DC82>B</p>
+<ul>
+<li><a href="http://elm-chan.org/fsw/ff/bd/"><em>FatFs<EFBFBD><EFBFBD><EFBFBD>[<5B>U<EFBFBD>E<EFBFBD>t<EFBFBD>H<EFBFBD>[<5B><><EFBFBD><EFBFBD></em></a></li>
+<li><a href="ja/appnote.html">FatFs<EFBFBD><EFBFBD><EFBFBD>W<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>E<EFBFBD>A<EFBFBD>v<EFBFBD><76><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>m<EFBFBD>[<5B>g</a></li>
+<li><a href="http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/">ARM-Projects by Martin THOMAS</a> (examples for LPC2000, AT91SAM and STM32)</li>
+<li><a href="http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx">FAT<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>d<EFBFBD>l<EFBFBD><6C> by Microsoft</a> (FAT<41>̗<EFBFBD><CC97><EFBFBD><EFBFBD>E<EFBFBD><45><EFBFBD><EFBFBD><EFBFBD>ɕK<C995>v<EFBFBD>ȗB<C897><42><EFBFBD>̃<EFBFBD><CC83>t<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD>X)</li>
+<li><a href="http://elm-chan.org/docs/fat.html">FAT<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>T<EFBFBD>v</a></li>
+<li><a href="http://elm-chan.org/docs/mmc/mmc.html">MMC<EFBFBD>̎g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></a></li>
+<li><a href="img/rwtest.png"><EFBFBD>p<EFBFBD>t<EFBFBD>H<EFBFBD>[<5B>}<7D><><EFBFBD>X<EFBFBD>E<EFBFBD>e<EFBFBD>X<EFBFBD>g1</a> (ATmega64/9.2MHz with MMC via SPI, HDD/CFC via GPIO)</li>
+<li><a href="img/rwtest2.png"><EFBFBD>p<EFBFBD>t<EFBFBD>H<EFBFBD>[<5B>}<7D><><EFBFBD>X<EFBFBD>E<EFBFBD>e<EFBFBD>X<EFBFBD>g2</a> (LPC2368/72MHz with MMC via MCI)</li>
+</ul>
+</div>
+
+
+<hr>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/css_e.css

@@ -0,0 +1,56 @@
+* {margin: 0; padding: 0; border-width: 0;}
+body {margin: 8px; background-color: #e0ffff; font-color: black; font-family: serif; line-height: 133%; max-width: 1024px;}
+a:link {color: blue;}
+a:visited {color: darkmagenta;}
+a:hover {background-color: #a0ffff;}
+a:active {color: darkmagenta; position: relative; top: 1px; left: 1px;}
+abbr {border-width: 1px;}
+
+p {margin: 0 0 0.3em 1em;}
+em {font-style: normal; font-weight: bold; margin: 0 0.1em;}
+pre em {font-style: italic; font-weight: normal;}
+strong {}
+pre {margin: 0.5em 1em; padding: 0.5em; line-height: 1.2em; background-color: white;}
+tt {margin: 0 0.2em;}
+ol {margin: 0 2.5em;}
+ul {margin: 0 2em;}
+dl {margin: 0 1em;}
+dt {font-family: monospace;}
+dl.par dt {margin: 0.5em 0 0 0 ; font-style: italic; }
+dl.ret dt {margin: 0.5em 0 0 0 ; font-weight: bold;}
+dd {margin: 0 2em;}
+hr {border-width: 1px; margin: 1em;}
+div.abst {font-family: sans-serif;}
+div.para {clear: both; font-family: serif;}
+.equ {text-indent: 0; margin: 1em 2em 1em;}
+.indent {margin-left: 2em;}
+.rset {float: right; margin: 0 0 0.5em 0.5em;}
+.lset {float: left; margin: 0 0.5em 0.5em 0.5em;}
+ul.flat li {list-style-type: none; margin: 0;}
+a.imglnk img {border: 1px solid;}
+.iequ {white-space: nowrap; font-weight: bold;}
+.clr {clear: both;}
+.it {font-style: italic;}
+.mfd {font-size: 0.7em; padding: 0 1px; border: 1px solid; white-space : nowrap}
+
+h1 {line-height: 1em; font-size: 2em; font-family: sans-serif; padding: 0.3em 0 0.3em;}
+p.hdd {float: right; text-align: right; margin-top: 0.5em;}
+hr.hds {clear: both; margin-bottom: 1em;}
+
+h2 {font-size: 1.5em; font-family: sans-serif; margin: 0 0 0.5em;}
+h3 {font-size: 1.5em; font-family: sans-serif; margin: 1.5em 0 0.5em;}
+h4 {font-size: 1.2em; font-family: sans-serif; margin: 1em 0 0.2em;}
+h5 {font-size: 1em; font-family: sans-serif; margin: 0.5em 0 0em;}
+small {font-size: 80%;}
+.indent {margin-left: 2em;}
+
+/* Tables */
+table {margin: 0.5em 1em; border-collapse: collapse; border-style: solid; border-width: 2px; border-color: black; }
+th {background-color: white; border-style: solid; border-width: 1px 1px 2px; border-color: black; padding: 0 3px; vertical-align: top; white-space: nowrap;}
+td {background-color: white; border-style: solid; border-width: 1px; border-color: black; padding: 0 3px; vertical-align: top; line-height: 1.3em;}
+table.lst td:first-child {font-family: monospace;}
+table.lst2 td {font-family: monospace;}
+table caption {font-family: sans-serif; font-weight: bold;}
+tr.lst3 td { border-width: 2px 1px 1px; }
+
+p.foot {clear: both; text-indent: 0; margin: 1em 0.5em 1em;}

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/css_j.css

@@ -0,0 +1,59 @@
+@charset "Shift_JIS";
+/* Common style sheet for Tech Notes */
+
+* {margin: 0; padding: 0; border-width: 0;}
+body {margin: 8px; background-color: #e0ffff; font-color: black; font-family:"<22>l<EFBFBD>r <20>o<EFBFBD><6F><EFBFBD><EFBFBD>", serif; line-height: 150%; letter-spacing: 1px; max-width: 1024px;}
+a:link {color: blue;}
+a:visited {color: darkmagenta;}
+a:hover {background-color: #a0ffff;}
+a:active {color: darkmagenta; position: relative; top: 1px; left: 1px;}
+abbr {border-width: 1px;}
+
+p {text-indent: 1em; margin: 0 0 0.3em 0.5em;}
+em {font-style: normal; font-weight: bold; margin: 0 0.1em;}
+pre em {font-style: italic; font-weight: normal;}
+strong {}
+pre {margin: 0.5em 1em; padding: 0.5em; line-height: 1.2em; letter-spacing: 0; background-color: white;}
+tt {margin: 0 0.2em; letter-spacing: 0;}
+ol {margin: 0 2.5em;}
+ul {margin: 0 2em;}
+dl {margin: 0 1em;}
+dt {font-family: monospace;}
+dl.par dt {margin: 0.5em 0 0 0 ; font-style: italic; letter-spacing: 0;}
+dl.ret dt {margin: 0.5em 0 0 0 ; font-family: monospace; letter-spacing: 0; font-weight: bold;}
+dd {margin: 0 2em;}
+hr {border-width: 1px; margin: 1em;}
+div.abst {font-family: "<22>l<EFBFBD>r <20>o<EFBFBD>S<EFBFBD>V<EFBFBD>b<EFBFBD>N",sans-serif;}
+div.para {clear: both; font-family: "<22>l<EFBFBD>r <20>o<EFBFBD><6F><EFBFBD><EFBFBD>",serif;}
+.equ {text-indent: 0; margin: 1em 2em 1em;}
+.indent {margin-left: 2em;}
+.rset {float: right; margin: 0 0 0.5em 0.5em;}
+.lset {float: left; margin: 0 0.5em 0.5em 0.5em;}
+ul.flat li {list-style-type: none; margin: 0;}
+a.imglnk img {border: 1px solid;}
+.iequ {white-space: nowrap; font-weight: bold;}
+.clr {clear: both;}
+.it {font-style: italic;}
+.mfd {font-size: 0.7em; padding: 0 1px; border: 1px solid; white-space : nowrap}
+
+h1 {line-height: 1em; font-size: 2em; font-family: sans-serif; padding: 0.3em 0 0.3em;}
+p.hdd {float: right; text-align: right; margin-top: 0.5em;}
+hr.hds {clear: both; margin-bottom: 1em;}
+
+h2 {font-size: 1.5em; font-family: "<22>l<EFBFBD>r <20>o<EFBFBD>S<EFBFBD>V<EFBFBD>b<EFBFBD>N",sans-serif; margin: 0 0 0.5em;}
+h3 {font-size: 1.5em; font-family: "<22>l<EFBFBD>r <20>o<EFBFBD>S<EFBFBD>V<EFBFBD>b<EFBFBD>N",sans-serif; margin: 1.5em 0 0.5em;}
+h4 {font-size: 1.2em; font-family: "<22>l<EFBFBD>r <20>o<EFBFBD>S<EFBFBD>V<EFBFBD>b<EFBFBD>N",sans-serif; margin: 1em 0 0.2em;}
+h5 {font-size: 1em; font-family: "<22>l<EFBFBD>r <20>o<EFBFBD>S<EFBFBD>V<EFBFBD>b<EFBFBD>N",sans-serif; margin: 0.5em 0 0em;}
+small {font-size: 80%;}
+.indent {margin-left: 2em;}
+
+/* Tables */
+table {margin: 0.5em 1em; border-collapse: collapse; border-style: solid; border-width: 2px; border-color: black; letter-spacing: 0;}
+th {background-color: white; border-style: solid; border-width: 1px 1px 2px; border-color: black; padding: 0 3px; vertical-align: top;}
+td {background-color: white; border-style: solid; border-width: 1px; border-color: black; padding: 0 3px; vertical-align: top; line-height: 1.3em;}
+table.lst td:first-child {font-family: monospace; white-space: nowrap;}
+table.lst2 td {font-family: monospace; white-space: nowrap;}
+table caption {font-family: sans-serif; font-weight: bold;}
+tr.lst3 td { border-width: 2px 1px 1px; }
+
+p.foot {clear: both; text-indent: 0; margin: 1em 0.5em 1em;}

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/appnote.html

@@ -0,0 +1,189 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs Module Application Note</title>
+</head>
+
+<body>
+<h1>FatFs Module Application Note</h1>
+<hr>
+
+<div class="para">
+<h3>Considerations on porting to various platform</h3>
+<p>The FatFs module is assuming following terms on portability.</p>
+<ul>
+<li>ANSI C<br>
+The FatFs module is a middleware that written in ANSI C. There is no platform dependence, so long as the compiler is in compliance with ANSI C.</li>
+<li>Size of integer types<br>
+The FatFs module assumes that size of char/short/long are 8/16/32-bit and int is 16 or 32 bit. These correspondence are defined in integer.h. This will not be a problem on most compilers. When any conflict with existing definitions is occured, you must resolve it with care.</li>
+</ul>
+</div>
+
+<div class="para">
+<h3>Memory Usage (R0.07e)</h3>
+<table class="lst2">
+<tr><th></th><th>AVR</th><th>H8/300H</th><th>PIC</th><th>TLCS-870/C</th><th>V850ES</th><th>SH2</th><th>ARM7TDMI</th><th>x86</th></tr>
+<tr><td>Compiler</td><td>WinAVR(gcc)</td><td>CH38</td><td>C30(gcc)</td><td>CC870C</td><td>CA850</td><td>SHC</td><td>WinARM(gcc)</td><td>VC6</td></tr>
+<tr><td>_WORD_ACCESS</td><td>1</td><td>0</td><td>0</td><td>1</td><td>1</td><td>0</td><td>0</td><td>1</td></tr>
+<tr class="lst3"><td>text (Full, R/W)</td><td>12194</td><td>10559</td><td>10924</td><td>15229</td><td>7686</td><td>8727</td><td>10564</td><td>7342</td></tr>
+<tr> <td>text (Min, R/W)</td><td>7988</td><td>6903</td><td>7108</td><td>9960</td><td>4884</td><td>5651</td><td>6544</td><td>4764</td></tr>
+<tr><td>text (Full, R/O)</td><td>5532</td><td>4753</td><td>5020</td><td>6760</td><td>3462</td><td>3777</td><td>4624</td><td>3316</td></tr>
+<tr> <td>text (Min, R/O)</td><td>4040</td><td>3631</td><td>3736</td><td>5083</td><td>2556</td><td>2907</td><td>3284</td><td>2510</td></tr>
+<tr><td>bss</td><td>D*2 + 2</td><td>D*4 + 2</td><td>D*2 + 2</td><td>D*2 + 2</td><td>D*4 + 2</td><td>D*4 + 2</td><td>D*4 + 2</td><td>D*4 + 2</td></tr>
+<tr><td>Work area<br>(_FS_TINY == 0)</td><td>D*560 +<br>F*544</td><td>D*560 +<br>F*550</td><td>D*560 +<br>F*544</td><td></td><td>D*560 +<br>F*550</td><td>D*560 +<br>F*550</td><td>D*560 +<br>F*550</td><td>D*560 +<br>F*550</td></tr>
+<tr><td>Work area<br>(_FS_TINY == 1)</td><td>D*560 +<br>F*32</td><td>D*560 +<br>F*36</td><td>D*560 +<br>F*32</td><td>D*560 +<br>F*32</td><td>D*560 +<br>F*36</td><td>D*560 +<br>F*36</td><td>D*560 +<br>F*36</td><td>D*560 +<br>F*36</td></tr>
+</table>
+<p>These are the memory usage on some target systems with following condition. The memory sizes are in unit of byte, D means number of volumes and F means number of open files. All samples are optimezed in code size.</p>
+<pre>
+_FS_READONLY     0 (R/W), 1 (R/O)
+_FS_MINIMIZE     0 (Full function), 3 (Minimized function)
+_USE_STRFUNC     0 (Disable string functions)
+_USE_MKFS        0 (Disable f_mkfs function)
+_USE_FORWARD     0 (Disable f_forward function)
+_CODE_PAGE       932 (Japanese Shift-JIS)
+_USE_LFN         0 (Disable LFN)
+_LFN_UNICODE     0 (Disable Unicode API)
+_MAX_SS          512 (Single sector size)
+_FS_RPATH        0 (Disable relative path)
+_MULTI_PARTITION 0 (Single partition per drive)
+_FS_REENTRANT    0 (Disable reentrancy)
+</pre>
+</div>
+
+<div class="para">
+<h3>Module Size Reduction</h3>
+<p>Follwing table shows which function is removed by configuration options for the module size reduction.</p>
+<table class="lst2">
+<tr><td rowspan="2">Function</td><td colspan="3">_FS_MINIMIZE</td><td>_FS_READONLY</td><td>_USE_STRFUNC</td><td>_FS_RPATH</td><td>_USE_MKFS</td><td>_USE_FORWARD</td></tr>
+<tr><td>1</td><td>2</td><td>3</td><td>1</td><td>0</td><td>0</td><td>0</td><td>0</td></tr>
+<tr class="lst3"><td>f_mount</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_open</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_close</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_read</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_write</td><td></td><td></td><td></td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_sync</td><td></td><td></td><td></td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_lseek</td><td></td><td></td><td>x</td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_opendir</td><td></td><td>x</td><td>x</td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_readdir</td><td></td><td>x</td><td>x</td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_stat</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_getfree</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_truncate</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_unlink</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_mkdir</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_chmod</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_utime</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_rename</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_chdir</td><td></td><td></td><td></td><td></td><td></td><td>x</td><td></td><td></td></tr>
+<tr><td>f_chdrive</td><td></td><td></td><td></td><td></td><td></td><td>x</td><td></td><td></td></tr>
+<tr><td>f_mkfs</td><td></td><td></td><td></td><td>x</td><td></td><td></td><td>x</td><td></td></tr>
+<tr><td>f_forward</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td>x</td></tr>
+<tr><td>f_putc</td><td></td><td></td><td></td><td>x</td><td>x</td><td></td><td></td><td></td></tr>
+<tr><td>f_puts</td><td></td><td></td><td></td><td>x</td><td>x</td><td></td><td></td><td></td></tr>
+<tr><td>f_printf</td><td></td><td></td><td></td><td>x</td><td>x</td><td></td><td></td><td></td></tr>
+<tr><td>f_gets</td><td></td><td></td><td></td><td></td><td>x</td><td></td><td></td><td></td></tr>
+</table>
+</div>
+
+<div class="para">
+<h3>Long File Name</h3>
+<p>The FatFs module supports long file name (LFN) from revision 0.07. The two different file names, SFN and LFN, of a file is transparent in the file functions except for f_readdir function. To enable LFN feature, set <tt>_USE_LFN</tt> to 1 or 2, and add a Unicode code conversion function ff_convert and ff_wtoupper to the project. This function is available in <tt>cc*.c</tt>. The LFN feature requiers a certain working buffer in addition. The buffer size can be configured by <tt>_MAX_LFN</tt> corresponding to the available memory size. The size of long file name will reach up to 255 characters so that the <tt>_MAX_LFN</tt> should be set to 255 for full featured LFN operation. When the size of working buffer is insufficient for the given file name, the file function will fail with <tt>FR_INVALID_NAME</tt>. When enable the LFN feature with re-entrant feature, <tt>_USE_LFN</tt> must be set to 2. In this case, the file funciton allocates the working buffer on the stack. The working buffer occupies <tt>(_MAX_LFN + 1) * 2</tt> bytes so that the caller's stack must be a sufficient size considering the working buffer.</p>
+<table class="lst2 rset">
+<caption>LFN cfg on ARM7</caption>
+<tr><th>Code page</th><th>ROM size [bytes]</th></tr>
+<tr><td>SBCS</td><td>+3721</td></tr>
+<tr><td>932(Shift-JIS)</td><td>+62609</td></tr>
+<tr><td>936(GBK)</td><td>+177797</td></tr>
+<tr><td>949(Korean)</td><td>+139857</td></tr>
+<tr><td>950(Big5)</td><td>+111497</td></tr>
+</table>
+<p>When the LFN feature is enabled, the module size will be increased depends on the selected code page. Right table shows the difference in module size when LFN is enabled with some code pages. We are the Japanese, Chinese and Korean have tens of thousands of characters. Unfortunately, it requires a huge OEM-Unicode bidirectional conversion table and the module size will be drastically increased that shown in the table. As the result, the FatFs with LFN will not able to be implemented to most 8-bit microcontrollers including AVR. <small>This is the reason why I had not been interested in implementing the LFN feature for a long time :-)</small></p>
+<p>Note that the LFN feature on the FAT file system is a patent of Microsoft Corporation. When enable it on the commercial products, a license from Microsoft may be required depends on the final destination.</p>
+</div>
+
+<div class="para">
+<h3>Re-entrancy</h3>
+<p>The file operations to the different volume can always work simultaneously regardless of re-entrancy setting. The re-entrancy to the same volume can be enabled with <tt>_FS_REENTRANT</tt> option. In this case, also the OS dependent synchronization object control functions, ff_cre_syncobj, ff_del_syncobj, ff_req_grant and ff_rel_grant must be added to the project. The sample code with documentation is available in <tt>syncobj.c</tt>.</p>
+<p>When a file function is called while the volume is in use by any other task, the access is blocked until the task leaves file function. If wait time exceeded a period defined by <tt>_TIMEOUT</tt>, the file function will abort with <tt>FR_TIMEOUT</tt>. The timeout feature might not be supported on some RTOS.</p>
+<p>There is an exception on f_mount and f_mkfs function. These functions are not re-entrant to the same volume. When use these functions, all other task must close the corresponding file on the volume and avoid to access the volume.</p>
+<p>Note that this section describes on the re-entrancy of the FatFs module itself. There is no assumtion on the re-entrancy of low level disk I/O module.</p>
+</div>
+
+<div class="para">
+<h3>Duplicated file access</h3>
+<p>FatFs module does not support the shareing controls of duplicated file access. It is permitted when open method to the file is only read mode. The duplicated open in write mode to a file is always prohibited and open file must not be renamed, deleted, otherwise the FAT structure on the volume can be collapted.</p>
+</div>
+
+<div class="para">
+<h3>Performance effective file access</h3>
+<p>For good performance on reading/writing files on the small embedded system, application programmer should consider what process is done in the FatFs module. The file data on the disk is transferred in following sequence by f_read function.</p>
+<p>Figure 1. Sector miss-aligned read (short)<br>
+<img src="../img/f1.png" width="490" height="73" alt="">
+</p>
+<p>Figure 2. Sector miss-aligned read (long)<br>
+<img src="../img/f2.png" width="490" height="140" alt="">
+</p>
+<p>Figure 3. Sector aligned read<br>
+<img src="../img/f3.png" width="490" height="119" alt="">
+</p>
+<p>The file I/O buffer means a sector buffer to read/write a partial data on the sector. The sector buffer is either file private sector buffer on each file object or shared sector buffer on the file system object. The buffer configuration option <tt>_FS_TINY</tt> determins which sector buffer is used for the file data transfer. When tiny buffer (1) is selected, data memory consumption is reduced 512 bytes each file object. In this case, FatFs module uses only a sector buffer on the file system object for file data transfer and FAT/directory access. The disadvantage of the tiny buffer configuration is: the FAT data cached in the sector buffer will be lost by file data transfer and it must be reloaded at every cluster boundary. However it will be suitable for most application from view point of the decent performance and low memory comsumption.</p>
+<p>Figure 1 shows that partial sector data is transferred via the file I/O buffer. On long data transfer shown in Figure 2, middle of transfer data that covers one or more sector is transferred to application buffer directly. Figure 3 shows that the case of entier transfer data is aligned to the sector boundary. In this case, file I/O buffer is not used. On the direct transfer, the maximum extent of sectors are read with disk_read function at a time but the multi sector transfer never across the cluster boundary even if it is contiguous.</p>
+<p>Therefore taking effort to sector aligned read/write accesss avoids buffered data transfer and the read/write performance will be improved. Besides the effect, cached FAT data will not be flushed by file data transfer on the tiny configuration so that it can achieve same performance as non tiny configuration with small memory footprint.</p>
+</div>
+
+<div class="para">
+<h3>Critical Section</h3>
+<p>When write operation to the FAT file system is interrupted due to any accidental failure, such as sudden blackout, incorrect disk removal and unrecoverable disk error, the FAT structure can be collapted. Following images shows the critical section on the FatFs application.</p>
+<div class="lset">
+Figure 4. Long critical section<br>
+<img src="../img/f4.png" width="320" height="436" alt="fig.4">
+</div>
+<div class="lset">
+Figure 5. Minimized critical section<br>
+<img src="../img/f5.png" width="320" height="436" alt="fig.5">
+</div>
+<br class="clr">
+<p>An interruption in the red section can cause a cross link; as a result, the file/directory being changed may be lost. There is one or more possibility listed below when an interruption in the yellow section is occured.</p>
+<ul>
+<li>File data being rewrited is collapted.</li>
+<li>A file being appended returns initial state.</li>
+<li>A file created as new is gone.</li>
+<li>A file created as new or in overwritten remains with length of zero.</li>
+<li>Efficiency of disk use gets worse due to lost chain.</li>
+</ul>
+<p>Each case does not affect the files that not in write mode open. To minimize risk of data loss, the critical section can be minimized like shown in Figure 5 by minimizing the time that file is opened in write mode or using f_sync function properly.</p>
+</div>
+
+<div class="para">
+<h3>Unicode API</h3>
+<p>FatFs supports OEM code set on the API in default but FatFs can also switch the code set to Unicode. For more information, refer to the description in the <a href="filename.html">file name</a>.</p>
+</div>
+
+
+<div class="para">
+<h3>About FatFs License</h3>
+<p>This is a copy of the FatFs license document that included in the source codes.</p>
+<pre>/*----------------------------------------------------------------------------/
+/  FatFs - FAT file system module  R0.07e                    (C)ChaN, 2009
+/-----------------------------------------------------------------------------/
+/ FatFs module is a generic FAT file system module for small embedded systems.
+/ This is a free software that opened for education, research and commercial
+/ developments under license policy of following trems.
+/
+/  Copyright (C) 2009, ChaN, all right reserved.
+/
+/ * The FatFs module is a free software and there is NO WARRANTY.
+/ * No restriction on use. You can use, modify and redistribute it for
+/   personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
+/ * Redistributions of source code must retain the above copyright notice.
+/
+/-----------------------------------------------------------------------------/</pre>
+<p>Therefore FatFs license is one of the BSD-style license but there is a big difference. Because FatFs is for embedded projects, the conditions for redistributions in binary form, such as embedded code, hex file and binary library, are not specified to increase its usability. The documentation of the distributions need not include about FatFs and its license document, and it may also. Of course FatFs is compatible with the projects under GNU GPL. When redistribute it with any modification, the license can also be changed to GNU GPL or BSD license.</p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/chdir.html

@@ -0,0 +1,87 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_chdir</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_chdir</h2>
+<p>The f_chdir function changes the current directory of a drive.</p>
+<pre>
+FRESULT f_chdir (
+  const XCHAR* <em>Path</em> /* Pointer to the path name */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Path</dt>
+<dd>Pointer to the null-terminated string that specifies a <a href="filename.html">directory</a> to go.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_NO_PATH</dt>
+<dd>Could not find the path.</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd>The path name is invalid.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT volume on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_chdir function changes the current directory of the logical drive. The current directory of a drive is initialized to the root directory when the drive is auto-mounted. Note that the current directory is retained in the each file system object so that it also affects other tasks that using the drive.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_RPATH == 1</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Example</h4>
+<pre>
+    // Change current direcoty of the current drive (dir1 under root dir)
+    f_chdir("/dir1");
+
+    // Change current direcoty of drive 2 (parent dir)
+    f_chdir("2:..");
+</pre>
+</div>
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="chdrive.html">f_chdrive</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/chdrive.html

@@ -0,0 +1,61 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_chdrive</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_chdrive</h2>
+<p>The f_chdrive function changes the current drive.</p>
+<pre>
+FRESULT f_chdrive (
+  BYTE <em>Drive</em> /* Logical drive number */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd>Specifies the <a href="filename.html">logical drive number</a> to be set as the current drive.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_chdrive function changes the current drive. The initial value of the current drive number is 0. Note that the current drive is retained in a static variable so that it also affects other tasks that using the file functions.</p>
+</div>
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_RPATH == 1</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="chdir.html">f_chdir</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/chmod.html

@@ -0,0 +1,97 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_chmod</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_chmod</h2>
+<p>The f_chmod function changes the attribute of a file or directory.</p>
+<pre>
+FRESULT f_chmod (
+  const XCHAR* <em>FileName</em>, /* Pointer to the file or directory */
+  BYTE <em>Attribute</em>,        /* Attribute flags */
+  BYTE <em>AttributeMask</em>     /* Attribute masks */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>FileName</dt>
+<dd>Pointer to the null-terminated string that specifies a <a href="filename.html">file or directory</a> to be changed</dd>
+<dt>Attribute</dt>
+<dd>Attribute flags to be set in one or more combination of the following flags. The specified flags are set and others are cleard.<br>
+<table class="lst">
+<tr><th>Attribute</th><th>Description</th></tr>
+<tr><td>AM_RDO</td><td>Read only</td></tr>
+<tr><td>AM_ARC</td><td>Archive</td></tr>
+<tr><td>AM_SYS</td><td>System</td></tr>
+<tr><td>AM_HID</td><td>Hidden</td></tr>
+</table>
+</dd>
+<dt>AttributeMask</dt>
+<dd>Attribute mask that specifies which attribute is changed. The specified aattributes are set or cleard.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_NO_FILE</dt>
+<dd>Could not find the file.</dd>
+<dt>FR_NO_PATH</dt>
+<dd>Could not find the path.</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd>The file name is invalid.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_WRITE_PROTECTED</dt>
+<dd>The medium is write protected.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT volume on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_chmod function changes the attribute of a file or directory.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_FS_MINIMIZE == 0</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Example</h4>
+<pre>
+    // Set read-only flag, clear archive flag and others are retained.
+    f_chmod("file.txt", AR_RDO, AR_RDO | AR_ARC);
+</pre>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/close.html

@@ -0,0 +1,68 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_close</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_close</h2>
+<p>The f_close function closes an open file.</p>
+<pre>
+FRESULT f_close (
+  FIL* <em>FileObject</em>     /* Pointer to the file object structure */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameter</h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd>Pointer to the open file object structure to be closed.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The file object has been closed successfuly.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd>The file object is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_close function closes an open file object. If any data has been written to the file, the cached information of the file is written back to the disk. After the function succeeded, the file object is no longer valid and it can be discarded. If the file object has been opened in read-only mode, it may be discarded without closing process by this function.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Always available.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="read.html">f_read</a>, <a href="write.html">f_write</a>,  <a href="sync.html">f_sync</a>, <a href="sfile.html">FIL</a>, <a href="sfatfs.html">FATFS</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/dinit.html

@@ -0,0 +1,45 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_initialize</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_initialize</h2>
+<p>The disk_initialize function initializes the disk drive.</p>
+<pre>
+DSTATUS disk_initialize (
+  BYTE <em>Drive</em>           /* Physical drive number */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameter</h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd>Specifies the physical drive number to initialize.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<p>This function returns a disk status as the result. For details of the disk status, refer to the <a href="dstat.html">disk_status</a> function.</p>
+</div>
+
+<div class="para">
+<h4>Description</h4>
+<p>The disk_initialize function initializes a physical drive. When the function succeeded, <tt>STA_NOINIT</tt> flag in the return value is cleard.</p>
+<p>This function is called from volume mount process in the FatFs module to manage the media change. <em>Application program must not call this function while FatFs module is active, or FAT structure on the volume can be collapted. To re-initialize the file system, use f_mount function.</em></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/dioctl.html

@@ -0,0 +1,68 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_ioctl</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_ioctl</h2>
+<p>The disk_ioctl function cntrols device specified features and miscellaneous functions other than disk read/write.</p>
+<pre>
+DRESULT disk_ioctl (
+  BYTE <em>Drive</em>,      /* Drive number */
+  BYTE <em>Command</em>,    /* Control command code */
+  void* <em>Buffer</em>     /* Data transfer buffer */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd>Specifies the drive number (0-9).</dd>
+<dt>Command</dt>
+<dd>Specifies the command code.</dd>
+<dt>Buffer</dt>
+<dd>Pointer to the parameter buffer depends on the command code. When it is not used, specify a NULL pointer.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Value</h4>
+<dl class="ret">
+<dt>RES_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>RES_ERROR</dt>
+<dd>Any error occured.</dd>
+<dt>RES_PARERR</dt>
+<dd>Invalid command code.</dd>
+<dt>RES_NOTRDY</dt>
+<dd>The disk drive has not been initialized.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The FatFs module uses only device independent commands described below. Any device dependent function is not used.</p>
+<table class="lst">
+<tr><th>Command</th><th>Description</th></tr>
+<tr><td>CTRL_SYNC</td><td>Make sure that the disk drive has finished pending write process. When the disk I/O module has a write back cache, flush the dirty sector immediately. This command is not required in read-only configuration.</p>
+</td></tr>
+<tr><td>GET_SECTOR_SIZE</td><td>Returns sector size of the drive into the WORD variable pointed by Buffer. This command is not required in single sector size configuration, _MAX_SS is 512.</td></tr>
+<tr><td>GET_SECTOR_COUNT</td><td>Returns total sectors on the drive into the DWORD variable pointed by Buffer. This command is used in only f_mkfs function.</td></tr>
+<tr><td>GET_BLOCK_SIZE</td><td>Returns erase block size of the memory array in unit of sector into the DWORD variable pointed by Buffer. When the erase block size is unknown or magnetic disk device, return 1. This command is used in only f_mkfs function.</td></tr>
+</table>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/dread.html

@@ -0,0 +1,58 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_read</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_read</h2>
+<p>The disk_read function reads sector(s) from the disk drive.</p>
+<pre>
+DRESULT disk_read (
+  BYTE <em>Drive</em>,          /* Physical drive number */
+  BYTE* <em>Buffer</em>,        /* Pointer to the read data buffer */
+  DWORD <em>SectorNumber</em>,  /* Start sector number */
+  BYTE <em>SectorCount</em>     /* Number of sectros to read */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd>Specifies the physical drive number.</dd>
+<dt>Buffer</dt>
+<dd>Pointer to the byte array to store the read data. The buffer size of number of bytes to be read, sector size * sector count, is required. The memory address specified by upper layer may or may not be aligned to word boundary.</dd>
+<dt>SectorNumber</dt>
+<dd>Specifies the start sector number in logical block address (LBA).</dd>
+<dt>SectorCount</dt>
+<dd>Specifies number of sectors to read. The value can be 1 to 255.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Value</h4>
+<dl class="ret">
+<dt>RES_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>RES_ERROR</dt>
+<dd>Any hard error occured during the read operation and could not recover it.</dd>
+<dt>RES_PARERR</dt>
+<dd>Invalid parameter.</dd>
+<dt>RES_NOTRDY</dt>
+<dd>The disk drive has not been initialized.</dd>
+</dl>
+</div>
+
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/dstat.html

@@ -0,0 +1,47 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_status</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_status</h2>
+<p>The disk_status function returns the current disk status.</p>
+<pre>
+DSTATUS disk_status (
+  BYTE <em>Drive</em>     /* Physical drive number */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameter</h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd>Specifies the physical drive number to be confirmed.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<p>The disk status is returned in combination of following flags.</p>
+<dl class="ret">
+<dt>STA_NOINIT</dt>
+<dd>Indicates that the disk drive has not been initialized. This flag is set on: system reset, disk removal and disk_initialize function failed, and cleared on: disk_initialize function succeeded.</dd>
+<dt>STA_NODISK</dt>
+<dd>Indicates that no medium in the drive. This is always cleared on fixed disk drive.</dd>
+<dt>STA_PROTECTED</dt>
+<dd>Indicates that the medium is write protected. This is always cleared on the drive that does not support write protect notch. Not valid when <tt>STA_NODISK</tt> is set.</dd>
+</dl>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/dwrite.html

@@ -0,0 +1,66 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_write</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_write</h2>
+<p>The disk_write writes sector(s) to the disk.</p>
+<pre>
+DRESULT disk_write (
+  BYTE <em>Drive</em>,          /* Physical drive number */
+  const BYTE* <em>Buffer</em>,  /* Pointer to the write data (may be non aligned) */
+  DWORD <em>SectorNumber</em>,  /* Sector number to write */
+  BYTE <em>SectorCount</em>     /* Number of sectors to write */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd>Specifies the physical drive number.</dd>
+<dt>Buffer</dt>
+<dd>Pointer to the byte array to be written. The memory address specified by upper layer may or may not be aligned to word boundary.</dd>
+<dt>SectorNumber</dt>
+<dd>Specifies the start sector number in logical block address (LBA).</dd>
+<dt>SectorCount</dt>
+<dd>Specifies the number of sectors to write. The value can be 1 to 255.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>RES_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>RES_ERROR</dt>
+<dd>Any hard error occured during the write operation and could not recover it.</dd>
+<dt>RES_WRPRT</dt>
+<dd>The medium is write protected.</dd>
+<dt>RES_PARERR</dt>
+<dd>Invalid parameter.</dd>
+<dt>RES_NOTRDY</dt>
+<dd>The disk drive has not been initialized.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>This function is not required in read only configuration.</p>
+</div>
+
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/fattime.html

@@ -0,0 +1,50 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - get_fattime</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>get_fattime</h2>
+<p>The get_fattime function gets current time.</p>
+<pre>
+DWORD get_fattime (void);
+</pre>
+</div>
+
+
+<div class="para">
+<h4>Return Value</h4>
+<p>Currnet time is returned with packed into a DWORD value. The bit field is as follows:</p>
+<dl class="ret">
+<dt>bit31:25</dt>
+<dd>Year from 1980 (0..127)</dd>
+<dt>bit24:21</dt>
+<dd>Month (1..12)</dd>
+<dt>bit20:16</dt>
+<dd>Day in month(1..31)</dd>
+<dt>bit15:11</dt>
+<dd>Hour (0..23)</dd>
+<dt>bit10:5</dt>
+<dd>Minute (0..59)</dd>
+<dt>bit4:0</dt>
+<dd>Second / 2 (0..29)</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The get_fattime function must return any valid time even if the system does not support a real time clock. If a zero is returned, the file will not have a valid time. This fucntion is not required in read only configuration.</p>
+</div>
+
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/filename.html

@@ -0,0 +1,68 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - Path Names</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>Format of the path names</h2>
+<p>The path name format on the FatFs module is similer to the filename specs of DOS/Windos as follows:</p>
+<pre>
+ "[<em>drive#</em>:][/]<em>directory</em>/<em>file</em>"
+</pre>
+<p>The FatFs module supports long file name (LFN) and 8.3 format file name (SFN). The LFN can be used when LFN feature is enabled <tt>(_USE_LFN &gt; 0)</tt>. The differences between DOS/Windows are directory separator and logical drive number. The sub directories are separated with a / or \. The logical drive is specified in a numeral with a colon. When the drive number is omitted, it is assumed as default drive (0 or current drive). Leading/embedded spaces in the given path name are valid as a part of the name on LFN configuration but they are recognized as end of the path name on non-LFN configuration.</p>
+<p>In default configuration <tt>(_FS_RPATH == 0)</tt>, it does not have a concept of current directory like OS oriented file system. All objects on the volume are always specified in full path name that follows from the root directory. Dot directory names are not allowed. Heading separator is ignored and it can be exist or omitted. The default drive number is fixed to 0.</p>
+<p>When relative path feature is enabled <tt>(_FS_RPATH == 1)</tt>, specified path is followed from the root directory if a heading separator is exist. If not, the path is followed from the current directory set with <a href="chdir.html">f_chdir</a> function. Dot names are also allowed for the directory name. The default drive number is the current drive number set with <a href="chdrive.html">f_chdrive</a> function.</p>
+<table class="lst2">
+<tr><td>Path name</td><td>_FS_RPATH == 0</td><td>_FS_RPATH == 1</td></tr>
+<tr class="lst3"><td>file.txt</td><td>A file in the root directory on the drive 0</td><td>A file in the current directory on the current drive</td></tr>
+<tr><td>/file.txt</td><td>A file in the root directory on the drive 0</td><td>A file in the root directory on the current drive</td></tr>
+<tr><td></td><td>The root directory on the drive 0</td><td>The current directory on the current drive</td></tr>
+<tr><td>2:</td><td>The root directory on the drive 2</td><td>The current directory on the drive 2</td></tr>
+<tr><td>2:file.txt</td><td>A file in the root directory on the drive 2</td><td>A file in the current directory on the drive 2</td></tr>
+<tr><td>2:/</td><td>The root directory on the drive 2</td><td>The root directory on the drive 2</td></tr>
+<tr><td>../file.txt</td><td>Invalid name</td><td>A file in the parent directory</td></tr>
+<tr><td>.</td><td>Invalid name</td><td>This directory</td></tr>
+<tr><td>..</td><td>Invalid name</td><td>Parent directory of the current directory</td></tr>
+<tr><td>dir1/..</td><td>Invalid name</td><td>The current directory</td></tr>
+<tr><td>/..</td><td>Invalid name</td><td>Invalid name (Cannot use dot names at the root directory)</td></tr>
+</table>
+</div>
+
+<p><br></p>
+<div class="para">
+<h2>Unicode API</h2>
+<p>The path names are input/output in either OEM code (SBCS/DBCS) or Unicode depends on the configuration options. The type of arguments that specifies the file names are defined as <tt>XCHAR</tt> which is an alias of <tt>char</tt> in default. The code set of the file name string is the OEM code set specifid by <tt>_CODE_PAGE</tt>. When <tt>_LFN_UNICODE</tt> is set to 1 under LFN configuration, the type of the <tt>XCHAR</tt> is switched to <tt>unsigned short</tt> (wide character) to support Unicode. In this case, the LFN feature is fully supported and the Unicode specific characters, such as ✝☪✡☸☭, can also be used for the path name.</p>
+</div>
+
+<p><br></p>
+<div class="para">
+<h2>Correspondence between logical and physical drives</h2>
+<p>The FatFs module has work areas that called <em>file system object</em> for each volume (logical drive). In default, the logical drive is bound to the physical drive that has same drive number, and the first partition is mounted. When <tt>_MULTI_PARTITION == 1</tt> is specified in configuration option, each individual logical drive can be bound to any physical drive/partition. In this case, a drive number resolution table must be defined as follows:</p>
+<pre>
+Example: Logical drive 0-2 are assigned to three pri-partitions on the physical drive 0 (fixed disk)
+         Logical drive 3 is assigned to physical drive 1 (removable disk)
+
+const PARTITION Drives[] = {
+    {0, 0},     /* Logical drive 0 ==> Physical drive 0, 1st partition */
+    {0, 1},     /* Logical drive 1 ==> Physical drive 0, 2nd partition */
+    {0, 2},     /* Logical drive 2 ==> Physical drive 0, 3rd partition */
+    {1, 0}      /* Logical drive 3 ==> Physical drive 1 */
+};
+</pre>
+<p>There are some considerations when use <tt>_MULTI_PARTITION</tt> configuration.</p>
+<ul>
+<li>Only pri-partition (0-3) can be mounted.</li>
+<li>When the physical drive has no partition table (SFD format), the partition number is ignored.</li>
+<li>The physical drive that has two or more logical drives must be a fixed drive.</li>
+</ul>
+</div>
+
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/forward.html

@@ -0,0 +1,142 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_forward</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_forward</h2>
+<p>The f_forward function reads the file data and forward it to the data streaming device.</p>
+<pre>
+FRESULT f_forward (
+  FIL* <em>FileObject</em>,                 /* File object */
+  UINT (*<em>Func</em>)(const BYTE*,UINT),  /* Data streaming function */
+  UINT <em>ByteToFwd</em>,                  /* Number of bytes to forward */
+  UINT* <em>ByteFwd</em>                    /* Number of bytes forwarded */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd>Pointer to the open file object.</dd>
+<dt>Func</dt>
+<dd>Pointer to the user-defined data streaming function. For details, refer to the sample code.</dd>
+<dt>ByteToFwd</dt>
+<dd>Number of bytes to forward in range of UINT.</dd>
+<dt>ByteFwd</dt>
+<dd>Pointer to the UINT variable to return number of bytes forwarded.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_DENIED</dt>
+<dd>The function denied due to the file has been opened in non-read mode.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd>The file object is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_forward function reads the data from the file and forward it to the outgoing stream without data buffer. This is suitable for small memory system because it does not require any data buffer at application module. The file pointer of the file object increases in number of bytes forwarded. In case of <tt>*ByteFwd &lt; ByteToFwd</tt> without error, it means the requested bytes could not be transferred due to end of file or stream goes busy during data transfer.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_USE_FORWARD == 1</tt> and <tt>_FS_TINY == 1</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Example (Audio playback)</h4>
+<pre>
+/*-----------------------------------------------------------------------*/
+/* Sample code of data transfer function to be called from f_forward     */
+/*-----------------------------------------------------------------------*/
+
+UINT out_stream (   /* Returns number of bytes sent or stream status */
+    const BYTE *p,  /* Pointer to the data block to be sent */
+    UINT btf        /* &gt;0: Transfer call (Number of bytes to be sent). 0: Sense call */
+)
+{
+    UINT cnt = 0;
+
+
+    if (btf == 0) {     /* Sense call */
+        /* Return stream status (0: Busy, 1: Ready) */
+        /* When once it returned ready to sense call, it must accept a byte at least */
+        /* at subsequent transfer call, or f_forward will fail with FR_INT_ERROR. */
+        if (FIFO_READY) cnt = 1;
+    }
+    else {              /* Transfer call */
+        do {    /* Repeat while there is any data to be sent and the stream is ready */
+            FIFO_PORT = *p++;
+            cnt++;
+        } while (cnt &lt; btf &amp;&amp; FIFO_READY);
+    }
+
+    return cnt;
+}
+
+
+/*-----------------------------------------------------------------------*/
+/* Sample code using f_forward function                                  */
+/*-----------------------------------------------------------------------*/
+
+FRESULT play_file (
+    char *fn        /* Pointer to the audio file name to be played */
+)
+{
+    FRESULT rc;
+    FIL fil;
+    UINT dmy;
+
+    /* Open the audio file in read only mode */
+    rc = f_open(&amp;fil, fn, FA_READ);
+
+    /* Repeat until the file pointer reaches end of the file */
+    while (rc == FR_OK &amp;&amp; fil.fptr &lt; fil.fsize) {
+
+        /* any other processes... */
+
+        /* Fill output stream periodicaly or on-demand */
+        rc = f_forward(&amp;fil, out_stream, 1000, &amp;dmy);
+    }
+
+    /* The read-only file object may be discarded without close */
+    return rc;
+}
+</pre>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="gets.html">fgets</a>, <a href="write.html">f_write</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/getfree.html

@@ -0,0 +1,101 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_getfree</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_getfree</h2>
+<p>The f_getfree function gets number of the free clusters.</p>
+<pre>
+FRESULT f_getfree (
+  const XCHAR* <em>Path</em>,        /* Root directory of the drive */
+  DWORD* <em>Clusters</em>,          /* Pointer to the variable to store number of free clusters */
+  FATFS** <em>FileSystemObject</em>  /* Pointer to pointer to file system object */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Path</dt>
+<dd>Pinter to the null-terminated string that specifies the <a href="filename.html">root directory</a> of the logical drive.</dd>
+<dt>Clusters</dt>
+<dd>Pointer to the DWORD variable to store number of free clusters.</dd>
+<dt>FileSystemObject</dt>
+<dd>Pointer to pointer that to store a pointer to the corresponding file system object.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded. The <tt><em>*Clusters</em></tt> has number of free clusters and <tt><em>*FileSystemObject</em></tt> points the file system object.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT partition on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Descriptions</h4>
+<p>The f_getfree function gets number of free clusters on the drive. The member <tt>csize</tt> in the file system object is refrecting number of sectors per cluster, so that the free space in unit of sector can be calcurated with this. When FSInfo structure on FAT32 volume is not in sync, this function can return an incorrect free cluster count.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_FS_MINIMIZE == 0</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Example</h4>
+<pre>
+    FATFS *fs;
+    DWORD fre_clust, fre_sect, tot_sect;
+
+
+    /* Get drive information and free clusters */
+    res = f_getfree("/", &amp;fre_clust, &amp;fs);
+    if (res) die(res);
+
+    /* Get total sectors and free sectors */
+    tot_sect = (fs->max_clust - 2) * fs->csize;
+    fre_sect = fre_clust * fs->csize;
+
+    /* Print free space in unit of KB (assuming 512B/sector) */
+    printf("%lu KB total drive space.\n"
+           "%lu KB available.\n",
+           fre_sect / 2, tot_sect / 2);
+</pre>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="sfatfs.html">FATFS</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/gets.html

@@ -0,0 +1,63 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_gets</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_gets</h2>
+<p>The f_gets reads a string from the file.</p>
+<pre>
+char* f_gets (
+  char* <em>Str</em>,        /* Read buffer */
+  int <em>Size</em>,         /* Size of the read buffer */
+  FIL* <em>FileObject</em>   /* File object */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Str</dt>
+<dd>Pointer to read buffer to store the read string.</dd>
+<dt>Size</dt>
+<dd>Size of the read buffer.</dd>
+<dt>FileObject</dt>
+<dd>Pointer to the open file object structure.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<p>When the function succeeded, <tt>Str</tt> will be returuned.</p>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_gets() is a wrapper function of <a href="read.html">f_read()</a>. The read operation continues until a <tt>'\n'</tt> is stored, reached end of file or buffer is filled with Size - 1 characters. The read string is terminated with a <tt>'\0'</tt>. When the file has reached end of the file or any error occured during read operation, f_gets() returns a <tt>NULL</tt>. The EOF and error status can be examined with <tt>f_eof()</tt> and <tt>f_error()</tt> macro.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_USE_STRFUNC</tt> is 1 or 2. When it is set to 2, <tt>'\r'</tt>s contained in the file are stripped out.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="read.html">f_read</a>, <a href="putc.html">f_putc</a>, <a href="puts.html">f_puts</a>, <a href="printf.html">f_printf</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/lseek.html

@@ -0,0 +1,111 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_lseek</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_lseek</h2>
+<p>The f_lseek function moves the file read/write pointer of an open file object. It can also be used to increase the file size (cluster pre-allocation).</p>
+
+<pre>
+FRESULT f_lseek (
+  FIL* <em>FileObject</em>,   /* Pointer to the file object structure */
+  DWORD <em>Offset</em>       /* File offset in unit of byte */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd>Pointer to the open file object.</dd>
+<dt>Offset</dt>
+<dd>Number of bytes where from start of the file</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd>The file object is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_lseek function moves the file R/W pointer of an open file. The offset can be specified in only origin from top of the file. When an offset above the file size is specified in write mode, the file size is increased and the data in the expanded area is undefined. This is suitable to create a large file quickly, for fast write operation. After the f_lseek function succeeded, member fptr in the file object should be checked in order to make sure the R/W pointer has been moved correctry. In case of fptr is not the expected value, either of followings has been occured.</p>
+<ul>
+<li>End of file. The specified Offset was clipped at the file size because the file has been opened in read-only mode.</li>
+<li>Disk full. There is insufficient free space on the volume to expand the file size.</li>
+</ul>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_MINIMIZE &lt;= 2</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Example</h4>
+<pre>
+    /* Move to offset of 5000 from top of the file */
+    res = f_lseek(file, 5000);
+
+    /* Move to end of the file to append data */
+    res = f_lseek(file, file-&gt;fsize);
+
+    /* Forward 3000 bytes */
+    res = f_lseek(file, file-&gt;fptr + 3000);
+
+    /* Rewind 2000 bytes (take care on overflow) */
+    res = f_lseek(file, file-&gt;fptr - 2000);
+</pre>
+<pre>
+    /* Cluster pre-allocation (to prevent buffer overrun on streaming write) */
+
+    res = f_open(file, recfile, FA_CREATE_NEW | FA_WRITE); /* Create a file */
+
+    res = f_lseek(file, PRE_SIZE);         /* Pre-allocate clusters */
+    if (res || file-&gt;fptr != PRE_SIZE) ... /* Check if the file size has been increased correctly */
+
+    res = f_lseek(file, DATA_START);       /* Record data stream without cluster allocation delay */
+    ...
+
+    res = f_truncate(file);                /* Truncate unused area */
+    res = f_lseek(file, 0);                /* Put file header */
+    ...
+
+    res = f_close(file);
+</pre>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="truncate.html">f_truncate</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/mkdir.html

@@ -0,0 +1,89 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_mkdir</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_mkdir</h2>
+<p>The f_mkdir function creates a new directory.</p>
+<pre>
+FRESULT f_mkdir (
+  const XCHAR* <em>DirName</em> /* Pointer to the directory name */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameter</h4>
+<dl class="par">
+<dt>DirName</dt>
+<dd>Pointer to the null-terminated string that specifies the <a href="filename.html">directory name</a> to create. </dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Value</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_NO_PATH</dt>
+<dd>Could not find the path.</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd>The path name is invalid.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_DENIED</dt>
+<dd>The directory cannot be created due to directory table or disk is full.</dd>
+<dt>FR_EXIST</dt>
+<dd>A file or directory that has same name is already existing.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_WRITE_PROTECTED</dt>
+<dd>The medium is write protected.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT volume on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_mkdir function creates a new directory.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_FS_MINIMIZE == 0</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Example</h4>
+<pre>
+    res = f_mkdir("sub1");
+    if (res) die(res);
+    res = f_mkdir("sub1/sub2");
+    if (res) die(res);
+    res = f_mkdir("sub1/sub2/sub3");
+    if (res) die(res);
+</pre>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/mkfs.html

@@ -0,0 +1,78 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_mkfs</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_mkfs</h2>
+<p>The f_mkfs fucntion creates a file system on the drive.</p>
+<pre>
+FRESULT f_mkfs (
+  BYTE  <em>Drive</em>,            /* Logical drive number */
+  BYTE  <em>PartitioningRule</em>, /* Partitioning rule */
+  WORD  <em>AllocSize</em>         /* Size of the allocation unit */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd>Logical drive number (0-9) to be formatted.</dd>
+<dt>PartitioningRule</dt>
+<dd>When 0 is given, a partition table is created into the first sector on the drive and then the file system is created on the partition. This is called FDISK format and used for harddisk and memory card. When 1 is given, the file system starts from the first sector without partition table. This is often called super floppy disk (SFD) format and used for floppy disk and removable disk.</dd>
+<dt>AllocSize</dt>
+<dd>Specifies allocation unit size in number of bytes per cluster. The value must be 0 or power of 2 in range of from 512 to 32768. When 0 is specified, the cluster size is determined depends on the volume size. FAT64 (64KB/cluster on FAT16) cannot be created by this function.</dd>
+</dl>
+</div>
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The drive cannot work due to any reason.</dd>
+<dt>FR_WRITE_PROTECTED</dt>
+<dd>The drive is write protected.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_MKFS_ABORTED</dt>
+<dd>The function aborted before start in format due to a reason as follows.
+<ul>
+<li>The disk size is too small.</li>
+<li>Invalid parameter was given to any parameter.</li>
+<li>Not allowable cluster size for this drive. This can occure when number of clusters becomes around 0xFF7 and 0xFFF7.</li>
+</ul>
+</dd>
+</dl>
+</div>
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_mkfs function creates a FAT file system on the drive. There are two partitioning rules, FDISK and SFD, for removable media. It can be selected with an argument. The FDISK format is recommended for the most case. This function currently <em>does not support multiple partition</em>, so that existing partitions on the physical dirve will be deleted and re-created a new partition occupies entire disk space.</p>
+<p>The FAT sub-type, FAT12/FAT16/FAT32, is determined by number of clusters on the drive and nothing else, according to the FAT specification issued by Microsoft. Thus which FAT sub-type is selected, is depends on the volume size and the specified cluster size. The cluster size affects performance of the file system and large cluster increases the performance.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READOLNY == 0</tt> and <tt>_USE_MKFS == 1</tt>.</p>
+</div>
+
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/mount.html

@@ -0,0 +1,65 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_mount</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_mount</h2>
+<p>The f_mount fucntion registers/unregisters a work area to the FatFs module.</p>
+<pre>
+FRESULT f_mount (
+  BYTE  <em>Drive</em>,              /* Logical drive number */
+  FATFS*  <em>FileSystemObject</em>  /* Pointer to the work area */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd>Logical drive number (0-9) to register/unregister the work area.</dd>
+<dt>FileSystemObject</dt>
+<dd>Pointer to the work area (file system object) to be registered.</dd>
+</dl>
+</div>
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_mount function registers/unregisters a work area to the FatFs module. The work area must be given to the each volume with this function prior to use any other file function. To unregister a work area, specify a NULL to the <em>FileSystemObject</em>, and then the work area can be discarded.</p>
+<p>This function only initializes the given work area and registers its address to the internal table, any access to the disk I/O layer does not occure. The volume mount process is performed on first file access after f_mount function or media change.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Always available.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="sfatfs.html">FATFS</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/open.html

@@ -0,0 +1,148 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_open</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_open</h2>
+<p>The f_open function creates a <em>file object</em> to be used to access the file.</p>
+<pre>
+FRESULT f_open (
+  FIL* <em>FileObject</em>,       /* Pointer to the blank file object structure */
+  const XCHAR* <em>FileName</em>, /* Pointer to the file neme */
+  BYTE <em>ModeFlags</em>         /* Mode flags */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd>Pointer to the file object structure to be created.</dd>
+<dt>FileName</dt>
+<dd>Pointer to a null-terminated string that specifies the <a href="filename.html">file name</a> to create or open.</dd>
+<dt>ModeFlags</dt>
+<dd>Specifies the type of access and open method for the file. It is specified by a combination of following flags.<br>
+<table class="lst">
+<tr><th>Value</th><th>Description</th></tr>
+<tr><td>FA_READ</td><td>Specifies read access to the object. Data can be read from the file.<br>Combine with FA_WRITE for read-write access.</td></tr>
+<tr><td>FA_WRITE</td><td>Specifies write access to the object. Data can be written to the file.<br>Combine with FA_READ for read-write access.</td></tr>
+<tr><td>FA_OPEN_EXISTING</td><td>Opens the file. The function fails if the file is not existing. (Default)</td></tr>
+<tr><td>FA_OPEN_ALWAYS</td><td>Opens the file, if it is existing. If not, a new file is created.</td></tr>
+<tr><td>FA_CREATE_NEW</td><td>Creates a new file. The function fails if the file is already existing.</td></tr>
+<tr><td>FA_CREATE_ALWAYS</td><td>Creates a new file. If the file is existing, it is truncated and overwritten.</td></tr>
+</table>
+</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded and the file object is valid.</dd>
+<dt>FR_NO_FILE</dt>
+<dd>Could not find the file.</dd>
+<dt>FR_NO_PATH</dt>
+<dd>Could not find the path.</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd>The file name is invalid.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_EXIST</dt>
+<dd>The file is already existing.</dd>
+<dt>FR_DENIED</dt>
+<dd>The required access was denied due to one of the following reasons:
+<ul><li>Write mode open of a read-only file.</li>
+<li>File cannot be created due to a read-only file or same name directory is existing.</li>
+<li>File cannot be created due to the directory table or disk is full.</li></ul></dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_WRITE_PROTECTED</dt>
+<dd>Write mode open or creation under the medium is write protected.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT volume on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>A file object is created when the function succeeded. The file object is used for subsequent read/write functions to refer to the file. When close an open file object, use <a href="close.html">f_close</a> function. If the modified file is not closed, the file may be collapsed.</p>
+<p>Before using any file function, a work area (file system object) must be given to the logical drive with <a href="mount.html">f_mount</a> function. All file functions can work after this procedure.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Always available. The mode flags, <tt>FA_WRITE, FA_CREATE_ALWAYS, FA_CREATE_NEW, FA_OPEN_ALWAYS</tt>, are not available when <tt>_FS_READONLY == 1</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Example (File Copy)</h4>
+<pre>
+void main (void)
+{
+    FATFS fs[2];         /* Work area (file system object) for logical drives */
+    FIL fsrc, fdst;      /* file objects */
+    BYTE buffer[4096];   /* file copy buffer */
+    FRESULT res;         /* FatFs function common result code */
+    UINT br, bw;         /* File R/W count */
+
+
+    /* Register work area for logical drives */
+    f_mount(0, &amp;fs[0]);
+    f_mount(1, &amp;fs[1]);
+
+    /* Open source file on the drive 1 */
+    res = f_open(&amp;fsrc, "1:srcfile.dat", FA_OPEN_EXISTING | FA_READ);
+    if (res) die(res);
+
+    /* Create destination file on the drive 0 */
+    res = f_open(&amp;fdst, "0:dstfile.dat", FA_CREATE_ALWAYS | FA_WRITE);
+    if (res) die(res);
+
+    /* Copy source to destination */
+    for (;;) {
+        res = f_read(&amp;fsrc, buffer, sizeof(buffer), &amp;br);
+        if (res || br == 0) break;   /* error or eof */
+        res = f_write(&amp;fdst, buffer, br, &amp;bw);
+        if (res || bw &lt; br) break;   /* error or disk full */
+    }
+
+    /* Close open files */
+    f_close(&amp;fsrc);
+    f_close(&amp;fdst);
+
+    /* Unregister work area prior to discard it */
+    f_mount(0, NULL);
+    f_mount(1, NULL);
+}
+</pre>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="read.html">f_read</a>, <a href="write.html">f_write</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a>, <a href="sfatfs.html">FATFS</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/opendir.html

@@ -0,0 +1,79 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_opendir</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_opendir</h2>
+<p>The f_opendir function opens a directory.</p>
+<pre>
+FRESULT f_opendir (
+  DIR* <em>DirObject</em>,       /* Pointer to the blank directory object structure */
+  const XCHAR* <em>DirName</em>  /* Pointer to the directory name */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>DirObject</dt>
+<dd>Pointer to the blank directory object to be created.</dd>
+<dt>DirName</dt>
+<dd>Pinter to the null-terminated string that specifies the <a href="filename.html">directory name</a> to be opened.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded and the directory object is created. It is used for subsequent calls to read the directory entries.</dd>
+<dt>FR_NO_PATH</dt>
+<dd>Could not find the path.</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd>The path name is invalid.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT volume on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_opendir function opens an exsisting directory and creates the directory object for subsequent calls. The directory object structure can be discarded at any time without any procedure.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_MINIMIZE &lt;= 1</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="readdir.html">f_readdir</a>, <a href="sdir.html">DIR</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/printf.html

@@ -0,0 +1,82 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_printf</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_printf</h2>
+<p>The f_printf function writes formatted string to the file.</p>
+<pre>
+int f_printf (
+  FIL* <em>FileObject</em>,     /* File object */
+  const char* <em>Foramt</em>,  /* Format stirng */
+  ...
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd>Pointer to the open file object structure.</dd>
+<dt>Format</dt>
+<dd>Pointer to the null-terminated format string.</dd>
+<dt>...</dt>
+<dd>Optional arguments.</dd>
+
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<p>When the function succeeded, number of characters written is returned. When the function failed due to disk full or any error, an <tt>EOF</tt> will be returned.</p>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_printf() is a wrapper function of <a href="putc.html">f_putc()</a> and <a href="puts.html">f_puts()</a>. The format control directive is a sub-set of standard library shown as follos:</p>
+<ul>
+<li>Type: <tt>c s d u X</tt></li>
+<li>Size: <tt>l</tt></li>
+<li>Flag: <tt>0</tt></li>
+</ul>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_USE_STRFUNC</tt> is 1 or 2. When it is set to 2, <tt>'\n'</tt>s contained in the output are converted to <tt>"\r\n"</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Example</h4>
+<pre>
+    f_printf(&amp;fil, "%6d", -200);         /* "  -200" */
+    f_printf(&amp;fil, "%02u", 5);           /* "05" */
+    f_printf(&amp;fil, "%ld", 12345678L);    /* "12345678" */
+    f_printf(&amp;fil, "%08lX", 1194684UL);  /* "00123ABC" */
+    f_printf(&amp;fil, "%s", "String");      /* "String" */
+    f_printf(&amp;fil, "%c", 'a');           /* "a" */
+</pre>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="putc.html">f_putc</a>, <a href="puts.html">f_puts</a>, <a href="gets.html">f_gets</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/putc.html

@@ -0,0 +1,60 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_putc</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_putc</h2>
+<p>The f_putc funciton puts a character to the file.</p>
+<pre>
+int f_putc (
+  int <em>Chr</em>,          /* A character to put */
+  FIL* <em>FileObject</em>   /* File object */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Chr</dt>
+<dd>A character to be put.</dd>
+<dt>FileObject</dt>
+<dd>Pointer to the open file object structuer.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<p>When the character was written successfuly, the function returns the character. When the function failed due to disk full or any error, an <tt>EOF</tt> will be returned.</p>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_putc() is a wrapper function of <a href="write.html">f_write()</a>.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_USE_STRFUNC</tt> is 1 or 2. When it is set to 2, a <tt>'\n'</tt> is converted to <tt>"\r\n"</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="puts.html">f_puts</a>, <a href="printf.html">f_printf</a>, <a href="gets.html">f_gets</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/puts.html

@@ -0,0 +1,60 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_puts</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_puts</h2>
+<p>The f_puts function writes a string to the file.</p>
+<pre>
+int f_puts (
+  const char* <em>Str</em>,  /* String */
+  FIL* <em>FileObject</em>   /* File object */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>Str</dt>
+<dd>Pointer to the null terminated string to be written. The null character will not be written.</dd>
+<dt>FileObject</dt>
+<dd>Pointer to the open file object structure.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Value</h4>
+<p>When the function succeeded, number of characters written that is not minus value is returned. When the function failed due to disk full or any error, an <tt>EOF</tt> will be returned.</p>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_puts() is a wrapper function of <a href="putc.html">f_putc()</a>.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_USE_STRFUNC</tt> is 1 or 2. When it is set to 2, <tt>'\n'</tt>s contained in the string are converted to <tt>"\r\n"</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="putc.html">f_putc</a>, <a href="printf.html">f_printf</a>, <a href="gets.html">f_gets</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/read.html

@@ -0,0 +1,79 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_read</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_read</h2>
+<p>The f_read function reads data from a file.</p>
+<pre>
+FRESULT f_read (
+  FIL* <em>FileObject</em>,    /* Pointer to the file object structure */
+  void* <em>Buffer</em>,       /* Pointer to the buffer to store read data */
+  UINT <em>ByteToRead</em>,    /* Number of bytes to read */
+  UINT* <em>ByteRead</em>      /* Pointer to the variable to return number of bytes read */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd>Pointer to the open file object.</dd>
+<dt>Buffer</dt>
+<dd>Pointer to the buffer to store read data</dd>
+<dt>ByteToRead</dt>
+<dd>Number of bytes to read in range of UINT.</dd>
+<dt>ByteRead</dt>
+<dd>Pointer to the UINT variable to return number of bytes read. The value is always valid after the function call regardless of the result.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_DENIED</dt>
+<dd>The function denied due to the file has been opened in non-read mode.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd>The file object is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The file pointer of the file object increases in number of bytes read. After the function succeeded, <tt>*ByteRead</tt> should be checked to detect the end of file. In case of <tt>*ByteRead &lt; ByteToRead</tt>, it means the R/W pointer reached end of the file during read operation.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Always available.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="gets.html">fgets</a>, <a href="write.html">f_write</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/readdir.html

@@ -0,0 +1,119 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_readdir</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_readdir</h2>
+<p>The f_readdir function reads directory entries.</p>
+<pre>
+FRESULT f_readdir (
+  DIR* <em>DirObject</em>,    /* Pointer to the open directory object */
+  FILINFO* <em>FileInfo</em>  /* Pointer to the file information structure */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>DirObject</dt>
+<dd>Pointer to the open directory object.</dd>
+<dt>FileInfo</dt>
+<dd>Pointer to the file information structure to store the read item.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd>The directory object is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_readdir function reads directory entries in sequence. All items in the directory can be read by calling f_readdir function repeatedly. When all directory entries have been read and no item to read, the function returns a null string into <tt>f_name[]</tt> member without any error. When a null pointer is given to the <tt>FileInfo</tt>, the read index of the directory object will be rewinded.</p>
+<p>When LFN feature is enabled, <tt>lfname</tt> and <tt>lfsize</tt> in the file information structure must be initialized with valid value prior to use the f_readdir function. The <tt>lfname</tt> is a pointer to the string buffer to return the long file name. The <tt>lfsize</tt> is the size of the string buffer in unit of character. If either the size of read buffer or LFN working buffer is insufficient for the LFN or the object has no LFN, a null string will be returned to the LFN read buffer. If the LFN contains any charactrer that cannot be converted to OEM code, a null string will be returned but this is not the case on Unicode API configuration. When <tt>lfname</tt> is a NULL, nothing of the LFN is returned. When the object has no LFN, any small capitals can be contained in the SFN.</p>
+<p>When relative path feature is enabled <tt>(_FS_RPATH == 1)</tt>, "." and ".." entries are not filtered out and it will appear in the read entries.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_MINIMIZE &lt;= 1</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Sample Code</h4>
+<pre>
+FRESULT scan_files (char* path)
+{
+    FRESULT res;
+    FILINFO fno;
+    DIR dir;
+    int i;
+    char *fn;
+#if _USE_LFN
+    static char lfn[_MAX_LFN * (_DF1S ? 2 : 1) + 1];
+    fno.lfname = lfn;
+    fno.lfsize = sizeof(lfn);
+#endif
+
+
+    res = f_opendir(&amp;dir, path);
+    if (res == FR_OK) {
+        i = strlen(path);
+        for (;;) {
+            res = f_readdir(&amp;dir, &amp;fno);
+            if (res != FR_OK || fno.fname[0] == 0) break;
+            if (fno.fname[0] == '.') continue;
+#if _USE_LFN
+            fn = *fno.lfname ? fno.lfname : fno.fname;
+#else
+            fn = fno.fname;
+#endif
+            if (fno.fattrib &amp; AM_DIR) {
+                sprintf(&amp;path[i], "/%s", fn);
+                res = scan_files(path);
+                if (res != FR_OK) break;
+                path[i] = 0;
+            } else {
+                printf("%s/%s\n", path, fn);
+            }
+        }
+    }
+
+    return res;
+}
+</pre>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="opendir.html">f_opendir</a>, <a href="stat.html">f_stat</a>, <a href="sfileinfo.html">FILINFO</a>, <a href="sdir.html">DIR</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/rename.html

@@ -0,0 +1,93 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_rename</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_rename</h2>
+<p>Renames an object.</p>
+<pre>
+FRESULT f_rename (
+  const XCHAR* <em>OldName</em>, /* Pointer to old object name */
+  const XCHAR* <em>NewName</em>  /* Pointer to new object name */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>OldName</dt>
+<dd>Pointer to a null-terminated string specifies the old <a href="filename.html">object name</a> to be renamed.</dd>
+<dt>NewName</dt>
+<dd>Pointer to a null-terminated string specifies the new object name without drive number.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_NO_FILE</dt>
+<dd>Could not find the old name.</dd>
+<dt>FR_NO_PATH</dt>
+<dd>Could not find the path.</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd>The file name is invalid.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_EXIST</dt>
+<dd>The new name is colliding with an existing name.</dd>
+<dt>FR_DENIED</dt>
+<dd>The new name could not be created due to any reason.</dd>
+<dt>FR_WRITE_PROTECTED</dt>
+<dd>The medium is write protected.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT volume on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>Renames an object and can also move it to other directory. The logical drive number is determined by old name, new name must not contain a logical drive number. <em>Do not rename open objects</em>.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_FS_MINIMIZE == 0</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>Example</h4>
+<pre>
+    /* Rename an object */
+    f_rename("oldname.txt", "newname.txt");
+
+    /* Rename and move an object to other directory */
+    f_rename("oldname.txt", "dir1/newname.txt");
+</pre>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/sdir.html

@@ -0,0 +1,36 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - DIR</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>DIR</h2>
+<p>The <tt>DIR</tt> structure is used for the work area to read a directory by f_oepndir, f_readdir function. There is no member that can be changed by application.</p>
+<pre>
+typedef struct _DIR_ {
+    FATFS*  fs;         /* Pointer to the owner file system object */
+    WORD    id;         /* Owner file system mount ID */
+    WORD    index;      /* Current read/write index number */
+    DWORD   sclust;     /* Table start cluster (0:Static table) */
+    DWORD   clust;      /* Current cluster */
+    DWORD   sect;       /* Current sector */
+    BYTE*   dir;        /* Pointer to the current SFN entry in the win[] */
+    BYTE*   fn;         /* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */
+#if _USE_LFN
+    WCHAR*  lfn;        /* Pointer to the LFN working buffer */
+    WORD    lfn_idx;    /* Last matched LFN index (0xFFFF:No LFN) */
+#endif
+} DIR;
+</pre>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/sfatfs.html

@@ -0,0 +1,53 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - FATFS</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>FATFS</h2>
+<p>The <tt>FATFS</tt> structure holds dynamic work area of individual logical drives. It is given by application program and registerd/unregisterd to the FatFs module with f_mount function. Following members are in standard configuration. There is no member that can be changed from the application program.</p>
+<pre>
+typedef struct _FATFS_ {
+    BYTE    fs_type;    /* FAT sub type */
+    BYTE    drive;      /* Physical drive number */
+    BYTE    csize;      /* Number of sectors per cluster */
+    BYTE    n_fats;     /* Number of FAT copies */
+    BYTE    wflag;      /* win[] dirty flag (1:must be written back) */
+    BYTE    fsi_flag;   /* fsinfo dirty flag (1:must be written back) */
+    WORD    id;         /* File system mount ID */
+    WORD    n_rootdir;  /* Number of root directory entries (0 on FAT32) */
+#if _FS_REENTRANT
+    _SYNC_t sobj;       /* Identifier of sync object */
+#endif
+#if _MAX_SS != 512
+    WORD    s_size;     /* Sector size */
+#endif
+#if !_FS_READONLY
+    DWORD   last_clust; /* Last allocated cluster */
+    DWORD   free_clust; /* Number of free clusters */
+    DWORD   fsi_sector; /* fsinfo sector */
+#endif
+#if _FS_RPATH
+    DWORD   cdir;       /* Current directory (0:root)*/
+#endif
+    DWORD   sects_fat;  /* Sectors per fat */
+    DWORD   max_clust;  /* Maximum cluster# + 1. Number of clusters is max_clust - 2 */
+    DWORD   fatbase;    /* FAT start sector */
+    DWORD   dirbase;    /* Root directory start sector (Cluster# on FAT32) */
+    DWORD   database;   /* Data start sector */
+    DWORD   winsect;    /* Current sector appearing in the win[] */
+    BYTE    win[_MAX_SS];/* Disk access window for Directory/FAT */
+} FATFS;
+</pre>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/sfile.html

@@ -0,0 +1,42 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - FIL</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>FIL</h2>
+<p>The FIL structure (file object) holds state of an open file. It is initialzed by f_open function and discarded by f_close function. There is no member that can be changed by the application program.</p>
+
+<pre>
+typedef struct _FIL_ {
+    FATFS*  fs;         /* Pointer to the owner file system object */
+    WORD    id;         /* Owner file system mount ID */
+    BYTE    flag;       /* File status flags */
+    BYTE    csect;      /* Sector address in the cluster */
+    DWORD   fptr;       /* File R/W pointer */
+    DWORD   fsize;      /* File size */
+    DWORD   org_clust;  /* File start cluster */
+    DWORD   curr_clust; /* Current cluster */
+    DWORD   dsect;      /* Current data sector */
+#if !_FS_READONLY
+    DWORD   dir_sect;   /* Sector containing the directory entry */
+    BYTE*   dir_ptr;    /* Ponter to the directory entry in the window */
+#endif
+#if !_FS_TINY
+    BYTE    buf[_MAX_SS];/* File R/W buffer */
+#endif
+} FIL;
+</pre>
+
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/sfileinfo.html

@@ -0,0 +1,69 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - FILINFO</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>FILINFO</h2>
+<p>The <tt>FILINFO</tt> structure holds a file information returned by f_stat and f_readdir function.</p>
+<pre>
+typedef struct _FILINFO_ {
+    DWORD fsize;      /* File size */
+    WORD  fdate;      /* Last modified date */
+    WORD  ftime;      /* Last modified time */
+    BYTE  fattrib;    /* Attribute */
+    char  fname[13];  /* Short file name (8.3 format) */
+#if _USE_LFN
+    XCHAR* lfname;    /* Pointer to the LFN buffer */
+    int   lfsize;     /* Size of LFN buffer [characters] */
+#endif
+} FILINFO;
+</pre>
+</div>
+
+<h4>Members</h4>
+<dl>
+<dt>fsize</dt>
+<dd>Indicates size of the file in unit of byte. This is always zero when it is a directory.</dd>
+<dt>fdate</dt>
+<dd>Indicates the date that the file was modified or the directory was created.<br>
+<dl>
+<dt>bit15:9</dt>
+<dd>Year origin from 1980 (0..127)</dd>
+<dt>bit8:5</dt>
+<dd>Month (1..12)</dd>
+<dt>bit4:0</dt>
+<dd>Day (1..31)</dd>
+</dl>
+</dd>
+<dt>ftime</dt>
+<dd>Indicates the time that the file was modified or the directory was created.<br>
+<dl>
+<dt>bit15:11</dt>
+<dd>Hour (0..23)</dd>
+<dt>bit10:5</dt>
+<dd>Minute (0..59)</dd>
+<dt>bit4:0</dt>
+<dd>Second / 2 (0..29)</dd>
+</dl>
+</dd>
+<dt>fattrib</dt>
+<dd>Indicates the file/directory attribute in combination of <tt>AM_DIR</tt>, <tt>AM_RDO</tt>, <tt>AM_HID</tt>, <tt>AM_SYS</tt> and <tt>AM_ARC</tt>.</dd>
+<dt>fname[]</dt>
+<dd>Indicates the file/directory name in 8.3 format null-terminated string. It is always returnd with upper case on non-LFN configuration but it can be returned with lower case on LFN configuration.</dd>
+<dt>lfname</dt>
+<dd>Pointer to the LFN buffer to store the read LFN. This member must be initialized by application prior to use this structure. Not available on non-LFN configuration.</dd>
+<dt>lfsize</dt>
+<dd>Size of the LFN buffer in unit of chars. This member must be initialized by application prior to use this structure. Not available on non-LFN configuration.</dd>
+</dl>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/stat.html

@@ -0,0 +1,75 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_stat</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_stat</h2>
+<p>The f_stat gets the file status.</p>
+<pre>
+FRESULT f_stat (
+  const XCHAR* <em>FileName</em>,  /* Pointer to the file or directory name */
+  FILINFO* <em>FileInfo</em>       /* Pointer to the FILINFO structure */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>FileName</dt>
+<dd>Pointer to the null-terminated string that specifies the <a href="filename.html">file or directory</a> to get its information.</dd>
+<dt>FileInfo</dt>
+<dd>Pointer to the blank <tt>FILINFO</tt> structure to store the information.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_NO_FILE</dt>
+<dd>Could not find the file or directory.</dd>
+<dt>FR_NO_PATH</dt>
+<dd>Could not find the path.</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd>The file name is invalid.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT volume on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_stat gets the information of a file or directory. For details of the infomation, refer to the <tt>FILINFO</tt> structure and <a href="readdir.html">f_readdir</a> function. This function is not supported in minimization level of &gt;= 1.</p>
+</div>
+
+
+<div class="para">
+<h4>References</h4>
+<p><tt><a href="opendir.html">f_opendir</a>, <a href="readdir.html">f_readdir</a>, <a href="sfileinfo.html">FILINFO</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/sync.html

@@ -0,0 +1,68 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_sync</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_sync</h2>
+<p>The f_sync function flushes the cached information of a writing file.</p>
+<pre>
+FRESULT f_sync (
+  FIL* <em>FileObject</em>     /* Pointer to the file object */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameter</h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd>Pointer to the open file object to be flushed.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd>The file object is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_sync function performs the same process as f_close function but the file is left opened and can continue read/write/seek operations to the file. This is suitable for the applications that open files for a long time in write mode, such as data logger. Performing f_sync of periodic or immediataly after f_write can minimize the risk of data loss due to a sudden blackout or an unintentional disk removal. However f_sync immediataly before f_close has no advantage because f_close performs f_sync in it. In other words, the differnce between those functions is that the file object is invalidated or not. </p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="close.html">f_close</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/truncate.html

@@ -0,0 +1,71 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_truncate</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_truncate</h2>
+<p>The f_truncate function truncates the file size.</p>
+<pre>
+FRESULT f_truncate (
+  FIL* <em>FileObject</em>     /* Pointer to the file object */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameter</h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd>Pointer to the open file object to be truncated.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_DENIED</dt>
+<dd>The file has been opened in read-only mode.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd>The file object is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_truncate function truncates the file size to the current file R/W point. When the file R/W pointer is already pointing end of the file, this function has no effect.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_FS_MINIMIZE == 0</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="lseek.html">f_lseek</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/unlink.html

@@ -0,0 +1,78 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_unlink</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_unlink</h2>
+<p>The f_unlink removes an object.</p>
+<pre>
+FRESULT f_unlink (
+  const XCHAR* <em>FileName</em>  /* Pointer to the object name */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameter</h4>
+<dl class="par">
+<dt>FileName</dt>
+<dd>Pointer to the null-terminated string that specifies an <a href="filename.html">object</a> to be removed.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_NO_FILE</dt>
+<dd>Could not find the file or directory.</dd>
+<dt>FR_NO_PATH</dt>
+<dd>Could not find the path.</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd>The path name is invalid.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_DENIED</dt>
+<dd>The function was denied due to either of following reasons:
+<ul><li>The object has read-only attribute</li><li>The directory is not empty.</li></ul></dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_WRITE_PROTECTED</dt>
+<dd>The medium is write protected.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT volume on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_unlink function removes an object. <em>Do not remove open objects and current directory</em>.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_FS_MINIMIZE == 0</tt>.</p>
+</div>
+
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/utime.html

@@ -0,0 +1,83 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_utime</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_utime</h2>
+<p>The f_utime function changes the timestamp of a file or directory.</p>
+<pre>
+FRESULT f_utime (
+  const XCHAR* <em>FileName</em>,   /* Pointer to the file or directory path */
+  const FILINFO* <em>TimeDate</em>  /* Time and data to be set */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>FileName</dt>
+<dd>Pointer to the null-terminated string that specifies a <a href="filename.html">file or directory</a> to be changed.</dd>
+<dt>TimeDate</dt>
+<dd>Pointer to the file information structure that has a timestamp to be set in member fdate and ftime. Do not care any other members.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_NO_FILE</dt>
+<dd>Could not find the file.</dd>
+<dt>FR_NO_PATH</dt>
+<dd>Could not find the path.</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd>The file name is invalid.</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd>The drive number is invalid.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_WRITE_PROTECTED</dt>
+<dd>The medium is write protected.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd>The logical drive has no work area.</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd>There is no valid FAT volume on the disk.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The f_utime function changes the timestamp of a file or directory</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt> and <tt>_FS_MINIMIZE == 0</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="stat.html">f_stat</a>, <a href="sfileinfo.html">FILINFO</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/en/write.html

@@ -0,0 +1,79 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_e.html">
+<link rel="stylesheet" href="../css_e.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_write</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_write</h2>
+<p>The f_write writes data to a file.</p>
+<pre>
+FRESULT f_write (
+  FIL* <em>FileObject</em>,     /* Pointer to the file object structure */
+  const void* <em>Buffer</em>,  /* Pointer to the data to be written */
+  UINT <em>ByteToWrite</em>,    /* Number of bytes to write */
+  UINT* <em>ByteWritten</em>    /* Pointer to the variable to return number of bytes written */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4>Parameters</h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd>Pointer to the open file object structure.</dd>
+<dt>Buffer</dt>
+<dd>Pointer to the data to be written.</dd>
+<dt>ByteToWrite</dt>
+<dd>Specifies number of bytes to write in range of UINT.</dd>
+<dt>ByteWritten</dt>
+<dd>Pointer to the UINT variable to return the number of bytes written. The value is always valid after the function call regardless of the result.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Return Values</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd>The function succeeded.</dd>
+<dt>FR_DENIED</dt>
+<dd>The function denied due to the file has been opened in non-write mode.</dd>
+<dt>FR_DISK_ERR</dt>
+<dd>The function failed due to an error in the disk function.</dd>
+<dt>FR_INT_ERR</dt>
+<dd>The function failed due to a wrong FAT structure or an internal error.</dd>
+<dt>FR_NOT_READY</dt>
+<dd>The disk drive cannot work due to no medium in the drive or any other reason.</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd>The file object is invalid.</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4>Description</h4>
+<p>The R/W pointer in the file object is increased in number of bytes written. After the function succeeded, <tt>*ByteWritten</tt> should be checked to detect the disk full. In case of <tt>*ByteWritten &lt; ByteToWrite</tt>, it means the volume got full during the write operation.</p>
+</div>
+
+
+<div class="para">
+<h4>QuickInfo</h4>
+<p>Available when <tt>_FS_READONLY == 0</tt>.</p>
+</div>
+
+
+<div class="para">
+<h4>See Also</h4>
+<p><tt><a href="open.html">f_open</a>, <a href="read.html">f_read</a>, <a href="putc.html">fputc</a>, <a href="puts.html">fputs</a>, <a href="printf.html">fprintf</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_e.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/appnote.html

@@ -0,0 +1,194 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFsモジュール アプリケーション・ノート</title>
+</head>
+
+<body>
+<h1>FatFsモジュール アプリケーション・ノート</h1>
+<hr>
+
+<div class="para">
+<h3>ポーティングの際に配慮すべきこと</h3>
+<p>FatFsモジュールは移植性に関して次の点を前提としています。</p>
+<ul>
+<li>処理系はANSI C準拠であること。<br>
+FatFsモジュールはANSI C準拠で記述されているので、ANSI C準拠のコンパイラなら特に処理系依存な点はありません。</li>
+<li>char/short/longのサイズは、それぞれ8/16/32ビットで、intは16または32ビットであること。<br>
+サイズを明示する整数の型が integer.h 内で定義されています。整数の型とサイズに関しては、まっとうな処理系なら問題ないはずですが、既存の定義と衝突した場合はユーザによって解決されなければなりません。</li>
+</ul>
+</div>
+
+<div class="para">
+<h3>メモリ使用量 (R0.07e)</h3>
+<table class="lst2">
+<tr><th></th><th>AVR</th><th>H8/300H</th><th>PIC</th><th>TLCS-870/C</th><th>V850ES</th><th>SH2</th><th>ARM7TDMI</th><th>x86</th></tr>
+<tr><td>Compiler</td><td>WinAVR(gcc)</td><td>CH38</td><td>C30(gcc)</td><td>CC870C</td><td>CA850</td><td>SHC</td><td>WinARM(gcc)</td><td>VC6</td></tr>
+<tr><td>_WORD_ACCESS</td><td>1</td><td>0</td><td>0</td><td>1</td><td>1</td><td>0</td><td>0</td><td>1</td></tr>
+<tr class="lst3"><td>text (Full, R/W)</td><td>12194</td><td>10559</td><td>10924</td><td>15229</td><td>7686</td><td>8727</td><td>10564</td><td>7342</td></tr>
+<tr> <td>text (Min, R/W)</td><td>7988</td><td>6903</td><td>7108</td><td>9960</td><td>4884</td><td>5651</td><td>6544</td><td>4764</td></tr>
+<tr><td>text (Full, R/O)</td><td>5532</td><td>4753</td><td>5020</td><td>6760</td><td>3462</td><td>3777</td><td>4624</td><td>3316</td></tr>
+<tr> <td>text (Min, R/O)</td><td>4040</td><td>3631</td><td>3736</td><td>5083</td><td>2556</td><td>2907</td><td>3284</td><td>2510</td></tr>
+<tr><td>bss</td><td>D*2 + 2</td><td>D*4 + 2</td><td>D*2 + 2</td><td>D*2 + 2</td><td>D*4 + 2</td><td>D*4 + 2</td><td>D*4 + 2</td><td>D*4 + 2</td></tr>
+<tr><td>Work area<br>(_FS_TINY == 0)</td><td>D*560 +<br>F*544</td><td>D*560 +<br>F*550</td><td>D*560 +<br>F*544</td><td></td><td>D*560 +<br>F*550</td><td>D*560 +<br>F*550</td><td>D*560 +<br>F*550</td><td>D*560 +<br>F*550</td></tr>
+<tr><td>Work area<br>(_FS_TINY == 1)</td><td>D*560 +<br>F*32</td><td>D*560 +<br>F*36</td><td>D*560 +<br>F*32</td><td>D*560 +<br>F*32</td><td>D*560 +<br>F*36</td><td>D*560 +<br>F*36</td><td>D*560 +<br>F*36</td><td>D*560 +<br>F*36</td></tr>
+</table>
+<p>上の表にいくつかのターゲットにおけるメモリ使用量の例を示します。テスト時の構成オプションは次の通りです。数値の単位はバイトで、<em>D</em>は論理ドライブ数、<em>F</em>は同時オープン・ファイル数を示します。コンパイラの最適化オプションはコード・サイズとしています。</p>
+<pre>
+_FS_READONLY     0 (R/W), 1 (R/O)
+_FS_MINIMIZE     0 (Full function), 3 (Minimized function)
+_USE_STRFUNC     0 (Disable string functions)
+_USE_MKFS        0 (Disable f_mkfs function)
+_USE_FORWARD     0 (Disable f_forward function)
+_CODE_PAGE       932 (Japanese Shift-JIS)
+_USE_LFN         0 (Disable LFN)
+_LFN_UNICODE     0 (Disable Unicode API)
+_MAX_SS          512 (Single sector size)
+_FS_RPATH        0 (Disable relative path)
+_MULTI_PARTITION 0 (Single partition per drive)
+_FS_REENTRANT    0 (Disable reentrancy)
+</pre>
+</div>
+
+<div class="para">
+<h3>モジュール・サイズの縮小</h3>
+<p>次の表は構成オプションの設定値によりどの機能が削除されるかを示します。</p>
+<table class="lst2">
+<tr><td rowspan="2">Function</td><td colspan="3">_FS_MINIMIZE</td><td>_FS_READONLY</td><td>_USE_STRFUNC</td><td>_FS_RPATH</td><td>_USE_MKFS</td><td>_USE_FORWARD</td></tr>
+<tr><td>1</td><td>2</td><td>3</td><td>1</td><td>0</td><td>0</td><td>0</td><td>0</td></tr>
+<tr class="lst3"><td>f_mount</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_open</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_close</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_read</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_write</td><td></td><td></td><td></td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_sync</td><td></td><td></td><td></td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_lseek</td><td></td><td></td><td>x</td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_opendir</td><td></td><td>x</td><td>x</td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_readdir</td><td></td><td>x</td><td>x</td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_stat</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_getfree</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_truncate</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_unlink</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_mkdir</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_chmod</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_utime</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_rename</td><td>x</td><td>x</td><td>x</td><td>x</td><td></td><td></td><td></td><td></td></tr>
+<tr><td>f_chdir</td><td></td><td></td><td></td><td></td><td></td><td>x</td><td></td><td></td></tr>
+<tr><td>f_chdrive</td><td></td><td></td><td></td><td></td><td></td><td>x</td><td></td><td></td></tr>
+<tr><td>f_mkfs</td><td></td><td></td><td></td><td>x</td><td></td><td></td><td>x</td><td></td></tr>
+<tr><td>f_forward</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td>x</td></tr>
+<tr><td>f_putc</td><td></td><td></td><td></td><td>x</td><td>x</td><td></td><td></td><td></td></tr>
+<tr><td>f_puts</td><td></td><td></td><td></td><td>x</td><td>x</td><td></td><td></td><td></td></tr>
+<tr><td>f_printf</td><td></td><td></td><td></td><td>x</td><td>x</td><td></td><td></td><td></td></tr>
+<tr><td>f_gets</td><td></td><td></td><td></td><td></td><td>x</td><td></td><td></td><td></td></tr>
+</table>
+</div>
+
+<div class="para">
+<h3>長いファイル名</h3>
+<p>FatFsモジュールはR0.07から長いファイル名(LFN)をサポートしました。ファイルに付けられた2つの異なる名前(短いファル名と長いファイル名)は、f_readdir関数を除くファイル操作関数において透過です。LFN機能を有効にするには、<tt>_USE_LFN</tt>を1または2に設定し、Unicode変換関数 ff_convert, ff_wtoupper をプロジェクトに追加します。これらの関数は、<tt>cc*.c</tt>に含まれています。LFN機能は、加えてある程度のワーク・エリア(LFN操作バッファ)を必要とします。バッファ長は使用できるメモリに応じて<tt>_MAX_LFN</tt>オプションで構成されることができます。LFNの長さは最大255文字に達するので、LFN完全対応のためには<tt>_MAX_LFN</tt>は255に設定されるべきです。与えられたファイル名に対してバッファ長が不足した場合、ファイル関数は<tt>FR_INVALID_NAME</tt>で失敗します。</p>
+<p>LFN機能をリエントラント構成で使用する場合は、<tt>_USE_LFN</tt>は2に設定されなければなりません。この場合、ファイル関数はバッファをスタックに確保します。バッファ・サイズは、<tt>(_MAX_LFN + 1) * 2</tt>バイトになるので、呼び出し側スタックのサイズはそれを考慮した十分なサイズでなければなりません。</p>
+<table class="lst2 rset">
+<caption>LFN cfg on ARM7</caption>
+<tr><th>コードページ</th><th>ROMサイズ[bytes]</th></tr>
+<tr><td>SBCS</td><td>+3721</td></tr>
+<tr><td>932(Shift-JIS)</td><td>+62609</td></tr>
+<tr><td>936(GBK)</td><td>+177797</td></tr>
+<tr><td>949(Korean)</td><td>+139857</td></tr>
+<tr><td>950(Big5)</td><td>+111497</td></tr>
+</table>
+<p>LFNを有効にすると、選択されたコード・ページに応じてモジュール・サイズが増大されます。右の表に各コード・ページにおけるLFNを有効にしたときのモジュール・サイズの違いを示します。私たち日本人、中国人および韓国人は数万の文字を持ちます。不幸なことに、それは巨大なOEM－Unicode相互変換テーブルを要求し、モジュール・サイズは劇的に増大されます。その結果、LFNを有効にしたFatFsモジュールは、AVRを含む殆どの8ビット・マイコンにインプリメントされることができません。<small>これは長い間私がLFNをインプリメントすることに興味を持ってこなかった理由です。</small></p>
+<p>注: FATファイル・システム上のLFN機能はマイクロソフト社の特許です。商用製品でそれを有効にするときは、最終仕向地によってはライセンスが必要かも知れません。</p>
+</div>
+
+<div class="para">
+<h3>リエントランシー</h3>
+<p>互いに異なるボリューム(論理ドライブ)に対するファイル操作は、常に同時平行に動作できます。同じボリュームに対してはデフォルトではリエントラントではありませんが、<tt>_FS_REENTRANT</tt>オプションでリエントラントにすることもできます。この場合、OS依存の同期オブジェクト操作関数 ff_cre_syncobj, ff_del_syncobj, ff_req_grant と ff_rel_grant もまたプロジェクトに追加されなければなりません。サンプル・コードと解説は<tt>syncobj.c</tt>にあります。</p>
+<p>あるタスクがボリュームを使用中に他のタスクからそのボリュームに対するファイル関数が呼び出されると、そのアクセスは先のタスクがファイル関数を抜けるまでブロックされます。もし、待ち時間が<tt>_TIMEOUT</tt>で指定された期間を越すと、その関数は<tt>FR_TIMEOUT</tt>でアボートします。いくつかのRTOSではタイムアウト機能はサポートされないかも知れません。</p>
+<p>ひとつの例外がf_mountとf_mkfs関数にあります。これらの関数は同じボリュームに対してリエントラントではありません。これらの関数を使用するときは、アプリケーション・レベルで排他制御しなければなりません。</p>
+<p>注: このセクションはFatFsモジュールそれ自体のリエントランシーについて説明しています。ディスクI/Oモジュールのリエントランシーに関しては何の前提もありません。</p>
+</div>
+
+<div class="para">
+<h3>多重ファイル・アクセス</h3>
+<p>FatFsモジュールでは多重アクセス機能はサポートされません。ファイルに対する多重アクセスは、そのアクセス・モードによって制限されます。一つのファイルに対する多重オープンは、それらが全てリード・モードのときに限って許可されます。書き込みモードを含む多重オープン、また開かれているファイルに対するリネームや消去を行ってはなりません。さもないと、そのボリュームのFAT構造が破壊される可能性があります。</p>
+</div>
+
+<div class="para">
+<h3>効率的なファイル・アクセス</h3>
+<p>小規模な組込システムでのファイルの読み書きにおける効率の良いアクセスのため、アプリケーション・プログラマはFatFsモジュールの中でどのような処理が行われているか考慮すべきです。ディスク上のデータはf_read関数により次のシーケンスで転送されます。</p>
+<p>図1. セクタ・ミスアラインド・リード (ショート)<br>
+<img src="../img/f1.png" width="490" height="73" alt="fig.1">
+</p>
+<p>図2. セクタ・ミスアラインド・リード (ロング)<br>
+<img src="../img/f2.png" width="490" height="140" alt="fig.2">
+</p>
+<p>図3. セクタ・アラインド・リード<br>
+<img src="../img/f3.png" width="490" height="119" alt="fig.3">
+</p>
+<p>ファイルI/Oバッファはセクタの一部のデータを読み書きするためのセクタ・バッファを意味します。セクタ・バッファは、それぞれのファイル・オブジェクト内のプライベート・セクタ・バッファまたはファイル・システム・オブジェクト内の共有セクタ・バッファのどちらかです。バッファ構成オプションの<tt>_FS_TINY</tt>は、データ転送にどちらを使うかを決定します。タイニー・バッファ(1)が選択されるとデータ・メモリの消費はそれぞれのファイル・オブジェクトで512バイト減少されます。この場合、FatFsモジュールはファイル・データの転送とFAT/ディレクトリ・アクセスにファイル・システム・オブジェクト内のセクタ・バッファだけを使用します。タイニー・バッファの欠点は、セクタ・バッファにキャッシュされたFATデータがファイル・データの転送により失われ、クラスタ境界の毎にリロードされなければならないことです。でも、悪くない性能と少ないメモリ消費の視点から多くのアプリケーションに適するでしょう。</p>
+<p>図1はセクタの一部のデータがファイルI/Oバッファを経由で転送されることを示します。図2に示される長いデータの転送では、転送データの中間の1セクタまたはそれ以上のセクタにまたがる転送データがアプリケーション・バッファに直接転送されています。図3は転送データ全体がセクタ境界にアライメントされている場合を示しています。この場合、ファイルI/Oバッファは使用されません。直接転送においては最大の範囲のセクタがdisk_read関数で一度に読み込まれますが、クラスタ境界を越えるマルチ・セクタ転送はそれが隣接であっても行われません。</p>
+<p>このように、セクタにアライメントしたファイルの読み書きへの配慮はバッファ経由のデータ転送を避け、読み書き性能は改善されるでしょう。その効果に加え、タイニー構成でキャッシュされたFATデータがファイル・データの転送によりフラッシュされず、非タイニー構成と同じ性能を小さなメモリ・フットプリントで達成できます。</p>
+</div>
+
+<div class="para">
+<h3>クリチカル・セクション</h3>
+<p>ディスク上のFAT構造を操作している途中で、停電、不正なメディアの取り外し、回復不能なデータ・エラー等の障害が発生すると、処理が中途半端な状態で中断され、その結果としてFAT構造が破壊される可能性があります。次にFatFsモジュールにおけるクリチカル・セクションと、その間の障害により起きうるエラーの状態を示します。</p>
+<div class="lset">
+図4. 長いクリチカル・セクション<br>
+<img src="../img/f4.png" width="320" height="436" alt="fig.4">
+</div>
+<div class="lset">
+図5. 最小化したクリチカル・セクション<br>
+<img src="../img/f5.png" width="320" height="436" alt="fig.5">
+</div>
+<br class="clr">
+<p>赤で示したセクションを実行中に障害が発生した場合、クロス・リンクが発生して操作対象のファイル・ディレクトリが失われる可能性があります。黄色で示したセクションを実行中に障害が発生した場合、つぎのうちいずれかまたは複数の結果が生じる可能性があります。</p>
+<ul>
+<li>書き換え中のファイルのデータが破壊される。</li>
+<li>追記中のファイルがオープン前の状態に戻る。</li>
+<li>新規に作成されたファイルが消える。</li>
+<li>新規または上書きで作成されたファイルの長さがゼロになって残る。</li>
+<li>ロストチェーンの発生によりディスクの利用効率が悪化する。</li>
+</ul>
+<p>いずれも書き込み中や操作対象でないファイルには影響はありません。これらのクリチカル・セクションは、ファイルを書き込みモードで開いている時間を最小限にするか、f_sync()を適宜使用することで図5のようにリスクを最小化することができます。</p>
+</div>
+
+<div class="para">
+<h3>日本語ファイル名の大文字変換</h3>
+<p>CP932(Shift_JIS)でかつ非LFN構成のときは、拡張文字の小文字(2バイト英字・キリル文字・ギリシャ文字)に対して大文字変換を行わず、小文字のままSFNエントリに記録・検索されます。これは日本語MSDOSと同じ仕様となります。このため、全角小文字を含むファイルを作成すると、NT系Windowsでそのファイルを開けなくなります。LFN構成では大文字変換を行います(NT系Windows仕様)。</p>
+</div>
+
+<div class="para">
+<h3>Unicode入出力への対応</h3>
+<p>ファイル関数のファイル名入出力はデフォルトでは OEMコードですが、これをUnicodeに切り替えることもできます。詳細は、<a href="filename.html">ファイル名</a>を参照してください。</p>
+</div>
+
+<div class="para">
+<h3>FatFsのライセンスについて</h3>
+<p>ソース・ファイルのヘッダにライセンス条件が記述されているので、利用の際はそれに従うこと。英語を読めない方のために以下に日本語訳を示しておきます。</p>
+<pre>/*----------------------------------------------------------------------------/
+/  FatFs - FAT file system module  R0.07e                    (C)ChaN, 2009
+/-----------------------------------------------------------------------------/
+/ FatFsモジュールは、小規模な組み込みシステム向けの汎用FATファイルシステム・
+/ モジュールです。これはフリー・ソフトウェアとして、教育・研究・開発のために
+/ 以下のライセンス・ポリシーの下で公開されています。
+/
+/  Copyright (C) 2009, ChaN, all right reserved.
+/
+/ * FatFsモジュールはフリー・ソフトウェアであり、また<em>無保証です</em>。
+/ * 用途に制限はありません。<em>あなたの責任の下において</em>、個人的・非営利的な
+/   ものから商用製品の開発に及ぶ目的に使用・改変・再配布することができます。
+/ * ソース・コードを再配布するときは、上記の著作権表示を保持しなければなりません。
+/
+/-----------------------------------------------------------------------------/</pre>
+<p>要するにFatFsはタダで自由に使えるということです。ソース・コードを再配布するときは、このブロックをそのまま保持しておくこと。このようにFatFsはBSDライクなライセンスとしていますが、一つ大きな違いがあります。特に組み込み用途での利用価値を高めるため、バイナリ形式(ソース・コードを含まない形式全て)での再配布については、条件は設けていません。その場合は、FatFsおよびそのライセンス文書についてはドキュメントに明記してもしなくてもかまいません。もちろんGNU GPLプロジェクトとも共存可能です。何らかの変更を加えて再配布する際は、他のライセンス(GNU GPLかBSDライセンス)に変更することも可能です。</p>
+</div>
+
+<p class="foot"><a href="../00index_j.html">戻る</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/chdir.html

@@ -0,0 +1,91 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_chdir</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_chdir</h2>
+<p><EFBFBD>J<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>N<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ύX<EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+<pre>
+FRESULT f_chdir (
+  const XCHAR* <em>Path</em> /* <20>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^ */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>Path</dt>
+<dd><EFBFBD>ړ<EFBFBD><EFBFBD>Ώۂ̃f<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>N<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><a href="filename.html"><EFBFBD>p<EFBFBD>X<EFBFBD><EFBFBD></a><EFBFBD>̓<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><tt>'\0'</tt><EFBFBD>ŏI<EFBFBD><EFBFBD><EFBFBD>镶<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><EFBFBD>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_NO_FILE</dt>
+<dd><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><C282><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>B</dd>
+<dt>FR_NO_PATH</dt>
+<dd><EFBFBD>p<EFBFBD>X<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>B</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd><EFBFBD>p<EFBFBD>X<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_NOT_READY</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>ȂǁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD>\<5C><><EFBFBD>ԁB</dd>
+<dt>FR_WRITE_PROTECTED</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>݋֎~<7E><><EFBFBD>ԁB</dd>
+<dt>FR_DISK_ERR</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>G<EFBFBD><EFBFBD><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_INT_ERR</dt>
+<dd><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD><EFBFBD>FAT<EFBFBD>\<5C><><EFBFBD>܂<EFBFBD><DC82>͓<EFBFBD><CD93><EFBFBD><EFBFBD>G<EFBFBD><47><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>̘_<EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>Ƀ<EFBFBD><EFBFBD>[<5B>N<EFBFBD>E<EFBFBD>G<EFBFBD><47><EFBFBD>A<EFBFBD><41><EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>Ȃ<EFBFBD><C882>B</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>ɗL<EFBFBD><EFBFBD><EFBFBD><EFBFBD>FAT<EFBFBD>{<7B><><EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><C282><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p>f_chdir<EFBFBD>֐<EFBFBD><EFBFBD>͊e<EFBFBD>{<7B><><EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>̃J<CC83><4A><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>ύX<CF8D><58><EFBFBD>܂<EFBFBD><DC82>B<EFBFBD>J<EFBFBD><4A><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̓t<CD83>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>̏<EFBFBD><CC8F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD><73><EFBFBD>ꂽ<EFBFBD>Ƃ<EFBFBD><C682>A<EFBFBD><41><EFBFBD>[<5B>g<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>ɐݒ肳<DD92><E882B3><EFBFBD>܂<EFBFBD><DC82>B<EFBFBD>J<EFBFBD><4A><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>́A<CD81>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>ɋL<C98B>^<5E><><EFBFBD><EFBFBD><EFBFBD>邽<EFBFBD>߁A<DF81><41><EFBFBD>̃{<7B><><EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>p<EFBFBD><70><EFBFBD><EFBFBD><EFBFBD>S<EFBFBD>Ẵ^<5E>X<EFBFBD>N<EFBFBD>ɑ΂<C991><CE82>ĉe<C489><65><EFBFBD><EFBFBD><EFBFBD>^<5E><><EFBFBD>܂<EFBFBD><DC82>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Ή<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><tt>_FS_RPATH == 1</tt><EFBFBD>̂Ƃ<EFBFBD><EFBFBD>Ɏg<EFBFBD>p<EFBFBD>”\<5C>ƂȂ<C682><C882>܂<EFBFBD><DC82>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>T<EFBFBD><EFBFBD><EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>R<EFBFBD>[<5B>h</h4>
+<pre>
+    // <20>J<EFBFBD><4A><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>̃J<CC83><4A><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>ύX (<28><><EFBFBD>[<5B>g<EFBFBD><67><EFBFBD><EFBFBD>dir1<72><31>)
+    f_chdir("/dir1");
+
+    // <20>h<EFBFBD><68><EFBFBD>C<EFBFBD>u2<75>̃J<CC83><4A><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>ύX (<28>e<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD>)
+    f_chdir("2:..");
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD>Q<EFBFBD><EFBFBD></h4>
+<p><tt><a href="chdrive.html">f_chdrive</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/chdrive.html

@@ -0,0 +1,62 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_chdrive</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_chdrive</h2>
+<p><EFBFBD>J<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD>ύX<EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+<pre>
+FRESULT f_chdrive (
+  BYTE <em>Drive</em> /* <20>_<EFBFBD><5F><EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD> */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd><EFBFBD>J<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ɐݒ肷<EFBFBD><EFBFBD><a href="filename.html"><EFBFBD>_<EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD></a><EFBFBD><EFBFBD><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><EFBFBD>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p>f_chdrive<EFBFBD>֐<EFBFBD><EFBFBD>̓J<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>E<EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD>ύX<EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><EFBFBD><EFBFBD>N<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̏<EFBFBD><EFBFBD><EFBFBD><EFBFBD>l<EFBFBD><EFBFBD>0<EFBFBD>ł<EFBFBD><EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>̐ݒ<EFBFBD><EFBFBD><EFBFBD>FatFs<EFBFBD><EFBFBD><EFBFBD>W<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>̐ÓI<C393>ϐ<EFBFBD><CF90>ɋL<C98B>^<5E><><EFBFBD><EFBFBD><EFBFBD>邽<EFBFBD>߁A<DF81>S<EFBFBD>Ẵ^<5E>X<EFBFBD>N<EFBFBD>ɑ΂<C991><CE82>ĉe<C489><65><EFBFBD><EFBFBD><EFBFBD>^<5E><><EFBFBD>܂<EFBFBD><DC82>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Ή<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><tt>_FS_RPATH == 1</tt><EFBFBD>̂Ƃ<EFBFBD><EFBFBD>Ɏg<EFBFBD>p<EFBFBD>”\<5C>ƂȂ<C682><C882>܂<EFBFBD><DC82>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Q<EFBFBD><EFBFBD></h4>
+<p><tt><a href="chdir.html">f_chdir</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_j.html">Return</a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/chmod.html

@@ -0,0 +1,97 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_chmod</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_chmod</h2>
+<p><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>܂<EFBFBD><DC82>̓f<CD83>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̑<EFBFBD><CC91><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ύX<CF8D><58><EFBFBD>܂<EFBFBD><DC82>B</p>
+<pre>
+FRESULT f_chmod (
+  const XCHAR* <em>FileName</em>, /* <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>܂<EFBFBD><DC82>̓f<CD83>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^ */
+  BYTE <em>Attribute</em>,        /* <20>ݒ<EFBFBD><DD92>l */
+  BYTE <em>AttributeMask</em>     /* <20>ύX<CF8D>}<7D>X<EFBFBD>N */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>FileName</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ύX<EFBFBD>Ώۂ̃t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>܂<EFBFBD><DC82>̓f<CD83>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><a href="filename.html"><EFBFBD>p<EFBFBD>X<EFBFBD><EFBFBD></a><EFBFBD>̓<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><tt>'\0'</tt><EFBFBD>ŏI<EFBFBD><EFBFBD><EFBFBD>镶<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><EFBFBD>B</dd>
+<dt>Attribute</dt>
+<dd><EFBFBD>ݒ肷<EFBFBD>鑮<EFBFBD><EFBFBD><EFBFBD>B<EFBFBD>w<EFBFBD><EFBFBD><EFBFBD>”\<5C>ȑ<EFBFBD><C891><EFBFBD><EFBFBD>͎<EFBFBD><CD8E>̒ʂ<CC92><CA82>ŁA<C581><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̑g<CC91>ݍ<EFBFBD><DD8D>킹<EFBFBD>Ŏw<C58E>肵<EFBFBD>܂<EFBFBD><DC82>B<EFBFBD>w<EFBFBD>肳<EFBFBD><E882B3><EFBFBD>Ȃ<EFBFBD><C882><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͉<EFBFBD><CD89><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B<br>
+<table class="lst">
+<tr><th><EFBFBD>l</th><th><EFBFBD>Ӗ<EFBFBD></th></tr>
+<tr><td>AM_RDO</td><td><EFBFBD><EFBFBD><EFBFBD>[<5B>h<EFBFBD>E<EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD>[</td></tr>
+<tr><td>AM_ARC</td><td><EFBFBD>A<EFBFBD>[<5B>J<EFBFBD>C<EFBFBD>u</td></tr>
+<tr><td>AM_SYS</td><td><EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><EFBFBD></td></tr>
+<tr><td>AM_HID</td><td><EFBFBD>q<EFBFBD>h<EFBFBD>D<EFBFBD><EFBFBD></td></tr>
+</table>
+</dd>
+<dt>AttributeMask</dt>
+<dd><EFBFBD>ύX<EFBFBD><EFBFBD><EFBFBD>鑮<EFBFBD><EFBFBD><EFBFBD>̃}<7D>X<EFBFBD>N<EFBFBD>B<EFBFBD>w<EFBFBD>肵<EFBFBD><E882B5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݒ<EFBFBD><DD92>܂<EFBFBD><DC82>͉<EFBFBD><CD89><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD>w<EFBFBD>肳<EFBFBD><E882B3><EFBFBD>Ȃ<EFBFBD><C882><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͏<EFBFBD><CD8F>Ԃ<EFBFBD><D482>ێ<EFBFBD><DB8E><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B<tt>Attribute</tt><EFBFBD>Ɠ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>l<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_NO_FILE</dt>
+<dd><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><C282><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>B</dd>
+<dt>FR_NO_PATH</dt>
+<dd><EFBFBD>p<EFBFBD>X<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>B</dd>
+<dt>FR_INVALID_NAME</dt>
+<dd><EFBFBD>p<EFBFBD>X<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_NOT_READY</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>ȂǁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD>\<5C><><EFBFBD>ԁB</dd>
+<dt>FR_WRITE_PROTECTED</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>݋֎~<7E><><EFBFBD>ԁB</dd>
+<dt>FR_DISK_ERR</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>G<EFBFBD><EFBFBD><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_INT_ERR</dt>
+<dd><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD><EFBFBD>FAT<EFBFBD>\<5C><><EFBFBD>܂<EFBFBD><DC82>͓<EFBFBD><CD93><EFBFBD><EFBFBD>G<EFBFBD><47><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>̘_<EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>Ƀ<EFBFBD><EFBFBD>[<5B>N<EFBFBD>E<EFBFBD>G<EFBFBD><47><EFBFBD>A<EFBFBD><41><EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>Ȃ<EFBFBD><C882>B</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>ɗL<EFBFBD><EFBFBD><EFBFBD><EFBFBD>FAT<EFBFBD>{<7B><><EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><C282><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>܂<EFBFBD><DC82>̓f<CD83>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>̑<EFBFBD><CC91><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ύX<CF8D><58><EFBFBD>܂<EFBFBD><DC82>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Ή<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><tt>_FS_READONLY == 0</tt><EFBFBD>ŁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><tt>_FS_MINIMIZE == 0</tt><EFBFBD>̂Ƃ<EFBFBD><EFBFBD>g<EFBFBD>p<EFBFBD>”\<5C>ł<EFBFBD><C582>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>g<EFBFBD>p<EFBFBD><EFBFBD></h4>
+<pre>
+    /* <20><><EFBFBD>[<5B>h<EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>Z<EFBFBD>b<EFBFBD>g<EFBFBD>A<EFBFBD>A<EFBFBD>[<5B>J<EFBFBD>C<EFBFBD>u<EFBFBD><75><EFBFBD>N<EFBFBD><4E><EFBFBD>A<EFBFBD>A<EFBFBD><41><EFBFBD>̑<EFBFBD><CC91>͕ύX<CF8D><58><EFBFBD>Ȃ<EFBFBD> */
+    f_chmod("file.txt", AM_RDO, AM_RDO | AM_ARC);
+</pre>
+</div>
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/close.html

@@ -0,0 +1,68 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_close</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_close</h2>
+<p><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><C282>܂<EFBFBD><DC82>B</p>
+<pre>
+FRESULT f_close (
+  FIL* <em>FileObject</em>     /* <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^ */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd><EFBFBD>‚<EFBFBD><EFBFBD>悤<EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>\<5C><><EFBFBD>̂ւ̃|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_DISK_ERR</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>G<EFBFBD><EFBFBD><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_INT_ERR</dt>
+<dd><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD><EFBFBD>FAT<EFBFBD>\<5C><><EFBFBD>܂<EFBFBD><DC82>͓<EFBFBD><CD93><EFBFBD><EFBFBD>G<EFBFBD><47><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_NOT_READY</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>ȂǁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD>\<5C><><EFBFBD>ԁB</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ȃt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><C282>܂<EFBFBD><DC82>B<EFBFBD><42><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>݂̍s<CC8D><73><EFBFBD>ꂽ<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̏ꍇ<CC8F>A<EFBFBD>L<EFBFBD><4C><EFBFBD>b<EFBFBD>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD><EA82BD><EFBFBD>ԁiR/W<>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40><><EFBFBD>̃f<CC83>[<5B>^<5E>A<EFBFBD>ύX<CF8D><58><EFBFBD>ꂽFAT<41><54><EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>ځj<DA81>̓f<CD83>B<EFBFBD>X<EFBFBD>N<EFBFBD>ɏ<EFBFBD><C98F><EFBFBD><EFBFBD>߂<EFBFBD><DF82><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B<EFBFBD>֐<EFBFBD><D690><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ƁA<C681><41><EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>͖<EFBFBD><CD96><EFBFBD><EFBFBD>ɂȂ<C982><C882>A<EFBFBD><41><EFBFBD>̃<EFBFBD><CC83><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582>܂<EFBFBD><DC82>B<EFBFBD>ǂݍ<C782><DD8D>ݐ<EFBFBD><DD90>p<EFBFBD><70><EFBFBD>[<5B>h<EFBFBD>ŊJ<C58A><4A><EFBFBD>ꂽ<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>́A<CD81><41><EFBFBD>̊֐<CC8A><D690>ɂ<EFBFBD><C982><EFBFBD><EFBFBD>N<EFBFBD><4E><EFBFBD>[<5B>Y<EFBFBD><59><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD><6F><EFBFBD>ɔj<C994><6A><EFBFBD><EFBFBD><EFBFBD>邱<EFBFBD>Ƃ<EFBFBD><C682>ł<EFBFBD><C582>܂<EFBFBD><DC82>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Ή<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><EFBFBD>S<EFBFBD>Ă̍\<5C><><EFBFBD>Ŏg<C58E>p<EFBFBD>”\<5C>ł<EFBFBD><C582>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Q<EFBFBD><EFBFBD></h4>
+<tt><a href="open.html">f_open</a>, <a href="read.html">f_read</a>, <a href="write.html">f_write</a>,  <a href="sync.html">f_sync</a>, <a href="sfile.html">FIL</a>, <a href="sfatfs.html">FATFS</a></tt>
+</div>
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/dinit.html

@@ -0,0 +1,45 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_initialize</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_initialize</h2>
+<p><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+<pre>
+DSTATUS disk_initialize (
+  BYTE <em>Drive</em>      /* <20><><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD> */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>镨<EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD>(0-9)<29><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<p><EFBFBD><EFBFBD><EFBFBD>̊֐<EFBFBD><EFBFBD>͖߂<EFBFBD><EFBFBD>l<EFBFBD>Ƃ<EFBFBD><EFBFBD>ăf<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>X<EFBFBD>e<EFBFBD>[<5B>^<5E>X<EFBFBD><58><EFBFBD>Ԃ<EFBFBD><D482>܂<EFBFBD><DC82>B<EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>X<EFBFBD>e<EFBFBD>[<5B>^<5E>X<EFBFBD>̏ڍׂɊւ<C98A><D682>Ă<EFBFBD><tt><a href="dstat.html">disk_status()</a></tt><EFBFBD><EFBFBD><EFBFBD>Q<EFBFBD>Ƃ<EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B</p>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B<EFBFBD>֐<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ƁA<EFBFBD>߂<EFBFBD><EFBFBD>l<EFBFBD><EFBFBD><tt>STA_NOINIT</tt><EFBFBD>t<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD><EFBFBD><EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+<p>FatFs<EFBFBD><EFBFBD><EFBFBD>W<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>́A<CD81><41><EFBFBD><EFBFBD><EFBFBD>}<7D>E<EFBFBD><45><EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>ɂ<EFBFBD><C982><EFBFBD><EFBFBD>K<EFBFBD>v<EFBFBD>ɉ<EFBFBD><C989><EFBFBD><EFBFBD>Ă<EFBFBD><C482>̊֐<CC8A><D690><EFBFBD><EFBFBD>Ăяo<D18F><6F><EFBFBD>܂<EFBFBD><DC82>B<em>FatFs<EFBFBD><EFBFBD><EFBFBD>W<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>g<EFBFBD>p<EFBFBD><70><EFBFBD>̓A<CD83>v<EFBFBD><76><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>炱<EFBFBD>̊֐<CC8A><D690><EFBFBD><EFBFBD>Ăяo<D18F><6F><EFBFBD>Ă͂Ȃ<CD82><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B<EFBFBD><42><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882><EFBFBD>FAT<41>\<5C><><EFBFBD><EFBFBD><EFBFBD>j<EFBFBD>󂳂<EFBFBD><F382B382><EFBFBD><EFBFBD>”\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B<EFBFBD>G<EFBFBD><47><EFBFBD>[<5B><><EFBFBD>ɂ<EFBFBD><C982><EFBFBD><EFBFBD>ď<EFBFBD><C48F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>K<EFBFBD>v<EFBFBD>ȂƂ<C882><C682>́A<tt>f_mount()</tt><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>p<EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</em></p>
+</div>
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/dioctl.html

@@ -0,0 +1,67 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_ioctl</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_ioctl</h2>
+<p><EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E>̓ǂݏ<C782><DD8F><EFBFBD><EFBFBD>ȊO<C88A>̃f<CC83>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD><75><EFBFBD>̂ɑ΂<C991><CE82><EFBFBD><EFBFBD>l<EFBFBD>X<EFBFBD>Ȑ<EFBFBD><C890><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</p>
+<pre>
+DRESULT disk_ioctl (
+  BYTE <em>Drive</em>,      /* <20><><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD> */
+  BYTE <em>Command</em>,    /* <20><><EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>}<7D><><EFBFBD>h */
+  void* <em>Buffer</em>     /* <20>f<EFBFBD>[<5B>^<5E>󂯓n<F382AF93><6E><EFBFBD>o<EFBFBD>b<EFBFBD>t<EFBFBD>@ */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD>(0-9)<29><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>Command</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>}<7D><><EFBFBD>h<EFBFBD>E<EFBFBD>R<EFBFBD>[<5B>h<EFBFBD><68><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>Buffer</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>}<7D><><EFBFBD>h<EFBFBD>Ɉˑ<C988><CB91><EFBFBD><EFBFBD><EFBFBD><EFBFBD>p<EFBFBD><70><EFBFBD><EFBFBD><EFBFBD>[<5B>^<5E><><EFBFBD><EFBFBD><EFBFBD>󂷂<EFBFBD><F382B782>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40><><EFBFBD>w<EFBFBD><77><EFBFBD>|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B<EFBFBD>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40><><EFBFBD>g<EFBFBD>p<EFBFBD><70><EFBFBD>Ȃ<EFBFBD><C882>R<EFBFBD>}<7D><><EFBFBD>h<EFBFBD>̏ꍇ<CC8F>́ANULL<4C><4C><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<dl class="ret">
+<dt>RES_OK (0)</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>RES_ERROR</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>炩<EFBFBD>̃G<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>RES_PARERR</dt>
+<dd><EFBFBD>R<EFBFBD>}<7D><><EFBFBD>h<EFBFBD><68><EFBFBD>s<EFBFBD><73><EFBFBD>B</dd>
+<dt>RES_NOTRDY</dt>
+<dd><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>”\<5C><><EFBFBD>Ԃł͂Ȃ<CD82><C882>A<EFBFBD>܂<EFBFBD><DC82>͏<EFBFBD><CD8F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>Ȃ<EFBFBD><C882>B</dd>
+</dl>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>̎<EFBFBD><EFBFBD>ނɂ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>T<EFBFBD>|<7C>[<5B>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>}<7D><><EFBFBD>h<EFBFBD>͈قȂ<D982><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>AFatFs<46><73><EFBFBD>W<EFBFBD><57><EFBFBD>[<5B><><EFBFBD>ł́A<CD81><41><EFBFBD>̔ėp<C497>R<EFBFBD>}<7D><><EFBFBD>h<EFBFBD>̂ݎg<DD8E>p<EFBFBD><70><EFBFBD>A<EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>̎<EFBFBD><CC8E>ނɈˑ<C988><CB91><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͍s<CD8D><73><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B</p>
+<p><EFBFBD><EFBFBD><EFBFBD>̊֐<EFBFBD><EFBFBD>̓<EFBFBD><EFBFBD>[<5B>h<EFBFBD>E<EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD>[<5B>\<5C><><EFBFBD>ł͕K<CD95>v<EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B</p>
+<table class="lst">
+<tr><th><EFBFBD>R<EFBFBD>}<7D><><EFBFBD>h</th><th><EFBFBD><EFBFBD><EFBFBD><EFBFBD></th></tr>
+<tr><td>CTRL_SYNC</td><td><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>[<5B>^<5E>̏<EFBFBD><CC8F><EFBFBD><EFBFBD><EFBFBD><EFBFBD>݂<EFBFBD><DD82><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂<EFBFBD><CC82>҂<EFBFBD><D282>܂<EFBFBD><DC82>B<EFBFBD><42><EFBFBD>C<EFBFBD>g<EFBFBD>E<EFBFBD>o<EFBFBD>b<EFBFBD>N<EFBFBD>E<EFBFBD>L<EFBFBD><4C><EFBFBD>b<EFBFBD>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>́A<CD81><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>Ă<EFBFBD><C482>Ȃ<EFBFBD><C882>f<EFBFBD>[<5B>^<5E>𑦎<EFBFBD><F091A68E><EFBFBD><EFBFBD><EFBFBD><EFBFBD>߂<EFBFBD><DF82>܂<EFBFBD><DC82>B</td></tr>
+<tr><td>GET_SECTOR_SIZE</td><td>Buffer<EFBFBD>̎w<EFBFBD><EFBFBD>WORD<EFBFBD>ϐ<EFBFBD><EFBFBD>Ƀh<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>̃Z<EFBFBD>N<EFBFBD>^<5E>E<EFBFBD>T<EFBFBD>C<EFBFBD>Y<EFBFBD><59><EFBFBD>Ԃ<EFBFBD><D482>܂<EFBFBD><DC82>B_MAX_SS<53><53>1024<32>ȏ<EFBFBD><C88F>̂Ƃ<CC82><C682>K<EFBFBD>v<EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</td></tr>
+<tr><td>GET_SECTOR_COUNT</td><td>Buffer<EFBFBD>̎w<EFBFBD><EFBFBD>DWORD<EFBFBD>ϐ<EFBFBD><EFBFBD>Ƀh<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD>̑<EFBFBD><EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD>Ԃ<EFBFBD><D482>܂<EFBFBD><DC82>Bf_mkfs<66><73><EFBFBD>ł̂ݎg<DD8E>p<EFBFBD>B</td></tr>
+<tr><td>GET_BLOCK_SIZE</td><td>Buffer<EFBFBD>̎w<EFBFBD><EFBFBD>DWORD<EFBFBD>ϐ<EFBFBD><EFBFBD>Ƀ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>[<5B>̏<EFBFBD><CC8F><EFBFBD><EFBFBD>u<EFBFBD><75><EFBFBD>b<EFBFBD>N<EFBFBD>T<EFBFBD>C<EFBFBD>Y<EFBFBD><59><EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E>P<EFBFBD>ʂŕԂ<C595><D482>܂<EFBFBD><DC82>B<EFBFBD>s<EFBFBD><73><EFBFBD>ȏꍇ<C88F>܂<EFBFBD><DC82><EFBFBD>HDD<44>ł<EFBFBD>1<EFBFBD><31><EFBFBD>Ԃ<EFBFBD><D482>܂<EFBFBD><DC82>Bf_mkfs<66><73><EFBFBD>ł̂ݎg<DD8E>p<EFBFBD>B</td></tr>
+</table>
+</div>
+
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/dread.html

@@ -0,0 +1,58 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_read</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_read</h2>
+<p><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E><><EFBFBD>ǂݏo<DD8F><6F><EFBFBD>܂<EFBFBD><DC82>B</p>
+<pre>
+DRESULT disk_read (
+  BYTE <em>Drive</em>,          /* <20><><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD> */
+  BYTE* <em>Buffer</em>,        /* <20>ǂݏo<DD8F><6F><EFBFBD>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^ */
+  DWORD <em>SectorNumber</em>,  /* <20>ǂݏo<DD8F><6F><EFBFBD>J<EFBFBD>n<EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E>ԍ<EFBFBD> */
+  BYTE <em>SectorCount</em>     /* <20>ǂݏo<DD8F><6F><EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E><> */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD>(0-9)<29><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>Buffer</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǂݏo<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>[<5B>^<5E><><EFBFBD>i<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD>z<EFBFBD><7A><EFBFBD>ŁA<C581>ǂݏo<DD8F><6F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>̃T<CC83>C<EFBFBD>Y<EFBFBD><59><EFBFBD>K<EFBFBD>v<EFBFBD>ł<EFBFBD><C582>B<EFBFBD>A<EFBFBD>h<EFBFBD><68><EFBFBD>X<EFBFBD>̓A<CD83><41><EFBFBD>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD>Ƃ͌<C682><CD8C><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B</dd>
+<dt>SectorNumber</dt>
+<dd><EFBFBD>ǂݏo<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>J<EFBFBD>n<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E>ԍ<EFBFBD><D48D>BLBA<42>Ŏw<C58E>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>SectorCount</dt>
+<dd><EFBFBD>ǂݏo<EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E><><EFBFBD>B 1<>`255<35>͈̔͂Őݒ肵<DD92>܂<EFBFBD></dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<dl class="ret">
+<dt>RES_OK (0)</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>RES_ERROR</dt>
+<dd><EFBFBD>ǂݍ<EFBFBD><EFBFBD>ݒ<EFBFBD><EFBFBD>ɃG<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><41><EFBFBD>̉񕜂ɂ<F1959C82><C982><EFBFBD><EFBFBD>s<EFBFBD><73><EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>RES_PARERR</dt>
+<dd><EFBFBD>p<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>[<5B>^<5E><><EFBFBD>s<EFBFBD><73><EFBFBD>B</dd>
+<dt>RES_NOTRDY</dt>
+<dd><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>”\<5C><><EFBFBD>Ԃł͂Ȃ<CD82><C882>i<EFBFBD><69><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>Ȃ<EFBFBD><C882>j<EFBFBD>B</dd>
+</dl>
+</div>
+
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/dstat.html

@@ -0,0 +1,47 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_status</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_status</h2>
+<p><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>̏<EFBFBD><EFBFBD>Ԃ<EFBFBD><EFBFBD>擾<EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+<pre>
+DSTATUS disk_status (
+  BYTE <em>Drive</em>           /* <20><><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD> */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd><EFBFBD>X<EFBFBD>e<EFBFBD>[<5B>^<5E>X<EFBFBD><58><EFBFBD>擾<EFBFBD><E693BE><EFBFBD>镨<EFBFBD><E995A8><EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD><D48D><EFBFBD><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<p><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>̏<EFBFBD><EFBFBD>Ԃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>̃t<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>̑g<EFBFBD>ݍ<EFBFBD><EFBFBD>킹<EFBFBD>̒l<EFBFBD>ŕԂ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+<dl class="ret">
+<dt>STA_NOINIT</dt>
+<dd><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>B<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>b<EFBFBD>g<EFBFBD>⃁<EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD>̎<EFBFBD><EFBFBD><EFBFBD><EFBFBD>O<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ŃZ<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Adisk_initialize() <20>̐<EFBFBD><CC90><EFBFBD><EFBFBD>I<EFBFBD><49><EFBFBD>ŃN<C583><4E><EFBFBD>A<EFBFBD>A<EFBFBD><41><EFBFBD>s<EFBFBD>ŃZ<C583>b<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>STA_NODISK</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>O<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ԃ̓Z<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ԃ̓N<EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B<EFBFBD>Œ<EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>ł͏<EFBFBD><EFBFBD>ɃN<EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</dd>
+<dt>STA_PROTECTED</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>g<EFBFBD>E<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>e<EFBFBD>N<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>邱<EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>g<EFBFBD>E<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>e<EFBFBD>N<EFBFBD>g<EFBFBD>@<40>\<5C><><EFBFBD>T<EFBFBD>|<7C>[<5B>g<EFBFBD><67><EFBFBD>Ȃ<EFBFBD><C882><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD>ł͏<C582><CD8F>ɃN<C983><4E><EFBFBD>A<EFBFBD><41><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/dwrite.html

@@ -0,0 +1,66 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - disk_write</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>disk_write</h2>
+<p><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>Ƀf<EFBFBD>[<5B>^<5E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>݂܂<DD82><DC82>B</p>
+<pre>
+DRESULT disk_write (
+  BYTE <em>Drive</em>,          /* <20><><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><68><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD> */
+  const BYTE* <em>Buffer</em>,  /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ރf<DE83>[<5B>^<5E>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^ */
+  DWORD <em>SectorNumber</em>,  /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>݊J<DD8A>n<EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E>ԍ<EFBFBD> */
+  BYTE <em>SectorCount</em>     /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>݃Z<DD83>N<EFBFBD>^<5E><> */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>Drive</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD>(0-9)<29><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>Buffer</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>ɏ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ރo<EFBFBD>C<EFBFBD>g<EFBFBD>z<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><EFBFBD>B<EFBFBD>A<EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>̓A<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ͌<EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>SectorNumber</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>݂<EFBFBD><EFBFBD>J<EFBFBD>n<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>N<EFBFBD>^<5E>ԍ<EFBFBD><D48D>BLBA<42>Ŏw<C58E>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>SectorCount</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ރZ<EFBFBD>N<EFBFBD>^<5E><><EFBFBD>B 1<>`255<35>Őݒ肵<DD92>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<dl class="ret">
+<dt>RES_OK (0)</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>RES_ERROR</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݒ<EFBFBD><EFBFBD>ɃG<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><41><EFBFBD>̉񕜂ɂ<F1959C82><C982><EFBFBD><EFBFBD>s<EFBFBD><73><EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>RES_WRPRT</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>݋֎~<7E><><EFBFBD>ԁB</dd>
+<dt>RES_PARERR</dt>
+<dd><EFBFBD>p<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>[<5B>^<5E><><EFBFBD>s<EFBFBD><73><EFBFBD>B</dd>
+<dt>RES_NOTRDY</dt>
+<dd><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>”\<5C><><EFBFBD>Ԃł͂Ȃ<CD82><C882>i<EFBFBD><69><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>Ȃ<EFBFBD><C882>j<EFBFBD>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><EFBFBD><EFBFBD><EFBFBD>[<5B>h<EFBFBD>E<EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD>[<5B>\<5C><><EFBFBD>ł͂<C582><CD82>̊֐<CC8A><D690>͕K<CD95>v<EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B</p>
+</div>
+
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/fattime.html

@@ -0,0 +1,50 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - get_fattime</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>get_fattime</h2>
+<p><EFBFBD><EFBFBD><EFBFBD>ݎ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>擾<EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+<pre>
+DWORD get_fattime (void);
+</pre>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<p><EFBFBD><EFBFBD><EFBFBD>݂̃<EFBFBD><EFBFBD>[<5B>J<EFBFBD><4A><EFBFBD>E<EFBFBD>^<5E>C<EFBFBD><43><EFBFBD><EFBFBD><tt>DWORD</tt><EFBFBD>l<EFBFBD>Ƀp<EFBFBD>b<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĕԂ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B<EFBFBD>r<EFBFBD>b<EFBFBD>g<EFBFBD>E<EFBFBD>t<EFBFBD>B<EFBFBD>[<5B><><EFBFBD>h<EFBFBD>͎<EFBFBD><CD8E>Ɏ<EFBFBD><C98E><EFBFBD><EFBFBD>悤<EFBFBD>ɂȂ<C982><C882>܂<EFBFBD><DC82>B</p>
+<dl>
+<dt>bit31:25</dt>
+<dd>1980<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>N<EFBFBD>_<EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>N<EFBFBD><EFBFBD> 0..127 <20>œ<EFBFBD><C593><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>bit24:21</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1..12 <20>̒l<CC92>œ<EFBFBD><C593><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>bit20:16</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1..31 <20>̒l<CC92>œ<EFBFBD><C593><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>bit15:11</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 0..23 <20>̒l<CC92>œ<EFBFBD><C593><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>bit10:5</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 0..59 <20>̒l<CC92>œ<EFBFBD><C593><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>bit4:0</dt>
+<dd><EFBFBD>b/2<><32> 0..29 <20>̒l<CC92>œ<EFBFBD><C593><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p>RTC<EFBFBD><EFBFBD><EFBFBD>T<EFBFBD>|<7C>[<5B>g<EFBFBD><67><EFBFBD>Ȃ<EFBFBD><C882>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>ł<EFBFBD><C582>A<EFBFBD><41><EFBFBD>炩<EFBFBD>̓<EFBFBD><CC93>t<EFBFBD>Ƃ<EFBFBD><C682>ėL<C497><4C><EFBFBD>Ȓl<C892><6C><EFBFBD>Ԃ<EFBFBD><D482>Ȃ<EFBFBD><C882><EFBFBD><EFBFBD>΂Ȃ<CE82><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B0<42><30><EFBFBD>Ԃ<EFBFBD><D482><EFBFBD><EFBFBD>ꍇ<EFBFBD>A<EFBFBD><41><EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD>͓<EFBFBD><CD93>t<EFBFBD><74><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B<EFBFBD><42><EFBFBD>[<5B>h<EFBFBD>E<EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD>[<5B>\<5C><><EFBFBD>ł͂<C582><CD82>̊֐<CC8A><D690>͕K<CD95>v<EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B</p>
+</div>
+
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/filename.html

@@ -0,0 +1,67 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - ファイル・ディレクトリの指定方法</title>
+</head>
+
+<body>
+<div class="para">
+<h2>ファイル・ディレクトリの指定方法</h2>
+<p>FatFsモジュールでのファイル、ディレクトリ、ドライブの指定方法はDOS/Windowsとほぼ同じです。パス名のフォーマットは次の通りです。</p>
+<pre>
+ "[<em>論理ドライブ番号</em>:][/]<em>ディレクトリ名</em>/<em>ファイル名</em>"
+</pre>
+<p>FatFsモジュールは長いファイル名(LFN)および8.3形式ファイル名(SFN)に対応しています。LFNは、<tt>(_USE_LFN &gt; 0)</tt>のとき使用可能になります。DOS/Windowsとの違いは、ディレクトリ・セパレータと論理ドライブ番号の指定です。ディレクトリ・セパレータには / または \ を使用します。論理ドライブ番号は、'0'～'9'の一文字の数字とコロンで指定し、省略した場合はデフォルト・ドライブ(0またはカレント・ドライブ)が選択されます。パス名に先行あるいは中に含まれるスペースは、LFN構成では名前の一部として有効ですが、非LFN構成ではパス名の終端として認識されます。</p>
+<p>標準構成<tt>(_FS_RPATH == 0)</tt>のときは、全てのオブジェクトがルート・ディレクトリから辿る絶対パスで指定されます。OS指向なカレント・ディレクトリという概念は無く、またドット・ディレクトリ(&quot;.&quot;や&quot;..&quot;)は使用できません。パス名先頭のセパレータは無視されます。デフォルト・ドライブ番号は常に0になります。</p>
+<p>相対パスを有効<tt>(_FS_RPATH == 1)</tt>にしたときは、先行するセパレータの有無によって検索開始ディレクトリが変わり、セパレータがある場合はルート・ディレクトリから、無い場合は<a href="chdir.html">f_chdir関数</a>で設定されるカレント・ディレクトリからになります。またパス名にドット・ディレクトリが使用できます。デフォルト・ドライブ番号は<a href="chdrive.html">f_chdrive関数</a>で設定された値となります。</p>
+<table class="lst2">
+<tr><td>パス名</td><td>_FS_RPATH == 0</td><td>_FS_RPATH == 1</td></tr>
+<tr class="lst3"><td>file.txt</td><td>ドライブ0のルート・ディレクトリ下のファイル</td><td>カレント・ドライブのカレント・ディレクトリ下のファイル</td></tr>
+<tr><td>/file.txt</td><td>ドライブ0のルート・ディレクトリ下のファイル</td><td>カレント・ドライブのルート・ディレクトリ下のファイル</td></tr>
+<tr><td></td><td>ドライブ0のルート・ディレクトリ</td><td>カレント・ドライブのカレント・ディレクトリ</td></tr>
+<tr><td>2:</td><td>ドライブ2のルート・ディレクトリ</td><td>ドライブ2のカレント・ディレクトリ</td></tr>
+<tr><td>2:file1.txt</td><td>ドライブ2のルート・ディレクトリ下のファイル</td><td>ドライブ2のカレント・ディレクトリ下のファイル</td></tr>
+<tr><td>2:/</td><td>ドライブ2のルート・ディレクトリ</td><td>ドライブ2のルート・ディレクトリ</td></tr>
+<tr><td>../file.txt</td><td>無効</td><td>親ディレクトリ下のファイル</td></tr>
+<tr><td>.</td><td>無効</td><td>このディレクトリ</td></tr>
+<tr><td>..</td><td>無効</td><td>カレント・ディレクトリの親ディレクトリ</td></tr>
+<tr><td>dir1/..</td><td>無効</td><td>カレント・ディレクトリ</td></tr>
+<tr><td>/..</td><td>無効</td><td>無効(ルート・ディレクトリではドット名は使用不可)</td></tr>
+</table>
+</div>
+
+<p><br></p>
+<div class="para">
+<h2>Unicode API</h2>
+<p>ファイル関数の入出力のうちファイル名やパス名を指定する引数の型は、<tt>XCHAR</tt>で定義されていますが、これは<tt>char</tt>のエリアスになっています。そして、<tt>_CODE_PAGE</tt>で指定される OEMコード(SBCSまたはDBCS)の文字列として扱われます。ファイル名入出力をUnicodeとする構成(LFN構成で、かつ<tt>_LFN_UNICODE</tt>を 1)にしたときは、<tt>XCHAR</tt>はワイド文字(<tt>unsigned short</tt>)に切り替わり、パス名にUnicodeを使用するようになります。これにより LFNフル対応となり、OEMコードにない文字(たとえば ✝☪✡☸☭など)も使用できます。</p>
+</div>
+
+<p><br></p>
+<div class="para">
+<h2>論理ドライブ(ボリューム)と物理ドライブ(ディスク装置)の対応</h2>
+<p>デフォルトの構成では、それぞれの論理ドライブは同じ番号の物理ドライブに1:1で結びつけられていて、物理ドライブの先頭の区画がマウントされます。<tt>_MULTI_PARTITION</tt>に 1を指定すると、論理ドライブに対して個別に物理ドライブ番号・区画を指定できるようになります。この構成では、論理ドライブと区画の対応を解決するためのテーブルを次に示すように定義する必要があります。</p>
+<pre>
+例:論理ドライブ0～2を物理ドライブ0(固定ディスク)の3つの基本区画に割り当て、
+   論理ドライブ3を物理ドライブ1(リムーバブル・ディスク)に割り当てる場合。
+
+const PARTITION Drives[] = {
+    {0, 0},     /* Logical drive 0 ==> Physical drive 0, 1st partition */
+    {0, 1},     /* Logical drive 1 ==> Physical drive 0, 2nd partition */
+    {0, 2},     /* Logical drive 2 ==> Physical drive 0, 3rd partition */
+    {1, 0}      /* Logical drive 3 ==> Physical drive 1 */
+};
+</pre>
+<p>複数区画指定を使用する場合、次の点に注意しなければなりません。
+<ul>
+<li>指定可能な区画は基本区画(0～3)のみ。</li>
+<li>物理ドライブがSFD形式(区画テーブル無し)の場合、区画指定は無視される。</li>
+<li>複数の論理ドライブを持つ物理ドライブは、固定ディスクでなければならない。</li>
+</ul>
+</div>
+
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/forward.html

@@ -0,0 +1,141 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_forward</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_forward</h2>
+<p><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>[<5B>^<5E><><EFBFBD>ǂݏo<DD8F><6F><EFBFBD>A<EFBFBD><41><EFBFBD>M<EFBFBD>X<EFBFBD>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD>ɒ<EFBFBD><C992>ړ]<5D><><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</p>
+<pre>
+FRESULT f_forward (
+  FIL* <em>FileObject</em>,                 /* <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>\<5C><><EFBFBD><EFBFBD> */
+  UINT (*<em>Func</em>)(const BYTE*,UINT),  /* <20>f<EFBFBD>[<5B>^<5E>]<5D><><EFBFBD>֐<EFBFBD> */
+  UINT <em>ByteToFwd</em>,                  /* <20>]<5D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD><67> */
+  UINT* <em>ByteFwd</em>                    /* <20>]<5D><><EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD><67> */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>FileObject</dt>
+<dd><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>\<5C><><EFBFBD>̂ւ̃|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>Func</dt>
+<dd><EFBFBD>f<EFBFBD>[<5B>^<5E><><EFBFBD>n<EFBFBD><6E><EFBFBD><EFBFBD><EFBFBD>[<5B>U<EFBFBD><55><EFBFBD>`<60>֐<EFBFBD><D690>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B<EFBFBD><42><EFBFBD>̊֐<CC8A><D690>̎d<CC8E>l<EFBFBD>̓T<CD83><54><EFBFBD>v<EFBFBD><76><EFBFBD><EFBFBD><EFBFBD>Q<EFBFBD>Ƃ<EFBFBD><C682>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>ByteToRead</dt>
+<dd><EFBFBD>]<5D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD><67>(0<>`UINT<4E>̍ő<CC8D><C591>l)<29><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>ByteRead</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>ۂɓ]<5D><><EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>i<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>ϐ<EFBFBD><CF90><EFBFBD><EFBFBD>w<EFBFBD><77><EFBFBD>|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_DENIED</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>ǂݍ<EFBFBD><EFBFBD>݃<EFBFBD><EFBFBD>[<5B>h<EFBFBD>ŊJ<C58A><4A><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǂݍ<C782><DD8D><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>B</dd>
+<dt>FR_DISK_ERR</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>G<EFBFBD><EFBFBD><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_INT_ERR</dt>
+<dd><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD><EFBFBD>FAT<EFBFBD>\<5C><><EFBFBD>܂<EFBFBD><DC82>͓<EFBFBD><CD93><EFBFBD><EFBFBD>G<EFBFBD><47><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_NOT_READY</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>ȂǁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD>\<5C><><EFBFBD>ԁB</dd>
+<dt>FR_INVALID_OBJECT</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ȃt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̃f<CC83>[<5B>^<5E><><EFBFBD>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40>ɓǂݏo<DD8F><6F><EFBFBD><EFBFBD><EFBFBD>ɑ<EFBFBD><C991>M<EFBFBD>X<EFBFBD>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD>ɒ<EFBFBD><C992>ړ]<5D><><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B<EFBFBD>A<EFBFBD>v<EFBFBD><76><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ńf<C583>[<5B>^<5E>E<EFBFBD>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40><><EFBFBD>K<EFBFBD>v<EFBFBD>Ƃ<EFBFBD><C682>Ȃ<EFBFBD><C882>̂ŁA<C581><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̌<EFBFBD><CC8C><EFBFBD><EFBFBD>ꂽ<EFBFBD>‹<EFBFBD><C28B>ŗL<C597><4C><EFBFBD>ł<EFBFBD><C582>B<EFBFBD>]<5D><><EFBFBD>J<EFBFBD>n<EFBFBD>ʒu<CA92>́A<CD81><41><EFBFBD>݂̃t<CC83>@<40>C<EFBFBD><43>R/W<>|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD>ɂȂ<C982><C882>܂<EFBFBD><DC82>B<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43>R/W<>|<7C>C<EFBFBD><43><EFBFBD>^<5E>͓]<5D><><EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>i<EFBFBD>݂܂<DD82><DC82>B<EFBFBD>w<EFBFBD>肳<EFBFBD>ꂽ<EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD><67><EFBFBD>̓]<5D><><EFBFBD><EFBFBD><EFBFBD>Ƀt<C983>@<40>C<EFBFBD><43><EFBFBD>̏I<CC8F>[<5B>ɒB<C992><42><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>⑗<EFBFBD>M<EFBFBD>X<EFBFBD>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>r<EFBFBD>W<EFBFBD>[<5B>ɂȂ<C982><C882><EFBFBD><EFBFBD>ꍇ<EFBFBD>A<tt>*ByteFwd</tt><EFBFBD><EFBFBD><tt>ByteToFwd</tt><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Ή<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><tt>_USE_FORWARD == 1</tt><EFBFBD>ŁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><tt>_FS_TINY == 1</tt><EFBFBD>̂Ƃ<EFBFBD><EFBFBD>Ɏg<EFBFBD>p<EFBFBD>”\<5C>ł<EFBFBD><C582>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>g<EFBFBD>p<EFBFBD><EFBFBD><EFBFBD>i<EFBFBD>I<EFBFBD>[<5B>f<EFBFBD>B<EFBFBD>I<EFBFBD>Đ<EFBFBD><C490>j</h4>
+<pre>
+/*-----------------------------------------------------------------------*/
+/* f_forward<72>֐<EFBFBD><D690><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă΂<C482><CE82><EFBFBD><EFBFBD>f<EFBFBD>[<5B>^<5E><><EFBFBD>M<EFBFBD>֐<EFBFBD><D690>̗<EFBFBD>                           */
+/*-----------------------------------------------------------------------*/
+
+UINT out_stream (   /* <20>߂<EFBFBD><DF82>l: <20>]<5D><><EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD><67><EFBFBD>܂<EFBFBD><DC82>̓X<CD83>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD>̏<EFBFBD><CC8F><EFBFBD> */
+    const BYTE *p,  /* <20>]<5D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>[<5B>^<5E><><EFBFBD>w<EFBFBD><77><EFBFBD>|<7C>C<EFBFBD><43><EFBFBD>^ */
+    UINT btf        /* &gt;0: <20>]<5D><><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD><73>(<28>o<EFBFBD>C<EFBFBD>g<EFBFBD><67>). 0: <20>X<EFBFBD>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD>̏<EFBFBD><CC8F>Ԃ𒲂ׂ<F092B282> */
+)
+{
+    UINT cnt = 0;
+
+
+    if (btf == 0) {     /* <20>Z<EFBFBD><5A><EFBFBD>X<EFBFBD>v<EFBFBD><76> */
+        /* <20>X<EFBFBD>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD>̏<EFBFBD><CC8F>Ԃ<EFBFBD><D482>Ԃ<EFBFBD> (0: <20>r<EFBFBD>W<EFBFBD>[, 1: <20><><EFBFBD>f<EFBFBD>B) */
+        /* <20><><EFBFBD>U<EFBFBD>A<EFBFBD><41><EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>Ԃ<EFBFBD><D482><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><41><EFBFBD><EFBFBD><EFBFBD>]<5D><><EFBFBD>v<EFBFBD><76><EFBFBD>ŏ<EFBFBD><C58F>Ȃ<EFBFBD><C882>Ƃ<EFBFBD>1<EFBFBD>o<EFBFBD>C<EFBFBD>g<EFBFBD><67> */
+        /* <20>]<5D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882><EFBFBD> f_forward<72>֐<EFBFBD><D690><EFBFBD> FR_RW_ERROR <20>ƂȂ<C682><C882>B */
+        if (FIFO_READY) cnt = 1;
+    }
+    else {              /* <20>]<5D><><EFBFBD>v<EFBFBD><76> */
+        do {    /* <20>S<EFBFBD>Ẵo<CC83>C<EFBFBD>g<EFBFBD><67><EFBFBD>]<5D><><EFBFBD><EFBFBD><EFBFBD>邩<EFBFBD>A<EFBFBD>X<EFBFBD>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>r<EFBFBD>W<EFBFBD>[<5B>ɂȂ<C982><C882>܂ŌJ<C58C><4A><EFBFBD>Ԃ<EFBFBD> */
+            FIFO_PORT = *p++;
+            cnt++;
+        } while (cnt &lt; btf &amp;&amp; FIFO_READY);
+    }
+
+    return cnt;
+}
+
+
+/*-----------------------------------------------------------------------*/
+/* f_forward<72>֐<EFBFBD><D690>̎g<CC8E>p<EFBFBD><70>                                                 */
+/*-----------------------------------------------------------------------*/
+
+FRESULT play_file (
+    char *fn        /* <20>Đ<EFBFBD><C490><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD>[<5B>f<EFBFBD>B<EFBFBD>I<EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>w<EFBFBD><77><EFBFBD>|<7C>C<EFBFBD><43><EFBFBD>^ */
+)
+{
+    FRESULT rc;
+    FIL fil;
+    UINT dmy;
+
+    /* <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>ǂݏo<DD8F><6F><EFBFBD><EFBFBD><EFBFBD>[<5B>h<EFBFBD>ŊJ<C58A><4A> */
+    rc = f_open(&amp;fil, fn, FA_READ);
+
+    /* <20>S<EFBFBD>Ẵf<CC83>[<5B>^<5E><><EFBFBD>]<5D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>邩<EFBFBD>G<EFBFBD><47><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂ő<DC82><C591><EFBFBD><EFBFBD><EFBFBD> */
+    while (rc == FR_OK &amp;&amp; fil.fptr &lt; fil.fsize) {
+
+        /* <20>ق<EFBFBD><D982>̏<EFBFBD><CC8F><EFBFBD>... */
+
+        /* <20><><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD>܂<EFBFBD><DC82>͗v<CD97><76><EFBFBD>ɉ<EFBFBD><C989><EFBFBD><EFBFBD>ăf<C483>[<5B>^<5E><><EFBFBD>X<EFBFBD>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD>ɑ<EFBFBD><C991>o<EFBFBD><6F><EFBFBD><EFBFBD> */
+        rc = f_forward(&amp;fil, out_stream, 1000, &amp;dmy);
+    }
+
+    return rc;	/* FR_OK: <20><><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><49>, <20>ق<EFBFBD>:<3A>ُ<EFBFBD><D98F>I<EFBFBD><49> */
+}
+</pre>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Q<EFBFBD><EFBFBD></h4>
+<p><tt><a href="open.html">f_open</a>, <a href="gets.html">fgets</a>, <a href="write.html">f_write</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/getfree.html

@@ -0,0 +1,101 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_getfree</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_getfree</h2>
+<p><EFBFBD>_<EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD>̖<EFBFBD><EFBFBD>g<EFBFBD>p<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>^<5E><><EFBFBD>𓾂܂<F093BE82><DC82>B</p>
+<pre>
+FRESULT f_getfree (
+  const XCHAR* <em>Path</em>,       /* <20>Ώۃh<DB83><68><EFBFBD>C<EFBFBD>u<EFBFBD>̃<EFBFBD><CC83>[<5B>g<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67> */
+  DWORD* <em>Clusters</em>,         /* <20>󂫃N<F382AB83><4E><EFBFBD>X<EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD>i<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>ϐ<EFBFBD><CF90>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^ */
+  FATFS** <em>FileSystemObject</em> /* <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>w<EFBFBD><77><EFBFBD>|<7C>C<EFBFBD><43><EFBFBD>^<5E>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^ */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>Path</dt>
+<dd><EFBFBD>Ώۂ̘_<EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>̃<EFBFBD><EFBFBD>[<5B>g<EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><a href="filename.html"><EFBFBD>p<EFBFBD>X<EFBFBD><EFBFBD></a><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><tt>'\0'</tt><EFBFBD>ŏI<EFBFBD><EFBFBD><EFBFBD>镶<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>Clusters</dt>
+<dd><EFBFBD>󂫃N<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD>i<EFBFBD>[<5B><><EFBFBD><EFBFBD><tt>DWORD</tt><EFBFBD>ϐ<EFBFBD><EFBFBD>ւ̃|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>FileSystemObject</dt>
+<dd><EFBFBD>Ώۃh<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>̃t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>w<EFBFBD><77><EFBFBD>|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>Ԃ<EFBFBD><D482><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<dl class="ret">
+<dt>FR_OK (0)</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD>B<tt>*Clusters</tt><EFBFBD>ɋ󂫃N<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD>Ԃ<EFBFBD><D482><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>FR_INVALID_DRIVE</dt>
+<dd><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>ԍ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD>B</dd>
+<dt>FR_NOT_READY</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>ȂǁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD>\<5C><><EFBFBD>ԁB</dd>
+<dt>FR_DISK_ERR</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD>E<EFBFBD>G<EFBFBD><EFBFBD><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_INT_ERR</dt>
+<dd><EFBFBD>s<EFBFBD><EFBFBD><EFBFBD><EFBFBD>FAT<EFBFBD>\<5C><><EFBFBD>܂<EFBFBD><DC82>͓<EFBFBD><CD93><EFBFBD><EFBFBD>G<EFBFBD><47><EFBFBD>[<5B>ɂ<EFBFBD><C982>鎸<EFBFBD>s<EFBFBD>B</dd>
+<dt>FR_NOT_ENABLED</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD>̘_<EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD>Ƀ<EFBFBD><EFBFBD>[<5B>N<EFBFBD>E<EFBFBD>G<EFBFBD><47><EFBFBD>A<EFBFBD><41><EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>Ȃ<EFBFBD><C882>B</dd>
+<dt>FR_NO_FILESYSTEM</dt>
+<dd><EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>ɗL<EFBFBD><EFBFBD><EFBFBD><EFBFBD>FAT<EFBFBD>p<EFBFBD>[<5B>e<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><C282><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><EFBFBD>_<EFBFBD><EFBFBD><EFBFBD>h<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD>̋󂫃N<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD>擾<EFBFBD><E693BE><EFBFBD>܂<EFBFBD><DC82>B<EFBFBD>Ԃ<EFBFBD><D482>ꂽ<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>V<EFBFBD>X<EFBFBD>e<EFBFBD><65><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD><67><tt>csize</tt><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̃Z<CC83>N<EFBFBD>^<5E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD>̂ŁA<C581><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ɏ<EFBFBD><C98E>ۂ̋󂫃T<F382AB83>C<EFBFBD>Y<EFBFBD><59><EFBFBD>v<EFBFBD>Z<EFBFBD>ł<EFBFBD><C582>܂<EFBFBD><DC82>BFAT32<33>{<7B><><EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>ɂ<EFBFBD><C982><EFBFBD><EFBFBD>ẮAFSINFO<46>̏<EFBFBD><CC8F>Ԃɂ<D482><C982><EFBFBD><EFBFBD>Ă͕s<CD95><73><EFBFBD>m<EFBFBD>Ȓl<C892><6C><EFBFBD>Ԃ<EFBFBD><D482><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><41><EFBFBD><EFBFBD><EFBFBD>Ɏ<EFBFBD><C98E>Ԃ<EFBFBD><D482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>肷<EFBFBD><E882B7><EFBFBD>”\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Ή<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><tt>_FS_READONLY == 0</tt><EFBFBD>ŁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><tt>_FS_MINIMIZE == 0</tt><EFBFBD>̂Ƃ<EFBFBD><EFBFBD>g<EFBFBD>p<EFBFBD>”\<5C>ł<EFBFBD><C582>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>g<EFBFBD>p<EFBFBD><EFBFBD></h4>
+<pre>
+    FATFS *fs;
+    DWORD fre_clust, fre_sect, tot_sect;
+
+
+    /* Get drive information and free clusters */
+    res = f_getfree("/", &amp;fre_clust, &amp;fs);
+    if (res) die(res);
+
+    /* Get total sectors and free sectors */
+    tot_sect = (fs->max_clust - 2) * fs->csize;
+    fre_sect = fre_clust * fs->csize;
+
+    /* Print free space in unit of KB (assuming 512B/sector) */
+    printf("%lu KB total drive space.\n"
+           "%lu KB available.\n",
+           fre_sect / 2, tot_sect / 2);
+</pre>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Q<EFBFBD><EFBFBD></h4>
+<tt><a href="sfatfs.html">FATFS</a></tt>
+</div>
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>

Micropendous/libs/FreeRTOS/Demo/Common/FileSystem/FatFs-0.7e/doc/ja/gets.html

@@ -0,0 +1,63 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html lang="ja">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
+<meta http-equiv="Content-Style-Type" content="text/css">
+<link rel="up" title="FatFs" href="../00index_j.html">
+<link rel="stylesheet" href="../css_j.css" type="text/css" media="screen" title="ELM Default">
+<title>FatFs - f_gets</title>
+</head>
+
+<body>
+
+<div class="para">
+<h2>f_gets</h2>
+<p><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>當<EFBFBD><E795B6><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǂݏo<DD8F><6F><EFBFBD>܂<EFBFBD><DC82>B</p>
+<pre>
+char* f_gets (
+  char* <em>Str</em>,        /* <20>o<EFBFBD>b<EFBFBD>t<EFBFBD>@ */
+  int <em>Size</em>,         /* <20>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40>̃T<CC83>C<EFBFBD>Y */
+  FIL* <em>FileObject</em>   /* <20>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g */
+);
+</pre>
+</div>
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<dl class="par">
+<dt>Str</dt>
+<dd><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǂݏo<EFBFBD><EFBFBD><EFBFBD>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40><><EFBFBD>w<EFBFBD><77><EFBFBD>|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>Size</dt>
+<dd><EFBFBD>o<EFBFBD>b<EFBFBD>t<EFBFBD>@<40>̃T<CC83>C<EFBFBD>Y<EFBFBD><59><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+<dt>FileObject</dt>
+<dd><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>I<EFBFBD>u<EFBFBD>W<EFBFBD>F<EFBFBD>N<EFBFBD>g<EFBFBD>\<5C><><EFBFBD>̂ւ̃|<7C>C<EFBFBD><43><EFBFBD>^<5E><><EFBFBD>w<EFBFBD>肵<EFBFBD>܂<EFBFBD><DC82>B</dd>
+</dl>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>߂<EFBFBD><EFBFBD>l</h4>
+<p><EFBFBD>֐<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><tt>Str</tt><EFBFBD><EFBFBD><EFBFBD>Ԃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><EFBFBD><EFBFBD><EFBFBD>̊֐<EFBFBD><EFBFBD><EFBFBD><a href="read.html">f_read()</a><EFBFBD>̃<EFBFBD><EFBFBD>b<EFBFBD>p<EFBFBD>[<5B>֐<EFBFBD><D690>ł<EFBFBD><C582>B<EFBFBD>ǂݏo<DD8F><6F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>́A<CD81>ŏ<EFBFBD><C58F><EFBFBD><tt>'\n'</tt><EFBFBD><EFBFBD><EFBFBD>ǂݍ<EFBFBD><EFBFBD>ނ<EFBFBD><EFBFBD>A<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>I<EFBFBD>[<5B>ɒB<C992><42><EFBFBD>邩<EFBFBD>A<tt>Size - 1</tt><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǂݏo<EFBFBD><EFBFBD><EFBFBD>܂ő<EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B<EFBFBD>ǂݍ<EFBFBD><EFBFBD>܂ꂽ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̏I<EFBFBD>[<5B>ɂ<EFBFBD><tt>'\0'</tt><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>Ƀt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>I<EFBFBD>[<5B><>1<EFBFBD><31><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǂݍ<C782><DD8D>܂<EFBFBD><DC82>Ȃ<EFBFBD><C882><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682>A<EFBFBD>܂<EFBFBD><DC82>͉<EFBFBD><CD89>炩<EFBFBD>̃G<CC83><47><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><tt>NULL</tt><EFBFBD><EFBFBD><EFBFBD>Ԃ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>I<EFBFBD>[<5B><><EFBFBD>G<EFBFBD><47><EFBFBD>[<5B><><EFBFBD><EFBFBD><tt>f_eof()</tt>,<tt>f_error()</tt><EFBFBD>}<7D>N<EFBFBD><4E><EFBFBD>Œ<EFBFBD><C592>ׂ<EFBFBD><D782><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Ή<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></h4>
+<p><tt>_USE_STRFUNC</tt><EFBFBD><EFBFBD> 1<>܂<EFBFBD><DC82><EFBFBD> 2<>̂Ƃ<CC82><C682>g<EFBFBD>p<EFBFBD>”\<5C>ł<EFBFBD><C582>B2<42>̂Ƃ<CC82><C682>́A<CD81>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>Ɋ܂܂<DC82><DC82><EFBFBD><tt>'\r'</tt><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>菜<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ăo<EFBFBD>b<EFBFBD>t<EFBFBD>@<40>ɓǂݍ<C782><DD8D>܂<EFBFBD><DC82>܂<EFBFBD><DC82>B</p>
+</div>
+
+
+<div class="para">
+<h4><EFBFBD>Q<EFBFBD><EFBFBD></h4>
+<p><tt><a href="open.html">f_open</a>, <a href="read.html">f_read</a>, <a href="putc.html">f_putc</a>, <a href="puts.html">f_puts</a>, <a href="printf.html">f_printf</a>, <a href="close.html">f_close</a>, <a href="sfile.html">FIL</a></tt></p>
+</div>
+
+<p class="foot"><a href="../00index_j.html"><EFBFBD>߂<EFBFBD></a></p>
+</body>
+</html>