Dominik Sliwa
6d866df43d
PoE and clean-up
...
- Moved PoE to a seperate sheet and finished design
- Started using Config field for Variants and DNP flag
- Fix-ups
- Added Wurth 749119550 and TI TPS23734 to the symbol library
- Changed RTC from PCF8563 to PCF85063
Signed-off-by: Dominik Sliwa <dominik@sliwa.io >
2021-01-24 13:55:45 +01:00
Stefan Agner
9ebe0ddccc
Add Bivar SLP3-150-100-F light pipe
2021-01-19 17:03:39 +01:00
Dominik Sliwa
718cc2ad0c
-Connected remaining nets
...
-CM4 symbol fixups
-Used single 6x OE buffer chip instead of 4x single
-Added PWM FAN
Signed-off-by: Dominik Sliwa <dominik@sliwa.io >
2021-01-18 20:38:35 +01:00
Stefan Agner
93b1df3e72
Wire up MGM210P Zigbee radio
2021-01-17 19:35:44 +01:00
Stefan Agner
272eedbb65
Add UART for Zigbee and wire up control signals
2021-01-17 14:16:17 +01:00
Stefan Agner
80337813bf
Wired up SD card
2021-01-17 13:59:37 +01:00
Dominik Sliwa
0851294873
LightBlue.kicad_sym: add SD_DETECT to CM4 symbol
...
Signed-off-by: Dominik Sliwa <dominik@sliwa.io >
2021-01-17 13:54:12 +01:00
Dominik Sliwa
7cefabc116
Changes
...
-Added sdcard sheet and SD bus
-changed main i2c bus
-added 1.8V and 3.3V connection to CM4
-removed clk32 from led driver
-fixed PCM interface Data pin
Signed-off-by: Dominik Sliwa <dominik@sliwa.io >
2021-01-17 11:41:05 +01:00
Dominik Sliwa
5b61a085c4
setup gitattibutes
...
Signed-off-by: Dominik Sliwa <dominik@sliwa.io >
2021-01-17 11:02:12 +01:00
Stefan Agner
3811bc25d3
Replace LP5562 with LP5569 for more RGB LED support
...
The package is also larger and easier to assemble.
2021-01-16 23:51:15 +01:00
Stefan Agner
299ff5a925
Add LP5569 Symbol
2021-01-16 22:49:52 +01:00
Dominik Sliwa
64c4bfad35
Changes:
...
-Added AP64501SP-13 library symbol
-Initial power supplies schematics
-Increased capacitance for PCIe socket
-Connections between sheets
Signed-off-by: Dominik Sliwa <dominik@sliwa.io >
2021-01-16 22:24:22 +01:00
Dominik Sliwa
a2deb0b407
USB.kicad_sch: Fix hub DFP polarity
...
Signed-off-by: Dominik Sliwa <dominik@sliwa.io >
2021-01-16 19:49:36 +01:00
Dominik Sliwa
ad4cc7b761
Multiple changes in schematic & projects:
...
-Added net classes for controlled impedance traces
-Added power hierarchical sheet
-Initial USB subsystem schematic
-Added multiple bus definitions (usb, pcie, i2c etc.)
-Fixed busses use
-Added LDO for audio analog rails
Signed-off-by: Dominik Sliwa <dominik@sliwa.io >
2021-01-16 19:45:50 +01:00
Stefan Agner
c769e32923
Wire up TI PCM5121 audio connect
2021-01-16 17:40:09 +01:00
Stefan Agner
2a58cdd3a6
Add sheet for front/RTC, add buttons, LEDs and a RGB LED
2021-01-16 02:17:33 +01:00
Stefan Agner
a8989bbc11
Wire Ethernet
2021-01-14 23:56:05 +01:00
Stefan Agner
c4f12400dc
Connect HDMI plug
2021-01-14 20:35:49 +01:00
Stefan Agner
15bfa478ed
Wire up PCIe/M.2 connector
2021-01-14 18:05:30 +01:00
Stefan Agner
c1077c7e1e
Add PCIe M.2 support
2021-01-14 17:49:44 +01:00
Stefan Agner
a7690180a2
Add Ethernet plug symbol and footprint
2021-01-14 00:35:00 +01:00
Stefan Agner
6925cd5c72
Add sheet for audio
2021-01-13 17:05:08 +01:00
Stefan Agner
5340feaf38
Add Silicon Labs MGM210P symbol and footprint
2021-01-13 16:07:28 +01:00
Stefan Agner
2293d49b73
Add Molex 2086588131 HDMI connector
2021-01-13 01:25:13 +01:00
Stefan Agner
3a7a2c7236
Add USB2422 2-Port Hub and footprint
2021-01-12 23:55:40 +01:00
Stefan Agner
0fe13d846c
Add symbols to schematics, add Symbol for stacked USB 2.0 connector
2021-01-12 23:28:07 +01:00
Stefan Agner
74e3c29152
Initial commit
...
Project creation, imported Compute Module 4 symbol and footprint from
Gitlab merge requests:
https://gitlab.com/kicad/libraries/kicad-symbols/-/merge_requests/3158
https://gitlab.com/kicad/libraries/kicad-footprints/-/merge_requests/2562
2021-01-12 20:03:39 +01:00
