Merge pull request #93 from davidgiven/hex

Add precompiled firmware
Add documentation for using the precompiled firmware.
2025-10-31 11:17:01 -07:00 · 2019-08-15 22:26:50 +02:00 · 2019-08-15 22:19:30 +02:00 · 2019-08-15 21:52:11 +02:00 · 2019-08-15 20:46:02 +02:00 · 2019-08-15 20:30:07 +02:00
105 changed files with 6485 additions and 591 deletions
--- a/.appveyor.yml
+++ b/.appveyor.yml
@@ -15,7 +15,7 @@ install:

 build_script:
  - make
-  - zip -9 fluxengine.zip fluxengine.exe brother120tool.exe cwftoflux.exe
+  - zip -9 fluxengine.zip fluxengine.exe brother120tool.exe FluxEngine.cydsn/CortexM3/ARM_GCC_541/Release/FluxEngine.hex

 artifacts:
  - path: fluxengine.zip
--- a/.hgignore
+++ b/.hgignore
@@ -3,6 +3,10 @@ streams
 .*\.flux
 .*\.img
 .*\.raw
+.*\.orig
 .vscode
 remote
+FluxEngine.cydsn/CortexM3
+FluxEngine.cydsn/Generated_Source
+FluxEngine.cydsn/codegentemp

--- a/FluxEngine.cydsn/CortexM3/ARM_GCC_541/Release/FluxEngine.hex
+++ b/FluxEngine.cydsn/CortexM3/ARM_GCC_541/Release/FluxEngine.hex
--- a/FluxEngine.cydsn/FluxEngine.cydwr
+++ b/FluxEngine.cydsn/FluxEngine.cydwr
@@ -28,13 +28,37 @@
        <Data key="sync_with_bus_clk" value="True" />
        <Data key="user_set_domain" value="False" />
      </Group>
+      <Group key="4eef02b9-8ad1-43c4-85f1-b3335faa5fc4">
+        <Data key="check_tolerance" value="True" />
+        <Data key="clock_version" value="v1" />
+        <Data key="derive_type" value="NAMED_DIVIDER" />
+        <Data key="desired_freq" value="0" />
+        <Data key="desired_unit" value="15" />
+        <Data key="divider" value="0" />
+        <Data key="domain" value="DIGITAL" />
+        <Data key="enabled" value="True" />
+        <Data key="minus_accuracy" value="0.25" />
+        <Data key="minus_tolerance" value="5" />
+        <Data key="name" value="Clock_3" />
+        <Data key="named_src_direct_connect" value="True" />
+        <Data key="netlist_name" value="Clock_3" />
+        <Data key="placement" value="AUTO" />
+        <Data key="plus_accuracy" value="0.25" />
+        <Data key="plus_tolerance" value="5" />
+        <Data key="scope" value="LOCAL" />
+        <Data key="src_clk_id" value="75C2148C-3656-4d8a-846D-0CAE99AB6FF7" />
+        <Data key="src_clk_name" value="BUS_CLK" />
+        <Data key="start_on_reset" value="True" />
+        <Data key="sync_with_bus_clk" value="True" />
+        <Data key="user_set_domain" value="False" />
+      </Group>
      <Group key="06c4d5d4-f15f-4b29-a1d0-c24b2e38b1ec">
        <Data key="check_tolerance" value="True" />
        <Data key="clock_version" value="v1" />
        <Data key="derive_type" value="NAMED_FREQ" />
-        <Data key="desired_freq" value="24" />
+        <Data key="desired_freq" value="12" />
        <Data key="desired_unit" value="6" />
-        <Data key="divider" value="1" />
+        <Data key="divider" value="2" />
        <Data key="domain" value="DIGITAL" />
        <Data key="enabled" value="True" />
        <Data key="minus_accuracy" value="0.25" />
@@ -50,7 +74,7 @@
        <Data key="src_clk_name" value="IMO" />
        <Data key="start_on_reset" value="True" />
        <Data key="sync_with_bus_clk" value="True" />
-        <Data key="user_set_domain" value="False" />
+        <Data key="user_set_domain" value="True" />
      </Group>
      <Group key="24cd38f7-f472-4403-837f-86807c8f5333">
        <Data key="check_tolerance" value="True" />
@@ -193,6 +217,54 @@
        <Data key="sync_with_bus_clk" value="True" />
        <Data key="user_set_domain" value="False" />
      </Group>
+      <Group key="75187c05-9501-4450-b306-6ccdd3bb77db">
+        <Data key="check_tolerance" value="True" />
+        <Data key="clock_version" value="v1" />
+        <Data key="derive_type" value="NAMED_DIVIDER" />
+        <Data key="desired_freq" value="0" />
+        <Data key="desired_unit" value="15" />
+        <Data key="divider" value="0" />
+        <Data key="domain" value="DIGITAL" />
+        <Data key="enabled" value="True" />
+        <Data key="minus_accuracy" value="0.25" />
+        <Data key="minus_tolerance" value="5" />
+        <Data key="name" value="Clock_5" />
+        <Data key="named_src_direct_connect" value="True" />
+        <Data key="netlist_name" value="Clock_5" />
+        <Data key="placement" value="AUTO" />
+        <Data key="plus_accuracy" value="0.25" />
+        <Data key="plus_tolerance" value="5" />
+        <Data key="scope" value="LOCAL" />
+        <Data key="src_clk_id" value="75C2148C-3656-4d8a-846D-0CAE99AB6FF7" />
+        <Data key="src_clk_name" value="BUS_CLK" />
+        <Data key="start_on_reset" value="True" />
+        <Data key="sync_with_bus_clk" value="True" />
+        <Data key="user_set_domain" value="False" />
+      </Group>
+      <Group key="b762c287-7f87-4b21-982e-84be01dc5115">
+        <Data key="check_tolerance" value="True" />
+        <Data key="clock_version" value="v1" />
+        <Data key="derive_type" value="NAMED_DIVIDER" />
+        <Data key="desired_freq" value="0" />
+        <Data key="desired_unit" value="15" />
+        <Data key="divider" value="0" />
+        <Data key="domain" value="DIGITAL" />
+        <Data key="enabled" value="True" />
+        <Data key="minus_accuracy" value="0.25" />
+        <Data key="minus_tolerance" value="5" />
+        <Data key="name" value="Clock_2" />
+        <Data key="named_src_direct_connect" value="True" />
+        <Data key="netlist_name" value="Clock_2" />
+        <Data key="placement" value="AUTO" />
+        <Data key="plus_accuracy" value="0.25" />
+        <Data key="plus_tolerance" value="5" />
+        <Data key="scope" value="LOCAL" />
+        <Data key="src_clk_id" value="75C2148C-3656-4d8a-846D-0CAE99AB6FF7" />
+        <Data key="src_clk_name" value="BUS_CLK" />
+        <Data key="start_on_reset" value="True" />
+        <Data key="sync_with_bus_clk" value="True" />
+        <Data key="user_set_domain" value="False" />
+      </Group>
      <Group key="b0162966-0060-4af5-82d1-fcb491ad7619/be0a0e37-ad17-42ca-b5a1-1a654d736358">
        <Data key="check_tolerance" value="True" />
        <Data key="clock_version" value="v1" />
@@ -537,6 +609,7 @@
  <Group key="DWRInstGuidMapping">
    <Group key="Clock">
      <Data key="0b2f9bbb-00ce-4115-a788-ffb9d046a9e5" value="Clock_4" />
+      <Data key="4eef02b9-8ad1-43c4-85f1-b3335faa5fc4" value="Clock_3" />
      <Data key="06c4d5d4-f15f-4b29-a1d0-c24b2e38b1ec" value="CounterClock" />
      <Data key="24cd38f7-f472-4403-837f-86807c8f5333" value="PULSE_CLOCK" />
      <Data key="63ed4137-0b09-4256-8a27-35c9a2653f1a" value="Clock_2" />
@@ -544,6 +617,8 @@
      <Data key="349ffa20-8576-4ac3-9a6f-34ef606de6cf" value="Clock_1" />
      <Data key="6616e828-6611-4893-a674-66c861d79d6c" value="SignalSamplingClock" />
      <Data key="12664fc6-9d70-44b1-8a49-887a292e1b7f" value="Clock_3" />
+      <Data key="75187c05-9501-4450-b306-6ccdd3bb77db" value="Clock_5" />
+      <Data key="b762c287-7f87-4b21-982e-84be01dc5115" value="Clock_2" />
      <Data key="b0162966-0060-4af5-82d1-fcb491ad7619/be0a0e37-ad17-42ca-b5a1-1a654d736358" value="UART_IntClock" />
      <Data key="cb7e877c-9fb4-4fc1-a708-f1e48eb5a68c" value="CounterClock" />
      <Data key="e4a53a4c-40e1-4747-a72a-10193ffdf31c" value="Clock_1" />
@@ -553,6 +628,7 @@
      <Data key="4a398466-709f-4228-9500-96178658e13e" value="RDATA" />
      <Data key="5a3407c1-b434-4438-a7b4-b9dfd2280495" value="MOTEA" />
      <Data key="8d318d8b-cf7b-4b6b-b02c-ab1c5c49d0ba" value="SW1" />
+      <Data key="12e00eac-69b5-4717-85c8-25ef6b224d4c" value="DEBUG_PINS" />
      <Data key="41e2d8ed-5494-4d8c-8ff7-f4f789cece51" value="REDWC" />
      <Data key="264be2d3-9481-494b-8d9c-c1905a45e9cc" value="FDD" />
      <Data key="472f8fdb-f772-44fb-8897-cc690694237b" value="WDATA" />
@@ -561,6 +637,7 @@
      <Data key="1425177d-0d0e-4468-8bcc-e638e5509a9b" value="UartRx" />
      <Data key="a5d987c6-e45b-45b9-ad93-656fab06d720" value="TRK00" />
      <Data key="a93ef5b3-00f4-42c0-8fad-0e275a7e2537" value="MOTEB" />
+      <Data key="b8380fb7-fdb8-449f-bd8d-c4ca96cdf55a" value="DEBUG_PINS" />
      <Data key="bc5d52a1-1b25-4aa0-9ba9-3f81d122772f" value="DEBUG_PINS" />
      <Data key="beca5e2d-f70f-4900-a4db-7eca1ed3126e/8b77a6c4-10a0-4390-971c-672353e2a49c" value="USBFS_Dm" />
      <Data key="beca5e2d-f70f-4900-a4db-7eca1ed3126e/618a72fc-5ddd-4df5-958f-a3d55102db42" value="USBFS_Dp" />
@@ -571,7 +648,7 @@
      <Data key="e51063a9-4fad-40c7-a06b-7cc4b137dc18" value="DSKCHG" />
      <Data key="ea7ee228-8b3f-426c-8bb8-cd7a81937769" value="DIR" />
      <Data key="ed092b9b-d398-4703-be89-cebf998501f6" value="UartTx" />
-      <Data key="fbd1f839-40f9-498e-a48b-5f3048ea5c3d/52f31aa9-2f0a-497d-9a1f-1424095e13e6" value="SW_Tx_UART_1_tx" />
+      <Data key="fbd1f839-40f9-498e-a48b-5f3048ea5c3d/52f31aa9-2f0a-497d-9a1f-1424095e13e6" value="UART_tx" />
      <Data key="fede1767-f3fd-4021-b3d7-8f9d88f36f9b" value="DRVSA" />
      <Data key="fff78075-035e-43d7-8577-bc5be4d21926" value="WGATE" />
    </Group>
@@ -3675,6 +3752,20 @@
        <Data key="Port Format" value="2,2" />
      </Group>
    </Group>
+    <Group key="12e00eac-69b5-4717-85c8-25ef6b224d4c">
+      <Group key="0">
+        <Data key="Port Format" value="2,2" />
+      </Group>
+      <Group key="1">
+        <Data key="Port Format" value="2,3" />
+      </Group>
+      <Group key="2">
+        <Data key="Port Format" value="2,4" />
+      </Group>
+      <Group key="3">
+        <Data key="Port Format" value="2,0" />
+      </Group>
+    </Group>
    <Group key="41e2d8ed-5494-4d8c-8ff7-f4f789cece51">
      <Group key="0">
        <Data key="Port Format" value="2,7" />
@@ -3757,6 +3848,17 @@
        <Data key="Port Format" value="12,1" />
      </Group>
    </Group>
+    <Group key="b8380fb7-fdb8-449f-bd8d-c4ca96cdf55a">
+      <Group key="0">
+        <Data key="Port Format" value="2,5" />
+      </Group>
+      <Group key="1">
+        <Data key="Port Format" value="2,4" />
+      </Group>
+      <Group key="2">
+        <Data key="Port Format" value="2,3" />
+      </Group>
+    </Group>
    <Group key="bc5d52a1-1b25-4aa0-9ba9-3f81d122772f">
      <Group key="0">
        <Data key="Port Format" value="0,5" />
@@ -3812,7 +3914,7 @@
    </Group>
    <Group key="fbd1f839-40f9-498e-a48b-5f3048ea5c3d/52f31aa9-2f0a-497d-9a1f-1424095e13e6">
      <Group key="0">
-        <Data key="Port Format" value="2,0" />
+        <Data key="Port Format" value="2,5" />
      </Group>
    </Group>
    <Group key="fede1767-f3fd-4021-b3d7-8f9d88f36f9b">
@@ -3840,7 +3942,7 @@
    <Data key="CYDEV_ECC_ENABLE" value="False" />
    <Data key="CYDEV_HEAP_SIZE" value="0x80" />
    <Data key="CYDEV_INSTRUCT_CACHE_ENABLED" value="True" />
-    <Data key="CYDEV_PROTECTION_ENABLE" value="False" />
+    <Data key="CYDEV_PROTECTION_ENABLE" value="True" />
    <Data key="CYDEV_STACK_SIZE" value="0x0800" />
    <Data key="CYDEV_TEMPERATURE" value="0C - 85/125C" />
    <Data key="CYDEV_TRACE_ENABLED" value="False" />
--- a/FluxEngine.cydsn/FluxEngine.cyprj
+++ b/FluxEngine.cydsn/FluxEngine.cyprj
@@ -2310,13 +2310,13 @@
 <CyGuid_ebc4f06d-207f-49c2-a540-72acf4adabc0 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFolderSerialize" version="3">
 <CyGuid_2f73275c-45bf-46ba-b3b1-00a2fe0c8dd8 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtBaseContainerSerialize" version="1">
 <CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItemSerialize" version="2" name="DEBUG_PINS" persistent="">
-<Hidden v="True" />
+<Hidden v="False" />
 </CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
 <CyGuid_0820c2e7-528d-4137-9a08-97257b946089 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItemListSerialize" version="2">
 <dependencies>
 <CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFileSerialize" version="3" xml_contents_version="1">
 <CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItemSerialize" version="2" name="DEBUG_PINS_aliases.h" persistent="Generated_Source\PSoC5\DEBUG_PINS_aliases.h">
-<Hidden v="True" />
+<Hidden v="False" />
 </CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
 <build_action v="HEADER;;;;" />
 <PropertyDeltas />
@@ -3249,6 +3249,39 @@
 </CyGuid_2f73275c-45bf-46ba-b3b1-00a2fe0c8dd8>
 <filters />
 </CyGuid_ebc4f06d-207f-49c2-a540-72acf4adabc0>
+<CyGuid_ebc4f06d-207f-49c2-a540-72acf4adabc0 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFolderSerialize" version="3">
+<CyGuid_2f73275c-45bf-46ba-b3b1-00a2fe0c8dd8 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtBaseContainerSerialize" version="1">
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItemSerialize" version="2" name="CAPTURE_CONTROL" persistent="">
+<Hidden v="False" />
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
+<CyGuid_0820c2e7-528d-4137-9a08-97257b946089 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItemListSerialize" version="2">
+<dependencies>
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFileSerialize" version="3" xml_contents_version="1">
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItemSerialize" version="2" name="CAPTURE_CONTROL.h" persistent="Generated_Source\PSoC5\CAPTURE_CONTROL.h">
+<Hidden v="False" />
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
+<build_action v="HEADER;;;;" />
+<PropertyDeltas />
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFileSerialize" version="3" xml_contents_version="1">
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItemSerialize" version="2" name="CAPTURE_CONTROL.c" persistent="Generated_Source\PSoC5\CAPTURE_CONTROL.c">
+<Hidden v="False" />
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
+<build_action v="SOURCE_C;CortexM3;;;" />
+<PropertyDeltas />
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFileSerialize" version="3" xml_contents_version="1">
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItemSerialize" version="2" name="CAPTURE_CONTROL_PM.c" persistent="Generated_Source\PSoC5\CAPTURE_CONTROL_PM.c">
+<Hidden v="False" />
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
+<build_action v="SOURCE_C;CortexM3;;;" />
+<PropertyDeltas />
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
+</dependencies>
+</CyGuid_0820c2e7-528d-4137-9a08-97257b946089>
+</CyGuid_2f73275c-45bf-46ba-b3b1-00a2fe0c8dd8>
+<filters />
+</CyGuid_ebc4f06d-207f-49c2-a540-72acf4adabc0>
 </dependencies>
 </CyGuid_0820c2e7-528d-4137-9a08-97257b946089>
 </CyGuid_2f73275c-45bf-46ba-b3b1-00a2fe0c8dd8>
@@ -3667,6 +3700,6 @@
 </ignored_deps>
 </CyGuid_495451fe-d201-4d01-b22d-5d3f5609ac37>
 <boot_component v="" />
-<current_generation v="52" />
+<current_generation v="68" />
 </CyGuid_fec8f9e8-2365-4bdb-96d3-a4380222e01b>
 </CyXmlSerializer>
--- a/FluxEngine.cydsn/TopDesign/TopDesign.cysch
+++ b/FluxEngine.cydsn/TopDesign/TopDesign.cysch
--- a/FluxEngine.cydsn/UdbSampler/UdbSampler.cyudb
+++ b/FluxEngine.cydsn/UdbSampler/UdbSampler.cyudb
--- a/FluxEngine.cydsn/main.c
+++ b/FluxEngine.cydsn/main.c
@@ -306,6 +306,7 @@ static void cmd_read(struct read_frame* f)
    dma_underrun = false;
    int count = 0;
    SAMPLER_CONTROL_Write(0); /* !reset */
+    CAPTURE_CONTROL_Write(1);
    CyDmaChSetInitialTd(dma_channel, td[dma_writing_to_td]);
    CyDmaClearPendingDrq(dma_channel);
    CyDmaChEnable(dma_channel, 1);
@@ -364,7 +365,8 @@ static void cmd_read(struct read_frame* f)
        }
        dma_reading_from_td = NEXT_BUFFER(dma_reading_from_td);
    }
-abort:
+abort:;
+    CAPTURE_CONTROL_Write(0);
    CyDmaChSetRequest(dma_channel, CY_DMA_CPU_TERM_CHAIN);
    while (CyDmaChGetRequest(dma_channel))
        ;
--- a/2
+++ b/2
@@ -22,7 +22,7 @@ export LIBS = $(shell pkg-config --libs $(PACKAGES))
 export EXTENSION =
 endif

-CFLAGS += -Ilib -Idep/fmt
+CFLAGS += -Ilib -Idep/fmt -Iarch

 export OBJDIR = .obj

--- a/README.md
+++ b/README.md
@@ -89,7 +89,7 @@ people who've had it work).
 | [Brother 120kB](doc/disk-brother.md)     |  🦄   |        |                                     |
 | [Brother 240kB](doc/disk-brother.md)     |  🦄   |   🦄   |                                     |
 | [Brother FB-100](doc/disk-fb100.md)      |  🦖   |        | Tandy Model 100, Husky Hunter, knitting machines |
-| [Macintosh 800kB](doc/disk-macintosh.md) |  🦖   |        | and probably the 400kB too          |
+| [Macintosh 800kB](doc/disk-macintosh.md) |  🦄   |        | and probably the 400kB too          |
 | [TRS-80](doc/disk-trs80.md)              |  🦖   |        | a minor variation of the IBM scheme |
 {: .datatable }

@@ -105,6 +105,7 @@ at least, check the CRC so what data's there is probably good.
 |:-----------------------------------------|:-----:|:------:|-------|
 | [AES Superplus / No Problem](doc/disk-aeslanier.md) |  🦖   | | hard sectors! |
 | [Durango F85](doc/disk-durangof85.md)    |  🦖   |        | 5.25" |
+| [DVK MX](doc/disk-mx.md)                 |  🦖   |        | Soviet PDP-11 clone |
 | [Victor 9000](doc/disk-victor9k.md)      |  🦖   |        | 8-inch        |
 | [Zilog MCZ](doc/disk-zilogmcz.md)        |  🦖   |        | 8-inch _and_ hard sectors |
 {: .datatable }
@@ -189,7 +190,7 @@ Jonathan Müller (`foonathan <https://github.com/foonathan>`) with
 contributions from many other people. It is licensed under the terms of the
 BSD license. Please see the contents of the directory for the full text.

-As an exception, `dep/fnmatchemu` contains parts of the OpenBSD C library
+As an exception, `dep/emu` contains parts of the OpenBSD C library
 code, Todd Miller and William A. Rowe (and probably others). It is licensed
 under the terms of the 3-clause BSD license. Please see the contents of the
 directory for the full text. It's been lightly modified by me.
--- a/arch/aeslanier/aeslanier.h
+++ b/arch/aeslanier/aeslanier.h
--- a/arch/aeslanier/decoder.cc
+++ b/arch/aeslanier/decoder.cc
--- a/arch/amiga/amiga.h
+++ b/arch/amiga/amiga.h
--- a/arch/amiga/decoder.cc
+++ b/arch/amiga/decoder.cc
@@ -92,6 +92,8 @@ void AmigaDecoder::decodeSectorRecord()

    uint32_t wanteddatachecksum = deinterleave(ptr, 4).reader().read_be32();
    uint32_t gotdatachecksum = checksum(rawbytes.slice(62, 1024));
-    _sector->data = deinterleave(ptr, 512);
+
+    _sector->data.clear();
+    _sector->data.writer().append(deinterleave(ptr, 512)).append(recoveryinfo);
    _sector->status = (gotdatachecksum == wanteddatachecksum) ? Sector::OK : Sector::BAD_CHECKSUM;
 }
--- a/arch/apple2/apple2.h
+++ b/arch/apple2/apple2.h
--- a/arch/apple2/data_gcr.h
+++ b/arch/apple2/data_gcr.h
--- a/arch/apple2/decoder.cc
+++ b/arch/apple2/decoder.cc
--- a/arch/brother/brother.h
+++ b/arch/brother/brother.h
@@ -9,6 +9,9 @@
 #define BROTHER_DATA_RECORD_CHECKSUM     3
 #define BROTHER_DATA_RECORD_ENCODED_SIZE 415

+#define BROTHER_TRACKS_PER_DISK          78
+#define BROTHER_SECTORS_PER_TRACK        12
+
 class Sector;
 class Fluxmap;

@@ -22,9 +25,15 @@ public:
    void decodeDataRecord();
 };

-extern void writeBrotherSectorHeader(std::vector<bool>& bits, unsigned& cursor,
-		int track, int sector);
-extern void writeBrotherSectorData(std::vector<bool>& bits, unsigned& cursor,
-		const Bytes& data);
+class BrotherEncoder : public AbstractEncoder
+{
+public:
+	virtual ~BrotherEncoder() {}
+
+public:
+    std::unique_ptr<Fluxmap> encode(int physicalTrack, int physicalSide, const SectorSet& allSectors);
+};
+
+extern FlagGroup brotherEncoderFlags;

 #endif
--- a/arch/brother/brotherdecode.h
+++ b/arch/brother/brotherdecode.h
--- a/arch/brother/data_gcr.h
+++ b/arch/brother/data_gcr.h
--- a/arch/brother/decoder.cc
+++ b/arch/brother/decoder.cc
@@ -3,6 +3,7 @@
 #include "fluxmap.h"
 #include "decoders/fluxmapreader.h"
 #include "decoders/decoders.h"
+#include "encoders/encoders.h"
 #include "record.h"
 #include "brother.h"
 #include "sector.h"
--- a/arch/brother/encoder.cc
+++ b/arch/brother/encoder.cc
@@ -0,0 +1,167 @@
+#include "globals.h"
+#include "record.h"
+#include "decoders/decoders.h"
+#include "encoders/encoders.h"
+#include "brother.h"
+#include "crc.h"
+#include "sectorset.h"
+#include "writer.h"
+
+FlagGroup brotherEncoderFlags;
+
+static DoubleFlag clockRateUs(
+	{ "--clock-rate" },
+	"Encoded data clock rate (microseconds).",
+	3.83);
+
+static DoubleFlag postIndexGapMs(
+	{ "--post-index-gap" },
+	"Post-index gap before first sector header (milliseconds).",
+	1.0);
+
+static DoubleFlag sectorSpacingMs(
+	{ "--sector-spacing" },
+	"Time between successive sector headers (milliseconds).",
+	16.2);
+
+static DoubleFlag postHeaderSpacingMs(
+	{ "--post-header-spacing" },
+	"Time between a sector's header and data records (milliseconds).",
+	0.69);
+
+static StringFlag sectorSkew(
+	{ "--sector-skew" },
+	"Order in which to write sectors.",
+	"05a3816b4927");
+
+static int encode_header_gcr(uint16_t word)
+{
+	switch (word)
+	{
+		#define GCR_ENTRY(gcr, data) \
+			case data: return gcr;
+		#include "header_gcr.h"
+		#undef GCR_ENTRY
+	}                       
+	return -1;             
+};
+
+static int encode_data_gcr(uint8_t data)
+{
+	switch (data)
+	{
+		#define GCR_ENTRY(gcr, data) \
+			case data: return gcr;
+		#include "data_gcr.h"
+		#undef GCR_ENTRY
+	}                       
+	return -1;             
+};
+
+static void write_bits(std::vector<bool>& bits, unsigned& cursor, uint32_t data, int width)
+{
+	cursor += width;
+	for (int i=0; i<width; i++)
+	{
+		unsigned pos = cursor - i - 1;
+		if (pos < bits.size())
+			bits[pos] = data & 1;
+		data >>= 1;
+	}
+}
+
+static void write_sector_header(std::vector<bool>& bits, unsigned& cursor,
+		int track, int sector)
+{
+	write_bits(bits, cursor, 0xffffffff, 31);
+	write_bits(bits, cursor, BROTHER_SECTOR_RECORD, 32);
+	write_bits(bits, cursor, encode_header_gcr(track), 16);
+	write_bits(bits, cursor, encode_header_gcr(sector), 16);
+	write_bits(bits, cursor, encode_header_gcr(0x2f), 16);
+}
+
+static void write_sector_data(std::vector<bool>& bits, unsigned& cursor, const Bytes& data)
+{
+	write_bits(bits, cursor, 0xffffffff, 32);
+	write_bits(bits, cursor, BROTHER_DATA_RECORD, 32);
+
+	uint16_t fifo = 0;
+	int width = 0;
+
+	if (data.size() != BROTHER_DATA_RECORD_PAYLOAD)
+		Error() << "unsupported sector size";
+
+	auto write_byte = [&](uint8_t byte)
+	{
+		fifo |= (byte << (8 - width));
+		width += 8;
+
+		while (width >= 5)
+		{
+			uint8_t quintet = fifo >> 11;
+			fifo <<= 5;
+			width -= 5;
+
+			write_bits(bits, cursor, encode_data_gcr(quintet), 8);
+		}
+	};
+
+	for (uint8_t byte : data)
+		write_byte(byte);
+
+	uint32_t realCrc = crcbrother(data);
+	write_byte(realCrc>>16);
+	write_byte(realCrc>>8);
+	write_byte(realCrc);
+	write_byte(0x58); /* magic */
+    write_byte(0xd4);
+    while (width != 0)
+        write_byte(0);
+}
+
+static int charToInt(char c)
+{
+	if (isdigit(c))
+		return c - '0';
+	return 10 + tolower(c) - 'a';
+}
+
+std::unique_ptr<Fluxmap> BrotherEncoder::encode(
+	int physicalTrack, int physicalSide, const SectorSet& allSectors)
+{
+	if ((physicalTrack < 0) || (physicalTrack >= BROTHER_TRACKS_PER_DISK)
+        || (physicalSide != 0))
+		return std::unique_ptr<Fluxmap>();
+
+	int bitsPerRevolution = 200000.0 / clockRateUs;
+	const std::string& skew = sectorSkew.get();
+	std::vector<bool> bits(bitsPerRevolution);
+	unsigned cursor = 0;
+
+	for (int sectorCount=0; sectorCount<BROTHER_SECTORS_PER_TRACK; sectorCount++)
+	{
+		int sectorId = charToInt(skew.at(sectorCount));
+		double headerMs = postIndexGapMs + sectorCount*sectorSpacingMs;
+		unsigned headerCursor = headerMs*1e3 / clockRateUs;
+		double dataMs = headerMs + postHeaderSpacingMs;
+		unsigned dataCursor = dataMs*1e3 / clockRateUs;
+
+		const auto& sectorData = allSectors.get(physicalTrack, 0, sectorId);
+
+		fillBitmapTo(bits, cursor, headerCursor, { true, false });
+		write_sector_header(bits, cursor, physicalTrack, sectorId);
+		fillBitmapTo(bits, cursor, dataCursor, { true, false });
+		write_sector_data(bits, cursor, sectorData->data);
+	}
+
+	if (cursor > bits.size())
+		Error() << "track data overrun";
+	fillBitmapTo(bits, cursor, bits.size(), { true, false });
+
+	// The pre-index gap is not normally reported.
+	// std::cerr << "pre-index gap " << 200.0 - (double)cursor*clockRateUs/1e3 << std::endl;
+	
+	std::unique_ptr<Fluxmap> fluxmap(new Fluxmap);
+	fluxmap->appendBits(bits, clockRateUs*1e3);
+	return fluxmap;
+}
--- a/arch/brother/header_gcr.h
+++ b/arch/brother/header_gcr.h
--- a/arch/c64/c64.h
+++ b/arch/c64/c64.h
--- a/arch/c64/data_gcr.h
+++ b/arch/c64/data_gcr.h
--- a/arch/c64/decoder.cc
+++ b/arch/c64/decoder.cc
--- a/arch/f85/data_gcr.h
+++ b/arch/f85/data_gcr.h
--- a/arch/f85/decoder.cc
+++ b/arch/f85/decoder.cc
--- a/arch/f85/f85.h
+++ b/arch/f85/f85.h
--- a/arch/fb100/decoder.cc
+++ b/arch/fb100/decoder.cc
--- a/arch/fb100/fb100.h
+++ b/arch/fb100/fb100.h
--- a/arch/ibm/decoder.cc
+++ b/arch/ibm/decoder.cc
--- a/arch/ibm/ibm.h
+++ b/arch/ibm/ibm.h
--- a/arch/macintosh/data_gcr.h
+++ b/arch/macintosh/data_gcr.h
--- a/arch/macintosh/decoder.cc
+++ b/arch/macintosh/decoder.cc
@@ -153,6 +153,9 @@ void MacintoshDecoder::decodeSectorRecord()
    uint8_t formatByte = decode_data_gcr(header[3]);
    uint8_t wantedsum = decode_data_gcr(header[4]);

+    if (encodedSector > 11)
+        return;
+
    _sector->logicalTrack = _track->physicalTrack;
    _sector->logicalSide = decode_side(encodedSide);
    _sector->logicalSector = encodedSector;
@@ -177,5 +180,7 @@ void MacintoshDecoder::decodeDataRecord()
        inputbuffer[i] = decode_data_gcr(inputbuffer[i]);
        
    _sector->status = Sector::BAD_CHECKSUM;
-    _sector->data = decode_crazy_data(inputbuffer, _sector->status);
+    Bytes userData = decode_crazy_data(inputbuffer, _sector->status);
+    _sector->data.clear();
+    _sector->data.writer().append(userData.slice(12, 512)).append(userData.slice(0, 12));
 }
--- a/arch/macintosh/macintosh.h
+++ b/arch/macintosh/macintosh.h
--- a/arch/mx/decoder.cc
+++ b/arch/mx/decoder.cc
@@ -37,7 +37,7 @@ AbstractDecoder::RecordType MxDecoder::advanceToNextRecord()
        const FluxMatcher* matcher = nullptr;
        _sector->clock = _clock = _fmr->seekToPattern(ID_PATTERN, matcher);
        readRawBits(32); /* skip the ID mark */
-        readRawBits(32); /* skip the track number */
+        _logicalTrack = decodeFmMfm(readRawBits(32)).reader().read_be16();
    }
    else if (_currentSector == 10)
    {
@@ -67,7 +67,7 @@ void MxDecoder::decodeSectorRecord()
        gotChecksum += br.read_le16();
    uint16_t wantChecksum = br.read_le16();

-    _sector->logicalTrack = _track->physicalTrack;
+    _sector->logicalTrack = _logicalTrack;
    _sector->logicalSide = _track->physicalSide;
    _sector->logicalSector = _currentSector;
    _sector->data = bytes.slice(0, SECTOR_SIZE);
--- a/arch/mx/mx.h
+++ b/arch/mx/mx.h
@@ -15,6 +15,7 @@ public:
 private:
    nanoseconds_t _clock;
    int _currentSector;
+    int _logicalTrack;
 };

 #endif
--- a/arch/victor9k/data_gcr.h
+++ b/arch/victor9k/data_gcr.h
--- a/arch/victor9k/decoder.cc
+++ b/arch/victor9k/decoder.cc
--- a/arch/victor9k/victor9k.h
+++ b/arch/victor9k/victor9k.h
--- a/arch/zilogmcz/decoder.cc
+++ b/arch/zilogmcz/decoder.cc
--- a/arch/zilogmcz/zilogmcz.h
+++ b/arch/zilogmcz/zilogmcz.h
--- a/doc/building.md
+++ b/doc/building.md
@@ -103,7 +103,43 @@ the unconnected pins and solder a short piece of wire to a GND pin on the
 board. Alternatively you'll need to splice it into your drive's power supply
 cable somehow. (The black one.)

-## Building the firmware
+## Programming the board
+
+You've got two options here. You can either use the precompiled firmware
+supplied with the source, or else install the Cypress SDK and build it
+yourself. If you want to hack the firmware source you need the latter, but
+if you trust me to do it for you use the precompiled firmware. In either
+case you'll need Windows and have to install some Cypress stuff.
+
+**Before you read this:** If you're on Windows, good news! You can download a
+precompiled version of the FluxEngine client and precompiled firmware [from
+the GitHub releases
+page](https://github.com/davidgiven/fluxengine/releases/latest). Simply unzip
+it somewhere and run the `.exe` files from a `cmd` window (or other shell).
+Follow the instructions below to program the board with the firmware.
+
+### Using the precompiled firmware
+
+On your Windows machine, [install the PSoC
+Programmer](https://www.cypress.com/products/psoc-programming-solutions).
+**Note:** _not_ the Cypress Programmer, which is for a different board!
+Cypress will make you register.
+
+Once done, run it. Plug the blunt end of the FluxEngine board into a USB
+port (the end which is a USB connector). The programmer should detect it
+and report it as a KitProg. You may be prompted to upgrade the programmer
+hardware; if so, follow the instructions and do it.
+
+Now go to File -> File Load and open
+`FluxEngine.cydsn/CortexM3/ARM_GCC_541/Release/FluxEngine.hex` in the
+project. If you're on Windows, the precompiled zipfile also contains a copy
+of this file. Press the Program button (the one in the toolbar marked with a
+down arrow). Stuff will happen and you should be left with three green boxes
+in the status bar and 'Programming Succeeded' at the top of the log window.
+
+You're done. You can unplug the board and close the programmer.
+
+### Building the firmware yourself

 On your Windows machine, [install the Cypress SDK and CY8CKIT-059
 BSP](http://www.cypress.com/documentation/development-kitsboards/cy8ckit-059-psoc-5lp-prototyping-kit-onboard-programmer-and).
@@ -118,7 +154,7 @@ tutorial and making the LED on your board flash. It'll tell you where all the
 controls are and how to program the board. Remember that the big end of the
 board plugs into your computer for programming.

-When you're ready, open the `FluxEngine.cydsn/FluxEngine.cywrk` workspace,
+When you're ready, open the `FluxEngine.cydsn/FluxEngine.cyprj` project,
 pick 'Program' from the menu, and the firmware should compile and be
 programmed onto your board.

@@ -139,11 +175,6 @@ the port and proceed normally.

 ## Building the client

-**Before you read this:** If you're on Windows, good news! You can download a
-*precompiled version of the FluxEngine client [from the GitHub releases
-*page](https://github.com/davidgiven/fluxengine/releases/latest). Simply unzip
-*it somewhere and run it from a `cmd` window (or other shell).
-
 The client software is where the intelligence, such as it is, is. It's pretty
 generic libusb stuff and should build and run on Windows, Linux and OSX as
 well, although on Windows it'll need MSYS2 and mingw32. You'll need to
--- a/doc/disk-amiga.md
+++ b/doc/disk-amiga.md
@@ -23,6 +23,17 @@ You should end up with an `amiga.adf` which is 901120 bytes long (for a
 normal DD disk) --- it ought to be a perfectly normal ADF file which you can
 use in an emulator.

+If you want the metadata as well, specify a 528 byte sector size for the
+output image:
+
+```
+fluxengine read amiga -o amiga.adf:b=528
+```
+
+You will end up with a 929280 byte long image which you probably _can't_ use
+in an emulator; each sector will contain the 512 bytes of user payload
+followed by the 16 bytes of metadata.
+
 Useful references
 -----------------

--- a/doc/disk-c64.md
+++ b/doc/disk-c64.md
@@ -23,7 +23,7 @@ computer](https://ilesj.wordpress.com/2014/05/14/1541-why-so-complicated/) of
 300 bytes per second (!). (The drive itself could transfer data reasonably
 quickly.)

-A standard 1541 disk has 35 tracks of 17 to 20 sectors, each 256 bytes long.
+A standard 1541 disk has 35 tracks of 17 to 21 sectors, each 256 bytes long.

 Reading discs
 -------------
@@ -34,15 +34,14 @@ Just do:
 fluxengine read c64
 ```

-You should end up with an `c64.img` which is 187136 bytes long (for a normal
-1541 disk).
+You should end up with an `c64.d64` file which is 174848 bytes long. You can
+load this straight into a Commodore 64 emulator such as
+[VICE](http://vice-emu.sourceforge.net/).

-**Big warning!** The image may not work in an emulator. Commodore 64 disk images are
+**Big warning!** Commodore 64 disk images are
 complicated due to the way the tracks are different sizes and the odd sector
-size. FluxEngine chooses to store them in a simple 256 x 20 x 35 layout,
-with holes where missing sectors should be. This was easiest. If anyone can
-suggest a better way, please [get in
-touch](https://github.com/davidgiven/fluxengine/issues/new).
+size, so you need the special D64 or LDBS output formats to represent them
+sensibly. Don't use IMG unless you know what you're doing.

 Useful references
 -----------------
--- a/doc/disk-macintosh.md
+++ b/doc/disk-macintosh.md
@@ -50,6 +50,10 @@ with holes where missing sectors should be. This was easiest. If anyone can
 suggest a better way, please [get in
 touch](https://github.com/davidgiven/fluxengine/issues/new).

+The 12 bytes of metadata _follow_ the 512 bytes of user payload in the sector
+image. If you don't want it, specify a geometry in the output file with a
+512-byte sectore size like `-o mac.img:c=80:h=1:s=12:b=512`.
+
 Useful references
 -----------------

--- a/doc/disk-mx.md
+++ b/doc/disk-mx.md
@@ -0,0 +1,65 @@
+Disk: DVK MX
+============
+
+The DVK (in Russian, ДВК, Диалоговый вычислительный комплекс or Dialogue
+Computing Complex) was a late 1970s Soviet personal computer, a cut-down
+version of the professional SM EVM (СМ ЭВМ, abbreviation of Система Малых ЭВМ
+--- literally System of Mini Computers), which _itself_ was an unlicensed
+clone of the PDP-11. The MX board was an early floppy drive controller board
+for it.
+
+<div style="text-align: center">
+<a href="http://www.leningrad.su/museum/show_big.php?n=1006"><img src="dvk3m.jpg" style="max-width: 60%" alt="A Durango F85, held precariously"></a>
+</div>
+
+The MX format is interesting in that it has to be read a track at a time. The
+format contains the usual ID prologue at the beginning of the track, then
+eleven data blocks and checksums, then the epilogue, then it stops. The
+actual encoding is normal FM. There were four different disk variants, in all
+combinations of single- and double-sided and 40- and 80-tracked; but every
+track contained eleven 256-byte sectors.
+
+The format varies subtly depending on whether you're using the 'new' driver
+or the 'old' driver. FluxEngine should read both.
+
+A track is:
+
+  * 8 x 0x0000 words (FM encoded as 01010101...)
+  * 1 x 0x00F3 --- start of track
+  * 1 x 0xnnnn --- track number
+  * 11 of:
+    * 128 words (256 bytes) of data
+    * 16 bit checksum
+  * **if 'new' format:**
+    * 3 x 0x83nn --- `n = (track_number<<1) + side_number`
+  * **if 'old' format:**
+    * 3 x 0x8301
+
+The checksum is just the unsigned integer sum of all the words in the sector.
+Words are all stored little-endian.
+
+Reading discs
+-------------
+
+```
+fluxengine read mx
+```
+
+You should end up with an `mx.img` which will vary in length depending on the format. The default is double-sided 80-track. For the other formats, use:
+
+  * single-sided 40-track: `-s :s=0:t=0-79x2`
+  * double-sided 40-track: `-s :s=0-1:t=0-79x2`
+  * single-sided 40-track: `-s :s=0:t=0-79`
+  * double-sided 40-track: `-s :s=0-1:t=0-79`
+
+
+Useful references
+-----------------
+
+  - [The Soviet Digital Electronics
+    Museum](http://www.leningrad.su/museum/main.php) (source of the image
+    above)
+
+  - [a random post on the HxC2001 support
+    forum](http://torlus.com/floppy/forum/viewtopic.php?t=1384) with lots of
+    information on the format
--- a/doc/dvk3m.jpg
+++ b/doc/dvk3m.jpg
--- a/doc/using.md
+++ b/doc/using.md
@@ -112,6 +112,51 @@ sensible for the command you're using.
 **Important note:** FluxEngine _always_ uses zero-based units (even if the
 *disk format says otherwise).

+### Input and output specifiers
+
+These use a very similar syntax to the source and destination specifiers
+(because they're based on the same microformat library!) but are used for
+input and output _images_: i.e. nicely lined up arrays of sectors which you
+can actually do something with.
+
+Use `--input` (`-i`) or `--output` (`-o`) as appropriate to tell FluxEngine
+where you want to read from or write to. The actual format is autodetected
+based on the extension:
+
+  - `.img` or `.adf`: raw sector images in CHS order. Append
+    `:c=80:h=2:s=9:b=512` to set the geometry; that specifies 80 cylinders, 2
+    heads, 9 sectors, 512 bytes per sector. For output files (`--output`) the
+    geometry will be autodetected if left unspecified. For input files you
+    normally have to specify it.
+
+  - `.ldbs`: John Elliott's [LDBS disk image
+    format](http://www.seasip.info/Unix/LibDsk/ldbs.html), which is
+    consumable by the [libdsk](http://www.seasip.info/Unix/LibDsk/) suite of
+    tools. This allows things like variable numbers of sectors per track
+    (e.g. Macintosh or Commodore 64) and also provides information about
+    whether sectors were read correctly. You can use libdsk to convert this
+    to other formats, using a command like this:
+
+    ```
+    $ dsktrans out.ldbs -otype tele out.td0
+    ```
+
+    ...to convert to TeleDisk format. (Note you have to use dsktrans rather
+    than dskconv due to a minor bug in the geometry hadnling.)
+
+    FluxEngine's LDBS support is currently limited to write only, and
+    it doesn't store a lot of the more esoteric LDBS features like format
+    types, timings, and data rates.
+
+  - `.d64`: the venerable Commodore 64 disk image format as used by the 1540,
+    1541, etc. This is a special-purpose format due to the weird layout of
+    1540 disks and while you can use this for non-Commodore disks the result
+    will be gibberish. Use this to image Commodore 64 disks and load the
+    result into an emulator.
+
+    FluxEngine's D64 support is currently limited to write only. It will work
+    with up to 40 logical tracks.
+
 ### High density disks

 High density disks use a different magnetic medium to low and double density
--- a/lib/brother/encoder.cc
+++ b/lib/brother/encoder.cc
@@ -1,92 +0,0 @@
-#include "globals.h"
-#include "record.h"
-#include "decoders/decoders.h"
-#include "brother.h"
-#include "crc.h"
-
-static int encode_header_gcr(uint16_t word)
-{
-	switch (word)
-	{
-		#define GCR_ENTRY(gcr, data) \
-			case data: return gcr;
-		#include "header_gcr.h"
-		#undef GCR_ENTRY
-	}                       
-	return -1;             
-};
-
-static int encode_data_gcr(uint8_t data)
-{
-	switch (data)
-	{
-		#define GCR_ENTRY(gcr, data) \
-			case data: return gcr;
-		#include "data_gcr.h"
-		#undef GCR_ENTRY
-	}                       
-	return -1;             
-};
-
-static void write_bits(std::vector<bool>& bits, unsigned& cursor, uint32_t data, int width)
-{
-	cursor += width;
-	for (int i=0; i<width; i++)
-	{
-		unsigned pos = cursor - i - 1;
-		if (pos < bits.size())
-			bits[pos] = data & 1;
-		data >>= 1;
-	}
-}
-
-void writeBrotherSectorHeader(std::vector<bool>& bits, unsigned& cursor,
-		int track, int sector)
-{
-	write_bits(bits, cursor, 0xffffffff, 31);
-	write_bits(bits, cursor, BROTHER_SECTOR_RECORD, 32);
-	write_bits(bits, cursor, encode_header_gcr(track), 16);
-	write_bits(bits, cursor, encode_header_gcr(sector), 16);
-	write_bits(bits, cursor, encode_header_gcr(0x2f), 16);
-}
-
-void writeBrotherSectorData(std::vector<bool>& bits, unsigned& cursor, const Bytes& data)
-{
-	write_bits(bits, cursor, 0xffffffff, 32);
-	write_bits(bits, cursor, BROTHER_DATA_RECORD, 32);
-
-	uint16_t fifo = 0;
-	int width = 0;
-
-	if (data.size() != BROTHER_DATA_RECORD_PAYLOAD)
-		Error() << "unsupported sector size";
-
-	auto write_byte = [&](uint8_t byte)
-	{
-		fifo |= (byte << (8 - width));
-		width += 8;
-
-		while (width >= 5)
-		{
-			uint8_t quintet = fifo >> 11;
-			fifo <<= 5;
-			width -= 5;
-
-			write_bits(bits, cursor, encode_data_gcr(quintet), 8);
-		}
-	};
-
-	for (uint8_t byte : data)
-		write_byte(byte);
-
-	uint32_t realCrc = crcbrother(data);
-	write_byte(realCrc>>16);
-	write_byte(realCrc>>8);
-	write_byte(realCrc);
-	write_byte(0x58); /* magic */
-    write_byte(0xd4);
-    while (width != 0)
-        write_byte(0);
-}
-
-
--- a/lib/bytes.cc
+++ b/lib/bytes.cc
@@ -2,6 +2,7 @@
 #include "bytes.h"
 #include "fmt/format.h"
 #include "common/crunch.h"
+#include <fstream>
 #include <zlib.h>

 static std::shared_ptr<std::vector<uint8_t>> createVector(unsigned size)
@@ -280,6 +281,16 @@ Bytes Bytes::uncrunch() const
    return output;
 }

+void Bytes::writeToFile(const std::string& filename) const
+{
+    std::ofstream f(filename, std::ios::out | std::ios::binary);
+    if (!f.is_open())
+        Error() << fmt::format("cannot open output file '{}'", filename);
+
+    f.write((const char*) cbegin(), size());
+    f.close();
+}
+
 ByteReader Bytes::reader() const
 {
    return ByteReader(*this);
--- a/lib/bytes.h
+++ b/lib/bytes.h
@@ -56,6 +56,8 @@ public:
    ByteReader reader() const;
    ByteWriter writer();

+    void writeToFile(const std::string& filename) const;
+
 private:
    std::shared_ptr<std::vector<uint8_t>> _data;
    unsigned _low;
--- a/lib/dataspec.cc
+++ b/lib/dataspec.cc
@@ -5,6 +5,11 @@
 #include <regex>
 #include <sstream>

+MissingModifierException::MissingModifierException(const std::string& mod):
+    mod(mod),
+    std::runtime_error(fmt::format("missing mandatory modifier '{}'", mod))
+{}
+
 std::vector<std::string> DataSpec::split(
        const std::string& s, const std::string& delimiter)
 {
@@ -74,31 +79,108 @@ void DataSpec::set(const std::string& spec)
    filename = words[0];
    if (words.size() > 1)
    {
-        locations.clear();
-
        for (size_t i = 1; i < words.size(); i++)
        {
            auto mod = parseMod(words[i]);
-            if ((mod.name != "t") && (mod.name != "s") && (mod.name != "d"))
-                Error() << fmt::format("unknown data modifier '{}'", mod.name);
            modifiers[mod.name] = mod;
        }
+    }
+}

-        const auto& drives = modifiers["d"].data;
+const DataSpec::Modifier& DataSpec::at(const std::string& mod) const
+{
+    try
+    {
+        return modifiers.at(mod);
+    }
+    catch (const std::out_of_range& e)
+    {
+        throw MissingModifierException(mod);
+    }
+}
+
+bool DataSpec::has(const std::string& mod) const
+{
+    return modifiers.find(mod) != modifiers.end();
+}
+
+FluxSpec::FluxSpec(const DataSpec& spec)
+{
+    try 
+    {
+        filename = spec.filename;
+
+        locations.clear();
+
+        const auto& drives = spec.at("d").data;
        if (drives.size() != 1)
            Error() << "you must specify exactly one drive";
        drive = *drives.begin();

-        const auto& tracks = modifiers["t"].data;
-        const auto& sides = modifiers["s"].data;
+        const auto& tracks = spec.at("t").data;
+        const auto& sides = spec.at("s").data;
        for (auto track : tracks)
        {
            for (auto side : sides)
                locations.push_back({ drive, track, side });
        }
+
+        for (const auto& e : spec.modifiers)
+        {
+            const auto name = e.second.name;
+            if ((name != "t") && (name != "s") && (name != "d"))
+                Error() << fmt::format("unknown fluxspec modifier '{}'", name);
+        }
+    }
+    catch (const MissingModifierException& e)
+    {
+        Error() << e.what() << " in fluxspec '" << spec << "'";
    }
 }

+ImageSpec::ImageSpec(const DataSpec& spec)
+{
+    try
+    {
+        filename = spec.filename;
+
+        if (!spec.has("c") && !spec.has("h") && !spec.has("s") && !spec.has("b"))
+        {
+            cylinders = heads = sectors = bytes = 0;
+            initialised = false;
+        }
+        else
+        {
+            cylinders = spec.at("c").only();
+            heads = spec.at("h").only();
+            sectors = spec.at("s").only();
+            bytes = spec.at("b").only();
+            initialised = true;
+        }
+    }
+    catch (const MissingModifierException& e)
+    {
+        Error() << e.what() << " in imagespec '" << spec << "'";
+    }
+
+    for (const auto& e : spec.modifiers)
+    {
+        const auto name = e.second.name;
+        if ((name != "c") && (name != "h") && (name != "s") && (name != "b"))
+            Error() << fmt::format("unknown fluxspec modifier '{}'", name);
+    }
+}
+
+ImageSpec::ImageSpec(const std::string filename,
+        unsigned cylinders, unsigned heads, unsigned sectors, unsigned bytes):
+    filename(filename),
+    cylinders(cylinders),
+    heads(heads),
+    sectors(sectors),
+    bytes(bytes),
+    initialised(true)
+{}
+
 DataSpec::operator std::string(void) const
 {
    std::stringstream ss;
--- a/lib/dataspec.h
+++ b/lib/dataspec.h
@@ -1,8 +1,57 @@
 #ifndef DATASPEC_H
 #define DATASPEC_H

+class MissingModifierException : public std::runtime_error
+{
+public:
+    MissingModifierException(const std::string& mod);
+    const std::string mod;
+};
+
 class DataSpec
 {
+public:
+    struct Modifier
+    {
+        std::string name;
+        std::set<unsigned> data;
+        std::string source;
+
+        bool operator == (const Modifier& other) const
+        { return (name == other.name) && (data == other.data); }
+
+        bool operator != (const Modifier& other) const
+        { return (name != other.name) || (data != other.data); }
+
+        unsigned only() const
+        {
+            if (data.size() != 1)
+                Error() << "modifier " << name << " can only have one value";
+            return *(data.begin());
+        }
+    };
+
+public:
+    static std::vector<std::string> split(
+        const std::string& s, const std::string& delimiter);
+    static Modifier parseMod(const std::string& spec);
+
+public:
+    DataSpec(const std::string& spec)
+    { set(spec); }
+
+    void set(const std::string& spec);
+    operator std::string () const;
+
+    const Modifier& at(const std::string& mod) const;
+    bool has(const std::string& mod) const;
+
+    std::string filename;
+    std::map<std::string, Modifier> modifiers;
+};
+
+class FluxSpec
+{
 public:
    struct Location
    {
@@ -17,36 +66,29 @@ public:
        { return (drive != other.drive) || (track != other.track) || (side != other.side); }
    };

-    struct Modifier
-    {
-        std::string name;
-        std::set<unsigned> data;
-        std::string source;
-
-        bool operator == (const Modifier& other) const
-        { return (name == other.name) && (data == other.data); }
-
-        bool operator != (const Modifier& other) const
-        { return (name != other.name) || (data != other.data); }
-    };
+public:
+    FluxSpec(const DataSpec& dataspec);

 public:
-    static std::vector<std::string> split(
-        const std::string& s, const std::string& delimiter);
-    static Modifier parseMod(const std::string& spec);
-
-public:
-    DataSpec(const std::string& spec)
-    { set(spec); }
-
-    void set(const std::string& spec);
-    operator std::string () const;
-
    std::string filename;
-    std::map<std::string, Modifier> modifiers;
    std::vector<Location> locations;
    unsigned drive;
-    unsigned revolutions;
+};
+
+class ImageSpec
+{
+public:
+    ImageSpec(const DataSpec& dataspec);
+    ImageSpec(const std::string filename,
+        unsigned cylinders, unsigned heads, unsigned sectors, unsigned bytes);
+
+public:
+    std::string filename;
+    unsigned cylinders;
+    unsigned heads;
+    unsigned sectors;
+    unsigned bytes;
+    bool initialised : 1;
 };

 static inline std::ostream& operator << (std::ostream& os, const DataSpec& dataSpec)
--- a/lib/encoders/encoders.cc
+++ b/lib/encoders/encoders.cc
--- a/lib/encoders/encoders.h
+++ b/lib/encoders/encoders.h
@@ -0,0 +1,18 @@
+#ifndef ENCODERS_H
+#define ENCODERS_H
+
+class Fluxmap;
+class SectorSet;
+
+class AbstractEncoder
+{
+public:
+    virtual ~AbstractEncoder() {}
+
+public:
+    virtual std::unique_ptr<Fluxmap> encode(
+        int physicalTrack, int physicalSide, const SectorSet& allSectors) = 0;
+};
+
+#endif
+
--- a/lib/fluxmap.h
+++ b/lib/fluxmap.h
@@ -21,6 +21,7 @@ public:

 public:
    nanoseconds_t duration() const { return _duration; }
+    unsigned ticks() const { return _ticks; }
    size_t bytes() const { return _bytes.size(); }
    const Bytes& rawBytes() const { return _bytes; }

--- a/lib/fluxsink/fluxsink.cc
+++ b/lib/fluxsink/fluxsink.cc
@@ -10,7 +10,7 @@ static bool ends_with(const std::string& value, const std::string& ending)
    return std::equal(ending.rbegin(), ending.rend(), value.rbegin());
 }

-std::unique_ptr<FluxSink> FluxSink::create(const DataSpec& spec)
+std::unique_ptr<FluxSink> FluxSink::create(const FluxSpec& spec)
 {
    const auto& filename = spec.filename;

--- a/lib/fluxsink/fluxsink.h
+++ b/lib/fluxsink/fluxsink.h
@@ -2,7 +2,7 @@
 #define FLUXSINK_H

 class Fluxmap;
-class DataSpec;
+class FluxSpec;

 class FluxSink
 {
@@ -14,7 +14,7 @@ private:
    static std::unique_ptr<FluxSink> createHardwareFluxSink(unsigned drive);

 public:
-    static std::unique_ptr<FluxSink> create(const DataSpec& spec);
+    static std::unique_ptr<FluxSink> create(const FluxSpec& spec);

 public:
    virtual void writeFlux(int track, int side, Fluxmap& fluxmap) = 0;
--- a/lib/fluxsource/fluxsource.cc
+++ b/lib/fluxsource/fluxsource.cc
@@ -10,7 +10,7 @@ static bool ends_with(const std::string& value, const std::string& ending)
    return std::equal(ending.rbegin(), ending.rend(), value.rbegin());
 }

-std::unique_ptr<FluxSource> FluxSource::create(const DataSpec& spec)
+std::unique_ptr<FluxSource> FluxSource::create(const FluxSpec& spec)
 {
    const auto& filename = spec.filename;

--- a/lib/fluxsource/fluxsource.h
+++ b/lib/fluxsource/fluxsource.h
@@ -6,7 +6,7 @@
 extern FlagGroup hardwareFluxSourceFlags;

 class Fluxmap;
-class DataSpec;
+class FluxSpec;

 class FluxSource
 {
@@ -19,7 +19,7 @@ private:
    static std::unique_ptr<FluxSource> createStreamFluxSource(const std::string& path);

 public:
-    static std::unique_ptr<FluxSource> create(const DataSpec& spec);
+    static std::unique_ptr<FluxSource> create(const FluxSpec& spec);

 public:
    virtual std::unique_ptr<Fluxmap> readFlux(int track, int side) = 0;
--- a/lib/image.cc
+++ b/lib/image.cc
@@ -1,150 +1,25 @@
 #include "globals.h"
 #include "image.h"
+#include "flags.h"
+#include "dataspec.h"
 #include "sector.h"
 #include "sectorset.h"
+#include "imagereader/imagereader.h"
+#include "imagewriter/imagewriter.h"
 #include "fmt/format.h"
 #include <algorithm>
 #include <iostream>
 #include <fstream>

-Geometry guessGeometry(const SectorSet& sectors)
+SectorSet readSectorsFromFile(const ImageSpec& spec)
 {
-	Geometry g;
-	sectors.calculateSize(g.tracks, g.heads, g.sectors, g.sectorSize);
-	return g;
+	return ImageReader::create(spec)->readImage();
 }

-void readSectorsFromFile(SectorSet& sectors, const Geometry& geometry,
-		const std::string& filename)
+void writeSectorsToFile(const SectorSet& sectors, const ImageSpec& spec)
 {
-    std::ifstream inputFile(filename, std::ios::in | std::ios::binary);
-    if (!inputFile.is_open())
-		Error() << "cannot open input file";
-
-    size_t headSize = geometry.sectors * geometry.sectorSize;
-    size_t trackSize = headSize * geometry.heads;
-
-    std::cout << fmt::format("{} tracks, {} heads, {} sectors, {} bytes per sector, {} kB total",
-					geometry.tracks, geometry.heads,
-					geometry.sectors, geometry.sectorSize,
-					geometry.tracks * trackSize / 1024)
-			  << std::endl;
-
-	for (int track = 0; track < geometry.tracks; track++)
-	{
-		for (int head = 0; head < geometry.heads; head++)
-		{
-			for (int sectorId = 0; sectorId < geometry.sectors; sectorId++)
-			{
-				inputFile.seekg(track*trackSize + head*headSize + sectorId*geometry.sectorSize, std::ios::beg);
-
-				Bytes data(geometry.sectorSize);
-				inputFile.read((char*) data.begin(), geometry.sectorSize);
-
-				std::unique_ptr<Sector>& sector = sectors.get(track, head, sectorId);
-				sector.reset(new Sector);
-				sector->status = Sector::OK;
-				sector->logicalTrack = sector->physicalTrack = track;
-				sector->logicalSide = sector->physicalSide = head;
-				sector->logicalSector = sectorId;
-				sector->data = data;
-			}
-		}
-	}
-}
-
-void writeSectorsToFile(const SectorSet& sectors, const Geometry& geometry,
-		const std::string& filename)
-{
-	/* Emit the map. */
-
-	int badSectors = 0;
-	int missingSectors = 0;
-	int totalSectors = 0;
-	std::cout << "H.SS Tracks --->" << std::endl;
-	for (int head = 0; head < geometry.heads; head++)
-	{
-		for (int sectorId = 0; sectorId < geometry.sectors; sectorId++)
-		{
-			std::cout << fmt::format("{}.{:2} ", head, sectorId);
-			for (int track = 0; track < geometry.tracks; track++)
-			{
-				Sector* sector = sectors.get(track, head, sectorId);
-				if (!sector)
-				{
-					std::cout << 'X';
-					missingSectors++;
-				}
-				else
-				{
-					switch (sector->status)
-					{
-						case Sector::OK:
-                            std::cout << '.';
-                            break;
-
-                        case Sector::BAD_CHECKSUM:
-                            std::cout << 'B';
-                            badSectors++;
-                            break;
-
-                        case Sector::CONFLICT:
-                            std::cout << 'C';
-                            badSectors++;
-                            break;
-
-                        default:
-                            std::cout << '?';
-                            break;
-                    }
-				}
-				totalSectors++;
-			}
-			std::cout << std::endl;
-		}
-	}
-	int goodSectors = totalSectors - missingSectors - badSectors;
-	if (totalSectors == 0)
-		std::cout << "No sectors in output; skipping analysis" << std::endl;
-	else
-	{
-		std::cout << "Good sectors: " << goodSectors << "/" << totalSectors
-				  << " (" << (100*goodSectors/totalSectors) << "%)"
-				  << std::endl;
-		std::cout << "Missing sectors: " << missingSectors << "/" << totalSectors
-				  << " (" << (100*missingSectors/totalSectors) << "%)"
-				  << std::endl;
-		std::cout << "Bad sectors: " << badSectors << "/" << totalSectors
-				  << " (" << (100*badSectors/totalSectors) << "%)"
-				  << std::endl;
-    }
-
-    size_t headSize = geometry.sectors * geometry.sectorSize;
-    size_t trackSize = headSize * geometry.heads;
-
-    std::cout << fmt::format("{} tracks, {} heads, {} sectors, {} bytes per sector, {} kB total",
-					geometry.tracks, geometry.heads,
-					geometry.sectors, geometry.sectorSize,
-					geometry.tracks * trackSize / 1024)
-			  << std::endl;
-
-    std::ofstream outputFile(filename, std::ios::out | std::ios::binary);
-    if (!outputFile.is_open())
-		Error() << "cannot open output file";
-
-	for (int track = 0; track < geometry.tracks; track++)
-	{
-		for (int head = 0; head < geometry.heads; head++)
-		{
-			for (int sectorId = 0; sectorId < geometry.sectors; sectorId++)
-			{
-				auto sector = sectors.get(track, head, sectorId);
-				if (sector)
-				{
-					outputFile.seekp(sector->logicalTrack*trackSize + sector->logicalSide*headSize + sector->logicalSector*geometry.sectorSize, std::ios::beg);
-					outputFile.write((const char*) sector->data.cbegin(), sector->data.size());
-				}
-			}
-		}
-	}
+	std::unique_ptr<ImageWriter> writer(ImageWriter::create(sectors, spec));
+	writer->adjustGeometry();
+	writer->printMap();
+	writer->writeImage();
 }
--- a/lib/image.h
+++ b/lib/image.h
@@ -2,26 +2,13 @@
 #define IMAGE_H

 class SectorSet;
+class ImageSpec;

-class Geometry
-{
-public:
-	int tracks;
-	int heads;
-	int sectors;
-	int sectorSize;
-};
-
-extern Geometry guessGeometry(const SectorSet& sectors);
-
-extern void readSectorsFromFile(
-	SectorSet& sectors,
-	const Geometry& geometry,
-	const std::string& filename);
+extern SectorSet readSectorsFromFile(
+	const ImageSpec& filename);

 extern void writeSectorsToFile(
 	const SectorSet& sectors,
-	const Geometry& geometry,
-	const std::string& filename);
+	const ImageSpec& filename);

 #endif
--- a/lib/imagereader/imagereader.cc
+++ b/lib/imagereader/imagereader.cc
@@ -0,0 +1,31 @@
+#include "globals.h"
+#include "image.h"
+#include "flags.h"
+#include "dataspec.h"
+#include "sector.h"
+#include "sectorset.h"
+#include "imagereader/imagereader.h"
+#include "fmt/format.h"
+
+static bool ends_with(const std::string& value, const std::string& ending)
+{
+    if (ending.size() > value.size())
+        return false;
+    return std::equal(ending.rbegin(), ending.rend(), value.rbegin());
+}
+
+std::unique_ptr<ImageReader> ImageReader::create(const ImageSpec& spec)
+{
+    const auto& filename = spec.filename;
+
+    if (ends_with(filename, ".img") || ends_with(filename, ".adf"))
+        return createImgImageReader(spec);
+
+    Error() << "unrecognised image filename extension";
+    return std::unique_ptr<ImageReader>();
+}
+
+ImageReader::ImageReader(const ImageSpec& spec):
+    spec(spec)
+{}
+
--- a/lib/imagereader/imagereader.h
+++ b/lib/imagereader/imagereader.h
@@ -0,0 +1,27 @@
+#ifndef IMAGEREADER_H
+#define IMAGEREADER_H
+
+class SectorSet;
+class ImageSpec;
+
+class ImageReader
+{
+public:
+	ImageReader(const ImageSpec& spec);
+	virtual ~ImageReader() {};
+
+public:
+    static std::unique_ptr<ImageReader> create(const ImageSpec& spec);
+
+private:
+    static std::unique_ptr<ImageReader> createImgImageReader(const ImageSpec& spec);
+
+public:
+	virtual SectorSet readImage() = 0;
+
+protected:
+	ImageSpec spec;
+};
+
+#endif
+
--- a/lib/imagereader/imgimagereader.cc
+++ b/lib/imagereader/imgimagereader.cc
@@ -0,0 +1,66 @@
+#include "globals.h"
+#include "image.h"
+#include "flags.h"
+#include "dataspec.h"
+#include "sector.h"
+#include "sectorset.h"
+#include "imagereader/imagereader.h"
+#include "fmt/format.h"
+#include <algorithm>
+#include <iostream>
+#include <fstream>
+
+class ImgImageReader : public ImageReader
+{
+public:
+	ImgImageReader(const ImageSpec& spec):
+		ImageReader(spec)
+	{}
+
+	SectorSet readImage()
+	{
+        std::ifstream inputFile(spec.filename, std::ios::in | std::ios::binary);
+        if (!inputFile.is_open())
+            Error() << "cannot open input file";
+
+        size_t headSize = spec.sectors * spec.bytes;
+        size_t trackSize = headSize * spec.heads;
+
+        std::cout << fmt::format("reading {} tracks, {} heads, {} sectors, {} bytes per sector, {} kB total",
+                        spec.cylinders, spec.heads,
+                        spec.sectors, spec.bytes,
+                        spec.cylinders * trackSize / 1024)
+                << std::endl;
+
+        SectorSet sectors;
+        for (int track = 0; track < spec.cylinders; track++)
+        {
+            for (int head = 0; head < spec.heads; head++)
+            {
+                for (int sectorId = 0; sectorId < spec.sectors; sectorId++)
+                {
+                    inputFile.seekg(track*trackSize + head*headSize + sectorId*spec.bytes, std::ios::beg);
+
+                    Bytes data(spec.bytes);
+                    inputFile.read((char*) data.begin(), spec.bytes);
+
+                    std::unique_ptr<Sector>& sector = sectors.get(track, head, sectorId);
+                    sector.reset(new Sector);
+                    sector->status = Sector::OK;
+                    sector->logicalTrack = sector->physicalTrack = track;
+                    sector->logicalSide = sector->physicalSide = head;
+                    sector->logicalSector = sectorId;
+                    sector->data = data;
+                }
+            }
+        }
+        return sectors;
+	}
+};
+
+std::unique_ptr<ImageReader> ImageReader::createImgImageReader(
+	const ImageSpec& spec)
+{
+    return std::unique_ptr<ImageReader>(new ImgImageReader(spec));
+}
+
--- a/lib/imagewriter/d64imagewriter.cc
+++ b/lib/imagewriter/d64imagewriter.cc
@@ -0,0 +1,64 @@
+#include "globals.h"
+#include "image.h"
+#include "flags.h"
+#include "dataspec.h"
+#include "sector.h"
+#include "sectorset.h"
+#include "imagewriter/imagewriter.h"
+#include "fmt/format.h"
+#include "ldbs.h"
+#include <algorithm>
+#include <iostream>
+#include <fstream>
+
+static int sectors_per_track(int track)
+{
+    if (track < 17)
+        return 21;
+    if (track < 24)
+        return 19;
+    if (track < 30)
+        return 18;
+    return 17;
+}
+
+class D64ImageWriter : public ImageWriter
+{
+public:
+	D64ImageWriter(const SectorSet& sectors, const ImageSpec& spec):
+		ImageWriter(sectors, spec)
+	{}
+
+	void writeImage()
+	{
+		std::cout << "writing D64 triangular image\n";
+
+		std::ofstream outputFile(spec.filename, std::ios::out | std::ios::binary);
+		if (!outputFile.is_open())
+			Error() << "cannot open output file";
+
+        uint32_t offset = 0;
+		for (int track = 0; track < 40; track++)
+		{
+            int sectorCount = sectors_per_track(track);
+            for (int sectorId = 0; sectorId < sectorCount; sectorId++)
+            {
+                const auto& sector = sectors.get(track, 0, sectorId);
+                if (sector)
+                {
+                    outputFile.seekp(offset);
+                    outputFile.write((const char*) sector->data.cbegin(), 256);
+                }
+
+                offset += 256;
+            }
+		}
+    }
+};
+
+std::unique_ptr<ImageWriter> ImageWriter::createD64ImageWriter(
+	const SectorSet& sectors, const ImageSpec& spec)
+{
+    return std::unique_ptr<ImageWriter>(new D64ImageWriter(sectors, spec));
+}
+
--- a/lib/imagewriter/imagewriter.cc
+++ b/lib/imagewriter/imagewriter.cc
@@ -0,0 +1,109 @@
+#include "globals.h"
+#include "image.h"
+#include "flags.h"
+#include "dataspec.h"
+#include "sector.h"
+#include "sectorset.h"
+#include "imagewriter/imagewriter.h"
+#include "fmt/format.h"
+
+static bool ends_with(const std::string& value, const std::string& ending)
+{
+    if (ending.size() > value.size())
+        return false;
+    return std::equal(ending.rbegin(), ending.rend(), value.rbegin());
+}
+
+std::unique_ptr<ImageWriter> ImageWriter::create(const SectorSet& sectors, const ImageSpec& spec)
+{
+    const auto& filename = spec.filename;
+
+    if (ends_with(filename, ".img") || ends_with(filename, ".adf"))
+        return createImgImageWriter(sectors, spec);
+	else if (ends_with(filename, ".ldbs"))
+		return createLDBSImageWriter(sectors, spec);
+	else if (ends_with(filename, ".d64"))
+		return createD64ImageWriter(sectors, spec);
+
+    Error() << "unrecognised image filename extension";
+    return std::unique_ptr<ImageWriter>();
+}
+
+ImageWriter::ImageWriter(const SectorSet& sectors, const ImageSpec& spec):
+    sectors(sectors),
+    spec(spec)
+{}
+
+void ImageWriter::adjustGeometry()
+{
+	if (!spec.initialised)
+	{
+		sectors.calculateSize(spec.cylinders, spec.heads, spec.sectors, spec.bytes);
+        spec.initialised = true;
+		std::cout << "Autodetecting output geometry\n";
+	}
+}
+
+void ImageWriter::printMap()
+{
+	int badSectors = 0;
+	int missingSectors = 0;
+	int totalSectors = 0;
+	std::cout << "H.SS Tracks --->" << std::endl;
+	for (int head = 0; head < spec.heads; head++)
+	{
+		for (int sectorId = 0; sectorId < spec.sectors; sectorId++)
+		{
+			std::cout << fmt::format("{}.{:2} ", head, sectorId);
+			for (int track = 0; track < spec.cylinders; track++)
+			{
+				const auto& sector = sectors.get(track, head, sectorId);
+				if (!sector)
+				{
+					std::cout << 'X';
+					missingSectors++;
+				}
+				else
+				{
+					switch (sector->status)
+					{
+						case Sector::OK:
+                            std::cout << '.';
+                            break;
+
+                        case Sector::BAD_CHECKSUM:
+                            std::cout << 'B';
+                            badSectors++;
+                            break;
+
+                        case Sector::CONFLICT:
+                            std::cout << 'C';
+                            badSectors++;
+                            break;
+
+                        default:
+                            std::cout << '?';
+                            break;
+                    }
+				}
+				totalSectors++;
+			}
+			std::cout << std::endl;
+		}
+	}
+	int goodSectors = totalSectors - missingSectors - badSectors;
+	if (totalSectors == 0)
+		std::cout << "No sectors in output; skipping analysis" << std::endl;
+	else
+	{
+		std::cout << "Good sectors: " << goodSectors << "/" << totalSectors
+				  << " (" << (100*goodSectors/totalSectors) << "%)"
+				  << std::endl;
+		std::cout << "Missing sectors: " << missingSectors << "/" << totalSectors
+				  << " (" << (100*missingSectors/totalSectors) << "%)"
+				  << std::endl;
+		std::cout << "Bad sectors: " << badSectors << "/" << totalSectors
+				  << " (" << (100*badSectors/totalSectors) << "%)"
+				  << std::endl;
+    }
+}
--- a/lib/imagewriter/imagewriter.h
+++ b/lib/imagewriter/imagewriter.h
@@ -0,0 +1,34 @@
+#ifndef IMAGEWRITER_H
+#define IMAGEWRITER_H
+
+class SectorSet;
+class ImageSpec;
+
+class ImageWriter
+{
+public:
+	ImageWriter(const SectorSet& sectors, const ImageSpec& spec);
+	virtual ~ImageWriter() {};
+
+public:
+    static std::unique_ptr<ImageWriter> create(const SectorSet& sectors, const ImageSpec& spec);
+
+private:
+    static std::unique_ptr<ImageWriter> createImgImageWriter(
+		const SectorSet& sectors, const ImageSpec& spec);
+    static std::unique_ptr<ImageWriter> createLDBSImageWriter(
+		const SectorSet& sectors, const ImageSpec& spec);
+    static std::unique_ptr<ImageWriter> createD64ImageWriter(
+		const SectorSet& sectors, const ImageSpec& spec);
+
+public:
+	virtual void adjustGeometry();
+	void printMap();
+	virtual void writeImage() = 0;
+
+protected:
+	const SectorSet& sectors;
+	ImageSpec spec;
+};
+
+#endif
--- a/lib/imagewriter/imgimagewriter.cc
+++ b/lib/imagewriter/imgimagewriter.cc
@@ -0,0 +1,62 @@
+#include "globals.h"
+#include "image.h"
+#include "flags.h"
+#include "dataspec.h"
+#include "sector.h"
+#include "sectorset.h"
+#include "imagewriter/imagewriter.h"
+#include "fmt/format.h"
+#include <algorithm>
+#include <iostream>
+#include <fstream>
+
+class ImgImageWriter : public ImageWriter
+{
+public:
+	ImgImageWriter(const SectorSet& sectors, const ImageSpec& spec):
+		ImageWriter(sectors, spec)
+	{}
+
+	void writeImage()
+	{
+		unsigned numCylinders = spec.cylinders;
+		unsigned numHeads = spec.heads;
+		unsigned numSectors = spec.sectors;
+		unsigned numBytes = spec.bytes;
+
+		size_t headSize = numSectors * numBytes;
+		size_t trackSize = headSize * numHeads;
+
+		std::cout << fmt::format("writing {} tracks, {} heads, {} sectors, {} bytes per sector, {} kB total",
+						numCylinders, numHeads,
+						numSectors, numBytes,
+						numCylinders * trackSize / 1024)
+				<< std::endl;
+
+		std::ofstream outputFile(spec.filename, std::ios::out | std::ios::binary);
+		if (!outputFile.is_open())
+			Error() << "cannot open output file";
+
+		for (int track = 0; track < numCylinders; track++)
+		{
+			for (int head = 0; head < numHeads; head++)
+			{
+				for (int sectorId = 0; sectorId < numSectors; sectorId++)
+				{
+					const auto& sector = sectors.get(track, head, sectorId);
+					if (sector)
+					{
+						outputFile.seekp(sector->logicalTrack*trackSize + sector->logicalSide*headSize + sector->logicalSector*numBytes, std::ios::beg);
+						outputFile.write((const char*) sector->data.cbegin(), sector->data.size());
+					}
+				}
+			}
+		}
+	}
+};
+
+std::unique_ptr<ImageWriter> ImageWriter::createImgImageWriter(
+	const SectorSet& sectors, const ImageSpec& spec)
+{
+    return std::unique_ptr<ImageWriter>(new ImgImageWriter(sectors, spec));
+}
--- a/lib/imagewriter/ldbsimagewriter.cc
+++ b/lib/imagewriter/ldbsimagewriter.cc
@@ -0,0 +1,107 @@
+#include "globals.h"
+#include "image.h"
+#include "flags.h"
+#include "dataspec.h"
+#include "sector.h"
+#include "sectorset.h"
+#include "imagewriter/imagewriter.h"
+#include "fmt/format.h"
+#include "ldbs.h"
+#include <algorithm>
+#include <iostream>
+#include <fstream>
+
+class LDBSImageWriter : public ImageWriter
+{
+public:
+	LDBSImageWriter(const SectorSet& sectors, const ImageSpec& spec):
+		ImageWriter(sectors, spec)
+	{}
+
+	void writeImage()
+	{
+        LDBS ldbs;
+
+		unsigned numCylinders = spec.cylinders;
+		unsigned numHeads = spec.heads;
+		unsigned numSectors = spec.sectors;
+		unsigned numBytes = spec.bytes;
+		std::cout << fmt::format("writing {} tracks, {} heads, {} sectors, {} bytes per sector",
+						numCylinders, numHeads,
+						numSectors, numBytes)
+				<< std::endl;
+
+        Bytes trackDirectory;
+        ByteWriter trackDirectoryWriter(trackDirectory);
+        int trackDirectorySize = 0;
+        trackDirectoryWriter.write_le16(0);
+
+		for (int track = 0; track < numCylinders; track++)
+		{
+			for (int head = 0; head < numHeads; head++)
+			{
+                Bytes trackHeader;
+                ByteWriter trackHeaderWriter(trackHeader);
+
+                int actualSectors = 0;
+				for (int sectorId = 0; sectorId < numSectors; sectorId++)
+				{
+					const auto& sector = sectors.get(track, head, sectorId);
+					if (sector)
+                        actualSectors++;
+                }
+
+                trackHeaderWriter.write_le16(0x000C); /* offset of sector headers */
+                trackHeaderWriter.write_le16(0x0012); /* length of each sector descriptor */
+                trackHeaderWriter.write_le16(actualSectors);
+                trackHeaderWriter.write_8(0); /* data rate unknown */
+                trackHeaderWriter.write_8(0); /* recording mode unknown */
+                trackHeaderWriter.write_8(0); /* format gap length */
+                trackHeaderWriter.write_8(0); /* filler byte */
+                trackHeaderWriter.write_le16(0); /* approximate track length */
+
+				for (int sectorId = 0; sectorId < numSectors; sectorId++)
+				{
+					const auto& sector = sectors.get(track, head, sectorId);
+					if (sector)
+					{
+                        uint32_t sectorLabel = (('S') << 24) | ((track & 0xff) << 16) | (head << 8) | sectorId;
+                        uint32_t sectorAddress = ldbs.put(sector->data, sectorLabel);
+
+                        trackHeaderWriter.write_8(track);
+                        trackHeaderWriter.write_8(head);
+                        trackHeaderWriter.write_8(sectorId);
+                        trackHeaderWriter.write_8(0); /* power-of-two size */
+                        trackHeaderWriter.write_8((sector->status == Sector::OK) ? 0x00 : 0x20); /* 8272 status 1 */
+                        trackHeaderWriter.write_8(0); /* 8272 status 2 */
+                        trackHeaderWriter.write_8(1); /* number of copies */
+                        trackHeaderWriter.write_8(0); /* filler byte */
+                        trackHeaderWriter.write_le32(sectorAddress);
+                        trackHeaderWriter.write_le16(0); /* trailing bytes */
+                        trackHeaderWriter.write_le16(0); /* approximate offset */
+                        trackHeaderWriter.write_le16(sector->data.size());
+					}
+				}
+
+                uint32_t trackLabel = (('T') << 24) | ((track & 0xff) << 16) | ((track >> 8) << 8) | head;
+                uint32_t trackHeaderAddress = ldbs.put(trackHeader, trackLabel);
+                trackDirectoryWriter.write_be32(trackLabel);
+                trackDirectoryWriter.write_le32(trackHeaderAddress);
+                trackDirectorySize++;
+			}
+		}
+
+        trackDirectoryWriter.seek(0);
+        trackDirectoryWriter.write_le16(trackDirectorySize);
+
+        uint32_t trackDirectoryAddress = ldbs.put(trackDirectory, LDBS_TRACK_BLOCK);
+        Bytes data = ldbs.write(trackDirectoryAddress);
+        data.writeToFile(spec.filename);
+    }
+};
+
+std::unique_ptr<ImageWriter> ImageWriter::createLDBSImageWriter(
+	const SectorSet& sectors, const ImageSpec& spec)
+{
+    return std::unique_ptr<ImageWriter>(new LDBSImageWriter(sectors, spec));
+}
--- a/lib/ldbs.cc
+++ b/lib/ldbs.cc
@@ -0,0 +1,81 @@
+#include "globals.h"
+#include <string.h>
+#include "bytes.h"
+#include "ldbs.h"
+#include "fmt/format.h"
+
+LDBS::LDBS()
+{}
+
+uint32_t LDBS::put(const Bytes& data, uint32_t type)
+{
+    uint32_t address = top;
+    Block& block = blocks[address];
+    block.type = type;
+    block.data = data;
+
+    top += data.size() + 20;
+    return address;
+}
+
+uint32_t LDBS::read(const Bytes& data)
+{
+    ByteReader br(data);
+
+    br.seek(0);
+    if ((br.read_be32() != LDBS_FILE_MAGIC)
+        || (br.read_be32() != LDBS_FILE_TYPE))
+        Error() << "not a valid LDBS file";
+
+    uint32_t address = br.read_le32();
+    br.skip(4);
+    uint32_t trackDirectory = br.read_le32();
+
+    while (address)
+    {
+        br.seek(address);
+        if (br.read_be32() != LDBS_BLOCK_MAGIC)
+            Error() << fmt::format("invalid block at address 0x{:x}", address);
+
+        Block& block = blocks[address];
+        block.type = br.read_be32();
+
+        uint32_t size = br.read_le32();
+        br.skip(4);
+        address = br.read_le32();
+
+        block.data.writer().append(br.read(size));
+    }
+        
+    top = data.size();
+    return trackDirectory;
+}
+
+const Bytes LDBS::write(uint32_t trackDirectory)
+{
+    Bytes data(top);
+    ByteWriter bw(data);
+
+    uint32_t previous = 0;
+    for (const auto& e : blocks)
+    {
+        bw.seek(e.first);
+        bw.write_be32(LDBS_BLOCK_MAGIC);
+        bw.write_be32(e.second.type);
+        bw.write_le32(e.second.data.size());
+        bw.write_le32(e.second.data.size());
+        bw.write_le32(previous);
+        bw.append(e.second.data);
+
+        previous = e.first;
+    }
+
+    bw.seek(0);
+    bw.write_be32(LDBS_FILE_MAGIC);
+    bw.write_be32(LDBS_FILE_TYPE);
+    bw.write_le32(previous);
+    bw.write_le32(0);
+    bw.write_le32(trackDirectory);
+    
+    return data;
+}
--- a/lib/ldbs.h
+++ b/lib/ldbs.h
@@ -0,0 +1,41 @@
+#ifndef LDBS_H
+#define LDBS_H
+
+class Bytes;
+
+/* A very simple interface to John Elliott's LDBS image format:
+ * http://www.seasip.info/Unix/LibDsk/ldbs.html
+ */
+
+#define LDBS_FILE_MAGIC 0x4C425301 /* "LBS\01" */
+#define LDBS_FILE_TYPE 0x44534B02 /* "DSK\02" */
+#define LDBS_BLOCK_MAGIC 0x4C444201 /* "LDB\01" */
+#define LDBS_TRACK_BLOCK 0x44495201 /* "DIR\01" */
+
+class LDBS
+{
+public:
+    LDBS();
+
+public:
+    const Bytes& get(uint32_t address) const
+    { return blocks.at(address).data; }
+
+    uint32_t put(const Bytes& data, uint32_t type);
+
+public:
+    const Bytes write(uint32_t trackDirectory);
+    uint32_t read(const Bytes& bytes);
+
+private:
+    struct Block
+    {
+        uint32_t type;
+        Bytes data;
+    };
+
+    std::map<uint32_t, Block> blocks;
+    unsigned top = 20;
+};
+
+#endif
--- a/lib/reader.cc
+++ b/lib/reader.cc
@@ -23,6 +23,11 @@ static DataSpecFlag source(
    "source for data",
    ":t=0-79:s=0-1:d=0");

+static DataSpecFlag output(
+	{ "--output", "-o" },
+	"output image file to write to",
+	"");
+
 static StringFlag destination(
    { "--write-flux", "-f" },
    "write the raw magnetic flux to this file",
@@ -52,6 +57,11 @@ void setReaderDefaultSource(const std::string& source)
    ::source.set(source);
 }

+void setReaderDefaultOutput(const std::string& output)
+{
+    ::output.set(output);
+}
+
 void setReaderRevolutions(int revolutions)
 {
 	setHardwareFluxSourceRevolutions(revolutions);
@@ -71,9 +81,9 @@ void Track::readFluxmap()

 std::vector<std::unique_ptr<Track>> readTracks()
 {
-    const DataSpec& dataSpec = source;
+    const FluxSpec spec(source);

-    std::cout << "Reading from: " << dataSpec << std::endl;
+    std::cout << "Reading from: " << source << std::endl;

 	setHardwareFluxSourceDensity(highDensityFlag);

@@ -92,10 +102,10 @@ std::vector<std::unique_ptr<Track>> readTracks()
 		);
 	}

-	std::shared_ptr<FluxSource> fluxSource = FluxSource::create(dataSpec);
+	std::shared_ptr<FluxSource> fluxSource = FluxSource::create(spec);

 	std::vector<std::unique_ptr<Track>> tracks;
-    for (const auto& location : dataSpec.locations)
+    for (const auto& location : spec.locations)
 	{
 		auto track = std::make_unique<Track>(location.track, location.side);
 		track->fluxsource = fluxSource;
@@ -140,8 +150,10 @@ static void replace_sector(std::unique_ptr<Sector>& replacing, Sector& replaceme
 	}
 }

-void readDiskCommand(AbstractDecoder& decoder, const std::string& outputFilename)
+void readDiskCommand(AbstractDecoder& decoder)
 {
+	const ImageSpec outputSpec(output);
+
 	bool failures = false;
 	SectorSet allSectors;
 	auto tracks = readTracks();
@@ -160,8 +172,9 @@ void readDiskCommand(AbstractDecoder& decoder, const std::string& outputFilename
 					track->rawrecords.size(),
 					track->sectors.size());
 				if (track->sectors.size() > 0)
-					std::cout << fmt::format("{:.2f}us clock; ",
-						track->sectors.begin()->clock / 1000.0);
+					std::cout << fmt::format("{:.2f}us clock ({:.0f}kHz); ",
+						track->sectors.begin()->clock / 1000.0,
+                        1000000.0 / track->sectors.begin()->clock);

 				for (auto& sector : track->sectors)
 				{
@@ -238,8 +251,7 @@ void readDiskCommand(AbstractDecoder& decoder, const std::string& outputFilename
        std::cout << size << " bytes decoded." << std::endl;
    }

-	Geometry geometry = guessGeometry(allSectors);
-    writeSectorsToFile(allSectors, geometry, outputFilename);
+    writeSectorsToFile(allSectors, outputSpec);
 	if (failures)
 		std::cerr << "Warning: some sectors could not be decoded." << std::endl;
 }
--- a/lib/reader.h
+++ b/lib/reader.h
@@ -11,10 +11,11 @@ class Track;
 extern FlagGroup readerFlags;

 extern void setReaderDefaultSource(const std::string& source);
+extern void setReaderDefaultOutput(const std::string& output);
 extern void setReaderRevolutions(int revolutions);

 extern std::vector<std::unique_ptr<Track>> readTracks();

-extern void readDiskCommand(AbstractDecoder& decoder, const std::string& outputFilename);
+extern void readDiskCommand(AbstractDecoder& decoder);

 #endif
--- a/lib/sectorset.cc
+++ b/lib/sectorset.cc
@@ -18,8 +18,9 @@ Sector* SectorSet::get(int track, int head, int sector) const
 	return i->second.get();
 }

-void SectorSet::calculateSize(int& numTracks, int& numHeads, int& numSectors,
-	int& sectorSize) const
+void SectorSet::calculateSize(
+	unsigned& numTracks, unsigned& numHeads,
+	unsigned& numSectors, unsigned& sectorSize) const
 {
 	numTracks = numHeads = numSectors = sectorSize = 0;

@@ -28,10 +29,10 @@ void SectorSet::calculateSize(int& numTracks, int& numHeads, int& numSectors,
 		auto& sector = i.second;
 		if (sector)
 		{
-			numTracks = std::max(numTracks, sector->logicalTrack+1);
-			numHeads = std::max(numHeads, sector->logicalSide+1);
-			numSectors = std::max(numSectors, sector->logicalSector+1);
-			sectorSize = std::max(sectorSize, (int)sector->data.size());
+			numTracks = std::max(numTracks, (unsigned)sector->logicalTrack+1);
+			numHeads = std::max(numHeads, (unsigned)sector->logicalSide+1);
+			numSectors = std::max(numSectors, (unsigned)sector->logicalSector+1);
+			sectorSize = std::max(sectorSize, (unsigned)sector->data.size());
 		}
 	}
 }
--- a/lib/sectorset.h
+++ b/lib/sectorset.h
@@ -17,8 +17,9 @@ public:
 	std::unique_ptr<Sector>& get(int track, int head, int sector);
 	Sector* get(int track, int head, int sector) const;

-	void calculateSize(int& numTracks, int& numHeads, int& numSectors,
-		int& sectorSize) const;
+	void calculateSize(
+		unsigned& numTracks, unsigned& numHeads, unsigned& numSectors,
+		unsigned& sectorSize) const;

 private:
 	std::map<const key_t, std::unique_ptr<Sector>> _data;
--- a/lib/writer.cc
+++ b/lib/writer.cc
@@ -6,9 +6,14 @@
 #include "protocol.h"
 #include "usb.h"
 #include "dataspec.h"
+#include "encoders/encoders.h"
 #include "fluxsource/fluxsource.h"
 #include "fluxsink/fluxsink.h"
 #include "fmt/format.h"
+#include "record.h"
+#include "image.h"
+#include "sector.h"
+#include "sectorset.h"

 FlagGroup writerFlags { &hardwareFluxSourceFlags };

@@ -17,6 +22,11 @@ static DataSpecFlag dest(
    "destination for data",
    ":d=0:t=0-79:s=0-1");

+static DataSpecFlag input(
+    { "--input", "-i" },
+    "input image file to read from",
+    "");
+
 static SettableFlag highDensityFlag(
 	{ "--high-density", "-H" },
 	"set the drive to high density mode");
@@ -28,12 +38,17 @@ void setWriterDefaultDest(const std::string& dest)
    ::dest.set(dest);
 }

+void setWriterDefaultInput(const std::string& input)
+{
+    ::input.set(input);
+}
+
 void writeTracks(
 	const std::function<std::unique_ptr<Fluxmap>(int track, int side)> producer)
 {
-    const DataSpec& spec = dest;
+    const FluxSpec spec(dest);

-    std::cout << "Writing to: " << spec << std::endl;
+    std::cout << "Writing to: " << dest << std::endl;

 	setHardwareFluxSourceDensity(highDensityFlag);
 	setHardwareFluxSinkDensity(highDensityFlag);
@@ -60,10 +75,12 @@ void writeTracks(
        {
            if (!outdb)
            {
-                std::cout << "erasing" << std::endl;
+                std::cout << "erasing\n";
                usbSeek(location.track);
                usbErase(location.side);
            }
+            else
+                std::cout << "skipping\n";
        }
        else
        {
@@ -96,3 +113,14 @@ void fillBitmapTo(std::vector<bool>& bitmap,
 	}
 }

+void writeDiskCommand(AbstractEncoder& encoder)
+{
+    const ImageSpec spec(input);
+	SectorSet allSectors = readSectorsFromFile(spec);
+	writeTracks(
+		[&](int track, int side) -> std::unique_ptr<Fluxmap>
+		{
+			return encoder.encode(track, side, allSectors);
+		}
+	);
+}
--- a/lib/writer.h
+++ b/lib/writer.h
@@ -6,8 +6,11 @@
 extern FlagGroup writerFlags;

 class Fluxmap;
+class AbstractEncoder;
+class Geometry;

 extern void setWriterDefaultDest(const std::string& dest);
+extern void setWriterDefaultInput(const std::string& input);

 extern void writeTracks(const std::function<std::unique_ptr<Fluxmap>(int track, int side)> producer);

@@ -15,5 +18,6 @@ extern void fillBitmapTo(std::vector<bool>& bitmap,
 		unsigned& cursor, unsigned terminateAt,
 		const std::vector<bool>& pattern);
 	
+extern void writeDiskCommand(AbstractEncoder& encoder);

 #endif
--- a/mkninja.sh
+++ b/mkninja.sh
@@ -89,6 +89,33 @@ buildprogram() {
    echo build $prog$EXTENSION : strip $prog-debug$EXTENSION
 }

+buildsimpleprogram() {
+	local prog
+	prog=$1
+	shift
+
+    local flags
+    flags=
+    while true; do
+        case $1 in
+            -*)
+                flags="$flags $1"
+                shift
+                ;;
+
+            *)
+                break
+        esac
+    done
+
+	local src
+	src=$1
+	shift
+
+	buildlibrary lib$prog.a $flags $src
+	buildprogram $prog lib$prog.a "$@"
+}
+
 runtest() {
    local prog
    prog=$1
@@ -110,22 +137,33 @@ buildlibrary libfmt.a \
    dep/fmt/posix.cc \

 buildlibrary libbackend.a \
-    lib/aeslanier/decoder.cc \
-    lib/amiga/decoder.cc \
-    lib/apple2/decoder.cc \
-    lib/brother/decoder.cc \
-    lib/brother/encoder.cc \
+	lib/imagereader/imagereader.cc \
+	lib/imagereader/imgimagereader.cc \
+	lib/imagewriter/d64imagewriter.cc \
+	lib/imagewriter/imagewriter.cc \
+	lib/imagewriter/imgimagewriter.cc \
+	lib/imagewriter/ldbsimagewriter.cc \
+    arch/aeslanier/decoder.cc \
+    arch/amiga/decoder.cc \
+    arch/apple2/decoder.cc \
+    arch/brother/decoder.cc \
+    arch/brother/encoder.cc \
+    arch/c64/decoder.cc \
+    arch/f85/decoder.cc \
+    arch/fb100/decoder.cc \
+    arch/ibm/decoder.cc \
+    arch/macintosh/decoder.cc \
+    arch/mx/decoder.cc \
+    arch/victor9k/decoder.cc \
+    arch/zilogmcz/decoder.cc \
    lib/bytes.cc \
-    lib/c64/decoder.cc \
    lib/common/crunch.c \
    lib/crc.cc \
    lib/dataspec.cc \
    lib/decoders/decoders.cc \
    lib/decoders/fluxmapreader.cc \
    lib/decoders/fmmfm.cc \
-    lib/encoder.cc \
-    lib/f85/decoder.cc \
-    lib/fb100/decoder.cc \
+    lib/encoders/encoders.cc \
    lib/flags.cc \
    lib/fluxmap.cc \
    lib/fluxsink/fluxsink.cc \
@@ -138,21 +176,20 @@ buildlibrary libbackend.a \
    lib/fluxsource/streamfluxsource.cc \
    lib/globals.cc \
    lib/hexdump.cc \
-    lib/ibm/decoder.cc \
    lib/image.cc \
-    lib/macintosh/decoder.cc \
-    lib/mx/decoder.cc \
+    lib/ldbs.cc \
    lib/reader.cc \
    lib/sector.cc \
    lib/sectorset.cc \
    lib/sql.cc \
    lib/usb.cc \
-    lib/victor9k/decoder.cc \
    lib/writer.cc \
-    lib/zilogmcz/decoder.cc \

 buildlibrary libfrontend.a \
+    src/fe-cwftoflux.cc \
    src/fe-erase.cc \
+    src/fe-fluxtoau.cc \
+    src/fe-fluxtovcd.cc \
    src/fe-inspect.cc \
    src/fe-readadfs.cc \
    src/fe-readaeslanier.cc \
@@ -183,32 +220,23 @@ buildprogram fluxengine \
    libbackend.a \
    libfmt.a \

-buildlibrary libbrother120tool.a \
-    -Idep/emu \
-    tools/brother120tool.cc \
-
 buildlibrary libemu.a \
    dep/emu/fnmatch.c

-buildprogram brother120tool \
-    libbrother120tool.a \
+buildsimpleprogram brother120tool \
+	-Idep/emu \
+    tools/brother120tool.cc \
+    libbackend.a \
    libemu.a \
    libfmt.a \

-buildlibrary libcwftoflux.a \
-    tools/cwftoflux.cc \
-
-buildprogram cwftoflux \
-    libcwftoflux.a \
-    libbackend.a \
-    libfmt.a \
-
+runtest bitaccumulator-test tests/bitaccumulator.cc
+runtest bytes-test          tests/bytes.cc
+runtest compression-test    tests/compression.cc
+runtest crunch-test         tests/crunch.cc
 runtest dataspec-test       tests/dataspec.cc
 runtest flags-test          tests/flags.cc
-runtest fmmfm-test          tests/fmmfm.cc
-runtest bitaccumulator-test tests/bitaccumulator.cc
-runtest kryoflux-test       tests/kryoflux.cc
-runtest compression-test    tests/compression.cc
-runtest bytes-test          tests/bytes.cc
-runtest crunch-test         tests/crunch.cc
 runtest fluxpattern-test    tests/fluxpattern.cc
+runtest fmmfm-test          tests/fmmfm.cc
+runtest kryoflux-test       tests/kryoflux.cc
+runtest ldbs-test           tests/ldbs.cc
--- a/src/fe-cwftoflux.cc
+++ b/src/fe-cwftoflux.cc
@@ -37,7 +37,7 @@ static double clockRate;

 static void syntax()
 {
-    std::cout << "Syntax: cwftoflux <cwffile> <fluxfile>\n";
+    std::cout << "Syntax: fluxengine convert cwftoflux <cwffile> <fluxfile>\n";
    exit(0);
 }

@@ -116,7 +116,7 @@ static void read_track()
    sqlWriteFlux(outputDb, track_number, trackheader.side, fluxmap);
 }

-int main(int argc, const char* argv[])
+int mainConvertCwfToFlux(int argc, const char* argv[])
 {
    if (argc != 3)
        syntax();
--- a/src/fe-fluxtoau.cc
+++ b/src/fe-fluxtoau.cc
@@ -0,0 +1,101 @@
+#include "globals.h"
+#include "flags.h"
+#include "fluxmap.h"
+#include "sql.h"
+#include "bytes.h"
+#include "protocol.h"
+#include "dataspec.h"
+#include "fluxsource/fluxsource.h"
+#include "decoders/fluxmapreader.h"
+#include "fmt/format.h"
+#include <fstream>
+
+static FlagGroup flags { &hardwareFluxSourceFlags };
+
+static DataSpecFlag source(
+    { "--source", "-s" },
+    "source for data",
+    ":d=0:t=0:s=0");
+
+static StringFlag output(
+    { "--output", "-o" },
+    "output AU file to write",
+    "output.au");
+
+static SettableFlag highDensityFlag(
+    { "--high-density", "--hd" },
+    "set the drive to high density mode");
+
+static SettableFlag withIndex(
+    { "--with-index" },
+    "place index markers in the right hand channel");
+
+int mainConvertFluxToAu(int argc, const char* argv[])
+{
+    flags.parseFlags(argc, argv);
+
+    FluxSpec spec(source);
+    const auto& locations = spec.locations;
+    if (locations.size() != 1)
+        Error() << "the source dataspec must contain exactly one track (two sides count as two tracks)";
+    const auto& location = *(locations.begin());
+
+    std::cerr << "Reading source flux...\n";
+    setHardwareFluxSourceDensity(highDensityFlag);
+    std::shared_ptr<FluxSource> fluxsource = FluxSource::create(spec);
+    const auto& fluxmap = fluxsource->readFlux(location.track, location.side);
+    unsigned totalTicks = fluxmap->ticks() + 2;
+    unsigned channels = withIndex ? 2 : 1;
+
+    std::cerr << "Writing output file...\n";
+    std::ofstream of(output, std::ios::out | std::ios::binary);
+    if (!of.is_open())
+        Error() << "cannot open output file";
+
+    /* Write header */
+
+    {
+        Bytes header;
+        header.resize(24);
+        ByteWriter bw(header);
+
+        bw.write_be32(0x2e736e64);
+        bw.write_be32(24);
+        bw.write_be32(totalTicks * channels);
+        bw.write_be32(2); /* 8-bit PCM */
+        bw.write_be32(TICK_FREQUENCY);
+        bw.write_be32(channels); /* channels */
+
+        of.write((const char*) header.cbegin(), header.size());
+    }
+
+    /* Write data */
+
+    {
+        Bytes data;
+        data.resize(totalTicks * channels);
+        memset(data.begin(), 0x80, data.size());
+
+        FluxmapReader fmr(*fluxmap);
+        unsigned timestamp = 0;
+        while (!fmr.eof())
+        {
+            unsigned ticks;
+            int op = fmr.readOpcode(ticks);
+            if (op == -1)
+                break;
+            timestamp += ticks;
+
+            if (op == F_OP_PULSE)
+                data[timestamp*channels + 0] = 0x7f;
+            if (withIndex && (op == F_OP_INDEX))
+                data[timestamp*channels + 1] = 0x7f;
+        }
+
+        of.write((const char*) data.cbegin(), data.size());
+    }
+
+    std::cerr << "Done. Warning: do not play this file, or you will break your speakers"
+	         " and/or ears!\n";
+    return 0;
+}
--- a/src/fe-fluxtovcd.cc
+++ b/src/fe-fluxtovcd.cc
@@ -0,0 +1,84 @@
+#include "globals.h"
+#include "flags.h"
+#include "fluxmap.h"
+#include "sql.h"
+#include "bytes.h"
+#include "protocol.h"
+#include "dataspec.h"
+#include "fluxsource/fluxsource.h"
+#include "decoders/fluxmapreader.h"
+#include "fmt/format.h"
+#include <fstream>
+
+static FlagGroup flags { &hardwareFluxSourceFlags };
+
+static DataSpecFlag source(
+    { "--source", "-s" },
+    "source for data",
+    ":d=0:t=0:s=0");
+
+static StringFlag output(
+    { "--output", "-o" },
+    "output VCD file to write",
+    "output.vcd");
+
+static SettableFlag highDensityFlag(
+    { "--high-density", "--hd" },
+    "set the drive to high density mode");
+
+int mainConvertFluxToVcd(int argc, const char* argv[])
+{
+    flags.parseFlags(argc, argv);
+
+    const FluxSpec spec(source);
+    const auto& locations = spec.locations;
+    if (locations.size() != 1)
+        Error() << "the source dataspec must contain exactly one track (two sides count as two tracks)";
+    const auto& location = *(locations.begin());
+
+    std::cerr << "Reading source flux...\n";
+    setHardwareFluxSourceDensity(highDensityFlag);
+    std::shared_ptr<FluxSource> fluxsource = FluxSource::create(spec);
+    const auto& fluxmap = fluxsource->readFlux(location.track, location.side);
+
+    std::cerr << "Writing destination VCD...\n";
+    std::ofstream of(output, std::ios::out);
+    if (!of.is_open())
+        Error() << "cannot open output file";
+
+    of << "$timescale 1ns $end\n"
+       << "$var wire 1 i index $end\n"
+       << "$var wire 1 p pulse $end\n"
+       << "$upscope $end\n"
+       << "$enddefinitions $end\n"
+       << "$dumpvars 0i 0p $end\n";
+
+    FluxmapReader fmr(*fluxmap);
+    unsigned timestamp = 0;
+    unsigned lasttimestamp = 0;
+    while (!fmr.eof())
+    {
+        unsigned ticks;
+        int op = fmr.readOpcode(ticks);
+        if (op == -1)
+            break;
+
+        unsigned newtimestamp = timestamp + ticks;
+        if (newtimestamp != lasttimestamp)
+        {
+            of << fmt::format("\n#{} 0i 0p\n", (uint64_t)((lasttimestamp+1) * NS_PER_TICK));
+            timestamp = newtimestamp;
+            of << fmt::format("#{} ", (uint64_t)(timestamp * NS_PER_TICK));
+        }
+
+        if (op == F_OP_PULSE)
+            of << "1p ";
+        if (op == F_OP_INDEX)
+            of << "1i ";
+
+        lasttimestamp = timestamp;
+    }
+    of << "\n";
+
+    return 0;
+}
--- a/src/fe-inspect.cc
+++ b/src/fe-inspect.cc
@@ -12,7 +12,7 @@
 #include "track.h"
 #include "fmt/format.h"

-static FlagGroup flags;
+static FlagGroup flags { &readerFlags };

 static SettableFlag dumpFluxFlag(
 	{ "--dump-flux", "-F" },
--- a/src/fe-readadfs.cc
+++ b/src/fe-readadfs.cc
@@ -12,11 +12,6 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "adfs.img");
-
 static IntFlag sectorIdBase(
 	{ "--sector-id-base" },
 	"Sector ID of the first sector.",
@@ -25,10 +20,11 @@ static IntFlag sectorIdBase(
 int mainReadADFS(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0-1");
+	setReaderDefaultOutput("adfs.img");
    flags.parseFlags(argc, argv);

 	IbmDecoder decoder(sectorIdBase);
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);
    return 0;
 }

--- a/src/fe-readaeslanier.cc
+++ b/src/fe-readaeslanier.cc
@@ -20,11 +20,12 @@ static StringFlag outputFilename(
 int mainReadAESLanier(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0");
+	setReaderDefaultOutput("aeslanier.img");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	AesLanierDecoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);
    return 0;
 }

--- a/src/fe-readamiga.cc
+++ b/src/fe-readamiga.cc
@@ -13,19 +13,15 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "amiga.adf");
-
 int mainReadAmiga(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0-1");
+	setReaderDefaultOutput("amiga.adf:c=80:h=2:s=11:b=512");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	AmigaDecoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);

    return 0;
 }
--- a/src/fe-readampro.cc
+++ b/src/fe-readampro.cc
@@ -12,11 +12,6 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "ampro.img");
-
 static IntFlag sectorIdBase(
 	{ "--sector-id-base" },
 	"Sector ID of the first sector.",
@@ -25,11 +20,12 @@ static IntFlag sectorIdBase(
 int mainReadAmpro(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0");
+	setReaderDefaultOutput("ampro.adf");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	IbmDecoder decoder(sectorIdBase);
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);
    return 0;
 }

--- a/src/fe-readapple2.cc
+++ b/src/fe-readapple2.cc
@@ -13,19 +13,15 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "apple2.img");
-
 int mainReadApple2(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0");
+	setReaderDefaultOutput("apple2.adf");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	Apple2Decoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);

    return 0;
 }
--- a/src/fe-readbrother.cc
+++ b/src/fe-readbrother.cc
@@ -3,6 +3,7 @@
 #include "reader.h"
 #include "fluxmap.h"
 #include "decoders/decoders.h"
+#include "encoders/encoders.h"
 #include "brother/brother.h"
 #include "sector.h"
 #include "sectorset.h"
@@ -13,19 +14,15 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "brother.img");
-
 int mainReadBrother(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-81:s=0");
+	setReaderDefaultOutput("brother.img");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	BrotherDecoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);

    return 0;
 }
--- a/src/fe-readc64.cc
+++ b/src/fe-readc64.cc
@@ -13,19 +13,15 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "c64.img");
-
 int mainReadC64(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79x2:s=0");
+	setReaderDefaultOutput("c64.d64");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	Commodore64Decoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);

    return 0;
 }
--- a/src/fe-readdfs.cc
+++ b/src/fe-readdfs.cc
@@ -12,11 +12,6 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "dfs.img");
-
 static IntFlag sectorIdBase(
 	{ "--sector-id-base" },
 	"Sector ID of the first sector.",
@@ -25,11 +20,12 @@ static IntFlag sectorIdBase(
 int mainReadDFS(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0");
+	setReaderDefaultOutput("dfs.img");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	IbmDecoder decoder(sectorIdBase);
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);
    return 0;
 }

--- a/src/fe-readf85.cc
+++ b/src/fe-readf85.cc
@@ -13,19 +13,15 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "f85.img");
-
 int mainReadF85(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0");
+	setReaderDefaultOutput("f85.img");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	DurangoF85Decoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);

    return 0;
 }
--- a/src/fe-readfb100.cc
+++ b/src/fe-readfb100.cc
@@ -12,19 +12,15 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "fb100.img");
-
 int mainReadFB100(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79x2:s=0");
+	setReaderDefaultOutput("fb100.img");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	Fb100Decoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);
    return 0;
 }

--- a/src/fe-readibm.cc
+++ b/src/fe-readibm.cc
@@ -12,11 +12,6 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "ibm.img");
-
 static IntFlag sectorIdBase(
 	{ "--sector-id-base" },
 	"Sector ID of the first sector.",
@@ -25,10 +20,11 @@ static IntFlag sectorIdBase(
 int mainReadIBM(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0-1");
+	setReaderDefaultOutput("ibm.img");
    flags.parseFlags(argc, argv);

 	IbmDecoder decoder(sectorIdBase);
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);
    return 0;
 }

--- a/src/fe-readmac.cc
+++ b/src/fe-readmac.cc
@@ -13,19 +13,15 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "mac.img");
-
 int mainReadMac(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0-1");
+	setReaderDefaultOutput("mac.img");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	MacintoshDecoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);

    return 0;
 }
--- a/src/fe-readmx.cc
+++ b/src/fe-readmx.cc
@@ -12,18 +12,14 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "mx.img");
-
 int mainReadMx(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0-1");
+	setReaderDefaultOutput("mx.img");
    flags.parseFlags(argc, argv);

 	MxDecoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);
    return 0;
 }

--- a/src/fe-readvictor9k.cc
+++ b/src/fe-readvictor9k.cc
@@ -13,19 +13,15 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "victor9k.img");
-
 int mainReadVictor9K(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-79:s=0");
+	setReaderDefaultOutput("victor9k.img");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	Victor9kDecoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);

    return 0;
 }
--- a/src/fe-readzilogmcz.cc
+++ b/src/fe-readzilogmcz.cc
@@ -12,19 +12,15 @@

 static FlagGroup flags { &readerFlags };

-static StringFlag outputFilename(
-    { "--output", "-o" },
-    "The output image file to write to.",
-    "zilogmcz.img");
-
 int mainReadZilogMCZ(int argc, const char* argv[])
 {
 	setReaderDefaultSource(":t=0-76:s=0");
+	setReaderDefaultOutput("zilogmcz.img");
    setReaderRevolutions(2);
    flags.parseFlags(argc, argv);

 	ZilogMczDecoder decoder;
-	readDiskCommand(decoder, outputFilename);
+	readDiskCommand(decoder);
    return 0;
 }

--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
David Given	28d0ce765e	Merge pull request #93 from davidgiven/hex Add precompiled firmware	2019-08-15 22:26:50 +02:00
David Given	4954d33307	Add documentation for using the precompiled firmware.	2019-08-15 22:19:30 +02:00
David Given	55f3354287	Add precompiled hex for the firmware.	2019-08-15 21:52:11 +02:00
David Given	d6ae373fa8	Merge pull request #92 from davidgiven/d64 Add write-only support for D64 disk images.	2019-08-15 20:46:02 +02:00
David Given	a626d5f9a0	Add write-only support for D64 disk images.	2019-08-15 20:30:07 +02:00
David Given	29db67528d	Merge pull request #90 from davidgiven/write Add support for writing LDBS image files.	2019-08-10 21:40:56 +02:00
David Given	31d7477c6a	Add LDBS documentation.	2019-08-10 21:35:21 +02:00
David Given	56af9eaf18	The LDBS ST1 field is now populated correctly on error.	2019-08-10 21:25:07 +02:00
David Given	5de0636fe7	First attempt at writing LDBS files. Not quite right.	2019-08-09 23:21:55 +02:00
David Given	f9117b8d11	Added a simple library for reading and writing LDBS files.	2019-08-09 22:41:07 +02:00
David Given	10d385375f	Merge pull request #87 from davidgiven/write Add support for pluggable input and output formats.	2019-08-09 21:22:03 +02:00
David Given	2f72c3f8f0	Mac images now put the metadata second.	2019-08-09 21:13:29 +02:00
David Given	54edff9b94	Amiga disks can now optionally emit the metadata.	2019-08-09 21:04:48 +02:00
David Given	112377f885	Add pluggable image readers, plus some documentation.	2019-08-09 20:56:06 +02:00
David Given	87e29fc386	Merge from write branch (because we want the new image code).	2019-08-08 23:27:11 +02:00
David Given	b1db5c48b1	Ignore more temporary files.	2019-08-08 23:26:42 +02:00
David Given	38fab7edcb	Refactor all the image writing stuff into a ImageWriter subclass hierarchy with a factory based on extension.	2019-08-08 00:27:41 +02:00
David Given	d8172154c3	Output images now get geometry specs to indicate what kind of file to write.	2019-08-07 23:23:07 +02:00
David Given	eb924780ab	Refactor dataspecs to allow them to be used for other things too.	2019-08-06 23:50:02 +02:00
David Given	28e0ef0463	Merge pull request #84 from davidgiven/cleanup Mechanical refactor to rearrange the source files into a more pleasing order.	2019-08-06 22:33:05 +02:00
David Given	4b07c38782	Mechanical refactor to rearrange the source files into a more pleasing order.	2019-08-06 22:25:11 +02:00
David Given	e0256adf77	Merge pull request #83 from davidgiven/write Write code refactoring.	2019-08-06 22:24:40 +02:00
David Given	5748f017dd	Refactor the write code to make it easier to add new encoders.	2019-08-06 22:17:58 +02:00
David Given	973f4c2c2d	Skeleton work to factor out the encoder logic.	2019-08-03 22:30:30 +02:00
David Given	8e1774c69f	Show the clock rate in kHz as well, because that's more useful.	2019-07-12 23:09:50 +02:00
David Given	56a36072f7	Sampler state machine cleanup; more debugging tools for the logic analyser.	2019-07-12 21:09:53 +02:00
David Given	8755d108ed	Sanity check Mac sectors --- reject anything with an out-of-bounds sector ID.	2019-07-11 23:16:02 +02:00
David Given	ea40cd73d1	Merge pull request #78 from davidgiven/mx Bugfixing and documentation for MX disks.	2019-07-11 22:02:24 +02:00
David Given	0e28899b72	Add the page on the MX disk format. Mac disks are now unicorns.	2019-07-11 21:34:01 +02:00
David Given	eee30db981	Honour the logical track numbering in MX disks (allows reading 40-track disks).	2019-07-11 21:03:54 +02:00
David Given	6959d18017	Merge pull request #77 from davidgiven/build Build cleanups	2019-07-11 12:18:59 +02:00
David Given	9f92ce0ef7	Typo fix.	2019-07-11 12:10:36 +02:00
David Given	7658c1d774	Move the fluxtoau tool into the main client.	2019-07-11 12:00:25 +02:00
David Given	31dc3504e6	Move the fluxtovcd file into the main client.	2019-07-11 11:52:38 +02:00
David Given	af0c9d4261	Move cwftoflux into the main client.	2019-07-11 11:45:15 +02:00
David Given	155b9daef6	Clean build scripts a bit.	2019-07-11 11:25:29 +02:00
David Given	a2fdbc5c73	Merge pull request #76 from davidgiven/sampling Minor fixes and debugging tooling	2019-07-11 00:10:18 +02:00
David Given	1e3581c5f3	Turns out I was using the wrong error threshold flags for Mac disks. ND disks work fine now.	2019-07-10 23:55:16 +02:00
David Given	a1d345856e	Add a tool for converting flux files directly to mono or stereo au files, suitable for comparison in Audacity.	2019-07-10 22:56:39 +02:00
David Given	7a775afaea	Make sure that CounterClock is actually 12MHz, and not 12-ish MHz. Doesn't help.	2019-07-10 20:26:17 +02:00
David Given	c27c4fe312	Synchronise input pins and set LVTTL levels. More correct, but doesn't help the read issues.	2019-07-10 19:48:03 +02:00
David Given	ad295c683c	The sampler pulse conversion now uses BUS_CLK as the sample clock.	2019-07-09 22:43:46 +02:00
David Given	3f8fdaa27a	Fix missing flag initialisation.	2019-07-09 22:38:35 +02:00
David Given	9f5d01787f	Fix missing flag initialisation.	2019-07-09 22:38:35 +02:00
David Given	3c4487c42e	Add the tool to export flux files as VCD, so that they can be read into pulseview.	2019-07-09 00:48:35 +02:00
David Given	e5c2168a35	Merge.	2019-07-08 23:32:53 +02:00
David Given	98ea5e9600	Connect up pins 2.3, 2.4 and 2.5 for debugging with a logic analyser.	2019-07-08 01:08:05 +02:00
David Given	ce6077fa22	Apply Denis Kushch's timing fixes to the schematic. No more warnings on builds!	2019-07-08 00:52:59 +02:00